1980 Chrysler Newport Motor Oil

Essential 1980 Chrysler Newport Motor Oil

Castrol – EDGE 10W-30 Full Synthetic Motor Oil, 5 Quart (Part No.1598B6)

EDGE 10W-30 Full Synthetic Motor Oil, 5 Quart

from

$37.99
Castrol EDGE 10W-30 Full Synthetic Motor Oil is Castrol’s strongest oil, ideal for drivers seeking the best in sludge protection, wear protection, and maximum engine performance. This oil is 3X stronger against viscosity breakdown than the leading full synthetic, 10X better in high-temperature performance, and offers 6X better wear protection. It meets API SP/SN PLUS, ILSAC GF-6, ACEA A1/B1, GM 6094M, and 4718M standards, and fulfills the engine test requirements of Chrysler MS 6395, ensuring top-tier performance and reliability. Unlock maximum performance with every drive.

Product Features:
  • 3X Stronger against viscosity breakdown than the leading full synthetic – Based on Kurt Orbahn test in 5W-30 grade
  • 10X Better High Temperature performance – As measured in Seq IIIH engine test vs. API SP limit
  • 6X Better Wear Protection – As measured in Seq IVA test vs. latest test limit
  • Meets API SP/SN PLUS, ILSAC GF-6, ACEA A1/B1, GM 6094M and 4718M, Meets engine test requirements of Chrysler MS 6395
  • Advanced Fluid TITANIUM Technology: Incorporates Fluid TITANIUM Technology, making it Castrol’s strongest oil for drivers who demand the best in sludge protection, wear protection, and maximum engine performance.
See More

Castrol – EDGE Euro Car 5W-40 A3/B4 Full Synthetic Engine Oil 5 Quart (Part No.15B6FE)

EDGE Euro Car 5W-40 A3/B4 Full Synthetic Engine Oil 5 Quart

from

$37.99
CASTROL EDGE Euro Car 5W-40 A3/B4 Full Synthetic Motor Oil is a high-performance motor oil that is designed to provide superior engine protection and performance. This full-synthetic motor oil is optimized to deliver 40% better performance than other synthetic oils and is recommended by leading auto manufacturers. It provides engine protection for the entire drain interval and meets API CF/SN, ACEA A3/B4, BMW LL 01, MB Approval 229.5/226.5, and VW 502 00/505 00 specifications. This motor oil is 10x stronger against high-temperature oil thickening and helps improve fuel economy. It is formulated for the latest technology, high-output engines that operate at extreme temperatures and covers European OEM gasoline specifications for BMW, Mercedes-Benz, Porsche, and VW/Audi.

Product Features:
  • Optimized to deliver 40% better performance than required by acea standards
  • Recommended by world leading auto manufacturers
  • Engine protection for the entire drain interval even under extreme pressure of high output engines
  • Meets api cf/sn, acea a3/b4, bmw ll 01, mb approval 229.3/229.5, porsche a40, vw 502 00/505 00, renault rn 0700/0710
  • 10x stronger against high temperature oil thickening vs. industry standards(seq iiih vs api sn plus limits)
  • Helps improve fuel economy
  • Exceeds: acea a3/b4. api sn/cf, bmw longlife-01, mb-approval 229.3, porsche a40, vw 502 00 / 505 00
See More

Castrol – EDGE High Mileage 5W-30 Full Synthetic Engine Oil 1 Quart (Part No.15979F)

EDGE High Mileage 5W-30 Full Synthetic Engine Oil 1 Quart

from

$12.99
CASTROL EDGE High Mileage 5W-30 Full Synthetic Motor Oil 1 Quart is the perfect choice for vehicles with over 75K miles. It is formulated with Fluid Titanium Technology that provides 10X better high-temperature performance and 6X better wear protection. The oil is designed with Phosphorus Replacement Technology that preserves the catalytic converter and the emission system. It meets API SP/SN PLUS, ILSAC GF-6, GM dexos1 Gen 2, and other OEM specifications. Castrol EDGE High Mileage is a full synthetic motor oil that offers superior performance and protection for high mileage engines. It is available in different grades, including 5W-20, 5W-30, and 10W-30. Try Castrol EDGE High Mileage today and extend the life of your engine.

