1980 Dodge D300 Differentials

Essential 1980 Dodge D300 Differentials

Yukon Gear – O-Ring For Dana 60 Zip Locker Seal Housing (Part No.34006)

O-Ring For Dana 60 Zip Locker Seal Housing

from

$11.29
Product Features:
  • O-ring for seal housing
  • Fits Dana Spicer 60
See More

Yukon Gear – Set Up Bearing (Part No.56067)

Set Up Bearing

from

$153.99
Set-up bearing (one bearing). HM803146. No return.

Product Features:
  • Set up bearing
  • Fits HM803146 pinion bearing
  • Easily slips on and off pinion journal to allow for pinion depth adjustment
See More

Yukon Gear – Steel Spool For Dana 60 With 35 Spline Axles, 4.56 & Up (Part No.32043)

Steel Spool For Dana 60 With 35 Spline Axles, 4.56 & Up

from

$414.99
Yukon Performance spool for Dana 60 with 35 spline axles. fits 4.56 and up. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Chrysler Dana Spicer 60 with 35 spline axles
  • 4.56 and up ratio only
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

Yukon Gear – Replacement Trail Repair Kit For Dana 60 With 1310 Size U/Joint And U-Bolts (Part No.32282)

Replacement Trail Repair Kit For Dana 60 With 1310 Size U/Joint And U-Bolts

from

$251.99
Yukon replacement trail repair kit for Dana 60 with 1310 size U/joint and u-bolts. This kit comes with a yoke, U/joint, pinion seal, U/bolt or strap kit, pinion nut, and pinion nut washer (if applicable).

Product Features:
  • Fits Dana Spicer 60 and 70
  • 1310 u-joint size
  • Kit includes yoke, U-joint, pinion seal, pinion nut and washer, U-bolts and threadlocker
See More

Yukon Gear – Differential Side Bearing Screw Adjuster For 9.25" Chrysler (Part No.33256)

Differential Side Bearing Screw Adjuster For 9.25" Chrysler

from

$64.99
Differential side bearing screw adjuster for 9.25″ Chrysler.

Product Features:
  • Side adjuster for Chrysler 9.25″ rear
See More

Yukon Gear – Dana 70 & Dana 80 Standard Open Cross Pin Shaft (Part No.33324)

Dana 70 & Dana 80 Standard Open Cross Pin Shaft

from

$69.99
Dana 70 & Dana 80 standard Open cross pin shaft, one piece case.

Product Features:
  • Cross pin shaft
  • Fits Dana Spicer 70 and 80
See More

Felpro – DIFFERENTIAL GASKET (Part No.RDS 6095-1)

DIFFERENTIAL GASKET

from

$8.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Bearing Race Driver (Part No.56023)

Bearing Race Driver

from

$219.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits M88010 race
  • All steel construction
See More

Powertrax – Grip PRO Traction System (Part No.GT436035)

Grip PRO Traction System

from

$596.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

Powertrax – Grip LOK Traction System (Part No.LK436035)

Grip LOK Traction System

from

$684.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

Yukon Gear – Side Gear Thrust Washer For Dana 60, 70 & 80 (Part No.33532)

Side Gear Thrust Washer For Dana 60, 70 & 80

from

$4.99
Product Features:
  • Side gear thrust washer for Dana Spicer 60, 70, 70U, 70HD and 80
  • Fits standard open differentials only
See More

Felpro – Differential Cover Gasket (Part No.RDS 6014)

Differential Cover Gasket

from

$15.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Full-Floating, Blank 35 Spline Diameter, Non-Drilled Axle Shaft For Dana 60 (Part No.21005)

Full-Floating, Blank 35 Spline Diameter, Non-Drilled Axle Shaft For Dana 60

from

$232.99
Full-floating, 35 spline diameter, non-drilled blank axle shaft for Dana 60. 40″ inches long. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H axles come with a one year warranty against manufacturing defects.
See More

Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)

Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD

from

$37.99
Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.

