1979 GMC C3500 Air Intakes
Find Your Specific 1979 GMC C3500 Air Intakes
Below you will find various in-demand GMC Air Intakes, components and accessories for your 1979 C3500. Advance Auto Parts has popular C3500 parts like Carburetor Kits, Air Cleaner Parts, Carburetor Parts and more. You’ll also find aftermarket and OEM Air Intakes for other C3500 model years including
1991,
1992,
1993,
1994,
1995,
1996,
1997,
1998,
1999 and more. Select a category of 1979 GMC C3500 Air Intakes below and start saving instantly.
Popular 1979 GMC C3500 Air Intakes Categories
Essential Air Intakes for 1979 GMC C3500s
Wells Vehicle Electronics – Wells Vehicle Electronics Carburetor Repair Kit, 2G1852 (Part No.2G1852)
from
$79.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More
Edelbrock – Edelbrock Performer Series Carburetor Calibration Kit, Helps get the best performance, 1487 (Part No.1487)
Felpro – Felpro Engine Intake Manifold Gasket Set, MS 90131 (Part No.MS 90131)
from
$47.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
See More
Holley – Holley Performance and Race Carburetor: 600 CFM, Manual Choke, 4 Barrel, Square Bore, Dual Inlet, 0-4776C (Part No.0-4776C)
from
$799.99
The Ultra Double Pumper Carburetors feature all aluminum construction and are equipped with metering blocks and a base plate made from 6061-T6 billet aluminum. Three different anodized color options (Red, Blue, or Black) allow for a personalized look while maintaining the ultra high strength and durability you get from billet. They weigh in at approximately 5 lbs less than a comparable zinc carburetor. The new Ultra Double Pumper Carburetors have an enhanced fuel curve for optimum performance, with many more features such as aluminum construction; anodized billet aluminum metering blocks and base plate; 4 corner idle for precise idle control; mechanical secondaries for great performance; clear fuel level sight plugs for easy, no mess fuel level adjustments; Ford automatic transmission kickdown for use on popular Ford transmissions; four vacuum ports for all necessary vacuum accessories; and for the first time on a Double Pumper, factory pre-set electric choke for easy, fast cold start-ups. The clean, polished look coupled with Red, Blue, or Black metering blocks and throttle body will certainly set your ride apart whether you are at the show or track. Dont trust your performance to just anyone, Holley is the only Modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60s.
See More
Edelbrock – Edelbrock Carburetor Accelerator Pump, 12401 (Part No.12401)
from
$33.99
Edelbrock No: 12401 50cc Accelerator Pump Diaphragm for 4150 Carburetors. Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage
See More
Victor Reinz – Victor Reinz Air Cleaner Mounting Gasket, 71-13854-00 (Part No.71-13854-00)
from
$3.49
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
See More
Edelbrock – Edelbrock Fuel Bowl Gaskets for Holley Carburetors, Direct replacement for proper fit, 12382 (Part No.12382)
from
$16.99
The Edelbrock No. 12382 fuel bowl gasket is designed for Holley 2300, 4150, 4160, 4175 and 4500 carburetors. Kit includes two black nitrile fuel bowl gaskets.
See More
Gates – Gates Defroster/Air Intake Hose (Sold by foot), 23848 (Part No.23848)
from
$17.49
For defrosters, air ducts, air intakes, under-hood applications and other low pressure, low suction applications. Approved for marine applications.
See More
Edelbrock – Edelbrock EGR Valve Adapter, 1476 (Part No.1476)
from
$88.99
Edelbrock EGR Adapter No: 1476 has made installing your new intake and carburetor easier when using part No: 3701 and No: 3706. When using Edelbrock EGR adapters, your existing EGR valve is repositioned to allow clearance for your carburetor. They’re made of cast aluminum and come complete with gaskets and bolts.
See More
Edelbrock – Edelbrock Transfer Tube O-Rings No. 12416 For Holley No. 4150, No. 4160, No. 4165, And No. 4175 Carbs (Part No.12416)
from
$12.99
Edelbrock Transfer Tube O-Rings Pair No. 12416 Will Fit Holley 4150, 4160, 4165 &4175 Series Carb
See More
Edelbrock – Edelbrock Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip (Part No.12605)
from
$22.99
Edelbrock Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip.
See More
Edelbrock – Edelbrock Standard Flow Carburetor Power Valve No. 12685 Single Stage 8.5in Hg (Part No.12685)
from
$17.99
The Edelbrock No. 12685 Single Stage 8.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate. During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation and bogging, ensuring the smooth delivery of power without any drivability concerns.