Product Features:
  • 10x better high temperature performance – as measured in seq iiih engine test vs. api sp limit
  • 6x better wear protection – as measured in seq iva test vs. latest test limit
  • From the makers of the No. 1 high mileage brand
  • Meets api sp/sn plus, ilsac gf-6, gm dexos1 gen 2, meets ford wss-m2c961-a1 and wss-m2c946-b1, meets engine test requirements of chrysler ms 6395 and 13340
  • Castrol edge offers engine oils that meet oem specification approvals or licenses that cover over 97.3% of the us car parc.
  • Available in the following grades: 5w-20, 5w-30, 10w-30, and 10w-40
  • Try castrol edge high mileage today
See More

FRAM – 10W-30 High Mileage Conventional Motor Oil, Reduces Oil Consumption, 5 Quart (Part No.F665-5QT)

10W-30 High Mileage Conventional Motor Oil, Reduces Oil Consumption, 5 Quart

from

$25.99
FRAM Conventional High Mileage 10W30 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 10W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 10W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:
  • Formulated with a unique combination of premium base oils and an enhanced additive system
  • Provides increased protection in higher mileage engines
  • Helps restore seal condition to reduce oil consumption
  • Increases protection against high temperature deposits and ring sticking
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Sludge Cleanup and Engine Efficiency: Formulated to help clean out sludge buildup, keeping engines running clean with increased efficiency and power.
  • Versatile Compatibility: Protects domestic and imported vehicles and equipment powered by gasoline or light-duty diesel engines, including turbocharged and supercharged engines.
  • Meets Stringent Standards: Formulated to meet or exceed all new car manufacturers’ warranty requirements and stringent industry standards API SP/CF, and ILSAC GF-6A Resource Conserving Service Category.
See More

FRAM – 5 Qt Conventional 5W30 Engine Oil with Low-Speed Pre-Ignition Control (Part No.F620-5QT)

5 Qt Conventional 5W30 Engine Oil with Low-Speed Pre-Ignition Control

from

$25.99
FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Reliable engine protection: FRAM Conventional Oil 5W30 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
See More

Valvoline – High Mileage with MaxLife Technology Synthetic Blend 10W-30 Motor Oil: Maximize Engine Life, 5 Quart (Part No.779462)

High Mileage with MaxLife Technology Synthetic Blend 10W-30 Motor Oil: Maximize Engine Life, 5 Quart

from

$31.99
75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:
  • MAXLIFE TECHNOLOGY PREVENTS engine breakdown with 40% better wear protection than the industry standard
  • REFRESH AGING SEALS AND PREVENT LEAKS with seal conditioners
  • REDUCE SLUDGE, DEPOSITS, CORROSION, AND RUST with added detergents – keep motors clean inside
  • ENHANCED FRICTION PERFORMANCE HELPS MAXIMIZE POWER with advanced friction-fighting agents
  • MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
  • MaxLife Technology: Valvoline High Mileage with MaxLife Technology is specially formulated to maximize engine life in vehicles with over 75,000 miles, providing superior protection against wear, friction, heat, and deposits.
  • Synthetic Blend Composition: This motor oil features a unique combination of synthetic and premium conventional oils, ensuring optimal performance and protection for high-mileage engines.
See More

Castrol – GTX Magnatec 10W-30 Synthetic Blend Motor Oil (1 Quart) (Part No.15B0B4)

GTX Magnatec 10W-30 Synthetic Blend Motor Oil (1 Quart)

from

$9.49
The intelligent molecules in Castrol GTX MAGNATEC are what set it apart from other engine oils. These ultra-refined molecular components cling to the engine throughout all driving conditions, even when the engine is off. When the engine stops, oil drains back to the sump, but the intelligent molecules in Castrol GTX MAGNATEC don’t. They cling to critical engine parts like a magnet, providing an extra layer of protection from the start and throughout warm-up. Only Castrol GTX Magnatec is uniquely formulated to provide instant protection from the moment of start.

