1980 Dodge B100 Differentials

Essential 1980 Dodge B100 Differentials

FAG US – TAPERED ROLLER BEARI (Part No.KT17)

TAPERED ROLLER BEARI

from

$15.29
TAPERED ROLLER BEARI

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

Dana 60, Dana 70 & Dana 80 Cover Bolt

from

$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:
  • Cover bolt for Dana Spicer 60, 70 and 80
  • 3/8″
See More

Felpro – Differential Cover Gasket (Part No.RDS 55073)

Differential Cover Gasket

from

$9.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Pinion Install Kit For Chrysler 9.25" Differential (Part No.13011)

Pinion Install Kit For Chrysler 9.25" Differential

from

$276.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Chrysler 9.25″ rear
  • Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Replacement Ring Gear Bolt For Dana 60, 70, 70U & 70HD, 1/2" X 18 (Part No.33037)

Replacement Ring Gear Bolt For Dana 60, 70, 70U & 70HD, 1/2" X 18

from

$4.99
Replacement ring gear bolt for Dana 60, 70, 70U & 70HD, 1/2″ x 18.

Product Features:
  • Ring gear bolt for Dana Spicer 60, 70, 70U and 70HD
  • 1/2″ x 18 thread
See More

Yukon Gear – Carrier Installation Kit For ’76 & Up Chrysler 8.25" Rear (Part No.57014)

Carrier Installation Kit For '76 & Up Chrysler 8.25" Rear

from

$78.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for ’76 & up Chrysler 8.25″ rear.

Product Features:
  • Fits 1976 and up Chrysler 8.25″
  • Includes carrier bearings and races
See More

Yukon Gear – Cross Pin Shaft For Standard Open Chrysler 9.25" (Part No.33311)

Cross Pin Shaft For Standard Open Chrysler 9.25"

from

$46.99
Cross pin shaft for standard open Chrysler 9.25″, .860″ diameter. Will not fit posi!

Product Features:
  • Cross pin shaft for Chrysler 9.25″
  • Fits standard open differentials only
  • 0.860″ diameter
See More

Powertrax – Grip PRO Traction System (Part No.GT436035)

Grip PRO Traction System

from

$596.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

USA Standard Gear – Replacement Spider Gear Set For Dana 60, 35 Spline (Part No.39009)

Replacement Spider Gear Set For Dana 60, 35 Spline

from

$198.99
Product Features:
  • Spider gear kit
  • Fits Dana Spicer 60, 35 spline open differential
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Yukon Gear – Dana 60 & Dana 61 Tracloc Clutch Set (Part No.16156)

Dana 60 & Dana 61 Tracloc Clutch Set

from

$269.99
Dana 60 & Dana 61 TracLoc clutch set.

Product Features:
  • Clutch kit
  • Fit Dana Spicer 60 Trac Loc positraction
See More

Yukon Gear – Bearing Race Driver (Part No.56023)

Bearing Race Driver

from

$219.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits M88010 race
  • All steel construction
See More

Yukon Gear – Bearing Install Kit For ’00 & Down Chrysler 9.25" Rear Differential (Part No.11011)

Bearing Install Kit For '00 & Down Chrysler 9.25" Rear Differential

from

$274.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:
  • Fits 2000 and down Chrysler 9.25″ rear
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve , marking compound and brush.
See More

Yukon Gear – High Performance Replacement Ring & Pinion Gear Set For Dana 60 In A 4.88 Ratio, Thick (Part No.24605)

High Performance Replacement Ring & Pinion Gear Set For Dana 60 In A 4.88 Ratio, Thick

from

$489.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits standard rotation Dana Spicer 60
  • 9.75″ ring gear diameter
  • 29 spline pinion
  • 12 ring gear bolts
  • 4.88 ratio
  • Thick gear for 4.11 and down carrier
See More

Dorman – Help – Differential Plug, Rubber (Part No.65293)

Differential Plug, Rubber

from

$5.99
This differential cover plug is designed to match the fit & function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this differential cover plug matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

USA Standard Gear – Steel Spool For Dana 60 With 35 Spline Axles, 4.56 & Up (Part No.59018)

Steel Spool For Dana 60 With 35 Spline Axles, 4.56 & Up

from

$369.99
Product Features:
  • Fits Chrysler Dana Spicer 60 with 35 spline axles
  • 4.56 and up ratio only
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

Driveworks – Differential Pinion Seal (Part No.S-5126)

Differential Pinion Seal

from

$9.49
Product Features:
  • Brand may vary by location
See More

Yukon Gear – Seal Housing For Dana 60, Zip Locker, With O-Rings (Part No.34039)

Seal Housing For Dana 60, Zip Locker, With O-Rings

from

$79.99
Seal housing for Dana 60, Zip locker, with o-rings.

Product Features:
  • Seal housing for Dana Spicer 60
  • Includes o-rings
See More

Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)

Dana 60 & Dana 70 Power Lok Case Bolt

from

$7.99
Dana 60 & Dana 70 Power Lok case bolt.