See More
Felpro – Felpro Carburetor Mounting Gasket, 60249 (Part No.60249)
from
$7.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More
Edelbrock – Edelbrock Carburetor Progressive Throttle Linkage Kit, 1033 (Part No.1033)
from
$196.99
Be sure to always check that the arms will not become inverted after any adjustment. Some trial and error will be required to achieve a properly balanced set up.
See More
Edelbrock – Edelbrock Carburetor Vacuum Secondary Spring Kit, 12412 (Part No.12412)
from
$26.99
The Edelbrock No: 12412 Vacuum Secondary Spring Kit includes 7 springs that will fit on Holley 4150, 4150HP, 4160 series and various Demon Carburetors.
See More
ARP Auto Racing – "ARP Auto Racing For Use With Chevy 265/ 400 Cubic"", 12 Point Head Type, Polished, With Washers, 434-2101" (Part No.434-2101)
from
$60.99
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.
See More
Felpro – Felpro Carburetor Choke Tube Gasket, 72591 (Part No.72591)
from
$4.49
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More
Edelbrock – Edelbrock Carburetor Accelerator Pump, 12403 (Part No.12403)
from
$43.99
“The Edelbrock No: 12403 Accelerator Pump Cam Kit Assortment Package of 8. These accelerator pump cams will have different shapes and profiles, allowing you to fine tune the accelerator pump’s performance to the engine’s requirements. Cam “”lift”” will directly affects the accelerator pump stroke and pump capacity. While the cam ramp profile and/or shape will control the “”timing”” of the shot. Each kit comes with 8 different accelerator pump cams and will fit Holley 2300, 4150 and 4160 carburetors.”
See More
Dorman – Dorman Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In., 02604 (Part No.02604)
from
$9.49
This engine intake manifold expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
See More
Dorman – Help – Dorman – Help Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In., 10232 (Part No.10232)
from
$5.99
Our Engine Intake Manifold Expansion Plug is conveniently designed as a direct replacement for stripped plugs. A proper fit is ensured, every time.
See More
Edelbrock – Edelbrock Standard Main Jet Carburetor Metering Jet Size .080 (Pair), 12480 (Part No.12480)
from
$14.99
“The Edelbrock 94 No. 12480 Carburetor Jets .080″”Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.”
See More
Edelbrock – Edelbrock Standard Main Jet Carburetor Metering Jet Size .073 (Pair), 12470 (Part No.12470)
from
$14.99
“The Edelbrock 94 No. 12470 Carburetor Jets .070″”Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.”
See More
Edelbrock – "Edelbrock Pro-Flo Chrome 14"" Round Air Cleaner with 3"" Paper Element (Deep Flange), 1221" (Part No.1221)
from
$46.99
“Edelbrock triple chrome-plated round air cleaner No: 1221 works with all popular 5-1/8″” diameter carburetors (Performer Series, Thunder Series AVS, Holley, Thermo-Quad, Quadra jet and Carter AFB). The 10″” and 14″” models have knock-outs in the air cleaner base for use with Edelbrock crank case ventilation adapter No: 1205 (sold separately). No: 1208, No: 1209 and No: 1221 fit all Edelbrock carburetors. Heights of air cleaners are in parentheses, measured from the gasket flange to the top of the supplied retaining nut. Dimensions are accurate within 1/8″”.”
See More
Edelbrock – "Edelbrock Pro-Flo Black 14"" Round Air Cleaner with 3"" Paper Element (Deep Flange), 1223" (Part No.1223)
from
$50.99
“Edelbrock triple chrome-plated round air cleaner No: 1223 works with all popular 5-1/8″” diameter carburetors (Performer Series, Thunder Series AVS, Holley, Thermo-Quad, Quadra jet and Carter AFB). The 10″” and 14″” models have knock-outs in the air cleaner base for use with Edelbrock crank case ventilation adapter No: 1205 (sold separately). No: 1208, No: 1209 and No: 1221 fit all Edelbrock carburetors. Heights of air cleaners are in parentheses, measured from the gasket flange to the top of the supplied retaining nut. Dimensions are accurate within 1/8″”.”
See More
Edelbrock – Edelbrock Fuel Bowl Inverted Flare Fuel Inlet Fitting #12415 (Part No.12415)
Edelbrock – Edelbrock Performer Intake Manifold for 1955-86 Small-Block Chevy, Satin Finish, 2101 (Part No.2101)
from
$279.99
Edelbrock Performer Intake Manifold for 1955-86 Small-Block Chevy, Satin Finish, 2101.