Product Features:
  • Cling to critical engine parts when the oil drains down
  • Add a layer of protection during warm-up and beyond
  • Dramatically reduce engine wear
  • Leave critical engine parts 4X smoother
See More

FRAM – Full Synthetic 5W-30 Dexos1 Gen 3 Engine Oil: 5 Quart (Part No.F930-5QT)

Full Synthetic 5W-30 Dexos1 Gen 3 Engine Oil: 5 Quart

from

$27.99
FRAM Engine Oil Full Synthetic SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 3 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-30 and is a fully licensed GM dexos1 Gen 3 motor oil.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Excellent sludge and varnish protection
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
See More

FRAM – 10W-30 Conventional Motor Oil, Prevents Low-Speed Pre-Ignition, 1 Quart (Part No.F630)

10W-30 Conventional Motor Oil, Prevents Low-Speed Pre-Ignition, 1 Quart

from

$6.49
FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-Speed Pre-Ignition Control
  • Chain Wear Protection
  • Piston Cleanliness
  • Turbo-Compatibility
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Versatile Compatibility: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI), as well as older carbureted or normally fuel-injected gasoline engine designs.
  • High-Quality Conventional Base Stocks: Utilizes a blend of high-quality conventional base stocks to ensure reliable engine protection across a broad range of operating conditions.
  • Meets Stringent Standards: Complies with API SP, SN Plus, SN, SM, and ILSAC GF-6A, GF-5, and earlier API and ILSAC Service Categories, ensuring it meets the latest industry requirements.
  • SAE oil weight of 10W-30, making it a dependable choice for various engine types.
See More

Castrol – EDGE Euro Car 5W-40 A3/B4 Full Synthetic Engine Oil 1 Quart (Part No.152C7E)

EDGE Euro Car 5W-40 A3/B4 Full Synthetic Engine Oil 1 Quart

from

$12.49
CASTROL EDGE Euro Car 5W-40 A3/B4 Full Synthetic Motor Oil is a high-performance engine oil that is specifically designed for the latest technology, high output engines that operate at extreme temperatures. This full-synthetic motor oil is formulated to deliver 40% better performance than other motor oils, and it is recommended by world-leading auto manufacturers. It provides engine protection for the entire drain interval and meets API CF/SN, ACEA A3/B4, BMW LL 01, MB Approval 229.5/226.5, and Porsche A40 specifications. This motor oil is Porsche-approved except for Cayenne V6 and MB-Approved 229.5. It transforms under pressure, increasing film strength to prevent oil breakdown and reduce friction to unlock maximum performance. This fluid covers European OEM gasoline specifications for BMW, Mercedes-Benz, Porsche, and VW/Audi.

Product Features:
  • Optimized to deliver 40% better performance than required by acea standards
  • Recommended by world leading auto manufacturers
  • Engine protection for the entire drain interval even under extreme pressure of high output engines
  • Meets api cf/sn, acea a3/b4, bmw ll 01, mb approval 229.3/229.5, porsche a40, vw 502 00/505 00, renault rn 0700/0710
  • Porsche-approved except cayenne v6; mb-approval 229.3
  • SYNTEC Technology: The reformulated EDGE Engine Oil features SYNTEC Technology, which enhances its performance and provides even better protection for your engine.
See More

Castrol – 5W-30 Full Synthetic Motor Oil, Helps Maximize Engine Performance, 1 Quart (Part No.15D452)

5W-30 Full Synthetic Motor Oil, Helps Maximize Engine Performance, 1 Quart

from

$11.99
Castrol Full Synthetic 5W-30 Engine Oil is expertly formulated for highly tuned four-cylinder and latest technology engines that operate at higher temperatures. This full synthetic oil, classified as standard with an SAE oil weight of 5W-30, ensures exceptional lubrication for all engine components, from the valve train to the bearings, providing the strength needed for maximum engine performance.

Product Features:
  • Expertly formulated for highly tuned four-cylinder and latest technology engines that operate at higher temperatures.
  • Full synthetic composition ensures exceptional lubrication for all engine components, from the valve train to the bearings.
  • Classified as standard with an SAE oil weight of 5W-30, providing the strength needed for maximum engine performance.
  • Helps maximize engine performance by maintaining optimal lubrication under high-temperature conditions.
  • Comes in a convenient 1 QT size, perfect for top-offs or completing oil changes.
See More

FRAM – Full Synthetic High Mileage 5W-30 Motor Oil: 1 Quart (Part No.F933)

