Name: High Mileage 5W-30 Conventional Motor Oil, Restores Seals, 5 Quart
Brand: FRAM
SKU: F660-5QT
Price: 24.99 USD

Essential 1979 Oldsmobile Custom Cruiser Motor Oil

from

$24.99

FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 5W30 grades will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

Formulated with a unique combination of premium base oils and an enhanced additive system
Provides increased protection in higher mileage engines
Helps restore seal condition to reduce oil consumption
Increases protection against high temperature deposits and ring sticking
Always refer to your vehicles operating manual to select the correct grade oil for your engine.
Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.

from

$27.99

FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation & shear stability over previous oil categories.

Product Features:

Outstanding thermal and oxidation stability.
Excellent sludge and varnish protection
Faster oil flow at start-up
Volatility: Lowers oil vaporization and consumption at extreme conditions
ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 10W-30 is formulated with high-quality synthetic base stocks and the latest additive technology to provide the ultimate protection for your engine.
Advanced LSPI Prevention: Contains additive technology specifically designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines.
Enhanced Wear Protection: Offers increased wear protection, ensuring your engine components remain in optimal condition even under rigorous driving conditions.
Versatile Engine Compatibility: Suitable for a wide range of engines, including GDI, TGDI, carbureted, and normally fuel-injected engines, making it a versatile choice for various vehicle types.

from

$25.99

Super 10W-30 Synthetic Blend Engine Oil delivers proven protection to ensure long engine life and optimal performance. Designed to combat sludge and deposits for up to 5,000 miles, this advanced synthetic blend features 15 percent extra cleaning additives to keep your engine running clean and smooth. Its enhanced formulation provides outstanding wear protection under various operating conditions while maintaining oil viscosity for easier cold starts. Ideal for gasoline cars and light-duty trucks, this oil is a reliable choice for drivers seeking durability and efficiency. With its ability to safeguard your engine and extend its lifespan, this 5-quart solution offers exceptional value and peace of mind for everyday driving.

Product Features:

Product Features:

Mobil Super Synthetic Blend motor oil 10W-30 works to protect your engine from sludge and deposits for up to 5,000 miles
Helps to keep your engine clean with 15 percent extra cleaning additives, preventing sludge and deposit formation
Works to provide outstanding engine wear protection under a variety of operating conditions
Enhanced formulation (vs. Mobil basic conventional oil) helps to conserves oil viscosity for easier cold starting
Recommended for gasoline cars and light-duty trucks

from

$6.49

FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 5W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

Formulated with a unique combination of premium base oils and an enhanced additive system
Provides increased protection in higher mileage engines
Helps restore seal condition to reduce oil consumption
Increases protection against high temperature deposits and ring sticking
Always refer to your vehicles operating manual to select the correct grade oil for your engine.
Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.

from

$65.99

Shell Rotella T5 10W-30 Synthetic Blend diesel engine oil with Triple Protection Plus technology combines synthetic base oils and advanced additive technology to provide protection against wear, deposits, and oil breakdown. Triple Protection Plus technology also provides better low-temperature flow and better fuel economy performance (up to 2% fuel economy savings compared to conventional 15W-40 motor oil). The advanced low-ash formulation helps control the blocking or poisoning of exhaust after-treatment devices, helping maintain vehicle emission compliance and engine fuel efficiency. Meeting the requirements of major US and European engine manufacturers for low-emission, heavy-duty engine applications, it’s an excellent choice for on-highway fleets, construction and agriculture applications, and diesel pick-up trucks. Shell Rotella T5 is backed by a free warranty valid up to 10 years or 300,000 miles, whichever comes first. (Shell Rotella Limited Warranty: Valid up to 10 years or 300,000 miles, whichever comes first, if you exclusively use Shell Rotella T5 Synthetic Blend heavy-duty engine oil. Terms and conditions apply. See Rotella.Shell.com/warranty for details.)

Product Features:

Synthetic blend 10W-30 diesel engine oil with Triple Protection Plus technology protects against wear, deposits, and oil breakdown
Ideal for on-highway fleets, construction, and agricultural machinery, and diesel pickup trucks including high-power vehicles that require resistance to heat and stress
Triple Protection Plus technology offers better low-temperature flow, which delivers excellent equipment protection, long engine life, and maintains viscosity control under high temperatures
Fuel economy savings up to 2% compared to a conventional 15W-40, helping you stretch your budget and improve your bottom line
Delivers good engine cleanliness and protection against piston deposits, ensuring engine and component reliability at extended oil drain intervals
Low ash formulation helps protect the exhaust catalysts and particulate filters found on the latest low-emission vehicles
Limited warranty valid up to 10 years or 300,000 miles (whichever comes first) if you exclusively use Shell Rotella T5 Synthetic Blend heavy-duty engine oil
Meets or exceeds the following industry requirements: API CK-4, CJ-4, CI-4 PLUS, CI-4, CH-4; ACEA E11
Meets or exceeds the following OEM specifications: Caterpillar ECF-3, ECF-2; Cummins CES 20086, 20081; Detroit Fluid Specification (DFS) 93K222, 93K218; Deutz DQC III-10 LA; DFTR 15c100 (prev. MB-Approval 228.31)
Ford WSS-M2C171-F1; Mack EO-S 4.5, EO-O Premium Plus; MAN M 3575; MTU Category 2.1; Volvo VDS-4.5, VDS-4
For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual

from

$34.99

Shell Rotella T6 10W-30 diesel engine oil is a full synthetic motor oil that features exclusive Triple Protection Plus technology. It’s formulated with fully synthetic base oils plus advanced additives to protect against wear, deposits, and oil breakdown. It also provides lower oil consumption for reduced maintenance costs, improved wear performance versus API CJ-4 technology, extended drain capabilities for more uptime, improved protection against oxidation for increased fuel economy, and a low ash formulation for emissions system compatibility. Suitable for virtually all modern low-emission heavy-duty engines and older hard-working diesel engines, Shell Rotella T6 10W-30 is an excellent choice for on-highway fleets, general haul, construction, agriculture, public-transport operators, and diesel pick-up trucks. Shell Rotella T6 is backed by a limited warranty valid up to 15 years or 500,000 miles (whichever comes first), guaranteed. (Shell Rotella Limited Warranty: Up to 15 years or 500,000 miles, whichever comes first, guaranteed, if you exclusively use Shell Rotella T6 Full Synthetic heavy-duty engine oil and meet enrollment mileage and vehicle manufacture date requirements. Enrollment required. Keep your receipts. Other conditions apply. See Rotella.com/warranty to enroll and for full details and terms.)

Product Features:

Full synthetic 10W-30 diesel engine oil with Triple Protection Plus technology protects against wear, deposits, and oil breakdown
Provides the performance you expect from a full synthetic engine oil in the viscosity grade you prefer and trust
Extended drain capability for more uptime
Improved wear performance versus API CJ-4 technology
Compatibility with exhaust emissions control systems
Excellent choice for operators in locations with large ambient temperature ranges
Limited warranty valid up to 15 years or 500,000 miles (whichever comes first) if you exclusively use Shell Rotella T6 Full Synthetic Technology heavy-duty engine oil
Meets or exceeds the following industry requirements: API: CK-4, CJ-4, CI-4 PLUS, CI-4, CH-4; ACEA E11; JASO DH-2
Meets or exceeds the following OEM specifications: Caterpillar ECF-2/ECF-3; Cummins CES 20086, 20081; Detroit Fluid Specification (DFS) 93K222, 93K218; Deutz DQC III-18 LA; DTFR 15C100 (prev. MB 228.31); Ford WSS-M2C171-F1; MACK EOS-4.5; MAN M 3775; Volvo
For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual

from

$24.99

FRAM Engine Oil SAE 5W-20 utilizes a blend of high quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-20 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

Low-speed pre-ignition control.
Chain wear protection
Piston cleanliness
Turbo-compatibility
Always refer to your vehicles operating manual to select the correct grade oil for your engine.
Reliable engine protection: FRAM Conventional Oil 5W20 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.

from

$25.99

Super 5W-30 Full Synthetic Engine Oil delivers advanced protection to ensure long-lasting engine performance. Designed to combat the five key factors that can damage engines over time, this oil safeguards critical engine components for up to 10,000 miles between changes. Its advanced formula controls oxidation to prevent oil breakdown while maintaining optimal viscosity, ensuring smooth operation in extreme temperatures ranging from -30 Deg. F to 500 Deg. F. Meeting ILSAC GF-6 standards, it offers superior protection against low-speed pre-ignition and timing chain wear, while also improving fuel economy and keeping your engine clean. By preventing harmful deposits and sludge buildup, this oil helps extend engine life, making it a reliable choice for drivers seeking durability and efficiency.

Product Features:

Product Features:

Mobil 1 advanced full synthetic motor oil 5W-30 helps to protect your engine from the five factors that can damage engines over time
Helps to protect critical engine parts for up to 10,000 miles between oil changes, controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
Helps extend engine life by working to prevent damaging deposits and sludge buildup
Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)

from

$7.49

FRAM Full Synthetic High Mileage SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-20 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-20 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:

Faster oil flow at start-up
Fuel efficiency gains over heavier grade oils
Reduces oil cumsumption
Excellent sludge and varnish protection
Slows engine leaks
Outstanding thermal and oxidation stability
Lowers oil vaporization and consumption at extreme conditions
ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
Protection for Advanced Engine Designs: Specifically designed for gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs, providing increased protection and preventing low-speed pre-ignition (LSPI) which can lead to premature engine failure.
Increased Wear Protection and Stability: Provides increased wear protection, oxidation, and shear stability for higher mileage vehicles, ensuring long-lasting engine performance and reliability.

from

$22.99

T4 Triple Protection 10W-30 Diesel Engine Oil delivers advanced performance and reliability for diesel engines, combining cutting-edge technology with the trusted durability of Shell Rotella. This conventional oil is engineered to provide enhanced protection against oxidation, wear, and deposits, ensuring your engine stays cleaner and performs better over time. Its improved formula supports sustained emission control system durability, making it ideal for vehicles equipped with particulate filters and after-treatment systems. Designed for hard-working diesel engines, this 10W-30 oil adapts to demanding driving conditions, offering consistent performance and long-lasting protection. With a 1-gallon capacity, it’s a dependable choice for maintaining engine health and efficiency.