See More
Edelbrock – Edelbrock Performer EPS Manifold with Oil Fill Tube for Small-Block Chevy, Polished Finish, 27031 (Part No.27031)
from
$645.99
“Edelbrock part No. 27031 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response. This Performer EPS intake manifold combines a modern runner design with a front mounted oil fill tube for those who want the vintage look of our Classic valve covers with no breathers. Includes Oil Fill Tube (not installed) and matching push-in breather cap. The Oil Fill Tube and Breather are also available separately as No. 4803. This intake manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. This small-block Chevy manifold has a runner design that’s “”tuned”” for peak torque at 3500 rpm on a 350-inch engine and it’s ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft.-lbs. of torque over the Edelbrock Performer intake manifold No. 21011 on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft.-lbs. of torque for more performance where you need it most. This manifold offers a polished finish for a brilliant shine and classic look.”
See More
Edelbrock – Edelbrock Performer 2-O Intake Manifold for 1965-90 Big-Block Chevy w/Oval Port Heads, 2161 (Part No.2161)
from
$387.99
Edelbrock Performer 2-O Intake Manifold for 1965-90 Big-Block Chevy w/Oval Port Heads, 2161.
See More
Upgrade your 1979 GMC C3500 with Top-Quality Air Intakes
When it comes to maintaining or upgrading your 1979 GMC C3500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Air Intakes are key to keeping your C3500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 131 Air Intakes for the 1979 GMC C3500, designed to meet your needs without breaking the bank.
From
Carburetor Kit
replacements to
Air Cleaner Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Air Intakes for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Air Intakes for your 1979 GMC C3500 at great prices.
Our Air Intakes inventory for this model
ranges from just $3.49 to $1,949.99, with
an average price of $527.38.
Our 131 Air Intakes in stock come from 12 trusted brands, so you’re sure to find the right part for your 1979 GMC C3500 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1979 GMC C3500, we stock popular OEM and aftermarket Air Intakes from top names
like Felpro, Edelbrock, Holley, and more.
Felpro Air Intakes
start at just $4.49 and boast an impressive 4.6 stars average rating from customers.
Edelbrock and Holley also bring quality to the table, with Air Intakes available starting at $13.99, and at an average 4.4 stars rating.
With 534 customer reviews and counting, our 1979 GMC C3500 Air Intakes have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Air Intake upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1979 GMC C3500 is always ready to roll. We’re committed to providing you with everything you need to keep your C3500 in top shape, all in one place.
Start shopping confidently below for your 1979 GMC C3500!
Best-Selling Carburetor Kits for 1979 GMC C3500s
Enhance the driving experience in your GMC with 7 quality Carburetor Kit components, starting at $16.99.
Edelbrock – Edelbrock Fuel Bowl Gaskets for Holley Carburetors, Direct replacement for proper fit, 12382 (Part No.12382)
from
$16.99
The Edelbrock No. 12382 fuel bowl gasket is designed for Holley 2300, 4150, 4160, 4175 and 4500 carburetors. Kit includes two black nitrile fuel bowl gaskets.
See More
Edelbrock – Edelbrock Carburetor Repair Kit #12750 Fits Most Holley 4160 Carburetors (Part No.12750)
Edelbrock – Edelbrock Carburetor Repair Kit #12760 Fits Most Holley 4150 Carburetors (Part No.12760)
Wells Vehicle Electronics – Wells Vehicle Electronics Carburetor Repair Kit, 2G1852 (Part No.2G1852)
from
$79.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More
Wells Vehicle Electronics – Wells Vehicle Electronics Carburetor Repair Kit, 2G1752 (Part No.2G1752)
from
$33.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More
Wells Vehicle Electronics – Wells Vehicle Electronics Carburetor Repair Kit, 2G1739 (Part No.2G1739)
from
$25.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More
Wells Vehicle Electronics – Wells Vehicle Electronics Carburetor Repair Kit, 2G1742 (Part No.2G1742)
from
$24.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More
Most Popular 1979 GMC C3500 Air Cleaner Parts
Customize your GMC with 4 Air Cleaner Parts products
like Air Cleaner Mount Gaskets and
Air Cleaner Assemblies, all
priced under $50.99.
Felpro – Felpro Air Cleaner Mounting Gasket, 60038 (Part No.60038)
from
$4.49
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More
Edelbrock – "Edelbrock Pro-Flo Black 14"" Round Air Cleaner with 3"" Paper Element (Deep Flange), 1223" (Part No.1223)
from
$50.99
“Edelbrock triple chrome-plated round air cleaner No: 1223 works with all popular 5-1/8″” diameter carburetors (Performer Series, Thunder Series AVS, Holley, Thermo-Quad, Quadra jet and Carter AFB). The 10″” and 14″” models have knock-outs in the air cleaner base for use with Edelbrock crank case ventilation adapter No: 1205 (sold separately). No: 1208, No: 1209 and No: 1221 fit all Edelbrock carburetors. Heights of air cleaners are in parentheses, measured from the gasket flange to the top of the supplied retaining nut. Dimensions are accurate within 1/8″”.”
