1980 Jeep Cherokee Performance and Racing Products
Find Your Specific 1980 Jeep Cherokee Performance and Racing Products
Below you will find various in-demand Jeep Performance and Racing Products, components and accessories for your 1980 Cherokee. Advance Auto Parts has popular Cherokee parts like Performance Distributors, Performance Ignition Products, Performance Fuel Systems and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Cherokee model years including
2014,
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022 and more. Select a category of 1980 Jeep Cherokee Performance and Racing Products below and start saving instantly.
Popular 1980 Jeep Cherokee Performance and Racing Products Categories
Essential Performance and Racing Products for 1980 Jeep Cherokees
Mallory – Unilite Ignition Module (Part No.605)
from
$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Edelbrock – Water Pump AMC Long Style 1973-Later (Part No.8832)
from
$365.99
Edelbrock #8832 Water Pump AMC long style 1973-later ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “super cooling” Water Pumps
Product Features:
See More
Product Features:
- Standard Impeller Rotation
- 0.625 in. Pilot Shaft
- 0.750 in. Ball/Ball Bearing
- 4.1875 in. Block To Hub Height
- Satin Finish
Accel – GM 1984-95 Remote Supercoil (Part No.140011)
from
$88.99
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Compatible with late model GM computer controlled remote mount HEI systems. Direct bolt-in, plug-in replacement. Brass coil wire contact increases energy transfer and resists corrosion better than aluminum. Complete with new mounting hardware.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Standard Motor Products SMP DR-37
- MSD 8226
- Resist Corrosion
- W/New Mounting Hardware
K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-2003)
from
$19.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Product Features:
See More
Product Features:
- Designed to allow high flow rates and a consistent flow of oil to your engine
- Pleated synthetic-blend filtration media removes most harmful contaminants
- Fast and easy Wrench-Off removal using the welded one-inch hex nut
- High capacity to withstand the service intervals recommended by vehicle manufacturers
- Heavy-duty canister for outstanding durability
- Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
- Designed to operate with all synthetic, conventional, and blended motor oils
- 1-Year Limited Warranty
Energy Suspension – Motor Mount (Part No.2.1104G)
from
$74.99
A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.
Product Features:
See More
Product Features:
- Gains Both Performance and Longevity
- Will Handle Any and All Torque
- Out Lasts Rubber
Edelbrock – Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79 (Part No.5792)
from
$149.99
Product Features:
See More
- Non-Rotator Type
- 1.550 in. Outer Diameter
- .190 Wire Size
- Single Coil Spring Type
- Set of 16
Edelbrock – Performer 1400 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1400)
from
$523.99
The Edelbrock 1400 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Electric Choke
- 4 Barrel Count
- Square Bore
- Electric Choke Installed from Factory
- Smooth Secondary Transition
- Includes Only Timed Vacuum Port
- Includes EGR ; Fuel Vapor Outlet
Edelbrock – Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1405)
from
$394.99
The Edelbrock 1405 Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1405 Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Manual Choke
- 4 Barrel Count
- Square Bore
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
Competition Cams – VALVE SEALS, TEFLON 3/8" 1 ST (Part No.505-16)
from
$33.99
COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.
Product Features:
See More
Product Features:
- Work with .530″ guides and 3/8″ valve stem diameter
- Valve stem oil seals keep unwanted oil from entering the combustion chamber
- Several different types of valve seals are offered
Edelbrock – RPM Air-Gap AMC 304/360/401 Intake Manifold (Part No.7531)
from
$530.99
Edelbrock part #7531 RPM Air-Gap AMC intake manifold is designed for 1970-91 304-401 c.i.d. V8 applications. The RPM Air-Gap intake manifold incorporate the same race-winning technology as our Victor Series competition intakes. The air-gap design features
Product Features:
See More
Product Features:
- Based on Performer RPM-Series with Unique Air Gap
- Air Gap Cooler and Denser Mixture for More Power
- Designed for 1500 to 6500 RPM Street-Driven Power
- Dual-Plane High-Rise Intake w/180 deg Firing Order
- Produces Incredible Top-End Horsepower
- Retains Good Throttle Response and Acceleration
- Includes Std Oil Fill ; PCV ; A/C Accy Bosses
- Not for Exhaust-Heat Chokes – No Exhaust Crossover
Edelbrock – Performer Top Small-Block Chevy 4V Intake Manifold (Part No.3789)
from
$216.99
Product Features:
See More
- Matching Top For Edelbrock Base Intake PN[3785]
- Designed for Standard Flange 4-barrel Carburetor
- Contains Necessary Linkage And Bracketry
- Match With Edelbrock Valve Covers Pn[4488]
MSD Ignition – Distributor; 6-cyl. AMC Jeep 232-258; 4.0L (Part No.8516)
from
$665.99
There is a big following of AMC enthusiasts that are cruising a 401 equipped Javelin or trail blazing in a rock crawling Jeep with an inline 6-cylinder! MSD offers two Pro-Billet Distributors to deliver accurate trigger signals and are maintenance-free! This pick-up never requires adjustment and simply plugs right into an MSD Ignition Control. Just above it and under our strong race rotor is an adjustable mechanical advance assembly. The chro-moly weights of this assembly slide on nylon bushings producing smooth movement of the timing. You can easily adjust the curve to match your engine’s requirements with the supplied springs and stop bushings. Each precision CNC-machined billet aluminum housing features a sealed ball-bearing and long sintered bushing for stability at any rpm and increased endurance. An oversized steel shaft receives a QPQ coating to reduce friction and prevent corrosion. Both distributors are supplied with a high quality cap, rotor and gear. There is even a vacuum advance canister for street cruising economy!
Product Features:
See More
Product Features:
- Designed For Street/Performance Use w/Mech or Vacuum Advance
- Must Be Used w/An MSD Ignition Control
- Supplied w/Socket Style Distributor Cap And Rotor
- Nylon pads ensure smooth operation of the advance weights
- Advance weight pins are staked and tig welded to the plate
- Mech. advance assem. can be locked out for crank trigger systems
- Advance plate and weights are fine blanked from chrome moly steel
- QPQ coated for friction reduction
Mallory – Unilite Electronic Ignition Distributor Series 37 (Part No.3760001)
from
$614.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.
Product Features:
See More
Product Features:
- Improved Combustion And Economy
- Increased Spark Plug Life
- Improved Cold Weather Starting
- Maintenance Free Operation
- Accurate Spark Timing
- Self-Lubricating Bushings
- Years Of Trouble-Free Service
Rugged Ridge – Heavy Duty Differential Skid Plate (Part No.16597.35)
from
$114.99
Protect your factory differential cover with these heavy duty skid plates. Designed to fit the contours of your stock differential cover and made of durable 3/16-inch black powdercoated steel, these skid plates will help you slide over obstacles.
Product Features:
See More
Product Features:
- Black Powder Coated
- 3/16 in. Steel
- Use w/ Factory Diff Cover
- Mounting Hardware Included
Rugged Ridge – Skid Plate (Part No.DMC-16597.44)
from
$205.99
Protect your factory differential cover with These heavy-duty skid plates. Designed to fit the contours of your stock differential cover. Constructed of durable 3/16 in. black powder coated steel, these skid plates will help you slide over obstacles and not get hung up. Includes replacement mounting hardware and instructions. Will not fit Aluminum Housing D44A.
Product Features:
See More
Product Features:
- Black Powder Coated
- 3/16 in. Steel
- Use w/Factory Diff Cover
- Mounting Hardware Included
- Jeep Logo
Mr. Gasket – High Performance Thermostat (Part No.4365)
from
$32.49
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 195 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)
from
$55.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Mr. Gasket – Thermocap Radiator Cap (Part No.2471S)
from
$53.99
Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.
