1979 GMC Caballero Belts and Hoses
Find Your Specific 1979 GMC Caballero Belts and Hoses
Below you will find various in-demand GMC Belts and Hoses, components and accessories for your 1979 Caballero. Advance Auto Parts has popular Caballero parts like Fuel Hoses, Serpentine and V Belts, Radiator Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other Caballero model years including
1978,
1980,
1981,
1982,
1983,
1984,
1985,
1986,
1987 and more. Select a category of 1979 GMC Caballero Belts and Hoses below and start saving instantly.
Popular 1979 GMC Caballero Belts and Hoses Categories
Essential Belts and Hoses for 1979 GMC Caballeros
Dayco – Dayco Straight Heater Hose EPDM Rubber, 3/4 Inch Diameter (Sold by foot), 80273 (Part No.80273)
from
$1.29
Dayco Standard Heater Hose is designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine. Note: This hose is NOT suitable for fuel or oil transfer.
See More
Dayco – V-Belt, Top Cog, Dayco, 15418 (Part No.15418)
from
$15.49
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.
See More
Gates – Gates Automotive XL High Capacity V-Belt, 7470 (Part No.7470)
from
$29.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
See More
Yukon Gear – Yukon Gear Seal Puller Tool for Popular Gm, Ford, Toyota, and Dana Differentials, 56063 (Part No.56063)
from
$57.99
Yukon Gear & Axle offers a full line of top quality differential tools to save time and money.
See More
Sniper Motorsports – Sniper Motorsports Sniper Efi – Stock Replacement Fuel Tank – Chevrolet El Camino, 19-583 (Part No.19-583)
from
$281.99
The heart of a fuel system begins with the fuel tank. When building a fuel system, swapping a carb or converting to EFI, it is crucial that you do not contaminate your new parts with dirt, rust, and sludge from an old fuel tank. We offer a simple and inexpensive solution to alleviate fuel tank issues with our Sniper replacement fuel tanks. Sniper fuel tanks are designed to meet or exceed the quality of your factory fuel tank. Sniper tanks are steel with a powder coated finish that are manufactured to the oem specifications for your musclecar, truck, or Jeep. These fuel tanks are the perfect companion for your carbureted power plant or a perfect base for your EFI conversion when installing one of the Holley Muscle Car EFI modules or our Retrofit EFI Pump.
See More
Holley – Holley Fuel Pump Accessories, 12-814 (Part No.12-814)
Holley – Holley Small Block Chevy Mid-Mount Complete Accessory System, 20-240BK (Part No.20-240BK)
from
$2219.99
“The Mid-Mount complete accessory system has all accessories pulled in tighter than other accessory drives. At the heart of the system is a “”bracketless”” design, where the accessories bolt directly to the water pump for a clean, integrated form. The design offers superb engine visibility to show off your horsepower, not your accessories. The Holley designed alternator is just as innovative. This premium alternator utilizes 6-phase technology as found on the C7 Corvette. The water pump also shares its design efficiencies with that of the C7 Corvette. The compact and reliable SD7 A/C compressor and Type II P/S pump with baffled reservoir are also integrated.”
See More
Holley – Holley Small Block Chevy Mid-Mount Complete Accessory System, 20-240 (Part No.20-240)
from
$2149.99
Holley’s Mid-Mount accessory drives are now available for your small block Chevrolet engines! The revolutionary system does what no other accessory bracket system has done€¦ GETS RID OF THE BRACKETS!
See More
Gates – Gates Safety Stripe Standard Straight Heater Hose (Sold by foot), 28409 (Part No.28409)
Gates – Gates Vulco-Flex II Flexible Coolant Hose, 25487 (Part No.25487)
from
$37.99
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
See More
Gates – Gates Premium Molded Coolant Hose, 20827 (Part No.20827)
from
$35.49
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
See More
Dorman – Help – Dorman – Help Carburetor Pre-Heater Hose – 1-1/2 In. x 18 In. – Aluminum, 96020 (Part No.96020)
from
$6.99
This HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.
See More
Dorman – Help – Dorman – Help Carburetor Pre-Heater Hose – 1-3/4 In. x 18 In. – Aluminum, 96022 (Part No.96022)
from
$8.29
This HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.
See More
Dayco – Dayco Straight Heater Hose EPDM Rubber, 5/8 Inch Diameter (Sold by foot), 80271 (Part No.80271)
from
$2.99
Dayco Standard Heater Hose is designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine. Note: This hose is NOT suitable for fuel or oil transfer.