Product Features:

Enhanced protection against oxidation.
Enhanced wear protection
Improved deposit control/cleanliness
Sustained emission control system durability in particulate filters and after-treatment systems. (Compared to prior Shell Rotella Triple Protection 15W-40.)
Adapts to demanding driving conditions to provide consistent performance and long-lasting engine protection.

from

$36.99

Today’s advanced engine technology requires advanced protection. Valvoline Advanced Full Synthetic, the motor oil designed to protect today’s sophisticated engines, contains premium anti-wear additives, superior antioxidants and extra detergents. It protects 40% better against wear, resists oil breakdown 10-times better, and defends 25% more against deposits than industry standards for maximum performance and engine longevity. And with an exceptional range of temperature protection your engine will ready for extreme weather. Valvoline invented motor oil 150 years ago, and we’ve been reinventing it ever since. Get Valvoline Advanced Full Synthetic and give your engine the advanced protection proven to maximize engine life.

Product Features:

ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
Enhanced Oil Stability: Resists oil breakdown 10-times better than industry standards, providing consistent performance and reliability.
Premium Additives: Contains premium anti-wear additives, superior antioxidants, and extra detergents for maximum performance and engine longevity.

from

$24.99

FRAM Engine Oil SAE 5W-30 utilizes a blend of high quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

Low-speed pre-ignition control.
Chain wear protection
Piston cleanliness
Turbo-compatibility
Always refer to your vehicles operating manual to select the correct grade oil for your engine.
Reliable engine protection: FRAM Conventional Oil 5W30 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.

from

$7.49

FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories.

Product Features:

Product Features:

Outstanding thermal and oxidation stability
Excellent sludge and varnish protection
Faster oil flow at start-up
Volatility: lowers oil vaporization and consumption at extreme conditions
Always refer to your vehicles operating manual to select the correct grade oil for your engine.
Ultimate engine protection: FRAM Full Synthetic Oil 10W30 1 QT is specifically formulated with high-quality synthetic base stocks and advanced additive technology to provide the ultimate protection for your engine, ensuring its longevity and performance.

from

$11.99

Castrol EDGE High Mileage 5W-30 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.

Product Features:

Product Features:

Phosphorus Replacement Technology to help extend the life of the emission system
Reduces leaks, oil burnoff and power robbing deposits
15,000 miles between oil changes (1)
(1) Or one year, whichever comes first
Meets or exceeds the following specifications:
API SP/SN PLUS/SN/SM
ILSAC GF-6
Meets engine test requirements of Chrysler MS 6395
Meets Ford WSS-M2C946-B1
Meets Ford WSS-M2C961-A1

from

$6.99

T4 Triple Protection 10W-30 Synthetic Blend Diesel Engine Oil delivers advanced performance for diesel engines, combining cutting-edge technology with proven reliability. This synthetic blend is engineered to provide enhanced protection against oxidation and wear, ensuring your engine stays robust under demanding conditions. Its improved deposit control promotes cleanliness, helping to maintain optimal engine performance over time. Designed specifically for diesel engines, this oil sustains emission control system durability, making it ideal for vehicles equipped with particulate filters and after-treatment systems. With its SAE 10W-30 weight, it adapts seamlessly to varying driving conditions, offering consistent protection and efficiency. Whether you’re tackling tough jobs or long hauls, this oil is built to keep your engine running smoothly while maximizing its lifespan.

Product Features:

Product Features:

Enhanced protection against oxidation
Enhanced wear protection
Improved deposit control/cleanliness
Sustained emission control system durability in particulate filters and after-treatment systems. (Compared to prior Shell Rotella« Triple Protection« 15W-40.)
Sustained emission control system durability in particulate filters and after-treatment systems. (Compared to prior Shell Rotella® Triple Protection® 15W-40.)
Adapts seamlessly to varying driving conditions, providing consistent protection and efficiency for diesel engines.

from

$29.99

Castrol® GTX® 5W-30 is a synthetic blend motor oil with a double-action formula proven to clean away the sludge that can block engine oilways (1) and help prevent new sludge formation. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. (1) When tested in engines with a high level of sludge

Product Features:

Premium-quality base oils and anti-wear additives that help extend engine life
Superior protection against engine sludge
Advanced protection against viscosity and thermal breakdown
Superior protection against high-temperature deposits
Meets or exceeds the following specifications:
API SP/SN PLUS/SN/SM
ILSAC GF-6
Meets Ford WSS-M2C961-A1
Meets Ford WSS-M2C946-B1

from

$11.99

Castrol EDGE 5W-30 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrol’s strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.

Product Features:

Product Features:

3X Stronger than the leading full synthetic (1)
10X Better high stress performance (2)
20,000 miles between oil changes (3)
(1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
(2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
(3) Or one year, whichever comes first
Approved and Licensed Specifications:
ILSAC GF-6
Exceeds API SP/SN PLUS/SN/SM
GM dexos1 Gen 3
Meets engine test requirements of Chrysler MS 6395
Meets Ford WSS-M2C946-B1
Meets Ford WSS-M2C961-A1

from

$24.99

FRAM Engine Oil SAE 10W-30 utilizes a blend of high quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

Low-speed pre-ignition control.
Chain wear protection
Piston cleanliness
Turbo-compatibility
Always refer to your vehicles operating manual to select the correct grade oil for your engine.
Suitable for modern engines: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs.

from

$29.99

Environmental factors such as poor fuel quality, hot weather and stop-start driving conditions can lead to sludge, varnish and carbon build-up in your engine: three factors that reduce engine life, power and fuel economy. Castrol Ultraclean is a synthetic blend engine oil available in 0W-20, 5W-20 and 5W-30 grades. Its double-action formula has been proven to clean away the sludge that can block engine oilways and helps prevent new sludge formation thanks to its synthetic technology. In fact, it provides up to 1.4X better sludge protection than is demanded by the latest industry standard. If keeping your engine clean is important to you, it’s good to know that no other oil keeps engines cleaner.