Product Features:
See More
Product Features:
- Indicates Coolant Temperature
- Helps to Prevent Injuries from coolant or steam burns
- Integrated Coolant Reclamation Valve
- Improves Underhood Appearance
- Fahrenheit and centigrade readings
- Various valve pressures available
Upgrade your 1980 Jeep Cherokee with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1980 Jeep Cherokee, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Performance and Racing Products are key to keeping your Cherokee functioning at its best. At Advance Auto Parts, we offer a wide selection of 38 Performance and Racing Products for the 1980 Jeep Cherokee, designed to meet your needs without breaking the bank.
From
Performance Distributor
replacements to
Performance Ignition Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1980 Jeep Cherokee at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $7.99 to $858.99, with
an average price of $230.01.
Our 38 Performance and Racing Products in stock come from 10 trusted brands, so you’re sure to find the right part for your 1980 Jeep Cherokee without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1980 Jeep Cherokee, we stock popular OEM and aftermarket Performance and Racing Products from top names
like K&N, Competition Cams, Accel, and more.
K&N Performance and Racing Products
start at just $19.99 and boast an impressive 4.8 stars average rating from customers.
Competition Cams and Accel also bring quality to the table, with Performance and Racing Products available starting at $33.99, and at an average 4.1 stars rating.
With 164 customer reviews and counting, our 1980 Jeep Cherokee Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1980 Jeep Cherokee is always ready to roll. We’re committed to providing you with everything you need to keep your Cherokee in top shape, all in one place.
Start shopping confidently below for your 1980 Jeep Cherokee!
Best-Selling Performance Distributors for 1980 Jeep Cherokees
Enhance the driving experience in your Jeep with 2 quality Performance Distributor components, starting at $614.99.
MSD Ignition – Distributor; 6-cyl. AMC Jeep 232-258; 4.0L (Part No.8516)
from
$665.99
There is a big following of AMC enthusiasts that are cruising a 401 equipped Javelin or trail blazing in a rock crawling Jeep with an inline 6-cylinder! MSD offers two Pro-Billet Distributors to deliver accurate trigger signals and are maintenance-free! This pick-up never requires adjustment and simply plugs right into an MSD Ignition Control. Just above it and under our strong race rotor is an adjustable mechanical advance assembly. The chro-moly weights of this assembly slide on nylon bushings producing smooth movement of the timing. You can easily adjust the curve to match your engine’s requirements with the supplied springs and stop bushings. Each precision CNC-machined billet aluminum housing features a sealed ball-bearing and long sintered bushing for stability at any rpm and increased endurance. An oversized steel shaft receives a QPQ coating to reduce friction and prevent corrosion. Both distributors are supplied with a high quality cap, rotor and gear. There is even a vacuum advance canister for street cruising economy!
Product Features:
See More
Product Features:
- Designed For Street/Performance Use w/Mech or Vacuum Advance
- Must Be Used w/An MSD Ignition Control
- Supplied w/Socket Style Distributor Cap And Rotor
- Nylon pads ensure smooth operation of the advance weights
- Advance weight pins are staked and tig welded to the plate
- Mech. advance assem. can be locked out for crank trigger systems
- Advance plate and weights are fine blanked from chrome moly steel
- QPQ coated for friction reduction
Mallory – Unilite Electronic Ignition Distributor Series 37 (Part No.3760001)
from
$614.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.
Product Features:
See More
Product Features:
- Improved Combustion And Economy
- Increased Spark Plug Life
- Improved Cold Weather Starting
- Maintenance Free Operation
- Accurate Spark Timing
- Self-Lubricating Bushings
- Years Of Trouble-Free Service
Most Popular 1980 Jeep Cherokee Performance Ignition Products
Customize your Jeep with 4 Performance Ignition Products products
like Performance Coils and
Performance Ignition Parts, all
priced under $204.99.