Full Synthetic High Mileage 5W-30 Motor Oil: 1 Quart

from

$7.99
FRAM Full Synthetic High Mileage SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Reduces oil cumsumption
  • Excellent sludge and varnish protection
  • Slows engine leaks
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Engine Cleaning and Efficiency: Helps clean out sludge buildup, keeping engines running clean with increased efficiency and power, ideal for engines with over 75,000 miles.
  • Advanced LSPI Prevention: Contains additive technology designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines.
  • Comprehensive Engine Protection: Provides increased wear protection, oxidation, and shear stability for higher mileage vehicles, meeting stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications.
See More

Castrol – GTX High Mileage 5W-30 Synthetic Blend Engine Oil: 5 Quart (Part No.15980E)

GTX High Mileage 5W-30 Synthetic Blend Engine Oil: 5 Quart

from

$30.99
Castrol GTX High Mileage motor oil is the leading consumer high-mileage brand. You won’t need to worry about using a high mileage oil or synthetic because this is both. It’s a synthetic blend engine oil that helps extend the life of your engine by protecting against sludge, wear and burn-off and also liquid engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is actually catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage Motor Oil is liquid engineered with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system and find out how many miles you can go on a high-mileage oil, there is no better choice than Castrol GTX High Mileage Motor Oil.

Product Features:
  • Phosphorus replacement technology to help extend the life of the emission system
  • Superior dispersancy that fights sludge build up
  • Exceptional oil burn-off protection exceeding industry standards (based on api and acea volatility specifications)
  • Improved fuel economy (in 5w-20, 5w-30 and 10w-30 grades versus industry specifications)
  • Provides extra protection for older vehicles: Castrol GTX High Mileage Engine Oil is specifically designed to provide extra protection for high mileage engines, helping to extend the life of your vehicle.
  • Synthetic blend composition: This engine oil is a synthetic blend, combining the benefits of both conventional and synthetic oils to provide superior protection against sludge, wear, and burn-off.
See More

FRAM – Full Synthetic High Mileage 10W-30 Motor Oil: 5 Quart (Part No.F943-5QT)

Full Synthetic High Mileage 10W-30 Motor Oil: 5 Quart

from

$28.99
FRAM Full Synthetic High Mileage SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 10W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 10W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Reduces oil cumsumption
  • Excellent sludge and varnish protection
  • Slows engine leaks
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Engine Cleaning and Efficiency: Helps clean out sludge buildup, keeping engines running clean with increased efficiency and power, ideal for engines with over 75,000 miles.
  • Advanced LSPI Prevention: Contains additive technology designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs.
  • Comprehensive Engine Protection: Provides increased wear protection, oxidation, and shear stability for higher mileage vehicles, meeting stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications.
See More

FRAM – High Milage Conventional 5W30 Engine Oil – Helps Restore Seal Condition – 1 Qt (Part No.F660)

High Milage Conventional 5W30 Engine Oil - Helps Restore Seal Condition - 1 Qt

from

$6.49
FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 5W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:
  • Formulated with a unique combination of premium base oils and an enhanced additive system
  • Provides increased protection in higher mileage engines
  • Helps restore seal condition to reduce oil consumption
  • Increases protection against high temperature deposits and ring sticking
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.
See More

Castrol – GTX Ultraclean 5W-30 Synthetic Blend Motor Oil: 5 Quart (Part No.15A66D)

GTX Ultraclean 5W-30 Synthetic Blend Motor Oil: 5 Quart

from

$29.99
Environmental factors such as poor fuel quality, hot weather and stop-start driving conditions can lead to sludge, varnish and carbon build-up in your engine: three factors that reduce engine life, power and fuel economy. Castrol Ultraclean is a synthetic blend engine oil available in 0W-20, 5W-20 and 5W-30 grades. Its double-action formula has been proven to clean away the sludge that can block engine oilways* and helps prevent new sludge formation thanks to its synthetic technology. In fact, it provides up to 1.4X better sludge protection than is demanded by the latest industry standard. If keeping your engine clean is important to you, it’s good to know that no other oil keeps engines cleaner.

