1979 Mercury Cougar Differentials

Essential 1979 Mercury Cougar Differentials

Pro-King – Differential Pinion Shim Kit (Part No.763A203)

Differential Pinion Shim Kit

from

$11.79
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)

Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25"

from

$8.99
Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.

Product Features:
  • Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
See More

Yukon Gear – 3.062" Side Adjuster For Ford 9" (Part No.32139)

3.062" Side Adjuster For Ford 9"

from

$94.99
3.062″ side adjuster, Only Fits Yukon Ford 9″ Drop Out, new design ONLY.

Product Features:
  • Side adjuster
  • Fits Ford 9″
  • 3.062″ designs only
See More

Yukon Gear – Pinion Install Kit For Ford Daytona 9" Differential (Part No.13048)

Pinion Install Kit For Ford Daytona 9" Differential

from

$294.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Ford 9″ with Daytona pinion support
  • Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Dorman – Rear Axle Shaft, Left or Right (Part No.630-228)

Rear Axle Shaft, Left or Right

from

$242.99
Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:
  • Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models.
  • Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications.
  • Durable construction – designed to rigorous standards and tested to ensure performance
  • Trustworthy solution – backed by team of engineers and quality control specialists in the United States
See More

Dorman – Help – Differential Shaft Lock Bolt (Part No.81048)

Differential Shaft Lock Bolt

from

$5.99
This differential pinion shaft lock bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this differential pinion shaft lock bolt matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

National – Bearings (Part No.R-1535-TAV)

Bearings

from

$41.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • High radial load capacity makes them suitable for high speed applications
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Silver Aluminum Pinion Supprt For 9" Ford Daytona (Part No.32037)

Silver Aluminum Pinion Supprt For 9" Ford Daytona

from

$269.99
Plain Silver aluminum pinion Supprt for 9″ Ford Daytona, HD 6061.

Product Features:
  • Fits Ford 9″ with 28 spline pinion
  • Larger inner pinion bearing reduces gear deflection under high load
  • Races installed
  • 6061 aluminum
See More

Yukon Gear – Bearing Race Driver (Part No.56019)

Bearing Race Driver

from

$219.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits LM104911 race
  • All steel construction
See More

Felpro – Differential Carrier Gasket (Part No.RDS 55074)

Differential Carrier Gasket

from

$8.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Standard Open Spider Gear Kit For 8.8" Ford IRS With 28 Spline Axles (Part No.16020)

Standard Open Spider Gear Kit For 8.8" Ford IRS With 28 Spline Axles

from

$373.99
Yukon standard open spider gear kit for 8.8″ Ford IRS with 28 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fits Ford 8.8″ IRS with 28 spline open differential
  • Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Yukon Gear – Trac Loc Clutch Guide For 9" Ford (Part No.33250)

Trac Loc Clutch Guide For 9" Ford

from

$4.99
Trac Loc clutch guide for 9″ Ford.

Product Features:
  • Clutch guide
  • Fits Ford 8″ and 9″
See More

Yukon Gear – One (1) Specialty Bearing Race To Adapt Small Bearing Journal Into A 3.250" Dropout (Part No.32157)

One (1) Specialty Bearing Race To Adapt Small Bearing Journal Into A 3.250" Dropout

from

$51.99
One (1) specialty bearing race to adapt small bearing journal into a 3.250″ dropout. This adapter allows the use of a 28 or 31 spline carrier, positraction or locker in a 3.250″ dropout. This is a perfect solution if you are currently running 28 or 31 spline axles but are looking to upgrade to 35 spline later, or are stepping down from 35 spline but don’t want to buy a new dropout.

Product Features:
  • Carrier race
  • Fits Ford 9″
  • Conversion race to install small bearing carrier into 3.250″ dropout
See More

Yukon Gear – Yoke (Short, For Daytona Support) For Ford 9" With 28 Spline Pinion And A 1310 U/Joint Size (Part No.41056)

Yoke (Short, For Daytona Support) For Ford 9" With 28 Spline Pinion And A 1310 U/Joint Size

from

$319.99
Yukon yoke (short, for Daytona support) for Ford 9″ with 28 spline pinion and a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. 4″ length. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 9″
  • 28 spline
  • 1310 u-joint size
  • 3.219″ snap ring span
  • 1.062″ cap diameter
  • Outside snap ring design
  • U-bolt style
See More

Yukon Gear – DiffrlCover (Part No.32364)

DiffrlCover

from

$99.99
DiffrlCover

Yukon Gear – Standard Open Or Tracloc Cross Pin Shafts And Block In Four Pinion Design For 9" Ford (Part No.33333)

Standard Open Or Tracloc Cross Pin Shafts And Block In Four Pinion Design For 9" Ford

from

$207.99
Standard open or TracLoc cross pin shafts and block in four pinion design for 9″ Ford.