See More
Edelbrock – "Edelbrock Pro-Flo Chrome 14"" Round Air Cleaner with 3"" Paper Element (Deep Flange), 1221" (Part No.1221)
from
$46.99
“Edelbrock triple chrome-plated round air cleaner No: 1221 works with all popular 5-1/8″” diameter carburetors (Performer Series, Thunder Series AVS, Holley, Thermo-Quad, Quadra jet and Carter AFB). The 10″” and 14″” models have knock-outs in the air cleaner base for use with Edelbrock crank case ventilation adapter No: 1205 (sold separately). No: 1208, No: 1209 and No: 1221 fit all Edelbrock carburetors. Heights of air cleaners are in parentheses, measured from the gasket flange to the top of the supplied retaining nut. Dimensions are accurate within 1/8″”.”
See More
Victor Reinz – Victor Reinz Air Cleaner Mounting Gasket, 71-13854-00 (Part No.71-13854-00)
from
$3.49
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
See More
Top Picks for 1979 GMC C3500 Carburetor Parts
Upgrade GMC C3500s with top-quality Carburetor Parts parts, including 88 OEM and aftermarket selections for your 1979 model.
Felpro – Felpro Carburetor Mounting Gasket, 60249 (Part No.60249)
from
$7.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More
Edelbrock – Edelbrock Carburetor Accelerator Pump Diaphragm 30cc Gasoline, 12400 (Part No.12400)
from
$13.99
The Edelbrock Accelerator Pump Diaphragm 30cc Gasoline No: 12400 for 4150 Carburetors Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage
See More
Holley – Holley Performance and Race Carburetor: 600 CFM, Manual Choke, 4 Barrel, Square Bore, Dual Inlet, 0-4776C (Part No.0-4776C)
from
$799.99
The Ultra Double Pumper Carburetors feature all aluminum construction and are equipped with metering blocks and a base plate made from 6061-T6 billet aluminum. Three different anodized color options (Red, Blue, or Black) allow for a personalized look while maintaining the ultra high strength and durability you get from billet. They weigh in at approximately 5 lbs less than a comparable zinc carburetor. The new Ultra Double Pumper Carburetors have an enhanced fuel curve for optimum performance, with many more features such as aluminum construction; anodized billet aluminum metering blocks and base plate; 4 corner idle for precise idle control; mechanical secondaries for great performance; clear fuel level sight plugs for easy, no mess fuel level adjustments; Ford automatic transmission kickdown for use on popular Ford transmissions; four vacuum ports for all necessary vacuum accessories; and for the first time on a Double Pumper, factory pre-set electric choke for easy, fast cold start-ups. The clean, polished look coupled with Red, Blue, or Black metering blocks and throttle body will certainly set your ride apart whether you are at the show or track. Dont trust your performance to just anyone, Holley is the only Modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60s.
See More
Edelbrock – Edelbrock Carburetor Vacuum Secondary Spring Kit, 12412 (Part No.12412)
from
$26.99
The Edelbrock No: 12412 Vacuum Secondary Spring Kit includes 7 springs that will fit on Holley 4150, 4150HP, 4160 series and various Demon Carburetors.
See More
Edelbrock – Edelbrock Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR) Remanufactured (Part No.9906)
from
$414.99
Burnished aluminum. GM/MAC- style throttle linkage. Electric choke installed from factory. Easy tuning with 2 piece design. Smooth secondary transition. Both timed for full vacuum ports. Includes PCV outlet.
See More
Holley – Holley Prem Street Carbs (Avengers), 0-81570 (Part No.0-81570)
from
$687.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
See More
United Carb – United Carb Carburetor-Remanufactured, 3-3256 (Part No.3-3256)
from
$331.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More
Edelbrock – Edelbrock Performer Series Carburetor Calibration Kit, Helps get the best performance, 1487 (Part No.1487)
Edelbrock – Edelbrock AVS2 1905 Carburetor: 650 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1905)
from
$428.99
“orange (5″” Hg) step-up spring. Use our Carburetor Stud Kits #8008 or #8024 if needed. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, RPM Air-Gap, Performer RPM, Torker II or other brands of similar design. For a black-finished AVS2, order part #19053.”
See More
Edelbrock – Edelbrock EGR Valve Adapter, 1476 (Part No.1476)
from
$88.99
Edelbrock EGR Adapter No: 1476 has made installing your new intake and carburetor easier when using part No: 3701 and No: 3706. When using Edelbrock EGR adapters, your existing EGR valve is repositioned to allow clearance for your carburetor. They’re made of cast aluminum and come complete with gaskets and bolts.
See More
Edelbrock – Edelbrock Fuel Bowl Inverted Flare Fuel Inlet Fitting #12415 (Part No.12415)
Edelbrock – Edelbrock Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip (Part No.12605)
from
$22.99
Edelbrock Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip.