Product Features:
  • 1.4X superior sludge protection compared to tough industry standards (As measured in the Sequence VH Sludge test vs. API SP test limits)
  • Advanced protection against viscosity and thermal breakdown
  • Superior protection against high-temperature deposits
  • Premium-quality base oils and anti-wear additives that help extend the life of your engine
  • Double-Action Formula: The synthetic blend engine oil features a double-action formula that effectively cleans away existing sludge and prevents new sludge formation.
  • Versatile Grade Options: Available in 0W-20, 5W-20, and 5W-30 grades, Castrol Ultraclean offers flexibility to suit various engine requirements.
  • Enhanced Engine Performance: By reducing sludge, varnish, and carbon build-up, this oil helps improve engine life, power, and fuel economy.
  • Synthetic Blend Composition: The GTX Ultraclean 5W-30 Synthetic Blend Motor Oil combines the benefits of synthetic technology with the reliability of a standard oil class.
See More

FRAM – Full Synthetic 10W30 Engine Oil – Helps Extend Engine Life – 1 Qt (Part No.F940)

Full Synthetic 10W30 Engine Oil - Helps Extend Engine Life - 1 Qt

from

$7.49
FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high  quality synthetic base stocks and the latest additive technology to provide the ultimate protection  for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI)  and turbo gas-direct engine (TGDI) designs as well as providing increased protection for  carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30  contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead  to pre-mature engine failure and is a major concern of the automotive industry for vehicles  employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation  and shear stability over previous oil categories.

Product Features:
  • Outstanding thermal and oxidation stability
  • Excellent sludge and varnish protection
  • Faster oil flow at start-up
  • Volatility: lowers oil vaporization and consumption at extreme conditions
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Ultimate engine protection: FRAM Full Synthetic Oil 10W30 1 QT is specifically formulated with high-quality synthetic base stocks and advanced additive technology to provide the ultimate protection for your engine, ensuring its longevity and performance.
See More

FRAM – 5 Qt Engine Oil High Milage Conventional 5W30 Restores Seals to Reduce Oil Consumption (Part No.F660-5QT)

5 Qt Engine Oil High Milage Conventional 5W30 Restores Seals to Reduce Oil Consumption

from

$25.99
FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 5W30 grades will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:
  • Formulated with a unique combination of premium base oils and an enhanced additive system
  • Provides increased protection in higher mileage engines
  • Helps restore seal condition to reduce oil consumption
  • Increases protection against high temperature deposits and ring sticking
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.
See More

Castrol – Conventional 30W Engine Oil – Protects against thermal breakdown – 1 Qt (Part No.151B00)

Conventional 30W Engine Oil - Protects against thermal breakdown - 1 Qt

from

$8.49
Castrol Conventional 30W Engine Oil is a high-quality monograde oil that provides maximum engine wear protection. It contains dispersants, antioxidants, detergents, and other additives that help to keep the engine clean and running smoothly. This heavy-duty formula is engineered to provide greater protection against thermal breakdown, which can cause engine damage and reduce performance. Castrol Conventional 30W Engine Oil exceeds all passenger car and light-truck manufacturer’s warranty requirements and is made in the USA. It is an ideal choice for those who want to keep their engines running smoothly and efficiently. Protect your engine against thermal breakdown with Castrol Conventional 30W Engine Oil.

Product Features:
  • Heavy-duty formula provides maximum engine wear protection in warm climates; designed for use in temperatures above 40 Deg. F
  • Contains dispersants, antioxidants, detergents and varnish inhibitors that help prevent ring-sticking and build up of harmful engine deposits
  • Engineered for greater protection against thermal breakdown
  • Exceeds all passenger car and light-truck manufacturers’ warranty requirements for the protection of gasoline and turbocharged engines where api sm, sl, sj or sh is recommended
  • Made in the usa
  • Thermal Protection: GTX Engine Oil, SAE 30 provides superior protection against thermal breakdown, ensuring your engine stays cool and running smoothly.
See More

FRAM – Full Synthetic High Mileage 5W-30 Engine Oil: 5 Quart (Part No.F933-5QT)

Full Synthetic High Mileage 5W-30 Engine Oil: 5 Quart

from

$28.99
FRAM Full Synthetic High Mileage SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Reduces oil cumsumption
  • Excellent sludge and varnish protection
  • Slows engine leaks
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
See More

Castrol – GTX Conventional 10W-40 Motor Oil: Helps Protect Against Sludge Build Up, 1 Quart (Part No.14CD5A)

GTX Conventional 10W-40 Motor Oil: Helps Protect Against Sludge Build Up, 1 Quart

from

$9.99
Castrol® GTX® is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It continues to innovate to meet the needs of consumers and vehicle manufacturers and remains among the most trusted brands today. Severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals can all cause the build-up of a thick, tar like substance called sludge. If not addressed, it can rob a car’s engine of its power and ultimately its life. GTX is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards.