Product Features:

1.4X superior sludge protection compared to tough industry standards (As measured in the Sequence VH Sludge test vs. API SP test limits)
Advanced protection against viscosity and thermal breakdown
Superior protection against high-temperature deposits
Premium-quality base oils and anti-wear additives that help extend the life of your engine
Double-Action Formula: The synthetic blend engine oil features a double-action formula that effectively cleans away existing sludge and prevents new sludge formation.
Versatile Grades: Available in 0W-20, 5W-20, and 5W-30 grades, Castrol Ultraclean caters to various engine requirements and driving conditions.
Enhanced Engine Performance: By reducing sludge, varnish, and carbon build-up, this oil helps improve engine life, power, and fuel economy.
Synthetic Blend Composition: The GTX Ultraclean 5W-20 Synthetic Blend Motor Oil combines the benefits of synthetic technology with the reliability of a standard oil class.

from

$37.99

Pennzoil Platinum High Mileage Full Synthetic 10W-30 is designed to maximize engine protection and is formulated to help stop leaks in engines with more than 75,000 miles. Backed by a 15,000-mile protection guarantee to keep you covered between oil changes and for the long run (see Warranty Information below), it is the first of its kind full synthetic high mileage motor oil made with natural gas and designed to deliver less oil burn off than other high mileage oils (based on Sequence IIIH results). Pennzoil Platinum High Mileage motor oil conditions seals on older engines to give added protection to high-mileage vehicles. It offers complete protection mile after thrilling mile as it protects engines from loss of horsepower, offers excellent performance in extreme temperatures, provides unsurpassed wear protection (based on Sequence IVA wear test using SAE 5W-30), and provides better fuel economy (based on the latest industry standards). (Pennzoil Platinum Lubrication Limited Warranty: Protection for up to 15,000 miles or one year, whichever comes first. Use an oil filter designed for longer oil change intervals and follow OEM manual and vehicles oil life sensor to maintain OEM warranty. Excludes severe driving conditions, including racing and commercial use. Your engine must have fewer than 125,000 miles and have been manufactured in the past 72 months. Enrollment required. Other conditions apply. See pennzoil.com/warranty to enroll and for full details and terms.)

Product Features:

Full synthetic 10W-30 engine oil designed for vehicles with more than 75,000 miles
Backed by a 15,000-mile protection guarantee to keep you covered between oil changes and in the long run
Keeps pistons cleaner than required by the toughest industry standards (based on Sequence IIIH results; does not apply to Pennzoil Platinum Euro motor oil)
Proven to help stop leaks for engines with more than 75,000 miles
Formulated to deliver less oil burn-off than high-mileage motor oils made from crude oil
Provides better fuel economy (based on the latest industry standards) and helps protect horsepower
Provides faster low-temperature oil flow and protects in extreme heat
Exceeds the requirements of the following industry specifications: API SP, API SP-Resource Conserving, and all previous categories; ILSAC GF-6A
Meets or exceeds the following OEM requirements: Chrysler MS-6395
For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual

from

$6.49

FRAM Engine Oil SAE 20W-50 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 20W-50 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 20W-50 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

Low-Speed Pre-Ignition Control
Chain Wear Protection
Piston Cleanliness
Turbo-Compatibility
ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
High-Quality Conventional Base Stocks: FRAM Engine Oil SAE 20W-50 utilizes a blend of high-quality conventional base stocks for reliable engine protection.
Versatile Compatibility: Suitable for modern gas-direct engines (GDI), turbo gas-direct engines (TGDI), and older carbureted or normally fuel-injected gasoline engine designs.
Meets Industry Standards: Complies with API SP, SN Plus, SN, SM, and ILSAC GF-6A, GF-5, and earlier API and ILSAC Service Categories.
Broad Operating Range: Designed to provide reliable engine protection across a broad range of operating conditions.

from

$34.99

Formulated to perform well in gasoline engines without sacrificing protection in diesel engines, Shell Rotella T6 Multi-Vehicle 5W-30 heavy duty engine oil is a full synthetic motor oil that features exclusive Triple Protection Plus technology. Blended with lower levels of phosphorous compared to most diesel engine oils, it is able to meet both API CK-4 and SN performance standards allowing mixed fleet customers to consolidate lubricants. Designed to provide hard-working protection that adapts to your driving conditions, Shell Rotella T6 Multi-Vehicle provides excellent protection against wear, deposits, and oil breakdown, delivers demonstrated 2.8% improvement in fuel economy, and provides excellent extreme high/low-temperature protection. It also offers improved oxidation performance (relative to CJ-4 quality engine oils) and a low-ash formulation that helps protect exhaust catalysts and particulate filters found on the latest low-emission vehicles. With its wide range of specifications and approvals from many of the world’s leading engine makers, it is ideal for on- or off-road applications. Shell Rotella T6 MV is backed by a limited warranty valid up to 15 years or 500,000 miles (whichever comes first), guaranteed. (Compared to conventional SAE 15W-40 engine oil. Shell Rotella Limited Warranty: Valid up to 10 years or 300,000 miles, whichever comes first, if you exclusively use Shell Rotella T5 Synthetic Blend heavy-duty engine oil. Terms and conditions apply. See Rotella.Shell.com/warranty for details.)

