1979 Mercury Bobcat Performance and Racing Products
Find Your Specific 1979 Mercury Bobcat Performance and Racing Products
Below you will find various in-demand Mercury Performance and Racing Products, components and accessories for your 1979 Bobcat. Advance Auto Parts has popular Bobcat parts like Performance Transmissions, Performance Engines, Performance Ignition Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Bobcat model years including
1975,
1976,
1977,
1978,
1980 and more. Select a category of 1979 Mercury Bobcat Performance and Racing Products below and start saving instantly.
Popular 1979 Mercury Bobcat Performance and Racing Products Categories
Essential Performance and Racing Products for 1979 Mercury Bobcats
FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1035)
from
$82.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
K&N – Replacement Air Filter (Part No.E-1200)
from
$157.99
K&N’s replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. We make over 1,200 different replacement air filters for the majority of vehicles on the road. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N. See applicable instruction sheet for details. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty and will be the last air filter your vehicle will ever need.
Product Features:
See More
Product Features:
- This is the last air filter your vehicle will ever need!
- Designed to boost horsepower and rate of acceleration
- Can be cleaned and used again
- High air flow with exceptional filtration
- Lasts up to 50,000 miles before cleaning is required depending on driving conditions
- Works with original equipment manufacturer vehicle electronics
- Emissions legal in all 50 US states
- Will NOT void vehicle warranty
- Million Mile Limited Warranty®
MSD Ignition – Distributor; 2.3L Ford (Part No.8473)
from
$599.99
MSD Pro-Billet Distributors are the finest performance and racing distributors available. Every feature has been engineered to endure the rigors of high performance and racing engines. Whether cruising the streets or racing stock cars, dragsters, boats or trucks, MSD has a distributor for it. MSD uses state-of-the-art, Computer Numerical Controlled (CNC) mills and lathes to machine each housing. After a long series of precise cuts and movements, the billet is formed into a flawless distributor housing that is accurate to within 0.001″. The flex-free housings are lightweight, have no porosity or weak areas and look great on polished, show quality engines.
Product Features:
See More
Product Features:
- CNC machined billet aluminum housing and Dupont Rynite base
- Must Be Used w/An MSD Ignition Control
- Supplied w/Cap; HEI Style Terminals And Rotor
- Nylon pads ensure smooth operation of the advance weights
- Advance weight pins are staked and tig welded to the plate
- Mech. advance assem. can be locked out for crank trigger systems
- Advance plate and weights are fine blanked from chrome moly steel
- QPQ coated for friction reduction
Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)
from
$54.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
B & M – Torque Converter, C4 26 Spline 10.5 BC (Part No.50416)
from
$649.99
A higher than stock stall speed as delivered by a B&M Converter will provide several advantages. The high stall converter allows the engine to launch the car at a higher RPM where more torque is available and increased strength. Due to torque converter co
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
B & M – Torque Converter, Tork Master 2400 (Part No.50441)
from
$517.99
A higher than stock stall speed as delivered by a B&M Converter will provide several advantages. The high stall converter allows the engine to launch the car at a higher RPM where more torque is available and increased strength. Due to torque converter co
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
B & M – Torque Converter, Tork Master 3000 (Part No.50442)
from
$675.99
A higher than stock stall speed as delivered by a B&M Converter will provide several advantages. The high stall converter allows the engine to launch the car at a higher RPM where more torque is available and increased strength. Due to torque converter co
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
B & M – Automatic Shifter, Z-Gate (Part No.80681)
from
$299.99
Reverse lockout meets NHRA and IHRA requirements. Includes neutral safety switch, backup light switch, black T-Handle. Fits most 3 Speed applications.
Product Features:
See More
Product Features:
- Base Trims To Custom Fit Floor
- NHRA/IHRA Reverse Lockout Meets Requirements
- Includes Neutral Safety Switch
- Includes Backup Light Switch
- Includes Black T-Handle and Cable
B & M – Automatic Shifter, StarShifter (Part No.80675)
from
$340.99
Features include NHRA/ IHRA reverse lockout, backup light switch, neutral safety switch, polished T-handle. Cable operated for quick installation and accurate shifting. For 2 and 3 speed applications.
Product Features:
See More
Product Features:
- Base Trims For Custom Fit
- Cable Operated
- Quick Installation
- Accurate Shifting
- NHRA/IHRA Reverse Lockout Meets Requirements
- Includes Neutral Safety Switch
- Polished Aluminum. T-Handle and Cable
B & M – Automatic Shifter, Light Truck Megashifter (Part No.80680)
from
$527.99
The B&M Megashifter has it all, form, function and classic style. This all adds up to bring you a quality shifter that’s been one of the most popular automatic shifters of all time. The light truck Megashifter is better suited for truck and bench seat applications with its overall height of 14.85-inches tall (2.25-inches taller than #80690 Megashifter.) The positive ratcheting action won’t allow you to over-shift and miss a gear at that critical moment, along with the reverse lockout feature meets NHRA/IHRA safety rules for those weekend grudge races at the track, while the look and feel of the T-handle and accordion style shift boot really shows off its racing heritage. Other features include a black console that you can trim to match the contour of your vehicle’s floor, 5-foot long shifter cable, cable brackets, transmission shift levers, chrome plated top plate with lighted gear indicator and everything needed for an easy at home installation. An optional T-handle with a 12-volt button is available separately for actuating a trans-brake, nitrous oxide or other accessories for the hard-core performance enthusiast. This shifter fits most popular Chrysler, Ford and GM 3 and 4-speed automatic transmissions. Note: AOD transmissions require optional kit #40496, GM 4L60E through 4L85E transmissions with PRNDL switch will require optional kit #70499. Overall Dimensions – 14.9L x 6.4W x 14.8H
Product Features:
See More
Product Features:
- Universal Floor Mount Application
- Cable Operated
- Quick Installation
- Accurate Shifting
- NHRA/IHRA Reverse Lockout Meets Requirements
- Use w/Reverse Pattern Valve Body
- Includes Neutral Safety Switch
- Includes Backup Light Switch
Richmond Gear – RngPnn (Part No.F8355)
from
$185.99
RngPnn
Motive Gear – Performance Differential Ring and Pinion (Part No.F880355)
Motive Gear – Performance Differential Ring and Pinion (Part No.F880340)
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$199.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Mallory – Unilite Ignition Module (Part No.605)
from
$92.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
B & M – Transpak (Part No.50229)
from
$149.99
Transpak – 1970 to 1982 Ford, Lincoln, Mercury C4 Recalibrate your automatic transmission for optimum performance Select the mode that best suits your application Improves transmission life Transmission removal not required APPLICATION: 1970 to 1982 Ford,
Product Features:
See More
Product Features:
- Recalibrate Auto. Transmission
- Optimum Performance
- Select Your App. Mode
- Improves Transmission Life
- Trans. Removal Not Required
Accel – Supercoil (Part No.140001)
from
$114.99
Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.
Product Features:
See More
Product Features:
- Oil Filled For Better Cooling
- Optimized Low Resistance
- Silicon Magnetic Steel E-Core
- Higher Energy/Voltage Outputs
- Quicker Starts
- Improved Idle Quality
- Resists Shock And Vibration
- Resists Corrosion
Accel – Super Stock Replacement Coil for Improved Performance, Starting, and Power (Part No.8140)
from
$45.99
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary
Product Features:
See More
Product Features:
- 42000 Volts
- Effective To 6500 RPM
- Quicker Starting
- Improved Throttle Response
- Higher RPM Power
- Can Finished In Yellow
Upgrade your 1979 Mercury Bobcat with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1979 Mercury Bobcat, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercury or enhancing its overall performance, Performance and Racing Products are key to keeping your Bobcat functioning at its best. At Advance Auto Parts, we offer a wide selection of 32 Performance and Racing Products for the 1979 Mercury Bobcat, designed to meet your needs without breaking the bank.
