1979 Porsche 911 Fuel and Emissions Systems
More 1979 Porsche 911 Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 1979 Porsche 911, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 1979 Porsche 911 Fuel and Emissions Systems
Carquest Premium – Fuel Cap Tester Adapter (Part No.12410)
from
$15.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Carquest Premium – Electric Fuel Pump Inertia Switch (Part No.SBA4426)
from
$84.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Bosch – Fuel Dist Valve Kit (Part No.C20101700156BOS)
from
$306.42
Fuel Dist Valve Kit
Bosch – Bosch Oxygen Sensor (Part No.C5010338551BOS)
from
$140.67
The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- OE Style connectors and wire lengths.
- Base ceramic probe of Zirconium and Yttrium.
- Patented Platinum Power Grid.
DENSO – Oxygen Sensor: 4 Wire, 26.38" Long, Heated, Exact Fit (Part No.234-4911)
from
$128.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Original Equipment – Fuel Tank Body Seal (Part No.E2003947548OEA)
from
$28.91
Fuel Tank Body Seal
Original Equipment – Fuel Injector Holder (Part No.C103067318OEA)
from
$8.60
Fuel Injector Holder
Original Equipment – Original Equipment Air Mass Meter Boot (Part No.B313223229OEA)
from
$173.01
The Original Equipment Air Mass Meter Intake boot is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- Exact Replacement with OE Fittings and Connectors
- Highly Durable and Resistant to Temperatures
- Flexibility and vacuum stability thanks to folds and ribs
- Noise-dampened with specific stiffening
- Integration of pressure and/or temperature sensors
Bosch – Check Valve (Part No.E303027620BOS)
from
$30.66
Bosch is one of the largest global suppliers of automotive products, developing, manufacturing and supplying precision OE components and systems to vehicle manufacturers and the automotive aftermarket.
See More
Bosch – Check Valve (Part No.E303027424BOS)
from
$41.43
Bosch is one of the largest global suppliers of automotive products, developing, manufacturing and supplying precision OE components and systems to vehicle manufacturers and the automotive aftermarket.
See More
Original Equipment – Fuel Pump Mount (Part No.E3020947559OEA)
from
$7.84
Fuel Pump Mount
Bosch – Port Fuel Injector (Part No.C100013508BOS)
from
$69.59
Port Fuel Injection (PFI) is the world’s most widely used system for internal combustion engines and offers many advantages for engines with a low pressure output.
Product Features:
See More
Product Features:
- Low-pressure systems are less complex and more affordable than high-pressure systems
- Robust combustion process tolerates lower-quality fuel
- Maintenance-friendly design reduces the overhead for system diagnostics
Bosch – Port Fuel Injector (Part No.C1000414024BOS)
from
$72.52
Port Fuel Injection (PFI) is the world’s most widely used system for internal combustion engines and offers many advantages for engines with a low pressure output.
Product Features:
See More
Product Features:
- Low-pressure systems are less complex and more affordable than high-pressure systems
- Robust combustion process tolerates lower-quality fuel
- Maintenance-friendly design reduces the overhead for system diagnostics
Bosch – Fuel Injector 62643: New (Part No.62625)
from
$145.99
Bosch Port Fuel Injectors (PFI) have a robust design and are capable of using Ethanol fuel (E100). All Bosch fuel injectors released to the aftermarket are OE fit, form and function, and are produced to OE specifications. The Bosch fuel injector has a return rate of 1 part per million (PPM), making Bosch the industry benchmark. Bosch is a recognized OE leader in fuel systems technology, with more than 45 years of gasoline fuel injection experience. The fuel injection program provides vast coverage for Domestic, European, And Asian vehicles.
Product Features:
See More
Product Features:
- Guaranteed OE fit, form and function
- Manufactured of the highest quality materials
- Provides precision flow and original spray pattern for optimal performance
- Product includes top and bottom mounting o-ring
- Maintains new-car smoothness and drivability
Carquest Premium – Fuel Cap: 10844, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10844)
from
$39.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Fuel Cap (Part No.10826)
from
$11.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Motorad – Tethered Fuel Cap (Part No.MGC826T)
from
$18.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Come pre-assembled for quick and easy installation.
- Several fastener options to work with any fuel cap compartment configuration
- Fits vehicles orginally equipped with tether
- Reduces air pollution with proper sealing and venting
- Manufactured from durable, long-life materials
Dansk – Fuel Tank (Part No.E2000656057DSK)
from
$770.11
Fuel Tank
Dansk – Fuel Tank (Part No.E2000656053DSK)
from
$752.09
Fuel Tank
Bosch – Bosch Fuel Accumulator (Part No.E400013562BOS)
from
$223.40
Bosch is a global leader in the engineering and manufacture of the original equipment Fuel Accumulator for K-JETRONIC fuel injection systems. Starting and running problems occur when the fuel accumulator is defective. All K-JETRONIC fuel injection systems use the fuel accumulator to assist in preventing hot start vapor lock and keeping the pressure and flow in the fuel distributor consistent. The accumulator contains an internal spring-loaded diaphragm that prevents vapor lock by keeping the system pressurized after the engine has been shut off. If the K-JETRONIC equipped vehicle is having warm start problems, it is likely the fuel accumulator has failed.
Product Features:
See More
Product Features:
- Original Equipment Supplier
- Sturdy compact design
- Withstands the most severe operating conditions
- Engineered to the exact OEM specifications
Original Equipment – Crankcase Breather Hose (Part No.B2010185253OEA)
from
$109.89
The Original Equipment Crankcase Breather Hose is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Original Equipment – Crankcase Breather Hose (Part No.B2010129942OEA)
from
$45.77
The Original Equipment Crankcase Breather Hose is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Original Equipment – Crankcase Breather Hose (Part No.B2010185252OEA)
from
$64.24
The Original Equipment Crankcase Breather Hose is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Aftermarket – Breather Hose (Part No.B2010185249OEA)
from
$130.38
The Original Equipment Crankcase Breather Hose is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
APA/URO Parts – Crankcase Breather Hose (Part No.B2010934968APA)
from
$26.77
Air hoses and lines for diesel and gasoline engines with additional blow-by for crankcase ventilation. Prefabricated modules in raw and clean air duct using injection-molded elastomer and plastic items, and blow-molded items.
Product Features:
See More
Product Features:
- Mount for temperature sensors
- Noise damping
- Folds and ribs for flexibility and vacuum stability
- Molded-on mounts for wires or cables
- Integrated flow divider
- Integrated positioning and attachment of prefabricated hose clamps
- Radial reinforcement for high vacuum stress in tight installation spaces
APA/URO Parts – Crankcase Breather Hose (Part No.B201029501APA)
from
$44.92
Air hoses and lines for diesel and gasoline engines with additional blow-by for crankcase ventilation. Prefabricated modules in raw and clean air duct using injection-molded elastomer and plastic items, and blow-molded items.
Product Features:
See More
Product Features:
- Mount for temperature sensors
- Noise damping
- Folds and ribs for flexibility and vacuum stability
- Molded-on mounts for wires or cables
- Integrated flow divider
- Integrated positioning and attachment of prefabricated hose clamps
- Radial reinforcement for high vacuum stress in tight installation spaces
Aftermarket – Breather Hose (Part No.B2010185251OEA)
from
$144.07
The Original Equipment Crankcase Breather Hose is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Popular 1979 Porsche 911 Fuel and Emissions Systems Categories
1979 Porsche 911 Fuel and Emissions Systems
You count on your 1979 Porsche 911 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 18 Fuel and Emissions Systems ranging in price from $7.84 to $752.09, you’re sure to find everything you need for your 1979 Porsche 911.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 8 different brands like Delphi, Carquest Premium, and Motorad. 1979 Porsche 911 Fuel and Emissions Systems start as low as $7.84!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 3 extensive product reviews on 1979 Porsche 911 Fuel and Emissions Systems.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1979 Porsche 911 below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 1979 Porsche 911
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1979 Porsche 911 running right for years to come. In our inventory you’ll find brands like Delphi, Carquest Premium, Motorad, and even more.
Popular Carquest Premium Fuel and Emissions Systems
You’ll find popular Carquest Premium brand products across Gas Caps. All are waiting to get your 1979 Porsche 911 back on the road. Some of the top-rated Carquest Premium products in these categories are:
FAQs for 1979 Porsche 911 Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 1979 Porsche 911?
Out of 18 Fuel and Emissions Systems for the 1979 Porsche 911, the most popular in our inventory are:
