1980 Honda Prelude Engine Parts
More 1980 Honda Prelude Engine Parts Categories
If you’re looking for an original Engine Parts replacement for a 1980 Honda Prelude, you can search through our selection below. You’ll also find aftermarket and OEM Engine Parts to meet your needs.
Essential 1980 Honda Prelude Engine Parts
Felpro – Oil Pan Gasket Set: PermaDry Molded Rubber, 1 Piece Set (Part No.OS 30469 R)
from
$27.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- STRONG AND DURABLE — Features molded rubber over a rigid carrier for durability, precise alignment and fit
- SUPERIOR SEAL — Proprietary molded rubber design helps to eliminate leak paths, especially in problem corner areas
- EASIER TO INSTALL — One-piece construction is easier to install than multi-piece assemblies and helps reduce potential for installation errors
- INSTALLATION AID — SnapUps aid in holding the gasket in place for easy installation and allow for quick bolt tightening
- PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding
- PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding
Felpro – OIL PAN GASKET SET (Part No.OS 30419 R)
from
$14.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
- SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
Dorman – Rubber Freeze Plug – Size Range: 1-1/8" – 1-1/4" – Metric Range: 28mm – 31mm – Nominal Size: 1-1/8" (Part No.02610)
from
$5.99
Rubber Freeze Plug – Size Range: 1-1/8" – 1-1/4" – Metric Range: 28mm – 31mm – Nominal Size: 1-1/8"
Melling – Stock Replacement OE Type Oil Pump and Screen (Part No.M-96F)
from
$326.99
Melling oil pumps provide dependable performance every time in every application. Every Melling oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling oil pumps use the latest in gear and gerotor
Product Features:
See More
Product Features:
- Manufactured from high quality materials for consistent durable wear
- Precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
- Meets or exceeds original equipment specifications
Melling – Stock Replacement OE Type Oil Pump (Part No.M232)
from
$172.99
Melling oil pumps provide dependable performance every time in every application. Every Melling oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling oil pumps use the latest in gear and gerotor
Product Features:
See More
Product Features:
- Manufactured from high quality materials for consistent durable wear
- Precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
- Melling oil pumps are tested for pressure and flow under operating conditions to ensure quality
Melling – Stock Replacement OE Type Oil Pump and Screen (Part No.M-96C)
from
$59.99
Melling oil pumps provide dependable performance every time in every application. Every Melling oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling oil pumps use the latest in gear and gerotor
Product Features:
See More
Product Features:
- Manufactured from high quality materials for consistent durable wear
- Precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
- Meets or exceeds original equipment specifications
Crankshaft Rebuilders – Remanufactured Crankshaft Kit (Part No.31530)
from
$277.99
Remanufactured precision machined OE crankshafts.
Product Features:
See More
Product Features:
- Includes matching rod and main bearings.
- Journals Micropolished.
- All units subject to complete quality inspection.
Crankshaft Rebuilders – Remanufactured Crankshaft Kit (Part No.31580)
from
$331.99
Remanufactured precision machined OE crankshafts.
Product Features:
See More
Product Features:
- Includes matching rod and main bearings.
- Journals Micropolished.
- All units subject to complete quality inspection.
Crankshaft Rebuilders – Remanufactured Crankshaft Kit (Part No.28430)
from
$218.99
Remanufactured precision machined OE crankshafts.
Product Features:
See More
Product Features:
- Includes matching rod and main bearings.
- Journals Micropolished.
- All units subject to complete quality inspection.
National – Multi Purpose Seal (Part No.712009)
from
$6.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Ishino – Stone Distributor O-Ring (Part No.F210140292ISH)
from
$4.26
The Ishino Stone Distributor O-Ring is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Driveworks – Oil Seal (Part No.S-712009)
Imperial – Econo-Kool® Engine Oil Cooler (Part No.240459)
from
$141.99
Product Features:
See More
- Imperial Econo-Kool« engine oil cooler kit
- Size: 3/4″ x 7-1/2″ x 12-1/2″
- Light-duty applications
- All except Chevrolet V8 applications
- Size: 3/4 in. x 7-1/2 in. x 12-1/2 in.
- Light duty applications
- All except Chevrolet V8 applications
- Lightweight construction with high-efficiency turbulators
Imperial – Engine Oil Cooler (Part No.241040)
from
$216.99
Product Features:
See More
- Imperial Swirl-Cool« engine oil cooler kit
- Size: 1-1/2″ x 6-1/2″ x 18″
- Heavy-duty applications
- All except Chevrolet V8 applications
- Universal Cooler, NOT a direct OE replacement. User to determine fitment prior to installation
- Heavy duty applications
- All except Chevrolet V8 applications
Imperial – Ultra-Cool Engine Oil Cooler Kit (Part No.240457)
from
$167.99
Product Features:
See More
- Size: 3/4 in. x 10 in. x 12-1/4 in.
- Medium duty applications
- All except Chevrolet V8 applications
- Two-pass design for increased cooling
Anchor – Engine Mount: Left, 1 Piece (Part No.9085)
from
$50.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to HONDA 92-96;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1992-1996
- Weight approx: 4 Lbs
Corteco – Transmission Mount (Part No.J6000128453CFW)
from
$64.06
Transmission Mount
Anchor – Engine Mount: Rear Right, Front, Rear, 1 Piece (Part No.8014)
from
$18.29
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to HONDA 79-89;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1979-1989
- Weight approx: 2 Lbs
Carquest Premium – Oil Filler Cap (Part No.10106)
from
$7.79
Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
Product Features:
See More
Product Features:
- Provides proper seal to ensure leak prevention
- Stops engine blow by
- High quality construction
- Meets all OEM specifications
Carquest Premium – Engine Oil Filler Cap: 10081, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10081)
from
$9.99
Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
Product Features:
See More
Product Features:
- Provides proper seal to ensure leak prevention
- Stops engine blow by
- High quality construction
- Meets all OEM specifications
National – Multi Purpose Seal (Part No.712008)
from
$7.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Felpro – Engine Camshaft Seal Kit (Part No.TCS 45987)
from
$15.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
National – Multi Purpose Seal (Part No.222743)
from
$22.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Felpro – Engine Camshaft Seal (Part No.TCS 45898)
from
$8.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Popular 1980 Honda Prelude Engine Parts Categories
1980 Honda Prelude Engine Parts
You count on your 1980 Honda Prelude to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Engine Parts. With 14 Engine Parts ranging in price from $4.26 to $326.99, you’re sure to find everything you need for your 1980 Honda Prelude.
Brands matter. If you want to shop a specific Engine Parts brand, we stock 12 different brands like Imperial, Beck/Arnley, and Anchor. 1980 Honda Prelude Engine Parts start as low as $4.26!
One of the best ways to find top quality OEM or aftermarket Engine Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 4 extensive product reviews on 1980 Honda Prelude Engine Parts.
Did we mention you can order your Engine Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Engine Parts inventory for your 1980 Honda Prelude below to get started!
Top-Rated Engine Parts Brands For Your 1980 Honda Prelude
Trusted Engine Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1980 Honda Prelude running right for years to come. In our inventory you’ll find brands like Imperial, Beck/Arnley, Anchor, and even more.
Popular Imperial Engine Parts
You’ll find popular Imperial brand products across Oil Cooler Parts. All are waiting to get your 1980 Honda Prelude back on the road. Some of the top-rated Imperial products in these categories are:
FAQs for 1980 Honda Prelude Engine Parts
What are the most purchased Engine Parts for the 1980 Honda Prelude?
Out of 14 Engine Parts for the 1980 Honda Prelude, the most popular in our inventory are:
