from

$11.49

This power brake filter is designed to match the fit and function of the original filter on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this power brake filter is designed to match the fit and function of the original filter on specified vehicles
Restores functionality – reliable replacement for an original part that has failed due to clogging
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$79.99

Carquest Wearever Hub And Rotors are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design And non-directional finish that eliminates noise And enhances pedal feel. Carquest Wearever Hub And Rotors are designed to dissipate heat helping to eliminate brake fade And increase the life of your pads. Ready to install out of the box to save you time.

Product Features:

Meets or exceeds OE design for superior stopping power
Exceeds ISO manufacturing guidelines (International Organization for Standardization)
Matches OE vane size for proper cooling
Optimal metallurgy and casting thickness to prevent warping
Air gap eliminates brake fade and increases pad life
Non-Directional finish decreases break-in time

from

$109.99

CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:

100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
Exclusive rust-prohibitive finishing process extends unit life.
Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
All units are 100% tested to ensure reliable performance.
Guaranteed fit and function.

from

$15.99

CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:

Each unit is 100% new, providing consistent performance when servicing your brake system
Easy to transfer for on-the-spot master cylinder bleeding
Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
Easy to clean to ensure no cross contamination
Durability for long lasting performance

from

$4.29

Fitting Position Front Axle, Fitting Position Left & Right.

Product Features:

This product is covered by a full OE Quality Warranty
This part matches Original Equipment (OE) quality specifications which means that it is at least as good if not better than the original part the manufacturer supplied with the car
Insures longer brake life and performance
Helps deliver a quieter braking system
Insures longer brake life and performance

from

$16.99

This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:

Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
Quality assured – materials tested to exacting government-regulated safety and durability standards
Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
Brand may vary by location

from

$8.29

Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.

Product Features:

This part matches Original Equipment (OE) quality specifications
Increases the life span of the brake pads
Restores brakes to like-new performance
Prevents noise and premature wear
Direct replacement for a proper fit

from

$84.76

For replacement brake pads that are designed for your vehicle, trust the name that manufacturers trust Akebono Pro-ACT® Ultra-Premium brake pads. Manufactured from carefully selected materials designed to help minimize and/or virtually eliminate unwanted brake dust, Pro-ACT Ultra-Premium brake pads provide consistent, smooth stopping power across a wide range of driving conditions, including panic stops. Replacement Brake Pads from the Creators of Akebono Ceramic Technology® Engineered to eliminate noise, vibration, and harshness, Pro-ACT Ceramic Disc Brake Pads provide the ultimate braking experience. The best replacement for restoring OE ceramic pad performance, Pro-ACT Ceramic Disc Pads are also ideal for upgrading from conventional pads. In addition to dramatically quieter braking, Pro-ACT Ceramic Pads provide best-in-class braking performance, including enhanced initial effectiveness (no break-in required), high resistance to fade, consistent brake pedal feel, and ultra-low dusting for cleaner wheels and tires. Akebono’s ceramic technology also causes minimal wear on brake rotors.

Product Features:

Virtually eliminates noise, vibration, and harshness (NVH)
Vehicle-optimized ceramic formulas for superior performance
Unrivaled stopping power
Clean wheels
No break-in required
Rotor-friendly with proven longer rotor life
Perfect upgrade for all braking systems
Made in the USA

from

$7.49

The components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – the components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles
Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$29.99

Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:

Dependable stopping power
Single layer shim for quiet braking
OE-designed slots and chamfers to reduce noise and vibration
Powder-coated backing plate prevents corrosion

from

$9.29

Hardware consists of a variety of parts designed to assist in restoring your brake system such as, Anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Change your hardware with the brake shoes to ensure maximum performance. Industry experts agree – When brake friction materials are ready to be replaced, the hardware should also be replaced.

Product Features:

This part matches Original Equipment (OE) quality specifications
Contains all the necessary hardware for easy installation
Manufactured to restrain high tolerances with quality materials
Helps deliver a quieter, more efficient braking system
Restores brakes to like-new performance

from

$5.49

This spindle lock nut kit includes a new spindle nut and the necessary hardware designed to match the factory equipment.

