1980 GMC K2500 Truck Beds

Essential 1980 GMC K2500 Truck Beds

KAI – Floor Support (Part No.LKQ1057745)

Floor Support

from

$68.99
New Standard Replacement Bed Floor Support

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Pick Up Bed Crossmember Kit (Part No.926-982)

Pick Up Bed Crossmember Kit

from

$466.99
When a truck bed crossmember rusts, the only option has been to replace the entire bed. This kit allows replacement of only the failed floor supports to reduce repair costs.

Product Features:
  • Saves money – this truck bed floor support repair kit allows you to replace only damaged crossmembers, not the entire bed.
  • Complete repair – includes 4 bed crossmembers painted in weldable primer and mounting hardware.
  • Application specific – made to match the dimensions and material for certain Chevrolet and GMC pick-up trucks
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

KAI – Truck Bed Panel (Part No.RRP415)

Truck Bed Panel

from

$81.99
New Standard Replacement Driver Side Rear Lower Bed Section, 6.5 Foot Bed, 30 X 17 3/4

Product Features:
  • 6.5 Foot Bed, 30 X 17 3/4, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Truck Bed Panel (Part No.GMK4145630812)

Truck Bed Panel

from

$238.99
New Goodmark Front Pickup Box Panel, Fleetside, Can Use For 73-80

Product Features:
  • Fleetside Can Use For 73-80
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Lund – Genesis Roll Up Tonneau (Part No.96001)

Genesis Roll Up Tonneau

from

$444.99
Cover rolls up in seconds to allow complete access. High quality, tear-resistant fabric. Dual automatic latches make it the most secure cover. Easy adjustment latches provide tight fit. Pre-assembled kits and easy to use clamps. Assured no drill installation in under 20 minutes. Includes adapter kit for use on cargo management systems. Black, leather look.

Product Features:
  • Cover Rolls Up In Seconds To Allow Complete Access
  • High Quality; Tear-Resistant Fabric
  • Dual Automatic Latches Make It The Most Secure Cover
  • Easy Adjustment Latches Provide Tight Fit
  • Pre-Assembled Kits and Easy To Use Clamps
  • Assure A No Drill Installation In Under 20 Minutes
  • Includes Adapter Kit For Use On Cargo Management Systems
See More

Tonno Pro – LoRoll Rollup Tonneau Cover (Part No.LR-1010)

LoRoll Rollup Tonneau Cover

from

$351.99
The Tonno Pro Lo Roll Vinyl Tonneau Cover is one of the most versatile covers on the market. After easy installation, you can get full access to your truck bed AND have the security and protection from the elements. Our Lo Roll tonneau truck cover is mounted inside the bed rails offering access for mounting any of your other favorite accessories – like ladder racks, side rails, tie downs, bike racks – whatever you need to truly enjoy your truck. Snap installation will have you up and running with your Tonno Pro tonneau cover in minutes. There’s no drilling involved and the only tool you’ll need is a 17 mm socket and ratchet. The quality of the Tonno Pro Lo Roll is unmatched. From the tear-resistant double sided vinyl to the 6063 grade powder coated aluminum components, the Tonno Pro Lo Roll provides you the security and functionality you need from a pickup tonneau cover – with our Low Profile Styling that will look great on any truck.

Product Features:
  • Dual Coated Vinyl
  • Won’t Rot Or Mildew
  • Water Tite Seals/Carwash Friendly
  • Hook And Loop Fastening
  • Theft Deterrent
  • No Access with Tailgate Lock
  • Low Profile Design/Mounts Inside The Bed Rails
See More

Rampage – EasyFit Cab Cover, 4 Layer, Gray, Includes Lock, Cable, Storage Bag, For Use With Standard Cab (Part No.1320)

EasyFit Cab Cover, 4 Layer, Gray, Includes Lock, Cable, Storage Bag, For Use With Standard Cab

from

$133.99
Product Features:
  • Soft And Durable Diamond Bond Pattern
  • Unique 4-Layer Breathable Material
  • Ultraviolet Protection Against Sun And Heat
  • Polypropylene Layers Repel Water
  • Side Grommets For Tie Downs
  • Includes Free Locking Cable And Storage Bag
  • Indoor And Outdoor Usage
See More