See More
Gates – Gates Molded 90 Degree Heater Hose, 28479 (Part No.28479)
from
$22.99
Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17"" Long, 1.50"" Diameter, D71131" (Part No.D71131)
from
$37.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – Dayco Flex Radiator Hoses EPDM Rubber, 3 Inch Long, 1.5 Inch Inner Dia., 81221 (Part No.81221)
from
$44.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 25"" Long, 1.25"" Diameter, E71080" (Part No.E71080)
from
$15.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20"" Long, 1.50"" Diameter, E70970" (Part No.E70970)
from
$19.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – Dayco Flex Radiator Hoses EPDM Rubber, 27.5 Inch Long, 1.5 Inch Inner Dia., 81211 (Part No.81211)
from
$44.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.
See More
Gates – Gates Vulco-Flex II Flexible Coolant Hose, 25265 (Part No.25265)
from
$68.99
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
See More
Gates – Gates Vulco-Flex II Flexible Coolant Hose, 25530 (Part No.25530)
from
$44.99
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19.50"" Long, 1.50"" Diameter, E71129" (Part No.E71129)
from
$16.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Imperial – "Imperial 1/2"" x 12′ Engine Oil Cooler Hose, 240112" (Part No.240112)
from
$46.99
“1/2″” x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.”
See More
Imperial – Imperial Metal Line Kit for Engine Oil Coolers, 240293 (Part No.240293)
from
$59.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.
See More
Upgrade your 1979 GMC Caballero with Top-Quality Belts and Hoses
When it comes to maintaining or upgrading your 1979 GMC Caballero, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Belts and Hoses are key to keeping your Caballero functioning at its best. At Advance Auto Parts, we offer a wide selection of 69 Belts and Hoses for the 1979 GMC Caballero, designed to meet your needs without breaking the bank.
From
Fuel Hose
replacements to
Serpentine and V Belts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1979 GMC Caballero at great prices.
Our Belts and Hoses inventory for this model
ranges from just $1.29 to $2,219.99, with
an average price of $79.49.
Our 69 Belts and Hoses in stock come from 8 trusted brands, so you’re sure to find the right part for your 1979 GMC Caballero without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1979 GMC Caballero, we stock popular OEM and aftermarket Belts and Hoses from top names
like Dayco, Driveworks, Dorman, and more.
Dayco Belts and Hoses
start at just $19.99 and boast an impressive 4.5 stars average rating from customers.
Driveworks and Dorman also bring quality to the table, with Belts and Hoses available starting at $5.49, and at an average 4.2 stars rating.
With 462 customer reviews and counting, our 1979 GMC Caballero Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1979 GMC Caballero is always ready to roll. We’re committed to providing you with everything you need to keep your Caballero in top shape, all in one place.
Start shopping confidently below for your 1979 GMC Caballero!
Best-Selling Fuel Hoses for 1979 GMC Caballeros
Enhance the driving experience in your GMC with 1 quality Fuel Hose components, starting at $281.99.
Sniper Motorsports – Sniper Motorsports Sniper Efi – Stock Replacement Fuel Tank – Chevrolet El Camino, 19-583 (Part No.19-583)
from
$281.99
The heart of a fuel system begins with the fuel tank. When building a fuel system, swapping a carb or converting to EFI, it is crucial that you do not contaminate your new parts with dirt, rust, and sludge from an old fuel tank. We offer a simple and inexpensive solution to alleviate fuel tank issues with our Sniper replacement fuel tanks. Sniper fuel tanks are designed to meet or exceed the quality of your factory fuel tank. Sniper tanks are steel with a powder coated finish that are manufactured to the oem specifications for your musclecar, truck, or Jeep. These fuel tanks are the perfect companion for your carbureted power plant or a perfect base for your EFI conversion when installing one of the Holley Muscle Car EFI modules or our Retrofit EFI Pump.
See More
Most Popular 1979 GMC Caballero Serpentine and V Belts
Customize your GMC with 46 Serpentine and V Belts products
like V-Belts,
Pullers, and
Drive Belts, all
priced under $2,219.99.
Dayco – Dayco Bottom Cog V-Belt 45 Inch Long, Exact Fit Premium Quality, 15450 (Part No.15450)
from
$29.99
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.
See More
Dayco – Dayco Bottom Cog V-Belt 37 Inch Long, Exact Fit Premium Quality, 15370 (Part No.15370)
from
$19.99
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.
See More
Dayco – Dayco Bottom Cog V-Belt 45.5 Inch Long, Exact Fit Premium Quality, 15455 (Part No.15455)
from
$20.29
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.
See More
Dayco – Dayco Bottom Cog V-Belt 46 Inch Long, Exact Fit Premium Quality, 15460 (Part No.15460)
from
$28.99
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.
See More
Dayco – Dayco Bottom Cog V-Belt 54.5 Inch Long, Exact Fit Premium Quality, 15545 (Part No.15545)
from
$23.99
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.
See More
Dayco – Dayco Bottom Cog V-Belt 56 Inch Long, Exact Fit Premium Quality, 15560 (Part No.15560)
from
$23.99
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.
See More
Driveworks – Automotive V-Belt, Driveworks, 37015 (Part No.37015)
from
$5.49
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.
See More
Driveworks – Automotive V-Belt, Driveworks, 45013 (Part No.45013)
from
$5.49
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.
See More
Driveworks – Automotive V-Belt, Driveworks, 46013 (Part No.46013)
from
$5.49
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.
See More
Driveworks – Automotive V-Belt, Driveworks, 48013 (Part No.48013)
from
$5.49
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.
See More
Driveworks – Automotive V-Belt, Driveworks, 55515 (Part No.55515)
from
$5.29
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.
See More
Driveworks – Automotive V-Belt, Driveworks, 49013 (Part No.49013)
from
$5.29
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.
See More
Driveworks – Automotive V-Belt, Driveworks, 54515 (Part No.54515)
from
$4.99
Driveworks engineered to conform to high mileage, worn or misaligned drives without a sacrifice in quiet, long-lasting performance. Constructed with Aramid reinforced EPDM compounds, it delivers more than OE required quality… it delivers the solution to troublesome drive problems. Driveworks Poly-Rib Belts meet or exceed SAE J1459 and SAE J2432 specifications.
See More
Dayco – Dayco Bottom Cog V-Belt 43 Inch Long, Exact Fit Premium Quality, 15430 (Part No.15430)
from
$28.99
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.
See More
Dayco – Dayco Bottom Cog V-Belt 40.5 Inch Long, Exact Fit Premium Quality, 15405 (Part No.15405)
from
$16.79
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.
See More
Dayco – V-Belt, Top Cog, Dayco, 15480 (Part No.15480)
from
$21.29
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.
See More
Dayco – V-Belt, Top Cog, Dayco, 15465 (Part No.15465)
from
$24.49
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.
See More
Driveworks – Automotive V-Belt, Driveworks, 44515 (Part No.44515)
from
$5.49
Driveworks engineered to conform to high mileage, worn or misaligned drives without a sacrifice in quiet, long-lasting performance. Constructed with Aramid reinforced EPDM compounds, it delivers more than OE required quality… it delivers the solution to troublesome drive problems. Driveworks Poly-Rib Belts meet or exceed SAE J1459 and SAE J2432 specifications.
See More
Driveworks – Automotive V-Belt, Driveworks, 43013 (Part No.43013)
from
$5.29
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.
See More
Dayco – Dayco Bottom Cog V-Belt 44.5 Inch Long, Exact Fit Premium Quality, 15445 (Part No.15445)
from
$32.99
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.
See More
Driveworks – Automotive V-Belt, Driveworks, 42013 (Part No.42013)
from
$5.29
Driveworks engineered to conform to high mileage, worn or misaligned drives without a sacrifice in quiet, long-lasting performance. Constructed with Aramid reinforced EPDM compounds, it delivers more than OE required quality… it delivers the solution to troublesome drive problems. Driveworks Poly-Rib Belts meet or exceed SAE J1459 and SAE J2432 specifications.
See More
Driveworks – Automotive V-Belt, Driveworks, 40515 (Part No.40515)
from
$5.49
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.
See More
Driveworks – Driveworks Automotive V-Belt: 47.07 Outer Circumference, 46.5 Effective Length, 0.44 Top Width, 46513 (Part No.46513)
from
$5.29
Engineered to conform to high mileage, worn or misaligned drives without a sacrifice in quiet, long-lasting performance. Constructed with Aramid reinforced EPDM compounds, it delivers more than OE required quality… it delivers the solution to troublesome drive problems. Driveworks Poly-Rib Belts meet or exceed SAE J1459 and SAE J2432 specifications.
