1979 Buick Regal Suspension Parts

Below you will find various in-demand Buick Suspension Parts, components and accessories for your 1979 Regal. Advance Auto Parts has popular Regal parts like Air Suspension and Kits, Shocks and Struts, Control Arms and more. You’ll also find aftermarket and OEM Suspension Parts for other Regal model years including 2003, 2004, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and more. Select a category of 1979 Buick Regal Suspension Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1979 Buick Regal Suspension Parts Categories

Air Shock Installation Kits

Shock Absorber and Coil Spring Assemblies

Air Suspension Shocks

Rear Shock and Struts

Front Shock and Struts

Coil Spring Sets

Front Coil Springs

Lower Control Arm Bumpers

Shock Boots, Levelers, and Accessories

Air Suspensions

Suspension Complete Bushing Kits

Lower Control Arm Bushings

Strut Bellows

Control Arm Shaft Kits

Coil Spring Insulators

Jounce Bumpers

Essential Suspension Parts for 1979 Buick Regals

from

$69.99

Complete Strut Assem

from

$421.99

Product Features:

Incredible Improvement in Control
Maintains Proper Caster and Camber Alignment
Increase in Handling and Control
Greatly Reduce Wheel Hop on Quick Acceleration
Even Braking Control is Improved
Better Suspension Stability

from

$144.99

Ideal for hauling, Monroe Max-Air shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)

Product Features:

MAINTAIN RIDE HEIGHT UNDER LOAD – Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission; see owner’s manual)
EASY TO ADJUST – Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor; pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
EXCEPTIONAL HANDLING – Full-displaced valving on compression and extension cycles for a smooth ride
BUILT TO LAST – Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
Special Air Fitting: Resists air leakage.

from

$231.99

Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.

Product Features:

REDUCES SAG UNDER LOAD – Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
EXCEPTIONAL HANDLING – Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
LONGER SERVICE LIFE – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
5/8 nitrocarburized rod for long service life.
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Lower Mount Type: Loop Bushing and Cantilever Pin Mount – 1/2″ Stud Diameter X 1 5/16″ Stud Length (Center of Loop to Frame)
Upper Mount Type: Cross Pin Mount – Closed Ended, 5/16″ Hole ID (Both Ends) X 2.7/8″ Pin Length (Hole Center to Center)

from

$36.99

Designed to protect the strut, the Monroe Strut-Mate Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:

REPLACES DAMAGED JOUNCE BUMPER OR BOOT – Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD – Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT – Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE – Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING – Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL – Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST – Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

from

$35.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Engineered to meet or exceed OE requirements
Incorporates proven design and engineering features

from

$107.99

Drag Shock-90/10:GM

from

$194.99

Quick Strut Kit

from

$138.99

Coil Springs

from

$166.99

Coil Springs

from

$46.99

Monroe is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.

from

$25.99

from

$135.99

100% Load tested
Easy to install
Provides like-new steering
Designed to lower stresses for longer service life
Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

from

$169.99

100% Load tested
Easy to install
Provides like-new steering
Designed to lower stresses for longer service life
Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

from

$30.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Reduces vibration
Reduces road noise
UV resistant
No Squeak

from

$5.29

Protects spring and spring seat from damage
Replacement helps to reduce noise
Includes insulator and bearing

from

$16.29

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Loose or worn chassis parts can lead to premature tire wear
Incorporates proven design and engineering features

from

$7.29

This suspension control arm bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$30.49

KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing

from

$26.49

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing

from

$9.99

This suspension control arm bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$75.99

Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Metal rib design helps lock the inner tube within frame pocket
Metal surfaces are phosphate coated for corrosion protection

from

$70.99

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Loose or worn chassis parts can lead to premature tire wear
Incorporates proven design and engineering features

from

$114.99

Improves steering response
Complete kit for 1 arm
Heat treated steel bushings OR torsional rubber bushings
Reduces vibration

from

$1043.00

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
Provides An Instant Air Source For The Air Helper Springs Or Accessories
Dual Point Fill (Both Air Springs Fill Independently Of Each Other)

from

$703.99

Our Air Command systems give customers the ability to conveniently adjust their air springs with the touch of a button thanks to our Air Command Air Compressor Kits. Our designs provide an instant air source to a vehicle air suspension system, giving users the freedom to adjust their air springs to accommodate different loads and road conditions from both inside and outside of the vehicle.

Product Features:

The Easy To Read Digital Display Is Designed So You Can See It During The Day, But It Does Not Blind You At Night
The Wireless Remote Utilizes A New Sleep Cycle And LED Display That Reduces Energy Use And Improves Battery Life
Easy Installation

from

$12.29

Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.

