1979 Dodge Omni Alternators and Starters

Essential Alternators and Starters for 1979 Dodge Omnis

Carquest Premium – Starter Solenoid (Part No.SBC2518)

Starter Solenoid

from

$243.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest Premium – Starter Solenoid (Part No.SBC2464)

Starter Solenoid

from

$87.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest Premium – Ignition Lock Cylinder (Part No.CSA3348)

Ignition Lock Cylinder

from

$22.99
The Ignition switch is the main power switched distribution point in every vehicle. The ignition switch in some manner will be connected directly to the vehicle battery and then supply power out to every operating system in the vehicle that is required to be connected and disconnected from the vehicle’s battery or power source.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Dorman – Ignition Lock Cylinder: Two Keys Included (Part No.989-007)

Ignition Lock Cylinder: Two Keys Included

from

$38.99
This ignition lock cylinder is designed to match the fit, function and performance of the original equipment part on specified vehicles. It is engineered to help restore ignition lock function when an original cylinder is broken or worn out.

Product Features:
  • Direct replacement – this ignition lock cylinder matches the fit and function of the original equipment assembly on certain vehicle years, makes and models
  • Ideal solution – engineered to help restore and ensure the functionality of the lock cylinder
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – New Voltage Regulator (Part No.RAA1049)

New Voltage Regulator

from

$38.99
CARQUEST Voltage Regulators are engineered and created by an automotive charging system manufacturer designed to meet or exceed OEM specifications.

Product Features:
  • CARQUEST Voltage Regulators are designed to match OE fit, form and function. Fitted with critical OEM electronic components results in longer life expectancy.
  • CARQUEST Voltage Regulators are mechanically designed with utilization of surface mount technology, robust mechanical housing, and consistent encapsulation to protect against moistures & vibration.
  • CARQUEST Voltage Regulators uses surface mount technology and uniform encapsulation to protect against moistures & vibration.
  • CARQUEST Voltage Regulators are 100% individually tested for all product functionalities that includes the proper voltage set-point, power capabilities, and other product specifications.
See More

ACDelco – Voltage Regulator (Part No.C603Z)

Voltage Regulator

from

$71.99
ACDelco Professional Voltage Regulator is a high quality aftermarket replacement component for one or more of the following vehicle systems: starting and charging. This premium aftermarket motor is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1661)

Multi-Use Connector

from

$2.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Multi-Purpose Relay (Part No.SBA2128)

Multi-Purpose Relay

from

$41.99
Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

Carquest Premium – Multi-Purpose Relay (Part No.SBC3228)

Multi-Purpose Relay

from

$38.99
Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

Carquest Premium – Multi-Purpose Relay (Part No.SBA3464)

Multi-Purpose Relay

from

$23.99
Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

Carquest Premium – Alternator Brush Set (Part No.XAA1073)

Alternator Brush Set

from

$3.99
The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.

Product Features:
  • Application matched components ensure the charging system can be returned to like new condition.
See More

Carquest Premium – Alternator Brush Set (Part No.XAA1126)

Alternator Brush Set

from

$4.99
The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.

Product Features:
  • Application matched components ensure the charging system can be returned to like new condition.
See More

Carquest Premium – Alternator Brush Set (Part No.XAA1047)

Alternator Brush Set

from

$3.49
The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.

Product Features:
  • Application matched components ensure the charging system can be returned to like new condition.
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1062)

Multi-Use Connector

from

$14.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Starter Bushing (Part No.SBA5153)

Starter Bushing

from

$1.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest Premium – Starter Bushing (Part No.SBA5169)

Starter Bushing

from

$1.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest Premium – Alternator Diode (Part No.SCA1024)

Alternator Diode

from

$11.49
The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.

Product Features:
  • Application matched components ensure the charging system can be returned to like new condition.
See More

Carquest Premium – Alternator: Remanufactured, 78 Amps, Limited Lifetime Warranty (Part No.7546A)

Alternator: Remanufactured, 78 Amps, Limited Lifetime Warranty

from

$103.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading limited warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading limited warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:


    Product Features:
    • Designed to meet or exceed OE specifications for fit, form and function
    • Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
    • Regulators and rectifiers are 100% electronically load tested for reliable charging performance
    • 100% new OE-quality brushes and bearings are used to ensure long service life
    • Rotors and stators are load tested and double insulated for maximum charging performance
    • Slip rings are precision polished for maximum brush contact and service life
    • Application-specific technical bulletins included where applicable
    • All units are 100% triple tested to ensure quality and performance
    • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

Carquest Professional – Alternator: New, 120 Amps (Part No.13309AN)

Alternator: New, 120 Amps

from

$191.99
Carquest Professional alternators are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new alternators are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional alternators are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new alternators are built with all new components and are 100% triple tested to ensure high quality that is backed by an industry-leading limited warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:


    Product Features:
    • Designed to meet or exceed OE specifications for fit, form and function
    • Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
    • All new components are utilized to ensure long service life
    • Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
    • Internal electronics are upgraded for heavy duty reliability (where applicable)
    • Regulators and rectifiers are 100% electronically load tested for reliable charging performance
    • Application-specific technical bulletins included where applicable
    • All units are 100% triple tested to ensure quality and performance
    • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
    • Rotors and stators are load tested and double insulated for maximum charging performance
See More

Carquest Premium – Alternator: Remanufactured, 90 Amps (Part No.13307A)

Alternator: Remanufactured, 90 Amps

from

$145.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • Regulators and rectifiers are 100% electronically load tested for reliable charging performance
  • 100% new OE-quality brushes and bearings are used to ensure long service life
  • Rotors and stators are load tested and double insulated for maximum charging performance
  • Slip rings are precision polished for maximum brush contact and service life
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

Carquest Premium – Alternator: Remanufactured, 78 Amps, Limited Lifetime Warranty (Part No.7549A)

Alternator: Remanufactured, 78 Amps, Limited Lifetime Warranty

from

$88.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading limited warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading limited warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:


    Product Features:
    • Designed to meet or exceed OE specifications for fit, form and function
    • Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
    • Regulators and rectifiers are 100% electronically load tested for reliable charging performance
    • 100% new OE-quality brushes and bearings are used to ensure long service life
    • Rotors and stators are load tested and double insulated for maximum charging performance
    • Slip rings are precision polished for maximum brush contact and service life
    • Application-specific technical bulletins included where applicable
    • All units are 100% triple tested to ensure quality and performance
    • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

Carquest Premium – Alternator: Remanufactured, 120 Amps, Limited Lifetime Warranty (Part No.13309A)

Alternator: Remanufactured, 120 Amps, Limited Lifetime Warranty

from

$144.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • Regulators and rectifiers are 100% electronically load tested for reliable charging performance
  • 100% new OE-quality brushes and bearings are used to ensure long service life
  • Rotors and stators are load tested and double insulated for maximum charging performance
  • Slip rings are precision polished for maximum brush contact and service life
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

National – Multi-Purpose Bearing (Part No.201-S)

Multi-Purpose Bearing

from

$21.79
Product Features:
  • BUILT TO LAST: Advanced heat treatment process for strength
  • PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
  • RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
  • COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
  • RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
See More

FAG US – Radial Insert Ball Bearing (Part No.6203-RSR)

Radial Insert Ball Bearing

from

$36.49
We develop and produce high-quality roller bearings, spherical bearings, and plain bearings worldwide for a wide range of applications.

Product Features:
  • Radial Ball Bearing, Both Sides Shield.
  • Coverage of classic and new high-tech solutions for the best system coverage
See More

National – Multi-Purpose Bearing (Part No.MNJ-471-S)

Multi-Purpose Bearing

from

$14.49
Product Features:
  • RIGHT TYPE: Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
  • PREMIUM MATERIALS: Precision manufactured using high-quality materials for outstanding durability and performance
  • OE-STYLE DESIGN: Engineered to meet OE specifications
  • COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
  • RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
See More

Driveworks – Ball Bearing (Part No.SL-203-FF)

Ball Bearing

from

$13.49
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Upgrade your 1979 Dodge Omni with Top-Quality Alternators and Starters

When it comes to maintaining or upgrading your 1979 Dodge Omni, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Alternators and Starters are key to keeping your Omni functioning at its best. At Advance Auto Parts, we offer a wide selection of 16 Alternators and Starters for the 1979 Dodge Omni, designed to meet your needs without breaking the bank. From Voltage Regulator Part replacements to Ignition Lock Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Alternators and Starters for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Alternators and Starters for your 1979 Dodge Omni at great prices. Our Alternators and Starters inventory for this model ranges from just $1.99 to $243.99, with an average price of $44.27. Our 16 Alternators and Starters in stock come from 5 trusted brands, so you’re sure to find the right part for your 1979 Dodge Omni without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1979 Dodge Omni, we stock popular OEM and aftermarket Alternators and Starters from top names like Carquest Premium DriveWorks, and more. Carquest Premium Alternators and Starters start at just $93.99 and boast an impressive 4.4 stars average rating from customers. With 24 customer reviews and counting, our 1979 Dodge Omni Alternators and Starters have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Alternators and Starter upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 1979 Dodge Omni is always ready to roll. We’re committed to providing you with everything you need to keep your Omni in top shape, all in one place. Start shopping confidently below for your 1979 Dodge Omni!

Best-Selling Voltage Regulator Parts for 1979 Dodge Omnis

Enhance the driving experience in your Dodge with 3 quality Voltage Regulator Part components, starting at $14.99.

Carquest Premium – New Voltage Regulator (Part No.RAA1049)

New Voltage Regulator

from

$38.99
CARQUEST Voltage Regulators are engineered and created by an automotive charging system manufacturer designed to meet or exceed OEM specifications.

Product Features:
  • CARQUEST Voltage Regulators are designed to match OE fit, form and function. Fitted with critical OEM electronic components results in longer life expectancy.
  • CARQUEST Voltage Regulators are mechanically designed with utilization of surface mount technology, robust mechanical housing, and consistent encapsulation to protect against moistures & vibration.
  • CARQUEST Voltage Regulators uses surface mount technology and uniform encapsulation to protect against moistures & vibration.
  • CARQUEST Voltage Regulators are 100% individually tested for all product functionalities that includes the proper voltage set-point, power capabilities, and other product specifications.
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1062)

Multi-Use Connector

from

$14.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

ACDelco – Voltage Regulator (Part No.C603Z)

Voltage Regulator

from

$71.99
ACDelco Professional Voltage Regulator is a high quality aftermarket replacement component for one or more of the following vehicle systems: starting and charging. This premium aftermarket motor is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Most Popular 1979 Dodge Omni Ignition Lock Parts

Customize your Dodge with 3 Ignition Lock Parts products like Ignition Lock Cylinders, all priced under $31.99.

Dorman – Ignition Lock Cylinder: Two Keys Included (Part No.989-003)

Ignition Lock Cylinder: Two Keys Included

from

$31.99
This ignition lock cylinder is designed to match the fit, function and performance of the original equipment part on specified vehicles. It is engineered to help restore ignition lock function when an original cylinder is broken or worn out.

Product Features:
  • Direct replacement – this ignition lock cylinder matches the fit and function of the original equipment assembly on certain vehicle years, makes and models
  • Ideal solution – engineered to help restore and ensure the functionality of the lock cylinder
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Ignition Lock Cylinder (Part No.CSC2306)

Ignition Lock Cylinder

from

$18.99
The Ignition switch is the main power switched distribution point in every vehicle. The ignition switch in some manner will be connected directly to the vehicle battery and then supply power out to every operating system in the vehicle that is required to be connected and disconnected from the vehicle’s battery or power source.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Carquest Premium – Ignition Lock Cylinder (Part No.CSC2095)

Ignition Lock Cylinder

from

$17.99
The Ignition switch is the main power switched distribution point in every vehicle. The ignition switch in some manner will be connected directly to the vehicle battery and then supply power out to every operating system in the vehicle that is required to be connected and disconnected from the vehicle’s battery or power source.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Top Picks for 1979 Dodge Omni Alternator Parts

Upgrade Dodge Omnis with top-quality Alternator Parts parts, including 6 OEM and aftermarket selections for your 1979 model.

Carquest Premium – Alternator: Remanufactured, 60 Amps, Limited Lifetime Warranty (Part No.7024A)

Alternator: Remanufactured, 60 Amps, Limited Lifetime Warranty

from

$93.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading limited warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading limited warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:


Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • Regulators and rectifiers are 100% electronically load tested for reliable charging performance
  • 100% new OE-quality brushes and bearings are used to ensure long service life
  • Rotors and stators are load tested and double insulated for maximum charging performance
  • Slip rings are precision polished for maximum brush contact and service life
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

Driveworks – Ball Bearing (Part No.SL-203-FF)

Ball Bearing

from

$13.49
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

National – Multi-Purpose Bearing (Part No.MNJ-471-S)

Multi-Purpose Bearing

from

$14.49
Product Features:
  • RIGHT TYPE: Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
  • PREMIUM MATERIALS: Precision manufactured using high-quality materials for outstanding durability and performance
  • OE-STYLE DESIGN: Engineered to meet OE specifications
  • COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
  • RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
See More

Carquest Premium – Alternator Diode (Part No.SCA1024)

Alternator Diode

from

$11.49
The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.