See More
Dayco – Dayco Bottom Cog V-Belt 42 Inch Long, Exact Fit Premium Quality, 15420 (Part No.15420)
from
$21.79
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.
See More
Top Picks for 1979 GMC Caballero Radiator Hoses
Upgrade GMC Caballeros with top-quality Radiator Hoses parts, including 9 OEM and aftermarket selections for your 1979 model.
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 24"" Long, 1.50"" Diameter, E70935" (Part No.E70935)
from
$52.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20"" Long, 1.50"" Diameter, E70970" (Part No.E70970)
from
$19.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16.50"" Long, 1.50"" Diameter, D70649" (Part No.D70649)
from
$35.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – Dayco Flex Radiator Hoses EPDM Rubber, 3 Inch Long, 1.5 Inch Inner Dia., 81221 (Part No.81221)
from
$44.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 23"" Long, 1.50"" Diameter, E71083" (Part No.E71083)
from
$16.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Gates – Gates Premium Molded Coolant Hose, 21211 (Part No.21211)
from
$36.49
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
See More
Gates – Gates Vulco-Flex II Flexible Coolant Hose, 25532 (Part No.25532)
from
$45.99
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
See More
Gates – Gates Premium Molded Coolant Hose, 20687 (Part No.20687)
from
$34.49
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
See More
Dayco – Dayco Straight Heater Hose EPDM Rubber, 3/4 Inch Diameter (Sold by foot), 80273 (Part No.80273)
from
$1.29
Dayco Standard Heater Hose is designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine. Note: This hose is NOT suitable for fuel or oil transfer.
See More
In-Demand Engine Cooling Hoses for 1979 GMC Caballeros
Select from 9 premium Engine Cooling Hoses parts for your 1979 GMC Caballero, with prices ranging from $2.99 to $44.99.
Dayco – Dayco Flex Radiator Hoses EPDM Rubber, 23.81 Inch Long, 1.5 Inch Inner Dia., 81491 (Part No.81491)
from
$18.49
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.
See More
Dayco – Dayco Flex Radiator Hoses EPDM Rubber, 27.5 Inch Long, 1.5 Inch Inner Dia., 81211 (Part No.81211)
from
$44.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.
See More
Gates – Gates Safety Stripe Standard Straight Heater Hose (Sold by foot), 28409 (Part No.28409)
Gates – Gates Vulco-Flex II Flexible Coolant Hose, 25530 (Part No.25530)
from
$44.99
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
See More
Gates – Gates Vulco-Flex II Flexible Coolant Hose, 25487 (Part No.25487)
from
$37.99
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
See More
Gates – Gates Premium Molded Coolant Hose, 20827 (Part No.20827)
from
$35.49
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
See More
Gates – Gates Premium Molded Coolant Hose, 21061 (Part No.21061)
from
$22.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
See More
Gates – Gates Safety Stripe Standard Straight Heater Hose (Sold by foot), 28412 (Part No.28412)
Gates – Gates Safety Stripe Standard Straight Heater Hose (Sold by foot), 28411 (Part No.28411)
Most Sold 1979 GMC Caballero Heater Hoses
Explore our best-selling GMC parts for the 1979 Caballero among 1 OEM and aftermarket options starting from $2.99.
Dayco – Dayco Straight Heater Hose EPDM Rubber, 5/8 Inch Diameter (Sold by foot), 80271 (Part No.80271)
from
$2.99
Dayco Standard Heater Hose is designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine. Note: This hose is NOT suitable for fuel or oil transfer.
See More
Top-Rated Belts and Hoses Brands For Your 1979 GMC Caballero
Shop for the best-rated brands offering Belts and Hoses and other products for your 1979 GMC Caballeros. Below you’ll find some of our best rated Belts and Hoses from Dayco, Driveworks, and Dorman, and more. Belts and Hoses from these brands that fit a 1979 Caballero start at just $5.49 and are rated as high as 4.5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.
