1979 GMC C3500 Body Parts

For the heavy-duty hauler and hardworking trailer blazer, a headache rack is a must-have truck accessory. It does not take much for a two-by-four, steel pipe or other loose cargo to put a good size crack in the rear window of your truck cab, especially when you stick to the off-road trail more than the paved road. The ARIES classic headache rack offers a hardy design and sturdy structure to make sure your truck is ready to work. Made from 1″ x 2″ carbon steel tubing, ARIES classic headache racks provide excellent protection for your truck cab, from both the heat of the sun and potential impact from unsecure cargo in your truck bed. The full louvers help keep your cab cooler throughout the day, and their heavy-duty construction helps block any damage from behind. The ARIES classic headache rack also features a dual-layer E-coat and semi-gloss black powder coat finish to maintain its sleek appearance, preventing damage from rust, scratches and UV rays. Installation is quick and easy with the ARIES headache rack. It is compatible with cross-bed truck tool boxes and includes all necessary hardware for a complete installation. When your pickup truck is more than just a show horse, ARIES has you covered. We understand that it’s about more than goofing off in the mud. When you have a job to finish and a workhorse to drive, an ARIES classic headache rack is a reliable tool in your belt.

Product Features:

• Heavy-duty 1″ x 2″ steel tube construction for a solid frame
• Dual-layer E-coat and black powder coat finish for maximum corrosion resistance
• Fully louvered center section to protect the cab and passengers
• Louvers also help keep the cab cooler by blocking direct sunlight
• Flat steel brackets bolt onto the truck bed walls (drilling may be required)
• Compatible with most crossover truck tool boxes

New Goodmark Door Weatherstrip Kit, Consists Of Weatherstrips, Felts, And Glass Run Channels

Product Features:

• Consists Of Weatherstrips Felts And Glass Run Channels
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Fey Surestep Bumpers are non-OE design bumpers with a full size tongue weight of 800 lbs and trailer weight of 8,000 lbs. Surestep Bumpers are built for full size trucks and offer a molded polymer step surface for easy access to your vehicle. Product is a

Product Features:

• Cold Rolled Brite Steel
• OE Style Steel Step Plate
• Molded Polymer Surface
• Mount Kit Sold Separately
• 3 Year Warranty

New Standard Replacement Driver Or Passenger Side Bed Floor Support, 71.63 X 4.5 X 3.13 Inches

Product Features:

• 71.63 X 4.5 X 3.13 Inches, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Prone is a high performance tailgate net that adds a sporty aerodynamic style to your truck and increases air flow through your truck bed. Prune’s are known to improve gas mileage by eliminating wind drag. Easily installs with four mounting holes, resulting in a perfectly flat, sag-free net. Complements and fits most pickups. Constructed from heavy duty 22 oz vinyl-coated polyester fabric with stainless steel mounting hardware for long lasting durability.

Product Features:

• The Leader In Quality & Fit & Finish
• Patented Sag-free Design
• Only Four Holes Needed for Installation
• Best Looking Even-Tensioning Design
• ProRunner
• 18 in height x 59.75 in width

DogBx

New Standard Replacement Driver Side Rear Slip-On Fender Section, 41 5/8 X 12

Product Features:

• 41 5/8 X 12, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Fey Sure-Step Deluxe Bumpers are non-OE design bumpers with a full size tongue weight of 800 lbs and 8,000 lbs trailer weight. Sure-Step Deluxe bumpers are for full size trucks and offer a molded polymer step surface for truck owners. Product available in

Product Features:

• Cold Rolled Brite Steel
• OE Style Steel Step Plate
• Molded Polymer Surface
• Mount Kit Sold Separately
• Molded Flange
• 3 Year Warranty

Beltline Kit Cargo Door/Rear Gate, Inner + Outer-2pcs

New Goodmark Bed Cross Sill For Stepside Pickups, 3 Required For Short Bed Models, 5 Required For Long Bed Models

Product Features:

• 3 Required For Short Bed Models 5 Required For Long Bed Models
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Driver Side Cab Corner, Slip-On Type, 2 Door Regular Cab, 4.75 X 16

Product Features:

• Slip-On Type, 2 Door Regular Cab, 4.75 X 16, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Goodmark Driver And Passenger Side Pair Of Tailgate Link Rods, For Fleetside Models

Product Features:

• For Fleetside Models
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Driver Side Upper Wheel Arch Patch, 41 X 12 X 2

Product Features:

• 41 X 12 X 2, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Want a new interior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

• Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
• Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
• Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
• Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

New Goodmark Door Hinge Repair Kit To Repair 2 Front Doors

Product Features:

• Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

This door hinge bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this door hinge bushing matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:

• Assures Longer Lasting Cab to Bed Alignment
• Replace to Restore Ride Height
• Gain Durability
• Stronger Than Original Rubber Mounts

New Standard Replacement Front Driver Side Wheel Opening Molding

Product Features:

• Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Goodmark Driver Side Tailgate Post Patch, For Fleetside Models

Product Features:

• For Fleetside Models
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Truck Cab Cooler protects the cockpit area from UV rays and helps reduce heat build-up inside the vehicle. Easy to install, Cab Coolers use hook and loop fasteners under the mirrors and door handles (varies by model). Some patterns include adjustable webbing straps to wheel wells to securely hold the cover in place. Custom patterned for trucks and SUV’s.

Product Features:

• Protects Cab Area From UV & Heat Build-up
• Also Good For Snow & Ice Protection
• Easy to Install
• Stow Behind Seat

New Standard Replacement Passenger Side Rocker Panel Backing Plate, 33 1/2 X 6 1/2

Product Features:

• 33 1/2 X 6 1/2, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Driver Or Passenger Side Rear Cab Body Mount, 1/2 Ton 4WD, All 3/4 Ton And 1 Ton Models, Use 2 Per Truck

Product Features:

• 1/2 Ton 4WD All 3/4 Ton And 1 Ton Models Use 2 Per Truck
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

This door hinge is designed to match the function of an original equipment hinge on specified vehicles. It is engineered to securely connect a door and door frame to help restore proper door operation and replace a rusted, failed, or damaged hinge.

Product Features:

• Direct replacement – this door hinge is designed to match the fit, function and performance of an original equipment hinge on specified vehicles
• Ideal solution – engineered to securely connect a door and door frame to help restore proper door operation, and seamlessly replace a rusted, failed, or damaged hinge
• Durable construction – designed and manufactured to strict specifications for reliable performance
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

• Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
• Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
• Excellent value – original equipment quality at a lower price
• Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

This window regulator hardware kit is designed to match the original hardware required to service or install the window regulator on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this window regulator hardware kit is designed to match the original hardware required to service or install the window regulator on specified vehicles
• Ideal solution – this kit is a reliable replacement for original components that have been lost or broken
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

New Standard Replacement Passenger Side Rocker Panel, Standard Cab, 52 X 10

Product Features:

• Standard Cab Models, 52 X 10, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Goodmark Passenger Side Lower Front Quarter Panel Patch, 7 3/4 Inches Wide X 14 1/2 Inches High

Product Features:

• 7 3/4 Inches Wide X 14 1/2 Inches High
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Flocked Window Channel (Imported). Pair.

Product Features:

• Jet black to match the color of the original part
• Dense rubber flocked to match the original
• Exact fit
• High quality original equipment replacement part