1980 GMC C2500 Drive Shafts and Axles

More 1980 GMC C2500 Drive Shafts and Axles

Find your specific 1980 GMC C2500 original or aftermarket Drive Shafts and Axles below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1980 GMC C2500 Drive Shafts and Axles

Yukon Gear – GM 9.5" Rear Axle Bearing And Seal Kit (Part No.10003)

GM 9.5" Rear Axle Bearing And Seal Kit

from

$109.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1561TV axle bearing and seal kit for semi-floating GM 9.5″, TorringtonBrand, 2.985″ OD, 1.700″ ID. This axle bearing & seal kit services one side only.

Product Features:
  • Fits GM applications
  • Includes axle bearing and seal
  • Services one side
  • 2.985″ O.D.
  • 1.700″ I.D.
See More
View Product

FAG US – HANGER BEARING (Part No.CH0156)

HANGER BEARING

from

$148.99
HANGER BEARING
View Product

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More
View Product

Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.976-074)

Rear Drive Shaft: Greaseable, Adjustable

from

$1132.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More
View Product

Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.976-218)

Rear Drive Shaft: Greaseable, Adjustable

from

$1055.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More
View Product

National – Bearings (Part No.1308-L)

Bearings

from

$110.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More
View Product

National – Bearings (Part No.HM88649)

Bearings

from

$21.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

(1 reviews)
View Product

Yukon Gear – AxleHubBolt (Part No.33583)

AxleHubBolt

from

$5.99
AxleHubBolt
View Product

National – Multi Purpose Bearing (Part No.HB-108-D)

Multi Purpose Bearing

from

$110.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

(4 reviews)
View Product

National – Multi Purpose Bearing (Part No.HB-88107-A)

Multi Purpose Bearing

from

$44.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

(25 reviews)
View Product

Yukon Gear – 9.5" GM C/Clip (Part No.33081)

9.5" GM C/Clip

from

$10.99
9.5″ GM C/clip.

Product Features:
  • c-clip for GM 9.5″
See More
View Product

Yukon Gear – C/Clip (Part No.33083)

C/Clip

from

$8.99
C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.

Product Features:
  • c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
  • .150″ thick
See More
View Product

Dorman – Help – Axle Shaft Lock Assortment (Part No.81050)

Axle Shaft Lock Assortment

from

$6.49
This drive axle shaft lock C-clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

(3 reviews)
View Product

Yukon Gear – Adapter Sleeve Fro GM 11.5" & 10.5" 14 Bolt Truck Yokes To Use Triple Lip Pinion Seal (Part No.41209)

Adapter Sleeve Fro GM 11.5" & 10.5" 14 Bolt Truck Yokes To Use Triple Lip Pinion Seal

from

$29.99
Product Features:
  • Adapter sleeve
  • Fits GM 10.5″ 14 bolt truck and GM 11.5″
  • Converts to triple lip seal
See More
View Product

Yukon Gear – Pinion Yoke For ’10 & Up GM 14 Bolt Truck, Express Van Only (Part No.41204)

Pinion Yoke For '10 & Up GM 14 Bolt Truck, Express Van Only

from

$294.99
Yukon pinion yoke for ’10 & up GM 14 bolt truck, Express van only.

Product Features:
  • Fits GM 10.5″ 14 bolt truck in Express van
  • 30 spline
  • 1485 U-Joint size
See More
View Product

Driveworks – Universal Joint (Part No.DW-331BL)

Universal Joint

from

$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:
  • The cross is hot forged for the higher torque and horsepower
  • The bearing cups are made by cold forging, having higher strength and better rigidity
  • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
  • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
  • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
  • Snap rings are held to strict tolerances to ensure proper cup position and retention
  • Nitrile rubber seals to optimize grease retention and reduce contamination
See More

(1 reviews)
View Product

Spicer – Universal Joint (Part No.5-1410X)

Universal Joint

from

$51.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

(1 reviews)
View Product

National – Shaft Repair Sleeve (Part No.99174)

Shaft Repair Sleeve

from

$45.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

(1 reviews)
View Product

National – Multi Purpose Seal (Part No.4529N)

Multi Purpose Seal

from

$10.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More
View Product

Felpro – Drive Axle Shaft Flange Gasket (Part No.55350)

Drive Axle Shaft Flange Gasket

from

$4.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

(11 reviews)
View Product

Autopart International Inc – Wheel Bearing (Part No.K8000651790API)