Product Features:
  • Premium quality base oils and anti-wear additives to help extend the life of your engine
  • Advanced protection against viscosity and thermal breakdown
  • Superior protection against engine sludge (when tested in engines with a high level of sludge)
  • Helps minimize oil consumption
  • Meets ILSAC GF-6 specs
  • Engine Life Extension: Castrol« GTX« has been helping to extend engine life for over 50 years, making it one of the most trusted motor oil brands today.
  • Conventional Oil Composition: As a premium conventional motor oil, Castrol« GTX« meets the needs of both consumers and vehicle manufacturers.
  • Superior Performance: Exceeds tough industry standards by protecting against new oil splatter formation, ensuring optimal engine performance.
  • Versatile SAE Weight: With an SAE oil weight of 10W-40, Castrol« GTX« is suitable for a wide range of vehicles, providing reliable protection and performance.
See More

Valvoline – Advanced Full Synthetic 10W-30 Motor Oil: Maximizes Engine Life, 1 Quart (Part No.VV935)

Advanced Full Synthetic 10W-30 Motor Oil: Maximizes Engine Life, 1 Quart

from

$11.49
Today’s advanced engine technology requires advanced protection. Valvoline Advanced Full Synthetic, the motor oil designed to protect today’s sophisticated engines, contains premium anti-wear additives, superior antioxidants and extra detergents. It protects 40% better against wear, resists oil breakdown 10-times better, and defends 25% more against deposits than industry standards for maximum performance and engine longevity. And with an exceptional range of temperature protection your engine will ready for extreme weather. Valvoline invented motor oil 150 years ago, and we’ve been reinventing it ever since. Get Valvoline Advanced Full Synthetic and give your engine the advanced protection proven to maximize engine life.

Product Features:
  • ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
  • 40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
  • 25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
  • EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
  • MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
  • Enhanced Oil Stability: This motor oil resists oil breakdown 10 times better than industry standards, providing consistent performance and reliability.
  • Premium Additives: Contains premium anti-wear additives, superior antioxidants, and extra detergents to maintain engine health and efficiency.
See More

FRAM – Straight-Viscosity 30W Conventional Engine Oil, Reduces Engine Wear, 1 Quart (Part No.F530)

Straight-Viscosity 30W Conventional Engine Oil, Reduces Engine Wear, 1 Quart

from

$6.49
FRAM Engine Oil SAE 30 is single grade or straight-viscosity motor oil that meets the stringent API SP, SN Plus / SN, SM, SL & CF specifications. It contains a balanced blend of high VI base stocks and an advanced additive package to deliver superior performance. It is designed to provide thermal and oxidation stability, deposit control, anti-wear protection, corrosion protection and improved pumpability. FRAM Engine Oil SAE 30 may be used in turbo-charged or naturally aspirated foreign and domestic engines recommending straight weight API SP/CF quality oil. This motor oil exceeds the stringent lubricating performance requirements of American, European, Korean, Japanese and other worldwide engine manufacturers where straight weight engine oil is recommended.

Product Features:
  • Resists breakdown in severe engine environments
  • Effectively prevents the formation of sludge and varnish deposits
  • Reduces engine wear
  • Turbo approved
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Superior Performance: FRAM Engine Oil SAE 30 is formulated with a balanced blend of high VI base stocks and advanced additives to deliver superior performance, ensuring your engine runs smoothly and efficiently.
See More

FRAM – 10W-30 High Mileage Full Synthetic Engine Oil: 1 Quart (Part No.F943)

10W-30 High Mileage Full Synthetic Engine Oil: 1 Quart

from

$7.99
FRAM Full Synthetic High Mileage SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 10W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 10W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Reduces oil cumsumption
  • Excellent sludge and varnish protection
  • Slows engine leaks
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
See More

Castrol – EDGE Euro Car 5W-30 C3 Full Synthetic Engine Oil 1 Quart (Part No.154BC4)