See More
United Carb – United Carb Carburetor-Remanufactured, 3-3622 (Part No.3-3622)
from
$316.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More
Holley – Holley Street/Strip Carbs, 0-4779C (Part No.0-4779C)
from
$870.99
The Ultra Double Pumper Carburetors feature all aluminum construction and are equipped with metering blocks and a base plate made from 6061-T6 billet aluminum. Three different anodized color options (Red, Blue, or Black) allow for a personalized look while maintaining the ultra high strength and durability you get from billet. They weigh in at approximately 5 lbs less than a comparable zinc carburetor. The new Ultra Double Pumper Carburetors have an enhanced fuel curve for optimum performance, with many more features such as aluminum construction; anodized billet aluminum metering blocks and base plate; 4 corner idle for precise idle control; mechanical secondaries for great performance; clear fuel level sight plugs for easy, no mess fuel level adjustments; Ford automatic transmission kickdown for use on popular Ford transmissions; four vacuum ports for all necessary vacuum accessories; and for the first time on a Double Pumper, factory pre-set electric choke for easy, fast cold start-ups. The clean, polished look coupled with Red, Blue, or Black metering blocks and throttle body will certainly set your ride apart whether you are at the show or track. Dont trust your performance to just anyone, Holley is the only Modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60s.
See More
Holley – Holley Carburetor – 770 CFM Alum Street Avenger E/C, 0-83770 (Part No.0-83770)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
See More
Edelbrock – Edelbrock Performer 1400 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1400)
from
$523.99
“The Edelbrock 1400 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1400 Performer Series 600 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out. Secondly, the carburetor has the unique ability to “”hold a tune””, so the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent, and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with today€™s commercially available gasoline, gasohol, and blended fuels (E10, not E85). The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable and user-friendly for miles and miles of trouble-free operation. The #1400 is an emissions legal part when used with 1980 and older GM V8€™s (Chevrolet, Cadillac, Buick, GMC, Pontiac, and Oldsmobile) originally equipped with non-feedback carburetors. May require the use of adapter plate #2696.”
See More
Edelbrock – Edelbrock Carburetor Accelerator Pump, 12401 (Part No.12401)
from
$33.99
Edelbrock No: 12401 50cc Accelerator Pump Diaphragm for 4150 Carburetors. Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage
See More
Holley – Holley Street Carburetor: 750 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny, 0-80459SA (Part No.0-80459SA)
from
$549.99
The Street HP uses the best features from Holley’s race Bred 4150 HP carbs, but tamed for street and light competition use. The contoured main body from the 4150 HP has a tumble polished shiny finish. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street and strip engine setup for outstanding throttle response and drivability. A street HP base plate is used so there are plenty of vacuum ports for power brakes, PCV, etc.
See More
Holley – Holley Professional Race Carburetor: 1150 CFM, No Choke, 4 Barrel, 4500 Bore, Dual Inlet, Hard Core Gray, 0-80906HB (Part No.0-80906HB)
from
$1949.99
The Gen 3 utilizes high capacity fuel bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, 12 hole billet booster inserts, fully tunable billet metering blocks, adjustable external linkage, throttle position sensor mounting points and knurled (hand adjustable) curb idle screws Each calibration has been dyno and track tested to deliver proven performance!
See More
Holley – Holley Professional Race Carburetor: 1250 CFM, No Choke, 4 Barrel, 4500 Bore, Dual Inlet, Shiny, 0-80908BK (Part No.0-80908BK)
from
$1849.99
The Gen 3 utilizes high capacity fuel bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, 12 hole billet booster inserts, fully tunable billet metering blocks, adjustable external linkage, throttle position sensor mounting points and knurled (hand adjustable) curb idle screws Each calibration has been dyno and track tested to deliver proven performance!
See More
Holley – Holley Professional Race Carburetor: 1050 CFM, No Choke, 4 Barrel, 4500 Bore, Dual Inlet, Shiny, 0-80903BK (Part No.0-80903BK)
from
$1699.99
The Gen 3 utilizes high capacity fuel bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, 12 hole billet booster inserts, fully tunable billet metering blocks, adjustable external linkage, throttle position sensor mounting points and knurled (hand adjustable) curb idle screws Each calibration has been dyno and track tested to deliver proven performance!
See More
Holley – Holley Professional Race Carburetor: 950 CFM, No Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny, 0-80901RD (Part No.0-80901RD)
from
$1649.99
The Gen 3 utilizes high capacity fuel bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, 12 hole billet booster inserts, fully tunable billet metering blocks, adjustable external linkage, throttle position sensor mounting points and knurled (hand adjustable) curb idle screws Each calibration has been dyno and track tested to deliver proven performance!