From
Performance Transmission
replacements to
Performance Engines
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1979 Mercury Bobcat at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $20.99 to $675.99, with
an average price of $342.05.
Our 32 Performance and Racing Products in stock come from 11 trusted brands, so you’re sure to find the right part for your 1979 Mercury Bobcat without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1979 Mercury Bobcat, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Mallory, B & M, Accel, and more.
Mallory Performance and Racing Products
start at just $92.99 and boast an impressive 4.9 stars average rating from customers.
B & M and Accel also bring quality to the table, with Performance and Racing Products available starting at $45.99, and at an average 4.1 stars rating.
With 140 customer reviews and counting, our 1979 Mercury Bobcat Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1979 Mercury Bobcat is always ready to roll. We’re committed to providing you with everything you need to keep your Bobcat in top shape, all in one place.
Start shopping confidently below for your 1979 Mercury Bobcat!
Best-Selling Performance Transmissions for 1979 Mercury Bobcats
Enhance the driving experience in your Mercury with 1 quality Performance Transmission components, starting at $149.99.
B & M – Transpak (Part No.50229)
from
$149.99
Transpak – 1970 to 1982 Ford, Lincoln, Mercury C4 Recalibrate your automatic transmission for optimum performance Select the mode that best suits your application Improves transmission life Transmission removal not required APPLICATION: 1970 to 1982 Ford,
Product Features:
See More
Product Features:
- Recalibrate Auto. Transmission
- Optimum Performance
- Select Your App. Mode
- Improves Transmission Life
- Trans. Removal Not Required
Most Popular 1979 Mercury Bobcat Performance Engines
Customize your Mercury with 13 Performance Engines products
like Performance Engine Cylinder Head Gaskets,
Performance Engine Rocker Arms, and
Performance Engine Camshafts, all
priced under $675.99.
FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1035)
from
$82.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
B & M – Torque Converter, Tork Master 3000 (Part No.50442)
from
$675.99
A higher than stock stall speed as delivered by a B&M Converter will provide several advantages. The high stall converter allows the engine to launch the car at a higher RPM where more torque is available and increased strength. Due to torque converter co
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
Competition Cams – High Energy 218/218 Hydraulic Flat Cam/Lifter Kit for Ford 2000-2300 4 Cylinder (Part No.CL70-123-6)
from
$663.99
High Energy 218/218 Hydraulic Flat Cam/Lifter Kit for Ford 2000-2300 4 Cylinder
B & M – Torque Converter, C4 26 Spline 10.5 BC (Part No.50416)
from
$649.99
A higher than stock stall speed as delivered by a B&M Converter will provide several advantages. The high stall converter allows the engine to launch the car at a higher RPM where more torque is available and increased strength. Due to torque converter co
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
Competition Cams – Magnum 236/236 Hydraulic Flat Cam for Ford 2000-2300 4 Cylinder (Part No.70-131-6)
from
$615.99
Magnum 236/236 Hydraulic Flat Cam for Ford 2000-2300 4 Cylinder
Competition Cams – High Energy 201/201 Hydraulic Flat Cam for Ford 2000-2300 4 Cylinder (Part No.70-115-6)
from
$615.99
High Energy 201/201 Hydraulic Flat Cam for Ford 2000-2300 4 Cylinder
Competition Cams – High Energy 218/218 Hydraulic Flat Cam for Ford 2000-2300 4 Cylinder (Part No.70-123-6)
from
$614.99
High Energy 218/218 Hydraulic Flat Cam for Ford 2000-2300 4 Cylinder
Competition Cams – High Energy 210/210 Hydraulic Flat Cam for Ford 2000-2300 4 Cylinder (Part No.70-119-6)
from
$614.99
High Energy 210/210 Hydraulic Flat Cam for Ford 2000-2300 4 Cylinder
Competition Cams – Magnum 226/226 Hydraulic Flat Cam for Ford 2000-2300 4 Cylinder (Part No.70-127-6)
from
$533.99
Magnum 226/226 Hydraulic Flat Cam for Ford 2000-2300 4 Cylinder
B & M – Torque Converter, Tork Master 2400 (Part No.50441)
from
$517.99
A higher than stock stall speed as delivered by a B&M Converter will provide several advantages. The high stall converter allows the engine to launch the car at a higher RPM where more torque is available and increased strength. Due to torque converter co
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
Competition Cams – ENGINE ROCKER ARM (Part No.1270-8)
from
$116.99
ENGINE ROCKER ARM
Competition Cams – Hi-Tech 8.300" Long, .080" Wall, 5/16" Diameter Pushrod (Part No.7971-1)
from
$22.99
Hi-Tech 8.300" Long, .080" Wall, 5/16" Diameter Pushrod
Competition Cams – ENGINE ROCKER ARM (Part No.1270-1)
from
$20.99
ENGINE ROCKER ARM
Top Picks for 1979 Mercury Bobcat Performance Ignition Products
Upgrade Mercury Bobcats with top-quality Performance Ignition Products parts, including 4 OEM and aftermarket selections for your 1979 model.