EDGE Euro Car 5W-30 C3 Full Synthetic Engine Oil 1 Quart

from

$12.49
CASTROL EDGE Euro Car 5W-30 C3 Full Synthetic Motor Oil is a high-performance engine oil that is designed to provide superior protection to the latest technology, high output engines that operate at extreme temperatures. This full-synthetic motor oil is formulated to transform under pressure, increasing film strength to prevent oil breakdown and reduce friction to unlock maximum performance. It is optimized to deliver 40% better performance than other motor oils and is recommended by world-leading auto manufacturers. This motor oil provides engine protection for the entire drain interval and meets API CF/SN, ACEA A3/B4, ACEA C3, GM dexos2 specifications. It is suitable for European OEM diesel specifications for Mercedes-Benz and VW/Audi. This motor oil was formerly known as Castrol SLX and is available in a 1-quart container.

Product Features:
  • Optimized to deliver 40% better performance than required by acea standards
  • Recommended by world leading auto manufacturers
  • Engine protection for the entire drain interval even under extreme pressure of high output engines
  • Meets api cf/sn, acea a3/b4, acea c3, gm dexos2, mb approval 229.31/229.51, vw 505 00/505 01, renault rn 0700/0710
  • Formerly known as castrol slx
  • Syntec Power Technology: The reformulated EDGE Engine Oil now features Syntec Power Technology, which enhances its performance even further.
See More

Castrol – EDGE High Mileage 10W-30 Advanced Full Synthetic Engine Oil: 5 Qt (Part No.15906F)

EDGE High Mileage 10W-30 Advanced Full Synthetic Engine Oil: 5 Qt

from

$38.99
Castrol EDGE High Mileage with Fluid TITANIUM Technology is the natural choice for drivers who demand maximum performance from their high mileage cars, which often operate at extreme temperatures. Castrol EDGE High Mileage provides up to 10X better high temperature performance than the latest industry standard to ensure optimal protection and oil flow over the drive cycle. As your car ages, it can lose performance and efficiency and is also more prone to catalytic converter failure. Castrol EDGE High Mileage is liquid engineered with Phosphorous Replacement Technology to reduce harmful phosphorus to protect the catalytic converter and preserve the life of your emission system. Castrol EDGE High Mileage helps your car defy its miles and extend maximum performance.

Product Features:
  • Patented phosphorus replacement technology to help extend the life of your emission system
  • 10x better high temperature performance (as measured in sequence iiih engine test vs. api sp test limit)
  • 6x better wear protection (as measured in latest sequence iva engine test)
  • 1.4x better sludge protection (as measured in sequence vh engine test vs. api sp test limit)
  • Maximum Performance: Castrol EDGE High Mileage Engine Oil is designed to provide maximum performance for high mileage cars that often operate at extreme temperatures.
  • Improved High Temperature Performance: With up to 10X better high temperature performance than the latest industry standard, Castrol EDGE High Mileage Engine Oil ensures optimal protection and oil flow over the drive cycle.
See More

FRAM – 10W-30 Full Synthetic Motor Oil, Ultimate Protection, 5 Quarts (Part No.F940-5QT)

10W-30 Full Synthetic Motor Oil, Ultimate Protection, 5 Quarts

from

$27.99
FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high  quality synthetic base stocks and the latest additive technology to provide the ultimate protection  for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI)  and turbo gas-direct engine (TGDI) designs as well as providing increased protection for  carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30  contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead  to pre-mature engine failure and is a major concern of the automotive industry for vehicles  employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation  and shear stability over previous oil categories.

Product Features:
  • Outstanding thermal and oxidation stability
  • Excellent sludge and varnish protection
  • Faster oil flow at start-up
  • Volatility: Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 10W-30 is formulated with high-quality synthetic base stocks and the latest additive technology to provide the ultimate protection for your engine.
  • Advanced LSPI Prevention: Contains additive technology specifically designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines.
  • Enhanced Wear Protection: Offers increased wear protection, ensuring your engine components remain in optimal condition even under rigorous driving conditions.
  • Versatile Engine Compatibility: Suitable for a wide range of engines, including GDI, TGDI, carbureted, and normally fuel-injected engines, making it a versatile choice for various vehicle types.
See More