Product Features:

Full synthetic 5W-30 engine oil with Triple Protection Plus technology protects against wear, deposits, and oil breakdown, and improves high/low-temperature performance
Performs extremely well in both diesel and gasoline engines, allowing mixed fleet customers to consolidate lubricants
Better fuel economy performance of up to 2.8%, helping to deliver fuel savings without compromising engine protection or durability
Blended with lower levels of phosphorous compared to most diesel engine oils
Strong oxidation protection helps to minimize the formation of acids and oil thickening, resulting in a longer, cleaner engine life
Excellent cold temperature flow for easier start-ups in extreme cold temperatures
Limited warranty valid up to 15 years or 500,000 miles (whichever comes first), guaranteed, if you exclusively use Shell Rotella T6 MV Full Synthetic heavy-duty engine oil
Meets or exceeds the following industry specifications: API CK-4, CJ-4, CI-4 Plus, CI-4; API SN; ACEA E6; JASO DH-2
Meets or exceeds the following OEM requirements: Caterpillar ECF-2/ECF-3; Cummins CES 20081, 20086; DDC DFS 93K222, 93K218; DTFR 15C110 (prev. MB 228.51); MACK EO-S 4.5, EO-O Premium Plus; MTU Category 3.1; Volvo VDS 4.5, VDS-4
For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual

from

$6.49

FRAM Engine Oil SAE 5W-20 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-20 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

Low-speed pre-ignition control
Chain wear protection
Piston cleanliness
Turbo-compatibility
Always refer to your vehicles operating manual to select the correct grade oil for your engine.
Reliable engine protection: FRAM Conventional Oil 5W20 1 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.

from

$7.49

FRAM Engine Oil Full Synthetic SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 3 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-30 and is a fully licensed GM dexos1 Gen 3 motor oil.

Product Features:

Faster oil flow at start-up
Fuel efficiency gains over heavier grade oils
Excellent sludge and varnish protection
Outstanding thermal and oxidation stability
Lowers oil vaporization and consumption at extreme conditions
ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-30 meets stringent API: SP, SN, SM, SL, SJ, GM Dexos1 Gen 3, and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs, reducing the risk of premature engine failure.
Enhanced Wear Protection: Provides increased wear protection, oxidation, and shear stability over previous oil categories, extending the life of your engine.
Versatile Compatibility: Suitable for use in carbureted, normally fuel-injected engines, and the rigorous environment of GDI and TGDI engines, offering broad application versatility.
Fully Licensed GM dexos1 Gen 3: This oil is a fully licensed GM dexos1 Gen 3 motor oil, ensuring it meets the high standards set by General Motors for optimal engine performance.

from

$7.49

FRAM Full Synthetic High Mileage SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 10W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 10W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:

Faster oil flow at start-up
Fuel efficiency gains over heavier grade oils
Reduces oil cumsumption
Excellent sludge and varnish protection
Slows engine leaks
Outstanding thermal and oxidation stability
Lowers oil vaporization and consumption at extreme conditions
Always refer to your vehicles operating manual to select the correct grade oil for your engine.

from

$11.99

Castrol EDGE High Mileage 10W-30 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.

Product Features:

Product Features:

Phosphorus Replacement Technology to help extend the life of the emission system
Reduces leaks, oil burnoff and power robbing deposits
15,000 miles between oil changes (1)
(1) Or one year, whichever comes first
Meets or exceeds the following specifications:
API SP/SN PLUS/SN/SM
ILSAC GF-6

from

$9.49

Castrol® GTX® High Mileage 5W-30 Synthetic Blend Motor Oil is the ultimate choice for extending the life of high-mileage engines. Designed with advanced Phosphorus Replacement Technology, it safeguards emission systems by reducing catalytic converter damage while delivering exceptional protection against sludge, wear, and oil burn-off. This synthetic blend exceeds industry standards for volatility and dispersancy, ensuring your engine stays cleaner and performs better over time. With seal conditioners to minimize leaks and advanced additives to reduce engine wear, it’s engineered to keep your vehicle running smoothly. Compatible with API SP/SN PLUS/SN/SM and ILSAC GF-6 specifications, it meets Ford WSS-M2C946-B1 and WSS-M2C961-A1 standards, making it a reliable choice for a wide range of vehicles. Additionally, its improved fuel economy in 5W-30 grade adds value by optimizing performance and efficiency. Perfect for drivers seeking durability and superior engine protection in a convenient 1-quart size.