Product Features:

Direct replacement – this spindle lock nut kit includes a nut and related, necessary hardware for servicing specific vehicles
Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to wear
Durable construction – kit components are manufactured to precise specifications to ensure proper fit and reliable service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$15.29

This parking brake strut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this parking brake strut blade is designed to match the fit and function of the original part on specified vehicles
Ideal solution – this strut is a reliable replacement for an original part that is missing or damaged
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$14.99

This brake master cylinder cap is designed to match the fit and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this brake master cylinder cap is designed to match the fit and function of the original cap on specified vehicles
Restores functionality – reliable replacement for an original part that is missing or failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$5.99

The brake hardware should be inspected and replaced regularly to ensure reliable, efficient performance. The hold down springs are designed to secure the brake shoes to the backing plate while allowing proper brake shoe movement.

Product Features:

This part matches Original Equipment (OE) quality specifications
Manufactured with quality materials to suppress high stress levels
Maintains safe movement and effective stopping performance

from

$2.99

Hardware consists of a variety of parts designed to assist in restoring your brake system to Like New Performance. Caliper anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too.

Product Features:

This part matches Original Equipment (OE) quality specifications
Exact fitment and original replacement
New Brake Hardware prevents noise and premature wear
Helps deliver a quieter, more efficient braking system

from

$371.99

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Our Z36 Truck & Tow Brake Drum Upgrade Kit is recommended for trucks, 4x4s, and SUVs that not only work hard, but play hard as well. This brake pad, rotor and drum kit comes with everything you need, including all the necessary hardware, for an easy, bolt-on installation. The low-dust Ceramic brake pads are reinforced with Carbon-Fiber to provide severe-duty stopping power without sacrificing everyday drivability. These pads are paired with Drilled & Slotted rotors that keep brake temperatures down by maximizing heat dissipation, critical for those long mountain descents. The Evolution premium coated brake drums come with brake shoes, a spring/hold-down kit and adjusters. Whether towing a boat or trailer, hauling for the jobsite, or tackling a tough off-road trail, get the easy and affordable, bolt-on performance upgrade with the Z36 Truck & Tow Brake Drum Upgrade Kit.

Product Features:

This complete front and rear kit includes front drilled & slotted rotors with Z36 brake pads along with silver painted rear drums with brake shoes and hold down hardware.
Proprietary Carbon-Fiber Ceramic Z36 brake pads enhance the strength of a typical ceramic brake pad compound to handle heavier loads
Drilled & Slotted performance rotors provide maximum cooling
Premium drums are coated in a silver rust preventative paint that is oven cured so it keeps looking good despite high temperatures
Premium shoes are made from 100% new steel, plus are cam ground and chamfered to ensure precise fit and noise-free operation
Comes with everything you need to get the job done, including stainless-steel pad installation hardware, shoe installation hardware, adjuster kits and high-temperature ceramic brake lubricant
Brand new shoe hold-down hardware ensures that you don’t have to deal with the old worn out/broken springs, pins or cups.
Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
Buy with confidence from the originator & industry leader of brake kits

from

$436.99

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Our Z36 Truck & Tow Brake Upgrade Kit with Powder Coated Calipers is recommended for trucks, 4x4s, and SUVs that not only work hard, but play hard as well. This brake pad, rotor and caliper kit comes with everything you need, including premium stainless-steel hardware, for an easy, bolt-on installation. The low-dust Ceramic brake pads are reinforced with Carbon-Fiber to provide severe-duty stopping power without sacrificing everyday drivability. These pads are paired with Drilled & Slotted rotors that keep brake temperatures down by maximizing heat dissipation, critical for those long mountain descents. The Powder Coated Calipers not only protect against corrosion, but also really stand out behind your wheels! Whether towing a boat or trailer, hauling for the jobsite, or tackling a tough off-road trail, get the easy and affordable, bolt-on performance upgrade with the Z36 Truck & Tow Brake Upgrade Kit with Powder Coated Calipers.

Product Features:

This complete brake kit has been engineered to handle the added stress of towing, hauling, mountainous driving and lifted trucks
Proprietary Carbon-Fiber Ceramic Z36 brake pads enhance the strength of a typical ceramic brake pad compound to handle heavier loads
All calipers are powder coated, assembled, and tested in our Chicago, IL facility
Stainless-steel pad shims resist the increased temperatures common on heavy duty applications
Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
Drilled & Slotted performance rotors provide maximum cooling
Bolt-on upgrade for stock brakes, no modifications necessary
Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
Buy with confidence from the originator & industry leader of brake kits

from

$2.99

Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this tool, you can be sure the brake adjustments are occurring at the proper intervals.

