1979 Jeep J10 Drive Shafts and Axles

More 1979 Jeep J10 Drive Shafts and Axles

Find your specific 1979 Jeep J10 original or aftermarket Drive Shafts and Axles below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1979 Jeep J10 Drive Shafts and Axles

Yukon Gear – Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1350 U/Joint Size (Part No.41021)

Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1350 U/Joint Size

from

$289.99
Yukon replacement yoke for Dana 30, 44, and 50 with 26 spline and a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 30 and 44
  • 26 spline
  • 1350 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.188″ cap diameter
  • Strap style
See More
View Product

Crown Auto Jeep Replacmnt – 1 Piece, Steel (Part No.83503388)

1 Piece, Steel

from

$63.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Easy Installation
See More
View Product

Yukon Gear – Axle Bearing Retainer Plate For Ya D75786-1X & Ya D75786-2X (Part No.33470)

Axle Bearing Retainer Plate For Ya D75786-1X & Ya D75786-2X

from

$17.99
Product Features:
  • Bearing retainer
  • Fits Yukon axle part numbers YA D75786-1X and YA D75786-2X
See More
View Product

Yukon Gear – Axle Bearing Retainer For Dana 44 Rear In Jeep TJ (Part No.33546)

Axle Bearing Retainer For Dana 44 Rear In Jeep TJ

from

$32.99
Product Features:
  • Bearing retainer
  • Fits Dana Spicer 44 in Jeep TJ
  • 1 5/8″ x 3 3/16″ bolt pattern
  • 3/16″ bolt holes
See More
View Product

Spicer – Axle Shft Univ Joint (Part No.5-3226X)

Axle Shft Univ Joint

from

$47.99
Axle Shft Univ Joint
View Product

Spicer – SPICER U-JOINT (Part No.5-1310-1X)

SPICER U-JOINT

from

$44.99
SPICER U-JOINT
View Product

Yukon Gear – Model 20 & Model 35 Axle Stud 1/2"-20 X 1.625" Length, 0.620" Dia – Knurl (Part No.33181)

Model 20 & Model 35 Axle Stud 1/2"-20 X 1.625" Length, 0.620" Dia - Knurl

from

$5.99
Model 20 & Model 35 axle stud 0.620″ Dia. Shank.

Product Features:
  • Axle stud for AMC Model 20 and Model 35
  • 1/2″ x 20 thread
  • 0.620″ knurl diameter
  • 1.625″ long
See More
View Product

Yukon Gear – Replacement Axle Stud For Dana 44 & Model 35 (Part No.33171)

Replacement Axle Stud For Dana 44 & Model 35

from

$5.99
Product Features:
  • Rear axle stud for Dana Spicer 44 and AMC Model 35
  • 1/2″ x 20 thread
  • 0.618″ knurl diameter
  • 1 15/32″ long
  • 31/64″ shoulder length
See More
View Product

Yukon Gear – Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 (Part No.30222)

Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50

from

$182.99
Replacement redi-sleeve yoke saver for Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 .Yukon Mighty seal.

Product Features:
  • Pinion Redi-sleeve
  • Fits Dana Spicer 25, 27, 30, 4 and 50
See More
View Product

Yukon Gear – Model 20 Axle End Play Shim (Part No.55061)

Model 20 Axle End Play Shim

from

$8.99
Model 20 0.005″ axle end play shim.

Product Features:
  • Axle end play shim for AMC Model 20
  • 0.005″ thick
See More
View Product

Yukon Gear – Model 20 Axle End Play Shim (Part No.55060)

Model 20 Axle End Play Shim

from

$9.29
Model 20 0.003″ axle end play shim.

Product Features:
  • Axle end play shim for AMC Model 20
  • 0.003″ thick
See More
View Product

National – Shaft Repair Sleeve (Part No.99125)

Shaft Repair Sleeve

from

$27.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More
View Product

National – Taper Bearing Cup (Part No.14276)

Taper Bearing Cup

from

$10.99
Manufactured with premium-grade steel, National® taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:
  • PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
  • SMOOTH ROTATION — Crowned raceways for even load distribution
  • OE-STYLE DESIGN — Engineered to meet OE specifications
  • COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
  • RIGOROUS TESTING+–+Comprehensive+testing throughout design and development processes by National engineers for quality you can count on+
See More

(1 reviews)
View Product

Yukon Gear – Dana 20 / 44 Axle Bearing And Seal Kit Replacement (Part No.10042)

Dana 20 / 44 Axle Bearing And Seal Kit Replacement

from

$123.99
Yukon replacement axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit (Set10), some flanged, Timken brand, for Dana 44 and Model 20. This axle bearing & seal kit services one side only.

Product Features:
  • Axle bearing and seal kit for Dana 44 rear and Nissan Titan rear
  • Includes axle bearing and seal
  • Services one side
See More
View Product

Yukon Gear – Replacement Axle Bearing And Seal Kit For ’77 To ’91 Dana 44 And Jeep Wagoneer Front Axle (Part No.10033)

Replacement Axle Bearing And Seal Kit For '77 To '91 Dana 44 And Jeep Wagoneer Front Axle

from

$125.99
Yukon replacement axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit for ’77 to ’91 Dana 44 and Jeep Wagoneer front axle. This kit includes Timken inner and outer bearings and races along with high quality seals. Unit is sold per side and is covered for one year against manufacturing defects. This axle bearing & seal kit services one side only.

Product Features:
  • Fits 1977-1991 Jeep Wagoneer
  • Includes axle bearings, races and seal
  • Services one side
See More
View Product

Yukon Gear – Drive Flange Cap For Dana 44 (Part No.32134)

Drive Flange Cap For Dana 44

from

$109.99
Product Features:
  • Drive flange cap
  • Fits Dana 44
See More
View Product

National – Multi Purpose Seal (Part No.2300)

Multi Purpose Seal

from

$32.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More
View Product

Yukon Gear – Mighty Seal (Part No.30083)

Mighty Seal

from

$7.99
Front wheel seal.Yukon Mighty seal.

Product Features:
  • Front wheel bearing seal
  • Fits 1955-1993 GM half ton front
See More
View Product

Pro-King – Axle Seal (Part No.714G076)

Axle Seal

from

$10.29
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More
View Product

Yukon Gear – Replacement Inner Axle Seal For Dana 44 (Flanged Axle) (Part No.30303)

Replacement Inner Axle Seal For Dana 44 (Flanged Axle)

from

$7.99
Replacement inner axle seal for Dana 44 (flanged axle) .Yukon Mighty seal.

Product Features:
  • Inner axle seal
  • Fits Dana Spicer 44 rear with flanged axle
See More
View Product

Dorman – Front Drive Shaft: Greaseable, Adjustable (Part No.938-238)

Front Drive Shaft: Greaseable, Adjustable

from

$883.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More
View Product

Dorman – Front Driveshaft Assembly (Part No.938-319)

Front Driveshaft Assembly

from

$1068.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More
View Product

Dorman – Front Drive Shaft: Greaseable, Adjustable (Part No.938-194)

Front Drive Shaft: Greaseable, Adjustable

from

$785.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More
View Product

Dorman – Front Drive Shaft: Greaseable, Adjustable (Part No.938-233)

Front Drive Shaft: Greaseable, Adjustable

from

$757.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More
View Product

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More
View Product

1979 Jeep J10 Drive Shafts and Axles

Maybe you’re in the middle of a full rebuild of that 1979 Jeep J10. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 27 different Drive Shafts and Axles in our inventory ranging from $5.99 to $883.99. That means you can find the exact parts or products you need to keep that 1979 Jeep J10 running smoothly.

Drive Shafts and Axles are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 1979 Jeep J10. Spicer, Yukon Gear, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Drive Shafts and Axles for your 1979 Jeep J10, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 1979 Jeep J10 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Drive Shafts and Axles Brands To Make Your 1979 Jeep J10 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1979 Jeep J10 demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your J10 the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.

Popular National Drive Shafts and Axles

We carry National parts in our stock across Drive Shaft Bearings categories, plus more. For a 1979 Jeep J10, our most popular National Drive Shafts and Axles include:
Taper Bearing Cup
from $10.99
(1)
Taper Bearing Cup
Drive Shaft Bearings

Top 1979 Jeep J10 Drive Shafts and Axles from Spicer

Spicer products are another trusted brand when it comes to Drive Shafts and Axles for your 1979 Jeep J10. Popular Spicer parts include:
Universal Joint
from $28.99
(12)
Universal Joint
Axle Shaft Universal Joints
Universal Joint
from $51.99
(7)
Universal Joint
Axle Shaft Universal Joints

FAQs for 1979 Jeep J10 Drive Shafts and Axles

What are the most purchased Drive Shafts and Axles for the 1979 Jeep J10?

Out of 27 Drive Shafts and Axles for the 1979 Jeep J10, the most popular in our inventory are:
Dana 44 / 60 And GM 8.5" Inner Front Disconnect Seal Replacement
from $13.99
This product is not rated
Dana 44 / 60 And GM 8.5" Inner Front Disconnect Seal Replacement
Axle Shaft Seals
Model 20 Inner Axle Seal
from $9.99
This product is not rated
Model 20 Inner Axle Seal
Axle Shaft Seals
Model 20 Outer Axle Seal For Tapered Axles
from $10.99
This product is not rated
Model 20 Outer Axle Seal For Tapered Axles
Axle Shaft Seals

More Popular Parts for All Makes