Mallory – Unilite Ignition Module (Part No.605)
from
$92.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Accel – Super Stock Replacement Coil for Improved Performance, Starting, and Power (Part No.8140)
from
$45.99
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary
Product Features:
See More
Product Features:
- 42000 Volts
- Effective To 6500 RPM
- Quicker Starting
- Improved Throttle Response
- Higher RPM Power
- Can Finished In Yellow
Accel – Supercoil (Part No.140001)
from
$114.99
Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.
Product Features:
See More
Product Features:
- Oil Filled For Better Cooling
- Optimized Low Resistance
- Silicon Magnetic Steel E-Core
- Higher Energy/Voltage Outputs
- Quicker Starts
- Improved Idle Quality
- Resists Shock And Vibration
- Resists Corrosion
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$199.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
In-Demand Performance Air Filters for 1979 Mercury Bobcats
Select from 1 premium Performance Air Filters parts for your 1979 Mercury Bobcat.
K&N – Replacement Air Filter (Part No.E-1200)
from
$157.99
K&N’s replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. We make over 1,200 different replacement air filters for the majority of vehicles on the road. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N. See applicable instruction sheet for details. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty and will be the last air filter your vehicle will ever need.
Product Features:
See More
Product Features:
- This is the last air filter your vehicle will ever need!
- Designed to boost horsepower and rate of acceleration
- Can be cleaned and used again
- High air flow with exceptional filtration
- Lasts up to 50,000 miles before cleaning is required depending on driving conditions
- Works with original equipment manufacturer vehicle electronics
- Emissions legal in all 50 US states
- Will NOT void vehicle warranty
- Million Mile Limited Warranty®
Most Sold 1979 Mercury Bobcat Performance Distributors
Explore our best-selling Mercury parts for the 1979 Bobcat among 1 OEM and aftermarket options starting from $599.99.
MSD Ignition – Distributor; 2.3L Ford (Part No.8473)
from
$599.99
MSD Pro-Billet Distributors are the finest performance and racing distributors available. Every feature has been engineered to endure the rigors of high performance and racing engines. Whether cruising the streets or racing stock cars, dragsters, boats or trucks, MSD has a distributor for it. MSD uses state-of-the-art, Computer Numerical Controlled (CNC) mills and lathes to machine each housing. After a long series of precise cuts and movements, the billet is formed into a flawless distributor housing that is accurate to within 0.001″. The flex-free housings are lightweight, have no porosity or weak areas and look great on polished, show quality engines.
Product Features:
See More
Product Features:
- CNC machined billet aluminum housing and Dupont Rynite base
- Must Be Used w/An MSD Ignition Control
- Supplied w/Cap; HEI Style Terminals And Rotor
- Nylon pads ensure smooth operation of the advance weights
- Advance weight pins are staked and tig welded to the plate
- Mech. advance assem. can be locked out for crank trigger systems
- Advance plate and weights are fine blanked from chrome moly steel
- QPQ coated for friction reduction
Top-Rated Performance and Racing Products Brands For Your 1979 Mercury Bobcat
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1979 Mercury Bobcats. Below you’ll find some of our best rated Performance and Racing Products from Mallory, B & M, and Accel, and more. Performance and Racing Products from these brands that fit a 1979 Bobcat start at just $45.99 and are rated as high as 4.9 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Mallory 1979 Mercury Bobcat Performance and Racing Products
When it comes to maintaining or upgrading your 1979 Mercury Bobcat, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Mallory ticks all of those boxes. We offer a wide selection of Mallory Performance and Racing Products, specifically designed for the 1979 Mercury Bobcat. With over 1 Mallory brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $92.99. Plus, with over 3 customer reviews and an average rating of 4.9 stars, you can trust that our Mallory Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$92.99
(3)
Unilite Ignition Module
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
Popular B & M 1979 Mercury Bobcat Performance and Racing Products
B & M auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1979 Mercury Bobcat owner should feel confident when installing genuine B & M parts in their vehicle. To ensure the best fit and performance for your 1979 Bobcat, Advance Auto Parts carries a full inventory of 3 B & M Performance and Racing Products. Plus you will be keeping your Mercury in peak condition while saving money because prices on these B & M Performance and Racing Products range from $299.99 to $527.99, plus, with more than 13 customer reviews and an impressive 4.1 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$340.99
(1)
Automatic Shifter, StarShifter
“while I was looking this shifter over and found it wouldn’t work for my application, I found it to be as beautiful as the B&M shifter I had in my othe”
from
$527.99
(1)
Automatic Shifter – Megashifter – Universal
“its was pretty easy to install if u have any type of knowlegde of cars it should not be difficult at all and the shifting is awesome just be careful w”
FAQs for 1979 Mercury Bobcat Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1979 Mercury Bobcats?
Out of 32 Performance and Racing Products that fit 1979 Mercury Bobcats, the following parts are the top sellers:
- Automatic Shifter, Z-Gate (6900216) – $299.99
- Supercoil (5024250) – $114.99
- Thermocap Radiator Cap (10648773) – $54.99
What’s the price range for 1979 Mercury Bobcat Performance and Racing Products?
Performance and Racing Product prices for the 1979 Mercury Bobcat start at $20.99 and go up to $675.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1979 Mercury Bobcat?
The average price for Performance and Racing Products for the 1979 Mercury Bobcat is $342.05. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Mercury Bobcat model years?
What are the cheapest Performance and Racing Products for my 1979 Mercury Bobcat?
The cheapest 1979 Mercury Bobcat Performance and Racing Products we carry in stock are:
- ENGINE ROCKER ARM (50272622) – $20.99
- Hi-Tech 8.300" Long, .080" Wall, 5/16" Diameter Pushrod (50289722) – $22.99
- Super Stock Replacement Coil for Improved Performance, Starting, and Power (5024269) – $45.99
- Thermocap Radiator Cap (10648773) – $54.99
- Performance Cylinder Head Gasket (20680209) – $82.99
What are the top-rated Performance and Racing Products that fit the 1979 Mercury Bobcat?
Out of 140 reviews by customers, our 1979 Mercury Bobcat Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1979 Mercury Bobcat and their top-rated products:
- Performance Ignition Products
- Unilite Ignition Module (17350025) – $92.99
- Super Stock Replacement Coil for Improved Performance, Starting, and Power (5024269) – $45.99
- Performance Shifters
- Unilite Ignition Module (17350025) – $92.99
- Super Stock Replacement Coil for Improved Performance, Starting, and Power (5024269) – $45.99
What types of Performance and Racing Products do you sell for my 1979 Mercury Bobcat?
As of 11/2/25, these are some of the most in-demand types of Performance and Racing Products for a 1979 Mercury Bobcat:
Can I get help with 1979 Mercury Bobcat Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercury Performance and Racing Products and more.
What is your return policy for Mercury Bobcat Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Mercury Bobcat Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