Product Features:
  • Cross pin shaft and block kit
  • Fits Ford 9″
  • Includes cross pin block and three cross pin shafts
See More

Yukon Gear – Fine Thread Pinion Support Bolt (Aftermarket Aluminum Only) For 9" Ford (Part No.33243)

Fine Thread Pinion Support Bolt (Aftermarket Aluminum Only) For 9" Ford

from

$5.99
Fine thread pinion support bolt (aftermarket aluminum only) for 9″ Ford.

Product Features:
  • Pinion support bolt for Ford 9″
  • 3/8″ x 24 thread
  • 1.5″ long
See More

Powertrax – Grip PRO Traction System (Part No.GT108028)

Grip PRO Traction System

from

$537.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

Felpro – Differential Cover Gasket (Part No.RDS 55341)

Differential Cover Gasket

from

$14.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette (Part No.55002)

Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette

from

$59.99
Product Features:
  • Super carrier shim kit for Ford 8.8″, GM 12 bolt passenger car and truck, GM 8.0″, 8.6″, 8.6″ IRS and 1963-1979 Corvette
  • Interlocking design makes installation much easier
See More

Dorman – Differential Clutch Kit (Part No.697-780)

Differential Clutch Kit

from

$262.99
This differential disc kit is a low-cost, time-saving repair solution for the posi-traction function. They are designed to match the fit and performance of the original disc on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this differential clutch kit provides the necessary components for repairing the original equipment on specific vehicles.
  • Quality materials – all components are built for reliable longevity and performance.
  • Smart solution – provides original equipment fit and function for a competitive price compared to original manufacturer
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Powertrax – Grip PRO Traction System (Part No.GT109028)

Grip PRO Traction System

from

$496.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.SS9)

Differential Pinion Solid Spacer Kit w/Shims

from

$45.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More

Motive Gear – Differential Pinion Nut (Part No.379570S)

Differential Pinion Nut

from

$6.49
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More

Yukon Gear – 14 Plate Carbon Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16041)

14 Plate Carbon Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

from

$404.99
Product Features:
  • Clutch kit
  • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
  • 14 piece kit
  • Carbon fiber clutches
See More

Motive Gear – Differential Mini Spool (Part No.MS9-31)

Differential Mini Spool

from

$31.99


Product Features:
  • MINI SPOOL 8″ & 9″ 31 SPLN STL 090431
See More

Yukon Gear – Star Washers, 3.250" Ford 9" Drop Out New Design Only (Part No.32144)

Star Washers, 3.250" Ford 9" Drop Out New Design Only

from

$4.99
STAR washers, 3.250″ Yukon Ford 9″ Drop Out new design ONLY.

Product Features:
  • Star washer
  • Fits Ford 9″
  • 3.250″ designs only
See More

Yukon Gear – Star Washers, 3.062" Ford 9" Drop Out New Design Only (Part No.32143)

Star Washers, 3.062" Ford 9" Drop Out New Design Only

from

$4.99
STAR washers, 3.062″ Yukon Ford 9″ Drop Out new design ONLY.

Product Features:
  • Star washer
  • Fits Ford 9″
  • 3.062″ designs only
See More

Popular 1979 Mercury Cougar Differentials Categories

1979 Mercury Cougar Differentials

Maybe you’re in the middle of a full rebuild of that 1979 Mercury Cougar. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 422 different Differentials in our inventory ranging from $1.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1979 Mercury Cougar running smoothly.

Differentials are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 1979 Mercury Cougar. Yukon Gear, Dorman, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1979 Mercury Cougar, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 64 reviews in this category, some of the top rated parts include Multi Purpose Seal with 5.0 stars and Lock Right Locker with 5.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1979 Mercury Cougar rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1979 Mercury Cougar Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1979 Mercury Cougar demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Cougar the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Felpro Differentials

We carry Felpro parts in our stock across Automatic Transmission Differential Cover Gaskets categories, plus more. For a 1979 Mercury Cougar, our most popular Felpro Differentials include:
Differential Carrier Gasket
from $8.49
(9)
Differential Carrier Gasket
Automatic Transmission Differential Cover Gaskets

FAQs for 1979 Mercury Cougar Differentials

What are the most purchased Differentials for the 1979 Mercury Cougar?

Out of 422 Differentials for the 1979 Mercury Cougar, the most popular in our inventory are:
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Cover Bolt For Ford 7.5", 8.8" & 9.75"
from $6.99
This product is not rated
Cover Bolt For Ford 7.5", 8.8" & 9.75"
Differential Cover Bolts
Pinion Crush Sleeves
from $5.99
This product is not rated
Pinion Crush Sleeves
Differential Crush Sleeves

What are the top-rated 1979 Mercury Cougar Differentials?

Top-rated Differentials for your 1979 Mercury Cougar based on customer reviews/ratings are:
Multi Purpose Seal
from $15.79
(3)
Multi Purpose Seal
“good quality”
Lock Right Locker
from $444.99
(1)
Lock Right Locker
“Fast service and the right part.”
No-Slip Traction System
from $551.99
(1)
No-Slip Traction System
“Installed, no issues, works great.”