1979 Jeep CJ7 Steering Hardware

Essential 1979 Jeep CJ7 Steering Hardware

MOOG – Tie Rod End Adjusting Sleeve (Part No.ES2004S)

Tie Rod End Adjusting Sleeve

from

$31.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Coated for corrosion resistance
  • Engineered to meet or exceed OE Performance
  • Wrench flats on housing and stud provide easy installation and alignment adjustment.
  • Polished Stud ball provides low socket torque.
  • Stud design is optimized to provide ideal stud swing and strength for each application.
See More

Rare Parts – Tie Rod Sleeve (Part No.RP25522)

Tie Rod Sleeve

from

$21.79
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Complete with clamps
  • Used to set Toe in or out
  • replaces rusted or corroded sleeves
  • Used to connect inner and outer tie rod ends
See More

Rugged Ridge – Drag Link (Part No.18050.55)

Drag Link

from

$241.99
Beef up your ride with Rugged Ridge steering components. This is a bolt-on solution for preventing bent tie rods from wheeling with larger tires. The tubes are 1-1/4 inch ID steel that is cold rolled, pierced, and drawn through dies to produce a 1/4 in. w

Product Features:
  • One Ton Strength
  • 1/4 in. Wall Thickness
  • Uses 7/8 in. Tie Rod Ends
  • True DOM Tubing w/ No Seams
  • Includes Drag Link and Ends
See More

Crown Auto Jeep Replacmnt – Oem Replacement, 28-1/8"Overall Length, With Drag Link/ Tie Rod End/ Adjuster (Part No.J5356105)

Oem Replacement, 28-1/8"Overall Length, With Drag Link/ Tie Rod End/ Adjuster

from

$89.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Improve The Performance
  • Easy Installation
See More

MOOG – Tie Rod End (Part No.ES140R)

Tie Rod End

from

$67.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • ABSORBS IMPACT — Belleville preload washer helps eliminate spring bind and shattering during shock load
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Crown Auto Jeep Replacmnt – Oem Replacement, Pitman Arm To Knuckle, OE Length, With Tube And 2 Ends (Part No.8134350K)

Oem Replacement, Pitman Arm To Knuckle, OE Length, With Tube And 2 Ends

from

$74.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Manufactured From High Quality Material
  • Engineered To The Specifications
  • Meets The Quality Standards
  • Designed For Performance And Durability
  • Easy To Install
See More

Crown Auto Jeep Replacmnt – OE Replacement (Part No.J8132676)

OE Replacement

from

$12.29
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Improve The Performance
  • Easy Installation
See More

Omix – Steering Shaft Boot Kit (Part No.18018.02)

Steering Shaft Boot Kit

from

$28.99
Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too. Omix-ADA offers high quality replaceme

Product Features:
  • Complete Kit
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Crown Auto Jeep Replacmnt – Direct Fit, With Coupler/ Boot/ Snap Ring (Part No.998710K)

Direct Fit, With Coupler/ Boot/ Snap Ring

from

$64.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Improve The Performance
  • Easy Installation
See More

Omix – Steering Shaft Coupling Nut Bearing (Part No.18018.08)

Steering Shaft Coupling Nut Bearing

from

$4.79
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Steel
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Power Steering Coupling (Part No.18018.05)

Power Steering Coupling

from

$39.99
Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too. Omix-ADA offers high quality replaceme

Product Features:
  • Steel
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

1979 Jeep CJ7 Steering Hardware

Maybe you’re in the middle of a full rebuild of that 1979 Jeep CJ7. Maybe you just need a couple of Steering Hardware. Either way, Advance Auto Parts has 9 different Steering Hardware in our inventory ranging from $4.79 to $89.99. That means you can find the exact parts or products you need to keep that 1979 Jeep CJ7 running smoothly.

Steering Hardware are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1979 Jeep CJ7. Moog, Crown Auto Jeep Replacmnt, and Rare are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Steering Hardware for your 1979 Jeep CJ7, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 22 reviews in this category, some of the top rated parts include Steering Shaft Boot Kit with 5.0 stars.

So if you’re in the market for aftermarket Steering Hardware to keep your 1979 Jeep CJ7 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Steering Hardware Brands To Make Your 1979 Jeep CJ7 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1979 Jeep CJ7 demands trusted brand parts and products to keep it running. Many trusted brands of Steering Hardware make up Advance Auto Parts’ inventory, and all are ready to help make your CJ7 the best it can be. Be sure to browse some of our top Steering Hardware brands and parts.

Popular MOOG Steering Hardware

We carry MOOG parts in our stock across Steering Drag Link Adjusting Sleeves categories, plus more. For a 1979 Jeep CJ7, our most popular MOOG Steering Hardware include:
Tie Rod End Adjusting Sleeve
from $31.49
(10)
Tie Rod End Adjusting Sleeve
Steering Drag Link Adjusting Sleeves

FAQs for 1979 Jeep CJ7 Steering Hardware

What are the most purchased Steering Hardware for the 1979 Jeep CJ7?

Out of 9 Steering Hardware for the 1979 Jeep CJ7, the most popular in our inventory are:
Direct Fit, With Coupler/ Boot/ Snap Ring
from $64.99
This product is not rated
Direct Fit, With Coupler/ Boot/ Snap Ring
Steering Coupling Assemblies
Tie Rod Sleeve
from $21.79
This product is not rated
Tie Rod Sleeve
Steering Drag Link Adjusting Sleeves
Tie Rod End
from $67.99
This product is not rated
Tie Rod End
Center and Drag Links

What are the top-rated 1979 Jeep CJ7 Steering Hardware?

Top-rated Steering Hardware for your 1979 Jeep CJ7 based on customer reviews/ratings are:
Steering Shaft Boot Kit
from $28.99
(1)
Steering Shaft Boot Kit
“The Steering Shaft Boot Kit fits and looks like the original parts. I have not driven my Jeep CJ7 enough to check the wear on the parts yet.”