1980 Cadillac Eldorado Performance and Racing Products
Find Your Specific 1980 Cadillac Eldorado Performance and Racing Products
Below you will find various in-demand Cadillac Performance and Racing Products, components and accessories for your 1980 Eldorado. Advance Auto Parts has popular Eldorado parts like Performance Engines, Performance Air Filters, Performance Distributors and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Eldorado model years including
1991,
1992,
1993,
1994,
1995,
1996,
1997,
1998,
1999 and more. Select a category of 1980 Cadillac Eldorado Performance and Racing Products below and start saving instantly.
Popular 1980 Cadillac Eldorado Performance and Racing Products Categories
Essential Performance and Racing Products for 1980 Cadillac Eldorados
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
B & M – Transkit For 65-87 TH400 Transmission (Part No.20229)
from
$511.99
A B&M transmission in a box! Transform your automatic transmission into a full-tilt B&M performer! This is our ultimate transmission kit – it comes complete with full instructions on how to assemble your transmission to B&M specifications.
Product Features:
See More
Product Features:
- High Perf. Friction Materials
- Complete Overhaul Gasket Set
- Modification Components
- Replacement Valves
- Replacement Springs
- Drain Plug Kit Included
Mr. Gasket – Alternator: Remanufactured, 80 Amps (Part No.5122)
from
$318.99
The Mr. Gasket chrome alternator is a high-performance, remanufactured solution designed to exceed original equipment specifications, ensuring maximum dependability for your vehicle. With an 80-amp output and a sleek chrome-plated finish, this GM 10SI style alternator is both functional and visually appealing. It fits most 1973-1983 GM vehicles, making it a versatile replacement option. The alternator features a 6.6″ bolt spacing, an internal regulator for efficient voltage control, and a 1-groove V-belt pulley included for easy installation. Operating at 12 volts, it can be used as a direct OE replacement or as a 1-wire alternator, offering flexibility to suit your needs. Built for durability and reliability, this alternator is an excellent choice for restoring or upgrading your vehicle’s electrical system.
Product Features:
See More
Product Features:
- Fits Most 1973-1983 GM Vehicles
- Bolt Spacing 6.6″
- 80 Amps
- GM 10SI Style Alternator
- Chrome Plated Finish
- 1-Groove V-belt pulley – included
- Internal Regulator
Spectre – Timing Cover Comp Kit (Part No.42353)
from
$25.99
Spectre’s Chevy short block timing chain cover kit is designed to protect engine components like timing gears and the timing chain. This kit features a triple chrome plated steel construction and includes a pre-installed seal, base gasket, (10) 12-point screws and a 12 point socket. This timing cover kit is engineered for optimum fit and function and it is designed to fit Chevy 265-400 short block engines.
Product Features:
See More
Product Features:
- Fits Small Black Chevrolet 265-400 Engines
- Triple chrome plated
- Steel construction
- Includes pre-installed seal, gasket, (10) 12-point bolts and a 12 point socket
- OEM fit & function
- Spectre timing tab 4236 or 4237 is recommended
PerTronix – D9001 Flame-Thrower Hei Distributor Advance Curve Kit (Part No.D9001)
from
$28.99
Flame Thrower Street/Strip distributors have a speciallFlame-Thrower Street/Strip distributors have a specially designed HEI distributor module and coil combination which operates without misfire beyond 7500 RPM. That’s nearly 3000 RPM higher than most stock HEI Distributors. Race HEI Distributors feature an electronic HEI Distributor module and 50,000 volt coil combination that optimizes spark energy and peak current to the spark plug in the 6000 to 8500 RPM range.y designed module and coil combination which operates without misfire beyond 7500 RPM
Product Features:
See More
Product Features:
- Precision machined chromoly weights and center plate.
- Designed to eliminate erratic timing.
- Includes three sets of springs.
- Complete installation instructions make recurving your distributor easy.
Spectre – Spectre Replacement Air Filter (Part No.HPR0136)
from
$31.99
This Spectre OEM replacement air filter is an easy to install performance option for multiple Buick, Cadillac, Chevy, GM, Mercedes, Oldsmobile and Pontiac applications that use a 14 inch by 3 inch round air filter. With its performance synthetic air filter media, this air filter has been designed to add horsepower and quicker acceleration by allowing more air flow into your engine than ordinary paper filters. This air filter’s sealing edge was engineered to insure a proper air cleaner housing seal for great engine protection.
Product Features:
See More
Product Features:
- Replacement for 14 inch by 3 inch round air filter
- Fits perfectly in your vehicle’s air box as a replacement for your factory air filter
- Engineered for increased flow and greater performance
- Fits select Buick, Cadillac, Chevy, GM, Mercedes, Oldsmobile and Pontiac models
- Factory pre-oiled and ready to use
- Simple installation
Mr. Gasket – Alternator Bracket (Part No.9850)
from
$26.99
Hold your alternator securely in place with Mr. Gasket chrome alternator bracket. Chrome plated heavy gauge steel for long lasting good looks. Must be used with #9852.
Product Features:
See More
Product Features:
- Chrome Plated Steel
- F-Style
- Heavy Gauge Steel Construction
- Fits Small Block Chevy 265-400 CID
- Must Be Used With Part 9852
Accel – 8Mm Super Stock Graphite Cust (Part No.4053)
from
$81.99
These ACCEL Super Stock wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with zinc-plated steel terminals.
Product Features:
See More
Product Features:
- Graphite supression eliminates RFI/EMI
- 3,000 to 7,000 ohms per foot of resistance
- Silicone Spark Plug Boots
- 450 Degree Temperature Rating
Mr. Gasket – Ultra Seal: Harmonic Balancer Bolt/Washer Kit (Part No.7845)
from
$32.49
Secure the harmonic balancer or dampener on your Chevy. Works on original equipment, high performance street, drag or circle track applications. Features a heat treated black oxide coated Grade 8 alloy steel bolt for strength with a tall hex head to prevent wrench from slipping. An extra thick parallel ground washer provides accurate, uniform torque, and a lock washer is also included.
Product Features:
See More
Product Features:
- Heat treated black oxide coated Grade 8 alloy steel
- Tall hex head bolt to prevent wrench from slipping
- Extra thick parallel ground washer provides accurate, uniform torque
- Washers Provides More Accurate And Uniform Torque
- Grade 8 Alloy Steel
MSD Ignition – Distributor Cap; GM HEI; Red (Part No.8411)
from
$54.99
The cap of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap. To make things easy, we now offer these caps as replacement kits.
Product Features:
See More
Product Features:
- Stock GM HEI replacement distributor cap
- Red
Edelbrock – Water Pump Cartridge for Small-Block Chevy (Race Style) (Part No.8827)
from
$457.99
Edelbrock #8827 Water Pump small block Chevy cartridge style race ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “super cooling
Product Features:
See More
Product Features:
- Standard Impeller Rotation
- 0.750 in. Pilot Shaft
- 0.750 in. Ball/Ball Bearing
- 5.8125 in. Block To Hub Height
- Satin Finish
Accel – Ignition/Electrical (Part No.130120)
from
$17.49
ACCEL Hi-Performance rotors offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability and resist centrifugal forces at high racing RPMs.
Product Features:
See More
Product Features:
- Max stability for all RPM ranges
- Heavy duty for maximum energy transfer
Mr. Gasket – High Performance Thermostat (Part No.4365)
from
$32.49
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 195 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Spectre – Valve Cover 3 Hole SBC (Part No.5258)
from
$54.99
Available in various sizes, heights, and finishes, Spectre offers a wide variety of high performance valve covers designed to easily replace your stock covers. Designed for 1958-1986 Chevrolet Small Block 265-400 engines, this 3-hole valve cover features chrome-plated steel construction and a smooth design. Sold in pairs, this stock profile cover is baffled to provide optimum function. With show quality construction and a sealing edge designed for an ideal fit, our valve covers are engineered to look great for applications ranging from custom builds to replacing stock equipment.
Product Features:
See More
Product Features:
- Designed for 1958-1986 Chevrolet Small Block 265-400 engines
- Baffled for breather system compatibility
- Sold in pairs
- Triple chrome-plated steel construction
- Stock height
- Features OEM style sealing edge
FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1000)
from
$61.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Ultra Seal: Head Gasket (Part No.5799G)
from
$81.99
Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.
Product Features:
See More
Product Features:
- Five layer (graphite core/perforated steel outer layers) composite construction
- Graphite core is excellent transfering heat away from hot spots in head preventing gasket burn-out.
- Provides excellent stability, compressibility and high temperature endurance
- Coated with high temperature silicone to ensure sealing of engine fluids
- Will not brinell (indent) aluminum cylinder heads
- For high performance street, drag race and oval track use
- Compatible w/High Octane Fuel
- Compatible With Exotic Fuel
B & M – Transpak For 65-87 TH400 Transmission (Part No.20228)
from
$166.99
The B&M Transpak has all the features in the Shift Improver Kit, plus it provides additional driver manual control. Retain full automatic features and standard shift points with selector in Drive.
Product Features:
See More
Product Features:
- Recalibrate Auto. Transmission
- Optimum Performance
- Select Your App. Mode
- Improves Transmission Life
- Trans. Removal Not Required
- Downshift At Any Speed
- Great For Trailer Towing
- For Heavy Loads Driving Downhill
Spectre – Bolt Kit Intake Hex Head (Part No.4652)
from
$10.99
Spectre’s Intake Bolt and Washer Set is engineered to provide premium quality hardware for Chevrolet 265-400 and Chrysler 273-440 small block engines. Measuring 3/8 inch-16 by 1 inch, these grade 5 bolts feature a corrosion resistant zinc-plated finish and hex heads to ensure easy installation. This kit includes 12 bolts and washers.
Product Features:
See More
Product Features:
- Designed for Chevrolet 265-400 and Chrysler 273-440 small block engines
- 3/8 inch-16 by 1 inch bolts
- Kit includes 12 bolts and washers
- Manufactured from high quality steel
- Bolts feature hex heads
Spectre – Water Neck; Olds (Part No.4733)
from
$26.99
Spectre’s Oldsmobile V8 water neck fits Oldsmobile 330, 350, 425 and 455 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck has an additional by-pass hose connection and includes the bolts.
Product Features:
See More
Product Features:
- Fits Oldsmobile 330, 350, 425 and 455 engines
- Chrome plated
- Bolts included
- Designed for OEM fit
- Easy to install
- O-ring/gasket not included
Mr. Gasket – Water Neck (Part No.2557)
from
$32.49
Precision die cast, these water necks are first polished to a high luster, then chrome plated. Features an O-ring style seal to prevent water leaks. Comes with O-ring gasket and mounting bolts.
Product Features:
See More
Product Features:
- Complete with o-rings and mounting bolts
- Features an o-ring style seal to prevent water leaks
- Chrome plated
- 1/2″ NPT port can be used for various coolant temp related sensors or switches
Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)
from
$6.29
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Upgrade your 1980 Cadillac Eldorado with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1980 Cadillac Eldorado, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Cadillac or enhancing its overall performance, Performance and Racing Products are key to keeping your Eldorado functioning at its best. At Advance Auto Parts, we offer a wide selection of 49 Performance and Racing Products for the 1980 Cadillac Eldorado, designed to meet your needs without breaking the bank.
From
Performance Engine
replacements to
Performance Air Filters
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1980 Cadillac Eldorado at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $5.99 to $519.99, with
an average price of $121.98.
Our 49 Performance and Racing Products in stock come from 10 trusted brands, so you’re sure to find the right part for your 1980 Cadillac Eldorado without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1980 Cadillac Eldorado, we stock popular OEM and aftermarket Performance and Racing Products from top names
like PerTronix, Energy Suspension, Accel, and more.
PerTronix Performance and Racing Products
start at just $28.99 and boast an impressive 4.4 stars average rating from customers.
Energy Suspension and Accel also bring quality to the table, with Performance and Racing Products available starting at $5.99, and at an average 4.4 stars rating.
With 50 customer reviews and counting, our 1980 Cadillac Eldorado Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1980 Cadillac Eldorado is always ready to roll. We’re committed to providing you with everything you need to keep your Eldorado in top shape, all in one place.
Start shopping confidently below for your 1980 Cadillac Eldorado!
Best-Selling Performance Engines for 1980 Cadillac Eldorados
Enhance the driving experience in your Cadillac with 29 quality Performance Engine components, starting at $10.99.
Spectre – Bolt Kit Intake Hex Head (Part No.4652)
from
$10.99
Spectre’s Intake Bolt and Washer Set is engineered to provide premium quality hardware for Chevrolet 265-400 and Chrysler 273-440 small block engines. Measuring 3/8 inch-16 by 1 inch, these grade 5 bolts feature a corrosion resistant zinc-plated finish and hex heads to ensure easy installation. This kit includes 12 bolts and washers.
Product Features:
See More
Product Features:
- Designed for Chevrolet 265-400 and Chrysler 273-440 small block engines
- 3/8 inch-16 by 1 inch bolts
- Kit includes 12 bolts and washers
- Manufactured from high quality steel
- Bolts feature hex heads
Mr. Gasket – High Performance Thermostat (Part No.4365)
from
$32.49
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 195 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Spectre – Water Neck; Olds (Part No.4733)
from
$26.99
Spectre’s Oldsmobile V8 water neck fits Oldsmobile 330, 350, 425 and 455 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck has an additional by-pass hose connection and includes the bolts.
Product Features:
See More
Product Features:
- Fits Oldsmobile 330, 350, 425 and 455 engines
- Chrome plated
- Bolts included
- Designed for OEM fit
- Easy to install
- O-ring/gasket not included
Mr. Gasket – Ultra Seal: Harmonic Balancer Bolt/Washer Kit (Part No.7845)
from
$32.49
Secure the harmonic balancer or dampener on your Chevy. Works on original equipment, high performance street, drag or circle track applications. Features a heat treated black oxide coated Grade 8 alloy steel bolt for strength with a tall hex head to prevent wrench from slipping. An extra thick parallel ground washer provides accurate, uniform torque, and a lock washer is also included.
Product Features:
See More
Product Features:
- Heat treated black oxide coated Grade 8 alloy steel
- Tall hex head bolt to prevent wrench from slipping
- Extra thick parallel ground washer provides accurate, uniform torque
- Washers Provides More Accurate And Uniform Torque
- Grade 8 Alloy Steel
Mr. Gasket – Ultra Seal: Head Gasket (Part No.5799G)
from
$81.99
Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.brbrGasket Bore 4.130 inch, Compressed thickness 0.055 inch
Product Features:
See More
Product Features:
- Five layer (graphite core/perforated steel outer layers) composite construction
- Graphite core is excellent transfering heat away from hot spots in head preventing gasket burn-out.
- Provides excellent stability, compressibility and high temperature endurance
- Coated with high temperature silicone to ensure sealing of engine fluids
- Will not brinell (indent) aluminum cylinder heads
- For high performance street, drag race and oval track use
- Compatible w/High Octane Fuel
- Compatible With Exotic Fuel
Competition Cams – ENGINE ROCKER ARM (Part No.1602-16)
from
$519.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1601-16)
from
$519.99
ENGINE ROCKER ARM
Edelbrock – Water Pump Cartridge for Small-Block Chevy (Race Style) (Part No.8827)
from
$457.99
Edelbrock #8827 Water Pump small block Chevy cartridge style race ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “super cooling
Product Features:
See More
Product Features:
- Standard Impeller Rotation
- 0.750 in. Pilot Shaft
- 0.750 in. Ball/Ball Bearing
- 5.8125 in. Block To Hub Height
- Satin Finish
Competition Cams – ENGINE ROCKER ARM (Part No.1608-8)
from
$283.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1610-8)
from
$283.99
ENGINE ROCKER ARM
Competition Cams – ROCKER ARMS, CS 1.52 (Part No.1604-8)
from
$283.99
ROCKER ARMS, CS 1.52
Competition Cams – ENGINE ROCKER ARM (Part No.17005-16)
from
$277.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1607-8)
from
$277.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1609-8)
from
$277.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.17004-16)
from
$277.99
ENGINE ROCKER ARM
Competition Cams – HIGH ENERGY ALUM ROC (Part No.17005-8)
from
$148.99
HIGH ENERGY ALUM ROC
Competition Cams – ENGINE ROCKER ARM (Part No.1806-1)
from
$66.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1807-1)
from
$61.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1801-1)
from
$61.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1802-1)
from
$61.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1605-1)
from
$51.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1608-1)
from
$51.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1610-1)
from
$51.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1601-1)
from
$50.99
ENGINE ROCKER ARM
Most Popular 1980 Cadillac Eldorado Performance Air Filters
Customize your Cadillac with 2 Performance Air Filters products
like Performance Air Filters, all
priced under $83.99.
K&N – Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance (Part No.E-1650)
from
$83.99
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N’s No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!
Product Features:
See More
Product Features:
- REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
- CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
- RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
- REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills
- ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
- EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
- 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
- ULTIMATE LONGEVITY: No-hassle lifetime limited warranty on stock replacement K&N air filters- limitations apply
Spectre – Spectre Replacement Air Filter (Part No.HPR0136)
from
$31.99
This Spectre OEM replacement air filter is an easy to install performance option for multiple Buick, Cadillac, Chevy, GM, Mercedes, Oldsmobile and Pontiac applications that use a 14 inch by 3 inch round air filter. With its performance synthetic air filter media, this air filter has been designed to add horsepower and quicker acceleration by allowing more air flow into your engine than ordinary paper filters. This air filter’s sealing edge was engineered to insure a proper air cleaner housing seal for great engine protection.
Product Features:
See More
Product Features:
- Replacement for 14 inch by 3 inch round air filter
- Fits perfectly in your vehicle’s air box as a replacement for your factory air filter
- Engineered for increased flow and greater performance
- Fits select Buick, Cadillac, Chevy, GM, Mercedes, Oldsmobile and Pontiac models
- Factory pre-oiled and ready to use
- Simple installation
Top Picks for 1980 Cadillac Eldorado Performance Distributors
Upgrade Cadillac Eldorados with top-quality Performance Distributors parts, including 4 OEM and aftermarket selections for your 1980 model.
PerTronix – D9001 Flame-Thrower Hei Distributor Advance Curve Kit (Part No.D9001)
from
$28.99
Flame Thrower Street/Strip distributors have a speciallFlame-Thrower Street/Strip distributors have a specially designed HEI distributor module and coil combination which operates without misfire beyond 7500 RPM. That’s nearly 3000 RPM higher than most stock HEI Distributors. Race HEI Distributors feature an electronic HEI Distributor module and 50,000 volt coil combination that optimizes spark energy and peak current to the spark plug in the 6000 to 8500 RPM range.y designed module and coil combination which operates without misfire beyond 7500 RPM
Product Features:
See More
Product Features:
- Precision machined chromoly weights and center plate.
- Designed to eliminate erratic timing.
- Includes three sets of springs.
- Complete installation instructions make recurving your distributor easy.
MSD Ignition – Distributor Cap; GM HEI; Red (Part No.8411)
from
$54.99
The cap of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap. To make things easy, we now offer these caps as replacement kits.
Product Features:
See More
Product Features:
- Stock GM HEI replacement distributor cap
- Red
PerTronix – D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor (Part No.D9007)
from
$33.99
Flame Thrower Street/Strip distributors have a speciallFlame-Thrower Street/Strip distributors have a specially designed HEI distributor module and coil combination which operates without misfire beyond 7500 RPM. That’s nearly 3000 RPM higher than most stock HEI Distributors. Race HEI Distributors feature an electronic HEI Distributor module and 50,000 volt coil combination that optimizes spark energy and peak current to the spark plug in the 6000 to 8500 RPM range.y designed module and coil combination which operates without misfire beyond 7500 RPM
Product Features:
See More
Product Features:
- Premium quality wire harness and capacitor.
- Insure good connection and “static free” operation.
Accel – Ignition/Electrical (Part No.130120)
from
$17.49
ACCEL Hi-Performance rotors offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability and resist centrifugal forces at high racing RPMs.
Product Features:
See More
Product Features:
- Max stability for all RPM ranges
- Heavy duty for maximum energy transfer
In-Demand Performance Exhaust Products for 1980 Cadillac Eldorados
Select from 1 premium Performance Exhaust Products parts for your 1980 Cadillac Eldorado.
Spectre – Alternator Bracket Kit 69-86 Chevy (Part No.47293)
from
$42.99
This Spectre Alternator Bracket Kit was designed for 1969-1986 Chevrolet Small Block engines with a long water pump. This triple chrome-plated kit includes two brackets and the hardware needed to mount your alternator in a clean and professional way.
Product Features:
See More
Product Features:
- Designed for ’69-’86 Chevrolet Small Block engines with long water pump
- Kit includes two brackets and mounting hardware
- Triple chrome plated
- Manufactured with high quality materials
Most Sold 1980 Cadillac Eldorado Performance Ignition Products
Explore our best-selling Cadillac parts for the 1980 Eldorado among 4 OEM and aftermarket options starting from $70.99.
Accel – High Energy Ignition Coil for GM HEI – 1973-1991 (Part No.140003)
from
$102.99
Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Standard Motor Products SMP Dr-31
- MSD 8225
Accel – GM Hei Supercoil Red/White (Part No.140005)
from
$126.99
Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Similar to Standard Motor Products SMP Dr-32
- Long Life And Great Looks
Accel – 8Mm Super Stock Graphite Cust (Part No.4053)
from
$81.99
These ACCEL Super Stock wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with zinc-plated steel terminals.
Product Features:
See More
Product Features:
- Graphite supression eliminates RFI/EMI
- 3,000 to 7,000 ohms per foot of resistance
- Silicone Spark Plug Boots
- 450 Degree Temperature Rating
MSD Ignition – Mod HEI Dust Cover, V8 & Odd Fire V6 (Part No.8401)
from
$70.99
Stock style replacement modified HEI coil dust cover. Used on 8 cylinder vehicles only.
Product Features:
See More
Product Features:
- Externally mounted coil
- Increases reliability
- Increase performance
- High quality plastic
- Resist spark loss
- Use brass conductors
- Low resistance connections
- No modifications
Top-Rated Performance and Racing Products Brands For Your 1980 Cadillac Eldorado
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1980 Cadillac Eldorados. Below you’ll find some of our best rated Performance and Racing Products from PerTronix, Energy Suspension, and Accel, and more. Performance and Racing Products from these brands that fit a 1980 Eldorado start at just $5.99 and are rated as high as 4.4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular PerTronix 1980 Cadillac Eldorado Performance and Racing Products
When it comes to maintaining or upgrading your 1980 Cadillac Eldorado, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. PerTronix ticks all of those boxes. We offer a wide selection of PerTronix Performance and Racing Products, specifically designed for the 1980 Cadillac Eldorado. With over 2 PerTronix brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $28.99, with an average price of just $31.49. Plus, with over 2 customer reviews and an average rating of 4.4 stars, you can trust that our PerTronix Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$28.99
(1)
D9001 Flame-Thrower Hei Distributor Advance Curve Kit
“This is a good product for a reasonable price”
from
$33.99
(1)
D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor
“Works well, good quality harness!”
Popular Energy Suspension 1980 Cadillac Eldorado Performance and Racing Products
Energy Suspension auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1980 Cadillac Eldorado owner should feel confident when installing genuine Energy Suspension parts in their vehicle. To ensure the best fit and performance for your 1980 Eldorado, Advance Auto Parts carries a full inventory of 1 Energy Suspension Performance and Racing Products. Plus you will be keeping your Cadillac in peak condition while saving money because prices on these Energy Suspension Performance and Racing Products range up to $5.99, plus, with more than 3 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$5.99
(3)
Tie Rod Dust Boot
“Replaced the old torn boot and added a bit of color for a low cost.”
FAQs for 1980 Cadillac Eldorado Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1980 Cadillac Eldorados?
Out of 49 Performance and Racing Products that fit 1980 Cadillac Eldorados, the following parts are the top sellers:
- Tie Rod Dust Boot (17360821) – $5.99
- Tie Rod Dust Boot (17360833) – $5.99
- Bolt Kit Intake Hex Head (22905656) – $10.99
What’s the price range for 1980 Cadillac Eldorado Performance and Racing Products?
Performance and Racing Product prices for the 1980 Cadillac Eldorado start at $5.99 and go up to $519.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1980 Cadillac Eldorado?
The average price for Performance and Racing Products for the 1980 Cadillac Eldorado is $121.98. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Cadillac Eldorado model years?
What are the cheapest Performance and Racing Products for my 1980 Cadillac Eldorado?
The cheapest 1980 Cadillac Eldorado Performance and Racing Products we carry in stock are:
- Tie Rod Dust Boot (17360821) – $5.99
- Tie Rod Dust Boot (17360833) – $5.99
- Tie Rod Dust Boot (22906873) – $6.29
- Bolt Kit Intake Hex Head (22905656) – $10.99
- Ultra Seal; Timing Cover Bolts (17360380) – $15.79
What are the top-rated Performance and Racing Products that fit the 1980 Cadillac Eldorado?
Out of 50 reviews by customers, our 1980 Cadillac Eldorado Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1980 Cadillac Eldorado and their top-rated products:
- Performance Air Filters
- Performance Steering Products
- Performance Ignition Products
What types of Performance and Racing Products do you sell for my 1980 Cadillac Eldorado?
As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 1980 Cadillac Eldorado:
Can I get help with 1980 Cadillac Eldorado Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Cadillac Performance and Racing Products and more.
What is your return policy for Cadillac Eldorado Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Cadillac Eldorado Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