Product Features:
  • Power Lok case bolt for Dana Spicer 60 and 70
  • 7/16 x 14 thread
  • 3.5″ long
  • 9/16″ hex head
See More

Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)

Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement

from

$3.99
Product Features:
  • Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″
See More

Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25"

from

$27.99
8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

Product Features:
  • Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″
See More

Yukon Gear – Grizzly Locker For Dana 60, 4.10 & Down, 30 Spline (Part No.28002)

Grizzly Locker For Dana 60, 4.10 & Down, 30 Spline

from

$1025.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000! This is a narrow case locker. If you have a wide housing, please order two DS 42563 with your locker. This locker is ABS compatible.

Product Features:
  • Fits Dana Spicer 60 with 30 spline axles
  • 4.10 and down ratio only
  • Patented internal design reduces common locker failures
  • 8620 internals for added strength
  • Assembled in the USA
See More

Needa Parts – Rubber Differential Plug Chrysler 2008-2000 (sold by each) (Part No.090-062)

Rubber Differential Plug Chrysler 2008-2000 (sold by each)

from

$10.99
This differential cover plug is designed to match the fit & function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this differential cover plug matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)

Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD

from

$37.99
Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.

Product Features:
  • Redi-Sleeve yoke saver
  • Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD
See More

Yukon Gear – Six Piece Side Gear And Thrust Washer Kit For Chrysler 8" And 9.25" (Part No.33278)

Six Piece Side Gear And Thrust Washer Kit For Chrysler 8" And 9.25"

from

$98.99
Six piece side gear thrust washer kit for Chrysler 8″ and 9.25″.

Product Features:
  • Side gear thrust washer kit
  • Fits Chrysler 8″ and 9.25″
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Yukon Gear – 1541H Alloy 5 Lug Rear Axle For ’84 And Older Chrysler 8.25" Van With A Length Of 32-5/8 Inch (Part No.21015)

1541H Alloy 5 Lug Rear Axle For '84 And Older Chrysler 8.25" Van With A Length Of 32-5/8 Inch

from

$454.99
Yukon 1541H alloy 5 lug rear axle for ’84 and older Chrysler 8.25″ van with a length of 32-5/8 inches and 27 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a C-clip axle.

Product Features:
  • 27 spline
  • 5 x 4.5″ bolt pattern
  • 32 5/8″ long
  • Fits Chrysler 8.25″ in 1984 and down Dodge van
See More

Yukon Gear – Pinion Nut For Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan Rear 1 5/16" Nut 7/8" X 14 Thread (Part No.33144)

Pinion Nut For Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan Rear 1 5/16" Nut 7/8" X 14 Thread

from

$7.99
Replacement pinion nut for Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan rear. 1 5/16″ nut, 7/8″ x 14 thread.

Product Features:
  • Pinion nut for Jeep JK rear, Dana Spicer 44HD, 60, 70, 70U, 70HD and Nissan Titan rear
  • 7/8″ x 14 thread
  • 1 5/16″ socket
See More

Motive Gear – Pinion Nut (Part No.1260823)

Pinion Nut

from

$8.49
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
See More

1980 Dodge B100 Differentials

Maybe you’re in the middle of a full rebuild of that 1980 Dodge B100. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 317 different Differentials in our inventory ranging from $2.29 to $1,849.99. That means you can find the exact parts or products you need to keep that 1980 Dodge B100 running smoothly.

Differentials are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 1980 Dodge B100. FELPRO, Yukon Gear, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1980 Dodge B100, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 450 reviews in this category, some of the top rated parts include Differential Carrier Gear Kit with 3.7 stars and Differential Pinion Shim Kit with 5.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1980 Dodge B100 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1980 Dodge B100 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1980 Dodge B100 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your B100 the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Dorman Differentials

We carry Dorman parts in our stock across Differential Ring and Pinions and Differential Cover Plugs categories, plus more. For a 1980 Dodge B100, our most popular Dorman Differentials include:
Differential Ring And Pinion Set
from $384.99
(2)
Differential Ring And Pinion Set
Differential Ring and Pinions
Differential Plug, Rubber
from $5.99
(11)
Differential Plug, Rubber
Differential Cover Plugs

Top 1980 Dodge B100 Differentials from Felpro

Felpro products are another trusted brand when it comes to Differentials for your 1980 Dodge B100. Popular Felpro parts include:
Differential Cover Gasket
from $9.49
(34)
Differential Cover Gasket
Rear Differential Cover Gaskets
DIFFERENTIAL GASKET
from $6.79
(21)
DIFFERENTIAL GASKET
Rear Housing Cover Gaskets

FAQs for 1980 Dodge B100 Differentials

What are the most purchased Differentials for the 1980 Dodge B100?

Out of 317 Differentials for the 1980 Dodge B100, the most popular in our inventory are:
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Bearings
from $23.99
(7)
Bearings
Front Differential Pinion Bearings
Ring Gear Bolt
from $2.49
This product is not rated
Ring Gear Bolt
Differential Ring Gear Bolts

What are the top-rated 1980 Dodge B100 Differentials?

Top-rated Differentials for your 1980 Dodge B100 based on customer reviews/ratings are:
Differential Carrier Gear Kit
from $219.99
(6)
Differential Carrier Gear Kit
“Great customer service”
Differential Pinion Shim Kit
from $7.49
(1)
Differential Pinion Shim Kit
“good product”
Differential Crush Sleeve
from $2.49
(1)
Differential Crush Sleeve
“High quality, would buy again”