Product Features:

Increases the Life Span and Improves the Performance of the Drum Brakes
Eliminates heat and corrosion deterioration
Restores brakes to like-new performance

from

$19.99

Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this kit, you can be sure the brake adjustments are occurring at the proper intervals to prevent negative comebacks.

Product Features:

This part matches Original Equipment (OE) quality specifications
Increases the Life Span and Improves the Performance of the Drum Brakes
Manufactured with quality materials to suppress high stress levels
Corrosion resistant coating for long-lasting durability against harsh roads

from

$56.99

Carquest Premium brake drums meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium drums are manufactured with proper harmonic design and balancing to help eliminate noise and vibration. Our drums are manufactured to the original dimensional specifications for proper fit and performance. Carquest Premium brake drums are designed for long-lasting and quiet braking with superior performance.

Product Features:

Meets or exceeds OE design for superior stopping power
Exceeds ISO manufacturing guidelines (International Organization for Standardization)
Proper harmonic design and balance helps to reduce brake noise and vibration
Optimal metallurgy and casting thickness to preventing warping

from

$2.99

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks.

Product Features:

This part matches Original Equipment (OE) quality specifications
Eliminates heat and corrosion deterioration
Helps deliver a quieter, more efficient braking system

from

$19.54

ACDelco Professional DuraStop Brake Wheel Cylinders use both aluminum and iron castings making them the ideal high quality aftermarket replacement for many vehicles on the road today. The ACDelco DuraStop wheel cylinders contain both Ethylene Propylene (EPDM) and Styrene Butadiene (SBR) rubber components to provide superior resistance to heat, corrosion, and leakage. Formulated with a smooth bore finish, these cylinders have a quality seal to help increase the life of rubber components. ACDelco Professional Drum Brake Wheel Cylinders are ready to bench bleed and install right out of the box – no assembly required. These premium aftermarket replacement Drum Brake Wheel Cylinders are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Meets the brake performance requirements of SAE J1153 and J1154 testing, providing reliability and quality
Pressure tested to ensure safe and confident braking
Trivalent coated bleeder screws provide extra protection and added durability
Cast iron and aluminum specifications; no extra stress on the brake boosting mounting

from

$8.29

Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this tool, you can be sure the brake adjustments are occurring at the proper intervals.

Product Features:

This part matches Original Equipment (OE) quality specifications
Corrosion resistant coating for long-lasting durability against harsh roads
Manufactured to restrain high tolerances with quality materials
Direct replacement for a proper fit
Helps deliver a quieter, more efficient braking system

from

$3.79

The brake hardware should be inspected and replaced regularly to ensure reliable, efficient performance. The hold down spring top cups are designed to provide direct and simple replacement.

Product Features:

This part matches Original Equipment (OE) quality specifications
Fast and efficient replacement
Eliminates heat and corrosion deterioration

from

$39.49

Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:

Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
Plastic reservoirs are vacuum-tested to ensure they are leak free.

from

$53.16

ACDelco Professional Reman Friction Ready Disc Brake Calipers use both aluminum and iron castings, making them the ideal high quality aftermarket replacement. These unloaded calipers contain Ethylene Propylene (EPDM) rubber components to provide superior resistance to heat, corrosion, and leakage. Remanufacturing disc brake calipers is an automotive industry practice that involves disassembly of existing units, and replacing components that are most prone to wear and failure with new components. Damaged and obsolete parts are replaced and are 100% end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing also benefits the environment by returning components back into service rather than processing as scrap or simply disposing of them. ACDelco Professional Reman Friction Ready Disc Brake Calipers are developed without attached brake pads, allowing customization for the application at hand. Bleeder screws, copper sealing washers, hardware, and mounting brackets are all included for easy installation. These premium aftermarket replacement reman friction ready disc brake calipers are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Pressure tested to ensure safe and confident braking
Cast iron and aluminum specifications; no extra stress on the brake boosting mounting
Developed without attached brake pads for customization

from

$2.29

This brake hydraulic hose caliper bolt washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this brake hydraulic hose caliper bolt washer matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience