1979 Dodge W150 Drivetrains

Essential 1979 Dodge W150 Drivetrains

Yukon Gear – Drive Flange Cap For Dana 44 (Part No.32134)

Drive Flange Cap For Dana 44

from

$109.99
Product Features:
  • Drive flange cap
  • Fits Dana 44
See More

USA Standard Gear – Open Spider Gear Set For Dana Spicer 44, 30 Spline (Part No.39006)

Open Spider Gear Set For Dana Spicer 44, 30 Spline

from

$203.99
Product Features:
  • Spider gear kit
  • Fit Dana Spicer 44 open differential with 30 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Felpro – Differential Cover Gasket (Part No.RDS 55073)

Differential Cover Gasket

from

$9.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

National – Multi Purpose Seal (Part No.710928)

Multi Purpose Seal

from

$15.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Dorman – Oil Drain Plug Differential Plug Chrysler 2008-2000, Head Size (Part No.090-062CD)

Oil Drain Plug Differential Plug Chrysler 2008-2000, Head Size

from

$8.99
This differential cover plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this differential cover plug matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Felpro – Axle Housing Cover Gasket (Part No.RDS 6629)

Axle Housing Cover Gasket

from

$6.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

National – Wheel Bearing and Seal Kit (Part No.SBK-1)

Wheel Bearing and Seal Kit

from

$19.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Spindle bearing and seal kit
  • Includes all components required to complete the repair
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

USA Standard Gear – TCaseShiftForkInsert (Part No.70666)

TCaseShiftForkInsert

from

$11.99
TCaseShiftForkInsert

Pro-King – Differential Ring Gear Bolt (Part No.742G935)

Differential Ring Gear Bolt

from

$1.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

Redline Synthetic "Shock Proof" Oil - 4 Quarts

from

$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil
See More

Yukon Gear – Standard Open Carrier Case For ’09 & Down Chrysler 9.25" Rear (Part No.20008)

Standard Open Carrier Case For '09 & Down Chrysler 9.25" Rear

from

$261.99
Product Features:
  • Standard open carrier case
  • Fits 2009 and down Chrysler 9.25″ rear
  • Does not include spider gears
See More

Motive Gear – Differential Carrier (Part No.C9.25E)

Differential Carrier

from

$165.99


Product Features:
  • CHRYS 9 1/4″ OPEN EMPTY CASE CAN USE ABS RING.
See More

Yukon Gear – 9.25" Chrysler, Dana 60 Semi-Float X/P Bolt, 80 & Up, 5/16" Head, Tapered Shoulder (Part No.33238)

9.25" Chrysler, Dana 60 Semi-Float X/P Bolt, 80 & Up, 5/16" Head, Tapered Shoulder

from

$9.99
Product Features:
  • Cross pin bolt for Dana Spicer 60 with c-clip axles
See More

Yukon Gear – Replacement Yoke For Dana 30, 44, And 50 With Fine Spline And A 1310 U/Joint Size (Part No.41017)

Replacement Yoke For Dana 30, 44, And 50 With Fine Spline And A 1310 U/Joint Size

from

$121.99
Yukon replacement yoke for Dana 30, 44, and 50 with fine spline and a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 44
  • 26 spline
  • 1310 u-joint size
  • 3.219″ snap ring span
  • 1.062″ cap diameter
  • Outside snap ring design
  • Strap style
See More

Yukon Gear – Differential Side Bearing Screw Adjuster For 9.25" Chrysler (Part No.33256)

Differential Side Bearing Screw Adjuster For 9.25" Chrysler

from

$64.99
Differential side bearing screw adjuster for 9.25″ Chrysler.

Product Features:
  • Side adjuster for Chrysler 9.25″ rear
See More

Yukon Gear – Powr Lok Belleville Clutch Plate, Splined (Part No.16174)

Powr Lok Belleville Clutch Plate, Splined

from

$36.99
Product Features:
  • Belleville plate, splined
  • Fits Dana Spicer 44 Powr Lok
See More

Driveworks – CENTER SUPPORT (Part No.S-HB-88108-D)

CENTER SUPPORT

from

$36.49
CENTER SUPPORT

National – Multi Purpose Seal (Part No.482163N)

Multi Purpose Seal

from

$5.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

USA Standard Gear – Pinion Installation Kit For Chrysler 9.25" Rear (Part No.60004)

Pinion Installation Kit For Chrysler 9.25" Rear

from

$135.99
9.25″ Chrysler REAR PINION KIT .

Product Features:
  • Fits 2000 and down Chrysler 9.25″ rear
  • Uses Koyo bearings and races
  • Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
See More

Yukon Gear – Outer Stub Thrust Washer For Dana 30 & 44 (Part No.33534)

Outer Stub Thrust Washer For Dana 30 & 44

from

$7.99
Product Features:
  • Outer stub thrust washer
  • Fits Dana Spicer 30 and 44
See More

Yukon Gear – Steel Spool For Dana 44 With 30 Spline Axles, 3.92 & Up (Part No.32041)

Steel Spool For Dana 44 With 30 Spline Axles, 3.92 & Up

from

$338.99
Yukon Performance steel spool for Dana 44 with 30 spline axles. fits 3.92 and up. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Chrysler Dana Spicer 44 with 30 spline axles
  • 3.92 and up ratio only
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

Yukon Gear – 9.25" Pinion Gear Thrust Washer (Part No.33274)

9.25" Pinion Gear Thrust Washer

from

$12.99
9.25″ pinion gear thrust washer.

Product Features:
  • Pinion gear thrust washer for Chrysler 9.25″ rear
See More

Yukon Gear – C/Clip (Part No.33083)

C/Clip

from

$8.99
C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.

Product Features:
  • c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
  • .150″ thick
See More

National – Bearings (Part No.31520)

Bearings

from

$12.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Zip Locker Install Kit (Part No.34026)

Zip Locker Install Kit

from

$249.99
Product Features:
  • Installation kit
  • Includes o-ring for bulkhead fitting, bulkhead fitting, outer fitting, switch, front and rear switch cover, solenoid, zip ties and 20′ air line
See More

Driveworks – Tapered Roller Bearing (Part No.S-M-804010)

Tapered Roller Bearing

from

$15.29
Product Features:
  • Brand may vary by location
See More

Yukon Gear – 7290 U-Joint Strap Bolt (One Bolt Only) For Chrysler 7.25", 8.25", 8.75", 9.25" (Part No.33246)

7290 U-Joint Strap Bolt (One Bolt Only) For Chrysler 7.25", 8.25", 8.75", 9.25"

from

$10.99
7290 U-joint strap bolt (one bolt only) for Chrysler 7.25″, 8.25″, 8.75″, 9.25″.

Product Features:
  • U-Joint strap bolt
  • Fits Chrysler 7.25″, 8.25″, 8.75″ and 9.25″
  • 7290 u-joint size
See More

Popular 1979 Dodge W150 Drivetrains Categories

1979 Dodge W150 Drivetrains

You count on your 1979 Dodge W150 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 457 Drivetrains ranging in price from $1.99 to $1,302.99, you’re sure to find everything you need for your 1979 Dodge W150.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 17 different brands like Moog, National, and Driveworks. 1979 Dodge W150 Drivetrains start as low as $1.99!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 4,904 extensive product reviews on 1979 Dodge W150 Drivetrains. Some of the top-rated Drivetrains products we carry are Differential Cover Gasket with 4.7 stars and Multi Purpose Bearing with 3.4 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1979 Dodge W150 below to get started!

Top-Rated Drivetrains Brands For Your 1979 Dodge W150

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1979 Dodge W150 running right for years to come. In our inventory you’ll find brands like Moog, National, Driveworks, and even more.

Popular Needa Parts Drivetrains

You’ll find popular Needa Parts brand products across Differentials. All are waiting to get your 1979 Dodge W150 back on the road. Some of the top-rated Needa Parts products in these categories are:
Differential Plug, Rubber, Chrysler 2008-2000
from $5.99
(11)
Differential Plug, Rubber, Chrysler 2008-2000
Differential Drain Plugs

FAQs for 1979 Dodge W150 Drivetrains

What are the most purchased Drivetrains for the 1979 Dodge W150?

Out of 457 Drivetrains for the 1979 Dodge W150, the most popular in our inventory are:
Universal Joint
from $15.99
(52)
Universal Joint
U-Joints

What are the top-rated 1979 Dodge W150 Drivetrains?

Top-rated Drivetrains for your 1979 Dodge W150 based on customer reviews/ratings are:
Differential Cover Gasket
from $9.49
(34)
Differential Cover Gasket
“Perfect size”
Multi Purpose Bearing
from $44.99
(25)
Multi Purpose Bearing
“Fit just like the old one.”
DIFFERENTIAL GASKET
from $6.79
(21)
DIFFERENTIAL GASKET
“I always use Fel-Pro gaskets they’re the best, but this gasket to replace the differential gasket on my son’s Jeep when I did a fluid change work and ”