Product Features:

Product Features:

Phosphorus Replacement Technology helps extend emission system life
Superior dispersancy that fights sludge build up
Exceptional oil burn-off protection exceeding industry standards (1)
Seal conditioners to help reduce leaks
Advanced additives that minimize engine wear
Improved fuel economy (2)
(1) Based on API and ACEA volatility specifications
(2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
Meets or exceeds the following specifications:
API SP/SN PLUS/SN/SM
ILSAC GF-6
Meets Ford WSS-M2C946-B1
Meets Ford WSS-M2C961-A1

from

$24.99

FRAM Engine Oil SAE 20W-50 utilizes a blend of high quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 20W-50 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 20W-50 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

Low-speed pre-ignition control.
Chain wear protection
Piston cleanliness
Turbo-compatibility
Always refer to your vehicles operating manual to select the correct grade oil for your engine.
Reliable engine protection: FRAM Conventional 20W50 5 QT utilizes a blend of high-quality conventional base stocks and a robust additive system to provide reliable engine protection across a broad range of operating conditions.

Most Popular Engine Oil for 1979 Oldsmobile Custom Cruisers

Enhance your 1979 Oldsmobile Custom Cruiser with one of the 8 Engine Oil we have in stock, starting at just $6.99.

show more show less

from

$11.99

Mobil 1 advanced full synthetic motor oil 5W-30 helps to extend engine life for vehicles of all ages. Mobil 1 advanced synthetic motor oil is designed to deliver outstanding engine protection from the five factors that can damage engines over time and protect critical engine parts for up to 10,000 miles between oil changes (1) . Its uniform synthetic oil molecules reduce friction, helping to prevent deposits and sludge buildup. Mobil 1 helps to keep your engine running at lower temperatures. (2) This technologically advanced motor oil is proven to cool engine temperatures by over 10%. (3) Its formulation provides excellent internal engine heat protection (up to 500 degrees Fahrenheit), and low-temperature protection (to -30 degrees Fahrenheit), supporting quick cold-weather starting and ultra-fast protection. Mobil 1 advanced full synthetic motor oil meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy. Mobil 1 advanced full synthetic motor oil 5W-30 also helps control oxidation to prevent oil breakdown and is recommended by ExxonMobil for all types of modern vehicles, including high-performance turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s leading synthetic motor oil brand at retail, recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR®. ((1) Protects for up to 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2) Compared to conventional oil. (3) Based on proprietary engine testing results may vary. (4) Source: The NPD Group/Retail Tracking Service/Dollar Sales/PCMO Full Synthetic/52 weeks ending February 25, 2023.)

Product Features:

Mobil 1 advanced full synthetic motor oil 5W-30 helps to protect your engine from the five factors that can damage engines over time.
Helps protect critical engine parts for up to 10,000 miles between oil changes, (1) controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
Mobil 1 is specially formulated to help remove sludge and lower engine temperatures
Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
Manufacturer Part Number: 124315
Versatile Application: Recommended by ExxonMobil for all types of modern vehicles, including high-performance turbo-charged and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks.

from

$37.99

Give your higher mileage engine the care it deserves with Mobil 1 High Mileage full-synthetic motor oil 10W-30. This formula utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness to vehicles with over 75,000 miles. Mobil 1 High Mileage motor oil extends engine life by reducing friction and preventing deposits and sludge buildup, keeping critical engine parts clean and protected for up to 10,000 miles between oil changes. (1) Mobil 1 helps to keep your engine running at lower temperatures (2) and is proven to cool engine temperatures by over 10%. (3) Mobil 1 High Mileage full-synthetic motor oil 10W-30 also helps control oxidation to prevent oil breakdown and is recommended by ExxonMobil for all types of modern cars, SUVs, light vans, and light trucks, including those with high-performance, turbocharged, supercharged, multi-valve, or fuel-injected engines. Mobil 1 is America’s No. 1 selling synthetic motor oil brand at retail, (4) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR®. ((1) Protects for up to 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2) Compared to conventional oil. (3) Based on proprietary engine testing results may vary. (4) Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO full-synthetic/ 52 weeks ending Feb 25, 2023)

Product Features:

Mobil 1 High Mileage full-synthetic motor oil 10W-30 is designed for engines with over 75,000 miles to go up to 10,000 miles between oil changes (1)
Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
Mobil 1 is specially formulated to help remove sludge and lower engine temperatures
Manufacturer Part Number: 120770
Extended Engine Life: This motor oil extends engine life by reducing friction and preventing deposits and sludge buildup, keeping critical engine parts clean and protected for up to 10,000 miles between oil changes.
Temperature Control: Mobil 1 helps to keep your engine running at lower temperatures and is proven to cool engine temperatures by over 10%, compared to conventional oil.
Oxidation Control: The formula helps control oxidation to prevent oil breakdown, ensuring long-lasting performance and protection for modern cars, SUVs, light vans, and light trucks.
Trusted Brand: Mobil 1 is America’s No. 1 synthetic motor oil brand at retail, trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR«.
Trusted Brand: Mobil 1 is America’s No. 1 synthetic motor oil brand at retail, trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR®.

from

$28.99

Product Features:

Synthetic blend 10W-30 diesel engine oil with Triple Protection Plus technology protects against wear, deposits, and oil breakdown
Ideal for on-highway fleets, construction, and agricultural machinery, and diesel pickup trucks including high-power vehicles that require resistance to heat and stress
Triple Protection Plus technology offers better low-temperature flow, which delivers excellent equipment protection, long engine life, and maintains viscosity control under high temperatures
Fuel economy savings up to 2% compared to a conventional 15W-40, helping you stretch your budget and improve your bottom line
Delivers good engine cleanliness and protection against piston deposits, ensuring engine and component reliability at extended oil drain intervals
Low ash formulation helps protect the exhaust catalysts and particulate filters found on the latest low-emission vehicles
Limited warranty valid up to 10 years or 300,000 miles (whichever comes first) if you exclusively use Shell Rotella T5 Synthetic Blend heavy-duty engine oil
Meets or exceeds the following industry requirements: API CK-4, CJ-4, CI-4 PLUS, CI-4, CH-4; ACEA E11
Meets or exceeds the following OEM specifications: Caterpillar ECF-3, ECF-2; Cummins CES 20086, 20081; Detroit Fluid Specification (DFS) 93K222, 93K218; Deutz DQC III-10 LA; DFTR 15c100 (prev. MB-Approval 228.31)
Ford WSS-M2C171-F1; Mack EO-S 4.5, EO-O Premium Plus; MAN M 3575; MTU Category 2.1; Volvo VDS-4.5, VDS-4
For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual

from

$65.99

Synthetic blend 10W-30 diesel engine oil with Triple Protection Plus technology protects against wear, deposits, and oil breakdown
Ideal for on-highway fleets, construction, and agricultural machinery, and diesel pickup trucks including high-power vehicles that require resistance to heat and stress
Triple Protection Plus technology offers better low-temperature flow, which delivers excellent equipment protection, long engine life, and maintains viscosity control under high temperatures
Fuel economy savings up to 2% compared to a conventional 15W-40, helping you stretch your budget and improve your bottom line
Delivers good engine cleanliness and protection against piston deposits, ensuring engine and component reliability at extended oil drain intervals
Low ash formulation helps protect the exhaust catalysts and particulate filters found on the latest low-emission vehicles
Limited warranty valid up to 10 years or 300,000 miles (whichever comes first) if you exclusively use Shell Rotella T5 Synthetic Blend heavy-duty engine oil
Meets or exceeds the following industry requirements: API CK-4, CJ-4, CI-4 PLUS, CI-4, CH-4; ACEA E11
Meets or exceeds the following OEM specifications: Caterpillar ECF-3, ECF-2; Cummins CES 20086, 20081; Detroit Fluid Specification (DFS) 93K222, 93K218; Deutz DQC III-10 LA; DFTR 15c100 (prev. MB-Approval 228.31)
Ford WSS-M2C171-F1; Mack EO-S 4.5, EO-O Premium Plus; MAN M 3575; MTU Category 2.1; Volvo VDS-4.5, VDS-4
For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual

from

$37.99

Full synthetic 10W-30 engine oil designed for vehicles with more than 75,000 miles
Backed by a 15,000-mile protection guarantee to keep you covered between oil changes and in the long run
Keeps pistons cleaner than required by the toughest industry standards (based on Sequence IIIH results; does not apply to Pennzoil Platinum Euro motor oil)
Proven to help stop leaks for engines with more than 75,000 miles
Formulated to deliver less oil burn-off than high-mileage motor oils made from crude oil
Provides better fuel economy (based on the latest industry standards) and helps protect horsepower
Provides faster low-temperature oil flow and protects in extreme heat
Exceeds the requirements of the following industry specifications: API SP, API SP-Resource Conserving, and all previous categories; ILSAC GF-6A
Meets or exceeds the following OEM requirements: Chrysler MS-6395
For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual

from

$22.99

Enhanced protection against oxidation.
Enhanced wear protection
Improved deposit control/cleanliness
Sustained emission control system durability in particulate filters and after-treatment systems. (Compared to prior Shell Rotella Triple Protection 15W-40.)
Adapts to demanding driving conditions to provide consistent performance and long-lasting engine protection.

from

$6.99

Product Features:

Enhanced protection against oxidation
Enhanced wear protection
Improved deposit control/cleanliness
Sustained emission control system durability in particulate filters and after-treatment systems. (Compared to prior Shell Rotella« Triple Protection« 15W-40.)
Sustained emission control system durability in particulate filters and after-treatment systems. (Compared to prior Shell Rotella® Triple Protection® 15W-40.)
Adapts seamlessly to varying driving conditions, providing consistent protection and efficiency for diesel engines.

from

$34.99

Full synthetic 10W-30 diesel engine oil with Triple Protection Plus technology protects against wear, deposits, and oil breakdown
Provides the performance you expect from a full synthetic engine oil in the viscosity grade you prefer and trust
Extended drain capability for more uptime
Improved wear performance versus API CJ-4 technology
Compatibility with exhaust emissions control systems
Excellent choice for operators in locations with large ambient temperature ranges
Limited warranty valid up to 15 years or 500,000 miles (whichever comes first) if you exclusively use Shell Rotella T6 Full Synthetic Technology heavy-duty engine oil
Meets or exceeds the following industry requirements: API: CK-4, CJ-4, CI-4 PLUS, CI-4, CH-4; ACEA E11; JASO DH-2
Meets or exceeds the following OEM specifications: Caterpillar ECF-2/ECF-3; Cummins CES 20086, 20081; Detroit Fluid Specification (DFS) 93K222, 93K218; Deutz DQC III-18 LA; DTFR 15C100 (prev. MB 228.31); Ford WSS-M2C171-F1; MACK EOS-4.5; MAN M 3775; Volvo
For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual

1979 Oldsmobile Custom Cruiser Motor Oil

FRAM – High Mileage 5W-30 Conventional Motor Oil, Restores Seals, 5 Quart (Part No.F660-5QT)

FRAM – 10W-30 Full Synthetic Motor Oil, Ultimate Protection, 5 Quart (Part No.F940-5QT)

Mobil Super – Super 10W-30 Synthetic Blend Engine Oil, Proven Engine Protection, 5 QT (Part No.98008)

FRAM – High Mileage 5W-30 Conventional Motor Oil, Helps Restore Seal Condition, 1 Quart (Part No.F660)

Shell – T5 10W-30 Synthetic Blend Diesel Engine Oil, Boosts Fuel Economy, 2.5 Gallon (Part No.550045132)

Shell ROTELLA – T6 10W-30 Full Synthetic Diesel Engine Oil, Extended Drain Capability, 1 Gallon (Part No.550069698)

FRAM – 5W-20 Conventional Motor Oil, Low-Speed Pre-Ignition Control, 5 Quart (Part No.F610-5QT)

Mobil Super – Super 5W-30 Full Synthetic Engine Oil, Proven Protection, 5 QT (Part No.98010)

FRAM – High Mileage 5W-20 Full Synthetic Motor Oil, Reduces Oil Consumption, 1 Quart (Part No.F923)

Shell – T4 Triple Protection 10W-30 Diesel Engine Oil, Enhanced Wear Protection, 1 Gallon (Part No.550045144)

Valvoline – Advanced Full Synthetic 10W-30 Motor Oil, Maximizes Engine Life, 5 Quart (Part No.881165)

FRAM – 5W-30 Conventional Motor Oil, Low-Speed Pre-Ignition Control, 5 Quart (Part No.F620-5QT)

FRAM – 10W-30 Full Synthetic Motor Oil, Helps Extend Motor Life, 1 Quart (Part No.F940)

Castrol – Edge High Mileage 5W-30 Full Synthetic Motor Oil, Reduces Leaks & Deposits, 1 Quart (Part No.15979F)

Shell – T4 Triple Protection 10W-30 Synthetic Blend Diesel Engine Oil, Enhanced Wear Protection (Part No.550049485)

Castrol – GTX 5W-30 Synthetic Blend Motor Oil, Helps Extend Engine Life, 5 Quart (Part No.15A66D)

Castrol – Edge 5W-30 Full Synthetic Motor Oil, 20,000 Mile Protection, 1 Quart (Part No.152C3C)

FRAM – 10W-30 Conventional Motor Oil, Low-Speed Pre-Ignition Control, 5 Quart (Part No.F630-5QT)

Castrol – GTX Ultraclean 5W-20 Synthetic Blend Motor Oil, Superior Sludge Protection, 5 Quart (Part No.15A69C)

Pennzoil – Platinum 10W-30 Full Synthetic Motor Oil, Stops Engine Leaks, 5 Quart (Part No.550045274)

FRAM – 20W-50 Conventional Motor Oil, Reliable Motor Protection, 1 Quart (Part No.F650)

Shell ROTELLA – T6 5W-30 Full Synthetic Engine Oil, Improves Fuel Economy, 1 Gallon (Part No.550046251)

FRAM – 5W-20 Conventional Motor Oil, Low-Speed Pre-Ignition Control, 1 Quart (Part No.F610)

FRAM – 5W-30 Full Synthetic Motor Oil, Faster Oil Flow at Start-Up, 1 Quart (Part No.F930)

FRAM – High Mileage 10W-30 Full Synthetic Motor Oil, Reduces Oil Consumption, 1 Quart (Part No.F943)

Castrol – Edge High Mileage 10W-30 Full Synthetic Motor Oil, Reduces Leaks & Deposits, 1 Quart (Part No.15979B)

Castrol – GTX High Mileage 5W-30 Synthetic Blend Motor Oil, Protects Against Sludge & Wear, 1 Quart (Part No.149D6A)

FRAM – 20W-50 Conventional Motor Oil, Low-Speed Pre-Ignition Control, 5 Quart (Part No.F650-5QT)

Mobil 1 – Advanced 5W-30 Full Synthetic Motor Oil, Extends Engine Life, 1 Quart (Part No.24812)

Mobil 1 – High Mileage 10W-30 Full Synthetic Motor Oil, Extends Engine Life, 5 Quart (Part No.14995)

Shell – T5 10W-30 Synthetic Blend Diesel Engine Oil, Boosts Fuel Economy, 1 Gallon (Part No.550045130)

Shell – T5 10W-30 Synthetic Blend Diesel Engine Oil, Boosts Fuel Economy, 2.5 Gallon (Part No.550045132)

Pennzoil – Platinum 10W-30 Full Synthetic Motor Oil, Stops Engine Leaks, 5 Quart (Part No.550045274)

Shell – T4 Triple Protection 10W-30 Diesel Engine Oil, Enhanced Wear Protection, 1 Gallon (Part No.550045144)

Shell – T4 Triple Protection 10W-30 Synthetic Blend Diesel Engine Oil, Enhanced Wear Protection (Part No.550049485)

Shell ROTELLA – T6 10W-30 Full Synthetic Diesel Engine Oil, Extended Drain Capability, 1 Gallon (Part No.550069698)