Wheel Bearing

from

$44.91
Wheel Bearing
View Product

NTN – Wheel Bearing (Part No.K8000345509NTN)

Wheel Bearing

from

$97.49
Wheel Bearing
View Product

FAG US – AXLE BEARING (Part No.FC68302)

AXLE BEARING

from

$35.49
AXLE BEARING
View Product

ACDelco – Differential Bearing (Part No.J7060366581ACD)

Differential Bearing

from

$176.13
Differential Bearing
View Product

SKF – Axle Seal (Part No.K4021403278SKF)

Axle Seal

from

$28.51
Axle Seal
View Product

Yukon Gear – Axle Seal For 9.5" GM (Part No.30042)

Axle Seal For 9.5" GM

from

$21.99
Axle seal for 9.5″ GM.Yukon Mighty seal.

Product Features:
  • Rear axle seal
  • Fits GM 9.5″
See More
View Product

Pro-King – Differential Axle Seal (Part No.744A074)

Differential Axle Seal

from

$10.99
Pro-King High Quality Differential Products are designed for trouble free installation and setup.
See More
View Product

Yukon Gear – Full-Floating Axle Seal For GM 14T (Part No.30018)

Full-Floating Axle Seal For GM 14T

from

$13.99
Full-floating axle seal for GM 14T.Yukon Mighty seal.

Product Features:
  • Rear axle seal
  • Fits GM 10.5″ 14 bolt truck
See More
View Product

1980 GMC C2500 Drive Shafts and Axles

Maybe you’re in the middle of a full rebuild of that 1980 GMC C2500. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 30 different Drive Shafts and Axles in our inventory ranging from $4.49 to $1,134.99. That means you can find the exact parts or products you need to keep that 1980 GMC C2500 running smoothly.

Drive Shafts and Axles are only as good as their brand. We stock 9 different brands to make sure you have plenty of trusted parts to choose from for your 1980 GMC C2500. Spicer, FELPRO, and Anchor are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Drive Shafts and Axles for your 1980 GMC C2500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 483 reviews in this category, some of the top rated parts include Universal Joint with 4.0 stars and Axle Shaft Lock Assortment with 4.3 stars.

So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 1980 GMC C2500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Drive Shafts and Axles Brands To Make Your 1980 GMC C2500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1980 GMC C2500 demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your C2500 the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.

Popular Driveworks Drive Shafts and Axles

We carry Driveworks parts in our stock across Axle Shaft Universal Joints categories, plus more. For a 1980 GMC C2500, our most popular Driveworks Drive Shafts and Axles include:
Universal Joint
from $15.99
(1)
Universal Joint
Axle Shaft Universal Joints

Top 1980 GMC C2500 Drive Shafts and Axles from National

National products are another trusted brand when it comes to Drive Shafts and Axles for your 1980 GMC C2500. Popular National parts include:
Multi Purpose Bearing
from $44.99
(25)
Multi Purpose Bearing
Drive Shaft Center Supports
Multi Purpose Bearing
from $46.49
(1)
Multi Purpose Bearing
Drive Shaft Center Supports

FAQs for 1980 GMC C2500 Drive Shafts and Axles

What are the most purchased Drive Shafts and Axles for the 1980 GMC C2500?

Out of 30 Drive Shafts and Axles for the 1980 GMC C2500, the most popular in our inventory are:
Drive Axle Shaft Flange Gasket
from $4.79
(11)
Drive Axle Shaft Flange Gasket
Axle Flange Gaskets
Universal Joint
from $42.99
(5)
Universal Joint
Axle Shaft Universal Joints
Center Support Bearing Motor Mount: Center, 1 Piece
from $22.79
(13)
Center Support Bearing Motor Mount: Center, 1 Piece
Center Support Bearings

What are the top-rated 1980 GMC C2500 Drive Shafts and Axles?

Top-rated Drive Shafts and Axles for your 1980 GMC C2500 based on customer reviews/ratings are:
Universal Joint
from $44.99
(7)
Universal Joint
“Good product; easier to install; one bad thing is caps fall off easy, seems lite on greese”
Axle Shaft Lock Assortment
from $6.49
(3)
Axle Shaft Lock Assortment
“Lucky for me they had it in stock. Parts man was excellent”
Universal Joint
from $35.99
(2)
Universal Joint
“I use this on a 4×4 off-road. It’s always a tough trade-off between the greaseable and non-greasable u-joints. The non-greaseable is stronger. The”

More Popular Parts for All Makes