Popular Dayco 1979 GMC Caballero Belts and Hoses
When it comes to maintaining or upgrading your 1979 GMC Caballero, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 1979 GMC Caballero. With over 3 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $19.99, with an average price of just $34.32. Plus, with over 25 customer reviews and an average rating of 4.5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$29.99
(9)
Dayco Bottom Cog V-Belt 45 Inch Long, Exact Fit Premium Quality, 15450
“Put it on my 1953 Chevy Bel Air around the vintage air conditioning, the camshaft and crankshaft pulleys”
from
$19.99
(8)
Dayco Bottom Cog V-Belt 37 Inch Long, Exact Fit Premium Quality, 15370
“I ORDERED THIS AS A REPLACEMENT BELT FOR A MERCRUISER 3.0. I WAS ABLE TO IDENTIFY THE BELT BY LOOKING UP THE NUMBER AND MANUFACTURER FROM THE OLD BEL”
from
$52.99
(8)
"Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 24"" Long, 1.50"" Diameter, E70935"
“Quality hose! Perfect fit! Just what I was looking for!”
Popular Driveworks 1979 GMC Caballero Belts and Hoses
Driveworks auto parts is one of the highest quality Belts and Hose brands in the market. Any 1979 GMC Caballero owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 1979 Caballero, Advance Auto Parts carries a full inventory of 3 Driveworks Belts and Hoses. Plus you will be keeping your GMC in peak condition while saving money because prices on these Driveworks Belts and Hoses range up to $5.49, plus, with more than 4 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.
FAQs for 1979 GMC Caballero Belts and Hoses
Which Belts and Hoses are best-sellers for 1979 GMC Caballeros?
Out of 69 Belts and Hoses that fit 1979 GMC Caballeros, the following parts are the top sellers:
- Gates Safety Stripe Standard Straight Heater Hose (Sold by foot), 28409 (10504844) – $2.99
- Dayco Straight Heater Hose EPDM Rubber, 5/8 Inch Diameter (Sold by foot), 80271 (10844721) – $2.99
- Dayco Bottom Cog V-Belt 43 Inch Long, Exact Fit Premium Quality, 15430 (3300044) – $28.99
What’s the price range for 1979 GMC Caballero Belts and Hoses?
Belts and Hose prices for the 1979 GMC Caballero start at $1.29 and go up to $2,219.99 for the most premium parts.
What’s the average price of a Belts and Hose for a 1979 GMC Caballero?
The average price for Belts and Hoses for the 1979 GMC Caballero is $79.49. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Belts and Hoses for other GMC Caballero model years?
What are the cheapest Belts and Hoses for my 1979 GMC Caballero?
The cheapest 1979 GMC Caballero Belts and Hoses we carry in stock are:
- Dayco Straight Heater Hose EPDM Rubber, 3/4 Inch Diameter (Sold by foot), 80273 (10844595) – $1.29
- Gates Safety Stripe Standard Straight Heater Hose (Sold by foot), 28409 (10504844) – $2.99
- Dayco Straight Heater Hose EPDM Rubber, 5/8 Inch Diameter (Sold by foot), 80271 (10844721) – $2.99
- Gates Safety Stripe Standard Straight Heater Hose (Sold by foot), 28411 (10505038) – $3.99
- Automotive V-Belt, Driveworks, 54515 (5060613) – $4.99
What are the top-rated Belts and Hoses that fit the 1979 GMC Caballero?
Out of 462 reviews by customers, our 1979 GMC Caballero Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 1979 GMC Caballero and their top-rated products:
- Radiator Hoses
- "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20"" Long, 1.50"" Diameter, E70970" (5192110) – $19.49
- "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 24"" Long, 1.50"" Diameter, E70935" (5192048) – $52.99
- "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16.50"" Long, 1.50"" Diameter, D70649" (5190657) – $35.99
- Serpentine and V Belts
- "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20"" Long, 1.50"" Diameter, E70970" (5192110) – $19.49
- "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 24"" Long, 1.50"" Diameter, E70935" (5192048) – $52.99
- "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16.50"" Long, 1.50"" Diameter, D70649" (5190657) – $35.99
- Duct Hoses
- "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20"" Long, 1.50"" Diameter, E70970" (5192110) – $19.49
- "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 24"" Long, 1.50"" Diameter, E70935" (5192048) – $52.99
- "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16.50"" Long, 1.50"" Diameter, D70649" (5190657) – $35.99
What types of Belts and Hoses do you sell for my 1979 GMC Caballero?
As of 8/2/26, these are some of the most in-demand types of Belts and Hoses for a 1979 GMC Caballero:
Can I get help with 1979 GMC Caballero Belts and Hose orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Belts and Hoses and more.
What is your return policy for GMC Caballero Belts and Hoses?
Advance Auto Parts keeps returns simple. For new GMC Caballero Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