Covercraft – Truck Cab Cooler – Tan Flannel, Tan (Part No.CP14634TF)

Truck Cab Cooler - Tan Flannel, Tan

from

$321.99
Truck Cab Cooler protects the cockpit area from UV rays and helps reduce heat build-up inside the vehicle. Easy to install, Cab Coolers use hook and loop fasteners under the mirrors and door handles (varies by model). Some patterns include adjustable webbing straps to wheel wells to securely hold the cover in place. Custom patterned for trucks and SUV’s.

Product Features:
  • Protects Cab Area From UV & Heat Build-up
  • Also Good For Snow & Ice Protection
  • Easy to Install
  • Stow Behind Seat
See More

Dee Zee – DogBx (Part No.DZ91782)

DogBx

from

$309.99
DogBx

KAI – Truck Floor Support (Part No.RRP1170)

Truck Floor Support

from

$40.99
New Standard Replacement Front Cab Floor Support, 13 X 4 1/4

Product Features:
  • 13 X 4 1/4, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Truck Floor Support (Part No.RRP117)

Truck Floor Support

from

$13.99
New Standard Replacement Front Cab Floor Support, Slip-On Style, 13 X 4

Product Features:
  • Slip-On Style, 13 X 4, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Bed Panel Patch (Part No.GMK4144610731L)

Bed Panel Patch

from

$90.99
New Goodmark Driver Side Lower Front Bedside Patch, For Shortbed Fleetside Models

Product Features:
  • For Shortbed Fleetside Models
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Bed Panel Patch (Part No.GMK4144610731R)

Bed Panel Patch

from

$79.99
New Goodmark Passenger Side Lower Front Bedside Patch, For Shortbed Fleetside Models

Product Features:
  • For Shortbed Fleetside Models
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Truck Cab Mount (Part No.RRP2753)

Truck Cab Mount

from

$101.99
New Standard Replacement Driver Or Passenger Side Rear Cab Body Mount, 1/2 Ton 4WD, All 3/4 Ton And 1 Ton Models, Use 2 Per Truck

Product Features:
  • 1/2 Ton 4WD All 3/4 Ton And 1 Ton Models Use 2 Per Truck
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Truck Bed Floor (Part No.GMK4144731731)

Truck Bed Floor

from

$85.99
New Goodmark Pickup Bed Patch Piece, Fleetside, Bed Floor Patch, 49 Inches Long X 24 Inches Wide

Product Features:
  • Fleetside Bed Floor Patch 49 Inches Long X 24 Inches Wide
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Truck Bed Floor (Part No.LKQ1050767)

Truck Bed Floor

from

$72.99
New Standard Replacement Driver Or Passenger Side Bed Floor Support, 71.63 X 4.5 X 3.13 Inches

Product Features:
  • 71.63 X 4.5 X 3.13 Inches, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Truck Cab Support (Part No.GMK414451773R)

Truck Cab Support

from

$121.99
New Goodmark Passenger Side Cab Floor Brace

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Truck Cab Support (Part No.GMK414451773L)

Truck Cab Support

from

$121.99
New Goodmark Driver Side Cab Floor Brace

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dee Zee – Mesh, Textured, Black, Aluminum, Used With Cross Bed Tool Box, Curved Design (Part No.DZ95050RTB)

Mesh, Textured, Black, Aluminum, Used With Cross Bed Tool Box, Curved Design

from

$968.99
Even if you secure your cargo properly, it can still happen. Driving on todays hectic roads can lead to extreme stopping situations that could end up sending cargo barreling through your truck cab rear window. With the Dee Zee Cab Rack this is no longer a concern. Made of 100 Percent 2.5 Inch aluminum tubing with a protective textured black powder coating, our cab racks are built to handle as much abuse as you can throw at them. A rear window protection screen consists of either heavy duty ultra-mesh – for your protection and visibility requirements.

Product Features:
  • Rugged Protection For Your Trucks Rear Cab Area
  • 2.5 Inch Hexagonal Aluminum Tubing For Rugged Construction
  • Heavy-Duty Aluminum Ultra Mesh Offers More Visibility And Protection Depending On Your Needs
  • Protective Textured Black Powder Coat Finish Keeps Your Rack Looking Fresh
  • Integrated Channel System For Easy Addition Of Accessories
  • Install Into Existing Stake Pocket Holes
See More

Westin – HD Headache Rack (Part No.57-8025)

HD Headache Rack

from

$545.99
HDX Commercial Grade Headache Rack protects your rear window from potential damage from shifting cargo. Welded tie-off hooks for securing your load are standard on all applications. Angled louvers keep sunlight out the cab cool and prevent UV damage to your interior all while allowing unobstructed visibility. 4 mount tabs give you the option of adding safety lights or accessories. Accommodates all major brand tool boxes. 2 diameter round top tube makes it easy to slide ladders

Product Features:
  • Provides The Protection Heavy Trucks Require
  • 1 Piece Welded Construction
  • Full Louvered Window Protection
  • Includes Rope Tie Off Hooks
  • Has Opening For Rear Light
  • Contoured Body Frame
  • Mounts For Light Tabs
See More

TrailFX – Round Tube Louver, With Rear Cab Window Cut Out, Powder Coated, Black, Steel (Part No.H0003B)

Round Tube Louver, With Rear Cab Window Cut Out, Powder Coated, Black, Steel

from

$385.99
When it comes to your truck or SUV, you want quality, style, protection, and durability at a price you can afford. TrailFX offers you an array of products, whether it is for work or play, TrailFX has something for everyone needs. Step bars to grille guards, tool boxes to bed protection, whatever your need, we have you covered. TrailFX sources high quality products for trucks, SUVs, and cars at a price you can afford. Whether you need a nerf step for your SUV, a tool box for your truck, or a bug shield for your car, we want to make sure that you are supplied the quality, style, and durability you expect from a product.

Product Features:
  • Round Tube Louvered Design With Space For The Cab Sliding Rear Window
  • Exclusive Design
  • Protects The Cab From Cargo That May Shift In The Truck Bed
  • Protective Bars Also Function As Convenient Tie Down Point To Brace Or Secure Heavy Cargo
See More

KAI – Truck Cab Corner (Part No.RRP1299)

Truck Cab Corner

from

$135.99
New Standard Replacement Driver Side Cab Corner Inner, 2 Door Extended Super Cab, 41 X 9 1/2 X 3 1/2

Product Features:
  • 2 Door Extended Super Cab, 41 X 9 1/2 X 3 1/2, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Truck Cab Corner (Part No.RRP128)

Truck Cab Corner

from

$16.99
New Standard Replacement Passenger Side Cab Corner, 21 X 7 X 1

Product Features:
  • 21 X 7 X 1, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Truck Cab Corner (Part No.GMK4144485732R)

Truck Cab Corner

from

$31.99
New Goodmark Passenger Side Outer Cab Corner, 18.9 Inches High X 13.9 Inches Wide X 4.3 Inches Deep

Product Features:
  • 18.9 Inches High X 13.9 Inches Wide X 4.3 Inches Deep
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

CARR – Truck Step, Cab Mount; Multi-Fit; Set Of 2; Flat Step; Non-Extendable; Polished Aluminum (Part No.124032)

Truck Step, Cab Mount; Multi-Fit; Set Of 2; Flat Step; Non-Extendable; Polished Aluminum

from

$268.99
The stylish and innovative design of these steps add to a vehicle rugged off road look. Available in three low maintenance, extremely durable finishes to complement your vehicle appearance. Easily installed using our new multi mount system for superior strength and rigidity. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:
  • Exclusive New Multi Mount System
  • Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
  • Rugged Diamond Tread Pattern Provides For Safe And Attractive Non Slip Surface
  • Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Todays Vehicles
  • Strong Construction To Hold Up Under Extreme Conditions
  • Mechanical Polished Finish That would not Rust, Crack Or Peel And Requires Very Little Maintenance
  • Strongest And Easy Installation
  • Limited Lifetime Warranty
See More

CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Stationary, Aluminum (Part No.114031)

Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Stationary, Aluminum

from

$279.99
LD step will give the user easier access to the vehicle due to the wider and deeper stepping surface which extends further than our other steps. The LD step is available in our three durable finishes, and installation is a cinch with our mounting system.

Product Features:
  • Easier Entry And Exit From Your Vehicle
  • Wide Functional Step Area
  • Extends Further Than Our Current Steps
  • Made Of Corrosion Resistant, Durable Cast Aluminum Alloy For Extreme Longevity
  • New Aggressive And Appealing Tread Design For A Non-Slip Surface
  • Unique Design That Enhances The Looks Of Current Vehicle Body Styles
  • Resists Scratches, Peeling And Fading
  • Rocker Panel Installation Provides For The Strongest And Easiest Installation Of Any Step Products
See More

CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Polished, Aluminum (Part No.103992)

Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Polished, Aluminum

from

$141.99
Uniquely designed diamond tread pattern provides a safe non slip surface on the flat step area. Our exclusive multi mount system is designed for precision fit and easier installation. Constructed of an extremely strong die cast aluminum alloy for the ultimate in quality and durability. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:
  • Exclusive New Multi Mount System
  • Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
  • Rugged Diamond Tread Pattern Provides For Safe And Attractive Non Slip Surface
  • Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Today Vehicles
  • Strong Construction To Hold Up Under Extreme Conditions
  • Mechanical Polished Finish That Will Not Rust, Crack Or Peel And Requires Very Little Maintenance
  • Strongest And Easy Installation
See More

CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Textured, Matte Black, Aluminum (Part No.103991)

Cab Mount, Multi-Fit, Set Of 2, Flat Step, Textured, Matte Black, Aluminum

from

$142.99
Uniquely designed diamond tread pattern provides a safe non slip surface on the flat step area. Our exclusive multi mount system is designed for precision fit and easier installation. Constructed of an extremely strong die cast aluminum alloy for the ultimate in quality and durability. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:
  • Exclusive New Multi Mount System
  • Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
  • Rugged Diamond Tread Pattern Provides For Safe And Attractive Non Slip Surface
  • Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Today Vehicles
  • Strong Construction To Hold Up Under Extreme Conditions
  • Black Powder Coat Finish Features A Lightly Textured Matte Finish That Resists Scratching, Peeling And Fading
  • Strongest And Easy Installation
See More

1980 GMC K2500 Truck Beds

Maybe you’re in the middle of a full rebuild of that 1980 GMC K2500. Maybe you just need a couple of Truck Beds. Either way, Advance Auto Parts has 32 different Truck Beds in our inventory ranging from $8.99 to $968.99. That means you can find the exact parts or products you need to keep that 1980 GMC K2500 running smoothly.

Truck Beds are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 1980 GMC K2500. KAI, CARR, and Rampage are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Truck Beds for your 1980 GMC K2500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Truck Beds to keep your 1980 GMC K2500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Truck Beds Brands To Make Your 1980 GMC K2500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1980 GMC K2500 demands trusted brand parts and products to keep it running. Many trusted brands of Truck Beds make up Advance Auto Parts’ inventory, and all are ready to help make your K2500 the best it can be. Be sure to browse some of our top Truck Beds brands and parts.

FAQs for 1980 GMC K2500 Truck Beds

What are the most purchased Truck Beds for the 1980 GMC K2500?

Out of 32 Truck Beds for the 1980 GMC K2500, the most popular in our inventory are:
Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Stationary, Aluminum
from $268.99
This product is not rated
Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Stationary, Aluminum
Truck Cap Side Steps
Truck Step, Cab Mount; Multi-Fit; Set Of 2; Flat Step; Non-Extendable; Polished Aluminum
from $268.99
This product is not rated
Truck Step, Cab Mount; Multi-Fit; Set Of 2; Flat Step; Non-Extendable; Polished Aluminum
Truck Cap Side Steps
Truck Floor Support
from $99.99
This product is not rated
Truck Floor Support
Truck Bed Floor Supports