Product Features:
  • Application matched components ensure the charging system can be returned to like new condition.
See More

Carquest Premium – Alternator Brush Set (Part No.XAA1073)

Alternator Brush Set

from

$3.99
The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.

Product Features:
  • Application matched components ensure the charging system can be returned to like new condition.
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1661)

Multi-Use Connector

from

$2.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

In-Demand Starter Parts for 1979 Dodge Omnis

Select from 4 premium Starter Parts parts for your 1979 Dodge Omni, with prices ranging from $1.99 to $243.99.

Carquest Premium – Multi-Purpose Relay (Part No.SAC1245)

Multi-Purpose Relay

from

$37.99
Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

Carquest Premium – Starter Solenoid (Part No.SBC2518)

Starter Solenoid

from

$243.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest Premium – Starter Solenoid (Part No.SBC3376)

Starter Solenoid

from

$88.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest Premium – Starter Bushing (Part No.SBA5153)

Starter Bushing

from

$1.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Top-Rated Alternators and Starters Brands For Your 1979 Dodge Omni

Shop for the best-rated brands offering Alternators and Starters and other products for your 1979 Dodge Omnis. Below you’ll find some of our best rated Alternators and Starters from Carquest Premium and DriveWorks, and more. Alternators and Starters from these brands that fit a 1979 Omni start at just $13.49 and are rated as high as 4.4 stars. OEM and aftermarket Alternators and Starters don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest Premium 1979 Dodge Omni Alternators and Starters

When it comes to maintaining or upgrading your 1979 Dodge Omni, using quality Alternators and Starters is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Alternators and Starters, specifically designed for the 1979 Dodge Omni. With over 1 Carquest Premium brand Alternators and Starters in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $93.99. Plus, with over 4 customer reviews and an average rating of 4.4 stars, you can trust that our Carquest Premium Alternators and Starters will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Alternator: Remanufactured, 60 Amps, Limited Lifetime Warranty
from $93.99
(4)
Alternator: Remanufactured, 60 Amps, Limited Lifetime Warranty
“Working like it should”

Popular DriveWorks 1979 Dodge Omni Alternators and Starters

DriveWorks auto parts is one of the highest quality Alternators and Starter brands in the market. Any 1979 Dodge Omni owner should feel confident when installing genuine DriveWorks parts in their vehicle. To ensure the best fit and performance for your 1979 Omni, Advance Auto Parts carries a full inventory of 1 DriveWorks Alternators and Starters. Plus you will be keeping your Dodge in peak condition while saving money because prices on these DriveWorks Alternators and Starters range up to $13.49, plus, with more than 7 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Alternators and Starters below will deliver on both quality and value.
Ball Bearing
from $13.49
(7)
Ball Bearing
“fit great”

FAQs for 1979 Dodge Omni Alternators and Starters

Which Alternators and Starters are best-sellers for 1979 Dodge Omnis?

Out of 16 Alternators and Starters that fit 1979 Dodge Omnis, the following parts are the top sellers:

What’s the price range for 1979 Dodge Omni Alternators and Starters?

Alternators and Starter prices for the 1979 Dodge Omni start at $1.99 and go up to $243.99 for the most premium parts.

What’s the average price of a Alternators and Starter for a 1979 Dodge Omni?

The average price for Alternators and Starters for the 1979 Dodge Omni is $44.27. Keep in mind the variety of part types within our Alternators and Starter category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Alternators and Starters for other Dodge Omni model years?

Yes, we currently carry Alternators and Starters for 11 model years of Dodge Omnis between 1978 and 1990. Alternators and Starters are bought most frequently for the following model years: 1990, 1989, 1988, 1987, 1986, 1985, 1984, 1983, and 1982.

What are the cheapest Alternators and Starters for my 1979 Dodge Omni?

The cheapest 1979 Dodge Omni Alternators and Starters we carry in stock are:

What are the top-rated Alternators and Starters that fit the 1979 Dodge Omni?

Out of 24 reviews by customers, our 1979 Dodge Omni Alternators and Starters have an average customer rating of . These are some of the highest-rated Alternators and Starter types for the 1979 Dodge Omni and their top-rated products:

What types of Alternators and Starters do you sell for my 1979 Dodge Omni?

Can I get help with 1979 Dodge Omni Alternators and Starter orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Alternators and Starters and more.

What is your return policy for Dodge Omni Alternators and Starters?

Advance Auto Parts keeps returns simple. For new Dodge Omni Alternators and Starters and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.