Accel – High Energy Ignition Coil for GM HEI – 1973-1991 (Part No.140003)
from
$102.99
Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Standard Motor Products SMP Dr-31
- MSD 8225
Mallory – Unilite Ignition Module (Part No.605)
from
$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Top Picks for 1980 Jeep Cherokee Performance Fuel Systems
Upgrade Jeep Cherokees with top-quality Performance Fuel Systems parts, including 1 OEM and aftermarket selections for your 1980 model.
Omix – EMPI Carburetor; 300CFM; 72-90 Jeep CJ/Wrangler YJ (Part No.17702.08)
from
$775.99
Omix proudly offers all the parts you need to keep your Willys/Jeep running like new with quality standards that always meet or exceed those of the factory part. This replacement EMPI design 300 cfm carb is an upgrade for Carter 2-barrel carbs on 72-83 CJ5 4.2 liter, 76-83 CJ7 3.8/4.2 liter, 81-86 CJ8 4.2 liter and 87-90 Wrangler YJ 4.2 liter models. Kit includes carb, base plate, air cleaner assembly, fuel hoses, clamps, hardware and instructions.
Product Features:
See More
Product Features:
- Upgrade
- 34mm DGEV
- Replaces Carter 2 Barrel YF
- Up To 18 Percent HP Gain
- Includes Everything Needed For Installation
In-Demand Performance Engines for 1980 Jeep Cherokees
Select from 26 premium Performance Engines parts for your 1980 Jeep Cherokee, with prices ranging from $7.99 to $858.99.
Competition Cams – VALVE SEALS, TEFLON 3/8" 1 ST (Part No.505-16)
from
$33.99
COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.
Product Features:
See More
Product Features:
- Work with .530″ guides and 3/8″ valve stem diameter
- Valve stem oil seals keep unwanted oil from entering the combustion chamber
- Several different types of valve seals are offered
Mr. Gasket – High Performance Thermostat (Part No.4365)
from
$32.49
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 195 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Edelbrock – Performer EGR AMC Intake Manifold (Part No.3731)
from
$509.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
Competition Cams – High Energy 218/218 Hydraulic Flat Cam K-Kit for AMC 290-401 (Part No.K10-202-4)
from
$858.99
High Energy 218/218 Hydraulic Flat Cam K-Kit for AMC 290-401
Competition Cams – Thumpr 227/241 Hydraulic Flat Cam and Lifter Kit for AMC 290-401 (Part No.CL10-600-5)
from
$656.99
Thumpr 227/241 Hydraulic Flat Cam and Lifter Kit for AMC 290-401
Competition Cams – High Energy 218/218 Hydraulic Flat Cam and Lifter Kit for AMC 290-401 (Part No.CL10-202-4)
from
$618.99
High Energy 218/218 Hydraulic Flat Cam and Lifter Kit for AMC 290-401
Competition Cams – Magnum 224/224 Hydraulic Flat Cam and Lifter Kit for AMC 290-401 (Part No.CL10-203-4)
from
$598.99
Magnum 224/224 Hydraulic Flat Cam and Lifter Kit for AMC 290-401
Competition Cams – Xtreme 4X4 206/214 Hydraulic Flat Cam and Lifter Kit for AMC/Jeep 199-258/4.0L (Part No.CL68-231-4)
from
$559.99
Xtreme 4X4 206/214 Hydraulic Flat Cam and Lifter Kit for AMC/Jeep 199-258/4.0L
Edelbrock – RPM Air-Gap AMC 304/360/401 Intake Manifold (Part No.7531)
from
$530.99
Edelbrock part #7531 RPM Air-Gap AMC intake manifold is designed for 1970-91 304-401 c.i.d. V8 applications. The RPM Air-Gap intake manifold incorporate the same race-winning technology as our Victor Series competition intakes. The air-gap design features
Product Features:
See More
Product Features:
- Based on Performer RPM-Series with Unique Air Gap
- Air Gap Cooler and Denser Mixture for More Power
- Designed for 1500 to 6500 RPM Street-Driven Power
- Dual-Plane High-Rise Intake w/180 deg Firing Order
- Produces Incredible Top-End Horsepower
- Retains Good Throttle Response and Acceleration
- Includes Std Oil Fill ; PCV ; A/C Accy Bosses
- Not for Exhaust-Heat Chokes – No Exhaust Crossover
Competition Cams – Xtreme 4X4 210/218 Hydraulic Flat Cam for AMC/Jeep 199-258/4.0L (Part No.68-235-4)
from
$458.99
Xtreme 4X4 210/218 Hydraulic Flat Cam for AMC/Jeep 199-258/4.0L
Competition Cams – Xtreme 4X4 206/214 Hydraulic Flat Cam for AMC/Jeep 199-258/4.0L (Part No.68-231-4)
from
$426.99
Xtreme 4X4 206/214 Hydraulic Flat Cam for AMC/Jeep 199-258/4.0L
Competition Cams – Xtreme 4X4 218/226 Hydraulic Flat Cam for AMC/Jeep 199-258/4.0L (Part No.68-239-4)
from
$426.99
Xtreme 4X4 218/226 Hydraulic Flat Cam for AMC/Jeep 199-258/4.0L
Edelbrock – Water Pump AMC Long Style 1973-Later (Part No.8832)
from
$365.99
Edelbrock #8832 Water Pump AMC long style 1973-later ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “super cooling” Water Pumps
Product Features:
See More
Product Features:
- Standard Impeller Rotation
- 0.625 in. Pilot Shaft
- 0.750 in. Ball/Ball Bearing
- 4.1875 in. Block To Hub Height
- Satin Finish
Competition Cams – Hi-Tech 7.950" Long, .080" Wall, 5/16" Diameter Pushrod Set (Part No.7994-16)
from
$281.99
Hi-Tech 7.950" Long, .080" Wall, 5/16" Diameter Pushrod Set
Edelbrock – Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79 (Part No.5792)
from
$149.99
Product Features:
See More
- Non-Rotator Type
- 1.550 in. Outer Diameter
- .190 Wire Size
- Single Coil Spring Type
- Set of 16
Competition Cams – Engine Valve Spring Kit (Part No.940-16)
from
$111.99
Engine Valve Spring Kit
Competition Cams – 7 Degree Steel Retainer Set of 16 for 3/8" Valve with 1.437"-1.500" Spring (Part No.744-16)
from
$80.99
7 Degree Steel Retainer Set of 16 for 3/8" Valve with 1.437"-1.500" Spring
Competition Cams – Set of 16 Hardened Lash Caps with 3/8" Valve Stem, .190" Head Height (Part No.622-16)
from
$50.99
Set of 16 Hardened Lash Caps with 3/8" Valve Stem, .190" Head Height
Competition Cams – ENGINE ROCKER ARM (Part No.1442-1)
from
$31.99
ENGINE ROCKER ARM
Competition Cams – Flat 1 Piece Guide Plate Set AMC 290-401/Pontiac V8 with 5/16" Pushrod 7/16" Stud (Part No.4851-8)
from
$31.99
Flat 1 Piece Guide Plate Set AMC 290-401/Pontiac V8 with 5/16" Pushrod 7/16" Stud
Competition Cams – Set of 8 Hardened Lash Caps with 3/8" Valve Stem, .190" Head Height (Part No.622-8)
from
$29.99
Set of 8 Hardened Lash Caps with 3/8" Valve Stem, .190" Head Height
Competition Cams – Performance Series EDM Solid Lifter for AMC, Chrysler 273-360, 383-440/426 HEMI (Part No.2901-1)
from
$19.99
Performance Series EDM Solid Lifter for AMC, Chrysler 273-360, 383-440/426 HEMI
Competition Cams – Hi-Tech 7.950" Long, .080" Wall, 5/16" Diameter Pushrod (Part No.7994-1)
from
$16.99
Hi-Tech 7.950" Long, .080" Wall, 5/16" Diameter Pushrod
Competition Cams – Engine Valve Spring (Part No.940-1)
from
$12.99
Engine Valve Spring
Most Sold 1980 Jeep Cherokee Performance Oil Filters
Explore our best-selling Jeep parts for the 1980 Cherokee among 1 OEM and aftermarket options starting from $19.99.
