1980 Dodge RD200 Clutch Systems
More 1980 Dodge RD200 Clutch Systems Categories
If you’re looking for an original Clutch Systems replacement for a 1980 Dodge RD200, you can search through our selection below. You’ll also find aftermarket and OEM Clutch Systems to meet your needs.
Essential 1980 Dodge RD200 Clutch Systems
ATP – FLYWHEEL SHIM (Part No.TS-5)
from
$30.99
FLYWHEEL SHIM
ATP – FLYWHEEL SHIM (Part No.TS-4)
from
$22.99
FLYWHEEL SHIM
ATP – Automatic Transmission Flex Plate (Part No.Z-439)
from
$34.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
Carquest Premium – New Flywheel (Part No.50-3409)
from
$119.99
Flywheel hot spots can cause chatter. Resurfacing a flywheel doesn’t always remove hot spots. The flywheel may look shiny and pretty, but the hot spots will often still be there. Service the System by replacing the flywheel and the clutch set at the same time. All flywheels come with a new ring gear.
Product Features:
See More
Product Features:
- Casting process closely monitored to ensure uniform density and balance retention
- Eliminates chance of chatter due to hot spots not always removed by resurfacing
- New ring gear ensures positive starter engagement
- Engineered to properly fit the intended application with no modifications
ATP – Automatic Transmission Flex Plate (Part No.Z-196)
from
$14.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
B & M – Chrysler SFI Flexplate – 62 & Later Internally Balanced 8-Bolt Crank – A727 A904 (Part No.10231)
from
$149.99
As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1962-up A727, A904 transmissions and all internally balanced Chrysler, Dodge and Plymouth V8 engines with 8-bolt crankshaft flange. Features include high tensile strength steel construction to resist elongation and cracking, 10.00 inch bolt pattern and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953.
Product Features:
See More
Product Features:
- NHRA/IHRA Legal For All Classes
- Includes SFI Certification Sticker
- Ideal For Street Applications
- To Extreme Duty Racing
- To High RPM Use
Carquest Premium – New Clutch Set (Part No.MU1862-1D)
from
$124.99
New Perfection Clutch Sets include the following: New OEM-style cover assembly, computer-tested for clamp load, plate lift, and finger height; new OEM-style clutch disc with facings built to exceed OEM specifications; new clutch release bearing meeting or exceeding OEM specifications (where supplied); new pilot bearing/bushing (where used); alignment tool for the perfect clutch installation (where available); hydraulic line disconnect tool (where used).
Product Features:
See More
Product Features:
- New clutch disc with non-asbestos facings built to exceed OEM specifications for durability, safety, and positive engagement.
- Cover assembly is computer tested for clamp load, plate lift and finger height to ensure uniform and smooth operation
- Alignment tool included where available to ensure professional installation
- Where required, includes new pilot bearing or bushing to complete the job
Driveworks – Ball Bearing (Part No.SL-203-FF)
from
$13.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Hays – Street/Strip; Clutch Pressure Plate (Part No.31-212)
from
$385.99
Features a heavy-duty cover to minimize flex, ensure strength, stability and reliability. Ductile iron pressure ring resists cracking to avoid coming apart under the severe stress of racing and high RPM. An excellent choice for high performance street and strip applications.
Product Features:
See More
Product Features:
- Heavy-Duty Cover
- Minimizes Flex
- Ensures Strength and Stability
- Ductile Iron Pressure Ring
- High Cone Belleville Spring
- Light Pedal Pressure
- Quick and Clean Release
Popular 1980 Dodge RD200 Clutch Systems Categories
1980 Dodge RD200 Clutch Systems
You count on your 1980 Dodge RD200 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Clutch Systems. With 10 Clutch Systems ranging in price from $13.29 to $385.99, you’re sure to find everything you need for your 1980 Dodge RD200.
Brands matter. If you want to shop a specific Clutch Systems brand, we stock 5 different brands like DriveWorks, ATP, and Carquest Premium. 1980 Dodge RD200 Clutch Systems start as low as $13.29!
One of the best ways to find top quality OEM or aftermarket Clutch Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 17 extensive product reviews on 1980 Dodge RD200 Clutch Systems.
Did we mention you can order your Clutch Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Clutch Systems inventory for your 1980 Dodge RD200 below to get started!
Top-Rated Clutch Systems Brands For Your 1980 Dodge RD200
Trusted Clutch Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1980 Dodge RD200 running right for years to come. In our inventory you’ll find brands like DriveWorks, ATP, Carquest Premium, and even more.
Popular Carquest Premium Clutch Systems
You’ll find popular Carquest Premium brand products across Flywheels and Clutch Kits. All are waiting to get your 1980 Dodge RD200 back on the road. Some of the top-rated Carquest Premium products in these categories are:
Top-Rated Clutch Systems
If are what you’re looking for, our inventory holds plenty. We stock brand Clutch Systems for your 1980 Dodge RD200, and some of our most reviewed parts include:
FAQs for 1980 Dodge RD200 Clutch Systems
What are the most purchased Clutch Systems for the 1980 Dodge RD200?
Out of 10 Clutch Systems for the 1980 Dodge RD200, the most popular in our inventory are:
from
$149.99
This product is not rated
Chrysler SFI Flexplate – 62 & Later Internally Balanced 8-Bolt Crank – A727 A904
Flywheels and Flexplates