Castrol – EDGE High Mileage 5W-30 Advanced Full Synthetic Engine Oil: 5 Qt (Part No.15906E)

EDGE High Mileage 5W-30 Advanced Full Synthetic Engine Oil: 5 Qt

from

$38.99
Castrol EDGE High Mileage with Fluid TITANIUM Technology is the natural choice for drivers who demand maximum performance from their high mileage cars, which often operate at extreme temperatures. Castrol EDGE High Mileage provides up to 10X better high temperature performance than the latest industry standard to ensure optimal protection and oil flow over the drive cycle. As your car ages, it can lose performance and efficiency and is also more prone to catalytic converter failure. Castrol EDGE High Mileage is liquid engineered with Phosphorous Replacement Technology to reduce harmful phosphorus to protect the catalytic converter and preserve the life of your emission system. Castrol EDGE High Mileage helps your car defy its miles and extend maximum performance.

Product Features:
  • Patented phosphorus replacement technology to help extend the life of your emission system
  • 10x better high temperature performance (as measured in sequence iiih engine test vs. api sp test limit)
  • 6x better wear protection (as measured in latest sequence iva engine test)
  • 1.4x better sludge protection (as measured in sequence vh engine test vs. api sp test limit)
  • Maximum Performance: Castrol EDGE High Mileage with Fluid TITANIUM Technology is designed to provide maximum performance for high mileage cars, even in extreme temperatures.
  • Protects Catalytic Converter: Castrol EDGE High Mileage is liquid engineered with Phosphorous Replacement Technology to reduce harmful phosphorus, protecting the catalytic converter and preserving the life of your emission system.
See More

1980 Chrysler Newport Motor Oil

Maybe you’re in the middle of a full rebuild of that 1980 Chrysler Newport. Maybe you just need a couple of Motor Oil. Either way, Advance Auto Parts has 58 different Motor Oil in our inventory ranging from $6.49 to $38.99. That means you can find the exact parts or products you need to keep that 1980 Chrysler Newport running smoothly.

Motor Oil are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 1980 Chrysler Newport. Castrol, Fram, and Valvoline are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Motor Oil for your 1980 Chrysler Newport, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 27,544 reviews in this category, some of the top rated parts include Advanced Full Synthetic 10W-30 Motor Oil: Maximizes Engine Life, 1 Quart with 4.9 stars and EDGE 5W-30 Advanced Full Synthetic Motor Oil: 1 Quart with 4.9 stars.

So if you’re in the market for aftermarket Motor Oil to keep your 1980 Chrysler Newport rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Motor Oil Brands To Make Your 1980 Chrysler Newport Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1980 Chrysler Newport demands trusted brand parts and products to keep it running. Many trusted brands of Motor Oil make up Advance Auto Parts’ inventory, and all are ready to help make your Newport the best it can be. Be sure to browse some of our top Motor Oil brands and parts.

Popular Valvoline Motor Oil

We carry Valvoline parts in our stock across Engine Oil categories, plus more. For a 1980 Chrysler Newport, our most popular Valvoline Motor Oil include:

FAQs for 1980 Chrysler Newport Motor Oil

What are the most purchased Motor Oil for the 1980 Chrysler Newport?

Out of 58 Motor Oil for the 1980 Chrysler Newport, the most popular in our inventory are:
Full Synthetic 5W-30 Dexos1 Gen 3 Engine Oil: 5 Quart
from $27.99
This product is not rated
Full Synthetic 5W-30 Dexos1 Gen 3 Engine Oil: 5 Quart
Engine Oil

What are the top-rated 1980 Chrysler Newport Motor Oil?

Top-rated Motor Oil for your 1980 Chrysler Newport based on customer reviews/ratings are:
Advanced Full Synthetic 10W-30 Motor Oil: Maximizes Engine Life, 1 Quart
from $11.49
(690)
Advanced Full Synthetic 10W-30 Motor Oil: Maximizes Engine Life, 1 Quart
“I have always used Valvoline oil with very good luck so to find it at a very good price that’s great.”
EDGE 5W-30 Advanced Full Synthetic Motor Oil: 1 Quart
from $11.99
(442)
EDGE 5W-30 Advanced Full Synthetic Motor Oil: 1 Quart
“all my cars”