K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-2003)
from
$19.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Product Features:
See More
Product Features:
- Designed to allow high flow rates and a consistent flow of oil to your engine
- Pleated synthetic-blend filtration media removes most harmful contaminants
- Fast and easy Wrench-Off removal using the welded one-inch hex nut
- High capacity to withstand the service intervals recommended by vehicle manufacturers
- Heavy-duty canister for outstanding durability
- Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
- Designed to operate with all synthetic, conventional, and blended motor oils
- 1-Year Limited Warranty
Top-Rated Performance and Racing Products Brands For Your 1980 Jeep Cherokee
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1980 Jeep Cherokees. Below you’ll find some of our best rated Performance and Racing Products from K&N, Competition Cams, and Accel, and more. Performance and Racing Products from these brands that fit a 1980 Cherokee start at just $19.99 and are rated as high as 4.8 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular K&N 1980 Jeep Cherokee Performance and Racing Products
When it comes to maintaining or upgrading your 1980 Jeep Cherokee, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 1980 Jeep Cherokee. With over 1 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $19.99. Plus, with over 9 customer reviews and an average rating of 4.8 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$19.99
(9)
Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine
“5 Star Review”
Popular Competition Cams 1980 Jeep Cherokee Performance and Racing Products
Competition Cams auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1980 Jeep Cherokee owner should feel confident when installing genuine Competition Cams parts in their vehicle. To ensure the best fit and performance for your 1980 Cherokee, Advance Auto Parts carries a full inventory of 1 Competition Cams Performance and Racing Products. Plus you will be keeping your Jeep in peak condition while saving money because prices on these Competition Cams Performance and Racing Products range up to $33.99, plus, with more than 1 customer reviews and an impressive 4.1 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
FAQs for 1980 Jeep Cherokee Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1980 Jeep Cherokees?
Out of 38 Performance and Racing Products that fit 1980 Jeep Cherokees, the following parts are the top sellers:
- Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (6120011) – $19.99
- High Performance Thermostat (22903641) – $32.49
- Motor Mount (22907546) – $46.99
What’s the price range for 1980 Jeep Cherokee Performance and Racing Products?
Performance and Racing Product prices for the 1980 Jeep Cherokee start at $7.99 and go up to $858.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1980 Jeep Cherokee?
The average price for Performance and Racing Products for the 1980 Jeep Cherokee is $230.01. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Jeep Cherokee model years?
What are the cheapest Performance and Racing Products for my 1980 Jeep Cherokee?
The cheapest 1980 Jeep Cherokee Performance and Racing Products we carry in stock are:
- High Energy 7.794" Long, 5/16" Diameter Pushrod (50289688) – $7.99
- Hardened Lash Cap with 3/8" Valve Stem, .190" Head Height (50289460) – $8.99
- Engine Valve Spring (50286866) – $12.99
- Hi-Tech 7.950" Long, .080" Wall, 5/16" Diameter Pushrod (50289739) – $16.99
- Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (6120011) – $19.99
What are the top-rated Performance and Racing Products that fit the 1980 Jeep Cherokee?
Out of 164 reviews by customers, our 1980 Jeep Cherokee Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1980 Jeep Cherokee and their top-rated products:
- Performance Radiators
- Thermocap Radiator Cap (6900022) – $53.99
- Performance Oil Filters
- Thermocap Radiator Cap (6900022) – $53.99
What types of Performance and Racing Products do you sell for my 1980 Jeep Cherokee?
As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 1980 Jeep Cherokee:
Can I get help with 1980 Jeep Cherokee Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Performance and Racing Products and more.
What is your return policy for Jeep Cherokee Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Jeep Cherokee Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