Product Features:
  • Redi-Sleeve yoke saver
  • Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD
See More

Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)

Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement

from

$3.99
Product Features:
  • Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″
See More

Pro-King – Clutch Pack (Part No.717A119)

Clutch Pack

from

$211.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Differential (Part No.26040)

Differential

from

$939.99
Differential

Yukon Gear – Pinion Install Kit For Chrysler 9.25" Differential (Part No.13011)

Pinion Install Kit For Chrysler 9.25" Differential

from

$276.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Chrysler 9.25″ rear
  • Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
See More

Dorman – Help – Differential Plug, Rubber (Part No.65293)

Differential Plug, Rubber

from

$5.99
This differential cover plug is designed to match the fit & function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this differential cover plug matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Replacement Inner Slinger For Dana 60 (Part No.33014)

Replacement Inner Slinger For Dana 60

from

$9.99
Product Features:
  • Inner oil slinger for Dana Spicer 60
See More

Yukon Gear – Replacement Baffle For Dana 70 & 70HD (Part No.33003)

Replacement Baffle For Dana 70 & 70HD

from

$7.99
Product Features:
  • Oil baffle
  • Fits Dana Spicer 70 and 70HD
See More

Yukon Gear – Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70 (Part No.23007)

Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70

from

$13.99
Product Features:
  • Cover gasket
  • Fits Dana Spicer 60, 70, 70U and 70HD
See More

Dorman – Help – Pinion Crush Sleeve (Part No.81059)

Pinion Crush Sleeve

from

$7.49
This differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles.
  • Required replacement – when servicing the differential
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Zip Locker Switch (Part No.34015)

Zip Locker Switch

from

$16.99
ZIP locker switch.

Product Features:
  • Switch
See More

Yukon Gear – Steel Cover For Dana 60 Standard Rotation (Part No.32321)

Steel Cover For Dana 60 Standard Rotation

from

$114.99
Product Features:
  • Fits standard rotation Dana Spicer 60
  • Steel
See More

Yukon Gear – Replacement Carrier Shim Kit For Dana 70 & 70HD (Part No.55019)

Replacement Carrier Shim Kit For Dana 70 & 70HD

from

$126.99
Product Features:
  • Carrier shim kit
  • Fits Dana Spicer 70 and 70HD
See More

USA Standard Gear – Replacement Spider Gear Set For Dana 60, 35 Spline (Part No.39009)

Replacement Spider Gear Set For Dana 60, 35 Spline

from

$198.99
Product Features:
  • Spider gear kit
  • Fits Dana Spicer 60, 35 spline open differential
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Motive Gear – Differential Carrier Bearing Kit – Koyo (Part No.R10.5CK)

Differential Carrier Bearing Kit - Koyo

from

$112.99
Product Features:
  • CARRIER BEARING KIT FORD 10.5″
See More

1980 Dodge D300 Differentials

Maybe you’re in the middle of a full rebuild of that 1980 Dodge D300. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 277 different Differentials in our inventory ranging from $2.29 to $1,566.99. That means you can find the exact parts or products you need to keep that 1980 Dodge D300 running smoothly.

Differentials are only as good as their brand. We stock 14 different brands to make sure you have plenty of trusted parts to choose from for your 1980 Dodge D300. Yukon Gear, National, and Motive Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1980 Dodge D300, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 172 reviews in this category, some of the top rated parts include Differential Carrier Gear Kit with 3.7 stars and DIFFERENTIAL GASKET with 3.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1980 Dodge D300 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1980 Dodge D300 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1980 Dodge D300 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your D300 the best it can be. Be sure to browse some of our top Differentials brands and parts.

FAQs for 1980 Dodge D300 Differentials

What are the most purchased Differentials for the 1980 Dodge D300?

Out of 277 Differentials for the 1980 Dodge D300, the most popular in our inventory are:
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Ring Gear Bolt
from $2.49
This product is not rated
Ring Gear Bolt
Differential Ring Gear Bolts
Bearings
from $9.99
(8)
Bearings
Rear Differential Pinion Bearings

What are the top-rated 1980 Dodge D300 Differentials?

Top-rated Differentials for your 1980 Dodge D300 based on customer reviews/ratings are:
Differential Carrier Gear Kit
from $219.99
(6)
Differential Carrier Gear Kit
“Great customer service”
DIFFERENTIAL GASKET
from $8.29
(4)
DIFFERENTIAL GASKET
“Great Product”
Bearings
from $22.99
(3)
Bearings
“works great !!!”