See More
Holley – Holley Professional Race Carburetor: 1050 CFM, No Choke, 4 Barrel, 4500 Bore, Dual Inlet, Shiny, 0-80902BK (Part No.0-80902BK)
from
$1549.99
The Gen 3 utilizes high capacity fuel bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, 12 hole billet booster inserts, fully tunable billet metering blocks, adjustable external linkage, throttle position sensor mounting points and knurled (hand adjustable) curb idle screws Each calibration has been dyno and track tested to deliver proven performance!
See More
Holley – Holley Professional Race Carburetor: 950 CFM, No Choke, 4 Barrel, Square Bore, Dual Inlet, Hard Core Gray, 0-80805HBX (Part No.0-80805HBX)
from
$1449.99
Xtreme Performance – Holley Ultra XP(TM) Circle Track Carburetors! Ultra XP carbs are 38% lighter than our original HP, have fuel capacity that is 20% greater and 30 other new features! They’re available in our Hard Core Gray(TM) hard coat anodized finish with Black(TM) billet for improved corrosion protection & also available in natural tumble-polished aluminum with Black(TM) metering blocks and base plate. The Aluminum Ultra XP Cirlce Tracks are available in 650 & 750 CFM’s. Holley Ultra XP carburetors are Specifically Calibrated for Circle Track & offer new features such as anti-siphon valve in the main body; high capacity HP bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, fully tunable billet metering blocks, billet base plate, wedge floats, adjustable secondary linkage and knurled (hand adjustable) curb idle screws. Holley Ultra XP carburetors are the ultimate in square bore race carburetors!
See More
In-Demand Intake Manifold Parts for 1979 GMC C3500s
Select from 30 premium Intake Manifold Parts parts for your 1979 GMC C3500, with prices ranging from $5.99 to $971.99.
Edelbrock – Edelbrock Performer Intake Manifold for 1955-86 Small-Block Chevy, Satin Finish, 2101 (Part No.2101)
from
$279.99
Edelbrock Performer Intake Manifold for 1955-86 Small-Block Chevy, Satin Finish, 2101.
See More
Edelbrock – Edelbrock Performer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy, 2601 (Part No.2601)
from
$395.99
Edelbrock Performer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy, 2601.
See More
Felpro – Felpro Engine Intake Manifold Gasket Set, MS 90314-2 (Part No.MS 90314-2)
from
$34.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More
Felpro – Felpro Engine Intake Manifold Gasket Set, MS 90240-2 (Part No.MS 90240-2)
from
$22.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More
Dorman – Dorman Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In., 02604 (Part No.02604)
from
$9.49
This engine intake manifold expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
See More
Edelbrock – Edelbrock Intake Manifold Gasket for 1958-1986 Small-Block Chevy, 7201 (Part No.7201)
from
$28.99
Edelbrock part No: 7201 Intake Gaskets for 1958-1986 Small-Block Chevy allow for optimum flow and performance. Any gasket can create a seal, but a good gasket can do it with less clamping force, and for a longer period of time. The new MP-2N Micropore technology does not use solvents making our gaskets environmentally friendly. Impervious to most chemicals, this synthetic fiber composite provides a high recovery under load. This means that when compressed, the gasket will conform to any imperfections on the sealing surface even using lower flange pressures. A nitrile bead around each port opening makes the seal even better.
See More
Dorman – Help – Dorman – Help Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In., 10232 (Part No.10232)
from
$5.99
Our Engine Intake Manifold Expansion Plug is conveniently designed as a direct replacement for stripped plugs. A proper fit is ensured, every time.
See More
Mr. Gasket – Mr. Gasket Ultra Seal: Intake Gasket, 5819 (Part No.5819)
from
$60.49
Ultra-Seal intake manifold gaskets are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For OE replacement, high performance street, drag race and oval track use. Includes manifold end seals and distributor gasket.
See More
ARP Auto Racing – "ARP Auto Racing For Use With Chevy 396/ 454 Cubic"", 12 Point Head Type, Polished, With Washers, 435-2101" (Part No.435-2101)
from
$83.99
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.
See More
Edelbrock – Edelbrock Performer RPM Small Block Chevy Intake Manifold, 7101 (Part No.7101)
Mr. Gasket – Mr. Gasket Ultra Seal: Intake Gasket, 5827 (Part No.5827)
from
$46.09
Mr. Gasket Ultra-Seal Intake Manifold Gasketss are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For original equipment replacement, high performance street, drag race and oval track use. Includes manifold end seals and distributor gasket.
See More
Felpro – Felpro Engine Intake Manifold Gasket Set, MS 90323 (Part No.MS 90323)
from
$31.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
See More
Edelbrock – Edelbrock RPM Air-Gap Big Block Chevy 2-R Intake Manifold, 7562 (Part No.7562)
from
$492.99
Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM street-driven power. Dual-plane high-rise intake with 180 degree firing order. Produces incredible top-end horsepower. Retains good throttle response and acceleration. Larger plenum and runners maximize other upgrades. Edelbrock total power package maximizes gains. Available in cast, polished or endurashine finish.
See More
Edelbrock – Edelbrock Performer EPS Intake Manifold w/ Oil Fill Tube for 1955-86 Small-Block Chevy, 2703 (Part No.2703)
from
$339.99
Edelbrock Performer EPS Intake Manifold w/ Oil Fill Tube for 1955-86 Small-Block Chevy, 2703.
See More
ARP Auto Racing – "ARP Auto Racing For Use With Chevy 265/ 400 Cubic"", 12 Point Head Type, Polished, With Washers, 434-2101" (Part No.434-2101)
from
$60.99
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.
See More
Mr. Gasket – Mr. Gasket Ultra-Seal Intake Manifold Gaskets .125 Inch Thickness, 5812 (Part No.5812)
from
$63.29
Ultra-Seal intake manifold gaskets are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For OE replacement, high performance street, drag race and oval track use. Includes manifold end seals and distributor gasket.
See More
Holley – Holley Intake Manifolds, 825124 (Part No.825124)
from
$971.99
Holley Intake Manifolds, 825124. PERFORMANCE PARTS>PERFORMANCE DRESS UP>DRESS UP COMPONENTS>AIR CLEANER ASSEMBILIES from Holley
See More
Holley – Holley Intake Manifolds, 825131 (Part No.825131)
from
$797.99
Holley Intake Manifolds, 825131. PERFORMANCE PARTS>PERFORMANCE DRESS UP>DRESS UP COMPONENTS>AIR CLEANER ASSEMBILIES from Holley
See More
Holley – Holley Intake Manifolds, 825012 (Part No.825012)
from
$771.99
Holley Intake Manifolds, 825012. PERFORMANCE PARTS>PERFORMANCE DRESS UP>DRESS UP COMPONENTS>AIR CLEANER ASSEMBILIES from Holley
See More
Edelbrock – Edelbrock Performer RPM AIR-Gap Small Block Chevy Polished Intake Manifold, 75011 (Part No.75011)
from
$749.99
Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM. Dual-plane high-rise intake. For square bore carburetors only. For street and high performance use. Available in cast, polished or endurashine finish.
See More
Edelbrock – Edelbrock Performer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy, Polished Finish, 26011 (Part No.26011)
from
$708.99
Edelbrock Performer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy, Polished Finish, 26011.
See More
Edelbrock – Edelbrock Performer EPS Manifold with Oil Fill Tube for Small-Block Chevy, Polished Finish, 27031 (Part No.27031)
from
$645.99
“Edelbrock part No. 27031 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response. This Performer EPS intake manifold combines a modern runner design with a front mounted oil fill tube for those who want the vintage look of our Classic valve covers with no breathers. Includes Oil Fill Tube (not installed) and matching push-in breather cap. The Oil Fill Tube and Breather are also available separately as No. 4803. This intake manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. This small-block Chevy manifold has a runner design that’s “”tuned”” for peak torque at 3500 rpm on a 350-inch engine and it’s ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft.-lbs. of torque over the Edelbrock Performer intake manifold No. 21011 on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft.-lbs. of torque for more performance where you need it most. This manifold offers a polished finish for a brilliant shine and classic look.”
See More
Top Street Performance – Top Street Performance Chevy Big Block Carbureted Dual Plane Aluminum Intake Manifold , Polished, 83000 (Part No.83000)
from
$477.99
TSP’s dual,plane high,performance intake manifold for the big block Chevy is ideal for street performance applications, with a design that improves throttle response, as well as power and torque over a wide rpm range , idle to 6,000. It is cast from lightweight aluminum and features a low profile for ideal hood clearance. Additional provisions include dual distributor hold,downs, 4 corner water ports, and a choke block,off kit. Set up for spread bore carbs, this manifold comes with an adapter plate and gasket for use with square bore types.
See More
Weiand – Weiand Action +Plus Intake Manifold, 8120P (Part No.8120P)
from
$419.99
New Everbright(TM) Manifold coating now available on the most popular Weiand and Holley intakes uses proprietary vacuum metalizing technology combined with a protective clear powdercoat to provide long lasting, virtually maintenance free polished looks.
See More
Most Sold 1979 GMC C3500 Air Intake Hoses
Explore our best-selling GMC parts for the 1979 C3500 among 1 OEM and aftermarket options starting from $17.49.
Gates – Gates Defroster/Air Intake Hose (Sold by foot), 23848 (Part No.23848)
from
$17.49
For defrosters, air ducts, air intakes, under-hood applications and other low pressure, low suction applications. Approved for marine applications.
See More
Top-Rated Air Intakes Brands For Your 1979 GMC C3500
Shop for the best-rated brands offering Air Intakes and other products for your 1979 GMC C3500s. Below you’ll find some of our best rated Air Intakes from Felpro, Edelbrock, and Holley, and more. Air Intakes from these brands that fit a 1979 C3500 start at just $4.49 and are rated as high as 4.6 stars. OEM and aftermarket Air Intakes don’t get more top quality, durable, and affordable than from the brands below.
Popular Felpro 1979 GMC C3500 Air Intakes
When it comes to maintaining or upgrading your 1979 GMC C3500, using quality Air Intakes is essential to ensure durability and a perfect fit. Felpro ticks all of those boxes. We offer a wide selection of Felpro Air Intakes, specifically designed for the 1979 GMC C3500. With over 3 Felpro brand Air Intakes in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $4.49, with an average price of just $15.82. Plus, with over 88 customer reviews and an average rating of 4.6 stars, you can trust that our Felpro Air Intakes will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$34.99
(46)
Felpro Engine Intake Manifold Gasket Set, MS 90314-2
“New intake gasket for my 25th Anniversary Corvette”
Popular Edelbrock 1979 GMC C3500 Air Intakes
Edelbrock auto parts is one of the highest quality Air Intake brands in the market. Any 1979 GMC C3500 owner should feel confident when installing genuine Edelbrock parts in their vehicle. To ensure the best fit and performance for your 1979 C3500, Advance Auto Parts carries a full inventory of 3 Edelbrock Air Intakes. Plus you will be keeping your GMC in peak condition while saving money because prices on these Edelbrock Air Intakes range from $13.99 to $279.99, plus, with more than 13 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Air Intakes below will deliver on both quality and value.
from
$13.99
(1)
Edelbrock Carburetor Accelerator Pump Diaphragm 30cc Gasoline, 12400
“exatly what I needed”
from
$279.99
(3)
Edelbrock Performer Intake Manifold for 1955-86 Small-Block Chevy, Satin Finish, 2101
“Get the matching carb, increased HP by 50 points”
from
$50.99
(9)
"Edelbrock Pro-Flo Black 14"" Round Air Cleaner with 3"" Paper Element (Deep Flange), 1223"
“I like the look of the matte black air cleaner cover. Now just need to dress up the rest of the engine to match”
FAQs for 1979 GMC C3500 Air Intakes
Which Air Intakes are best-sellers for 1979 GMC C3500s?
Out of 131 Air Intakes that fit 1979 GMC C3500s, the following parts are the top sellers:
- Dorman Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In., 02604 (5701295) – $9.49
- "Edelbrock Pro-Flo Chrome 14"" Round Air Cleaner with 3"" Paper Element (Deep Flange), 1221" (17140002) – $46.99
- Edelbrock Intake Manifold Gasket for 1958-1986 Small-Block Chevy, 7201 (17140110) – $28.99
What’s the price range for 1979 GMC C3500 Air Intakes?
Air Intake prices for the 1979 GMC C3500 start at $3.49 and go up to $1,949.99 for the most premium parts.
What’s the average price of a Air Intake for a 1979 GMC C3500?
The average price for Air Intakes for the 1979 GMC C3500 is $527.38. Keep in mind the variety of part types within our Air Intake category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Air Intakes for other GMC C3500 model years?
What are the cheapest Air Intakes for my 1979 GMC C3500?
The cheapest 1979 GMC C3500 Air Intakes we carry in stock are:
- Victor Reinz Air Cleaner Mounting Gasket, 71-13854-00 (50311994) – $3.49
- Felpro Air Cleaner Mounting Gasket, 60038 (5785448) – $4.49
- Felpro Carburetor Choke Tube Gasket, 72591 (19780183) – $4.49
- Dorman – Help Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In., 10232 (22140133) – $5.99
- Felpro Carburetor Mounting Gasket, 60249 (5182131) – $7.99
What are the top-rated Air Intakes that fit the 1979 GMC C3500?
Out of 534 reviews by customers, our 1979 GMC C3500 Air Intakes have an average customer rating of . These are some of the highest-rated Air Intake types for the 1979 GMC C3500 and their top-rated products:
- Carburetor Kits
- Air Cleaner Parts
- Intake Manifold Parts
What types of Air Intakes do you sell for my 1979 GMC C3500?
As of 8/2/26, these are some of the most in-demand types of Air Intakes for a 1979 GMC C3500:
Can I get help with 1979 GMC C3500 Air Intake orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Air Intakes and more.
What is your return policy for GMC C3500 Air Intakes?
Advance Auto Parts keeps returns simple. For new GMC C3500 Air Intakes and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