Product Features:

Made of Superior Hyper-Flex+ Material
Helps Prevent Damage to Control Arm

Upgrade your 1979 Buick Regal with Top-Quality Suspension Parts

When it comes to maintaining or upgrading your 1979 Buick Regal, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Buick or enhancing its overall performance, Suspension Parts are key to keeping your Regal functioning at its best. At Advance Auto Parts, we offer a wide selection of 60 Suspension Parts for the 1979 Buick Regal, designed to meet your needs without breaking the bank. From Air Suspension and Kit replacements to Shocks and Struts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 1979 Buick Regal at great prices. Our Suspension Parts inventory for this model ranges from just $5.29 to $1,043.00, with an average price of $96.89. Our 60 Suspension Parts in stock come from 12 trusted brands, so you’re sure to find the right part for your 1979 Buick Regal without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1979 Buick Regal, we stock popular OEM and aftermarket Suspension Parts from top names like Moog, Monroe, Lakewood, and more. Moog Suspension Parts start at just $17.29 and boast an impressive 4.5 stars average rating from customers. Monroe and Lakewood also bring quality to the table, with Suspension Parts available starting at $49.99, and at an average 4.4 stars rating. With 2,210 customer reviews and counting, our 1979 Buick Regal Suspension Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1979 Buick Regal is always ready to roll. We’re committed to providing you with everything you need to keep your Regal in top shape, all in one place. Start shopping confidently below for your 1979 Buick Regal!

Best-Selling Air Suspension and Kits for 1979 Buick Regals

Enhance the driving experience in your Buick with 6 quality Air Suspension and Kit components, starting at $25.99.

show more show less

from

$46.99

from

$144.99

MAINTAIN RIDE HEIGHT UNDER LOAD – Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission; see owner’s manual)
EASY TO ADJUST – Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor; pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
EXCEPTIONAL HANDLING – Full-displaced valving on compression and extension cycles for a smooth ride
BUILT TO LAST – Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
Special Air Fitting: Resists air leakage.

from

$25.99

from

$1043.00

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
Provides An Instant Air Source For The Air Helper Springs Or Accessories
Dual Point Fill (Both Air Springs Fill Independently Of Each Other)

from

$703.99

The Easy To Read Digital Display Is Designed So You Can See It During The Day, But It Does Not Blind You At Night
The Wireless Remote Utilizes A New Sleep Cycle And LED Display That Reduces Energy Use And Improves Battery Life
Easy Installation

from

$403.99

Product Features:

Incredible Improvement in Control
Maintains Proper Caster and Camber Alignment
Increase in Handling and Control
Greatly Reduce Wheel Hop on Quick Acceleration
Even Braking Control is Improved
Better Suspension Stability

Most Popular 1979 Buick Regal Shocks and Struts

Customize your Buick with 16 Shocks and Struts products like Rear Shock and Struts, Front Shock and Struts, and Strut Bellows, all priced under $122.99.

show more show less

from

$49.99

Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.

Product Features:

Available for import and domestic passenger cars
Gas-charged unit
Improved handling and control
Economical OE replacement
Meets OE product specifications

from

$75.99

Designed to restore a vehicle’s original factory drivability and performance, Monroe OESpectrum passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:

REDUCED NOISE, VIBRATION AND HARSHNESS – Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$122.99

The best all-round choice for vehicles with leaf or coil springs. Properly loads rear wheels to prevent over-reaction and wheel hop.

Product Features:

Excellent Weight Transfer
Lets Front End Down Quickly
Maximum Traction
Makes Vehicle Safer
Easier Control At End Of Track
Better Overall Stability

from

$44.99

Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.

Product Features:

Available for import and domestic passenger cars
Gas-charged unit
Improved handling and control
Economical OE replacement
Meets OE product specifications

from

$36.99

Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.

Product Features:

Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
Gas-charged unit
Improved handling and control
Economical OE replacement
Meets OE product specifications

from

$37.99

Monroe Gas-Matic truck shock absorber are gas charged and provide improved control at an economical price.

Product Features:

Available for import and domestic light trucks and vans
Gas-charged unit
Improved handling and control
Economical OE replacement
Meets OE product specifications

from

$57.99

Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.

Product Features:

KYB Recommended Orem Replacement Shock For Classic, Domestic Cars
The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Vehicle
The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions

from

$26.99

Monroe Shock-Mate Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:

Protects the shock’s piston rod from damage
Universal design for easy installation
Tie-strap included for a secure fit
Constructed from high quality urethane for maximum durability
Multiple color choices available

from

$24.99

Protects the shock’s piston rod from damage
Universal design for easy installation
Tie-strap included for a secure fit
Constructed from high quality urethane for maximum durability
Multiple color choices available

from

$89.99

REDUCED NOISE, VIBRATION AND HARSHNESS – Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$66.99

KYB Recommended Orem Replacement Shock For Classic, Domestic Cars
The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Vehicle
The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
Made In Use
Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions

from

$12.29

Made of Superior Hyper-Flex+ Material
Helps Prevent Damage to Control Arm

from

$122.99

The best all-round choice for vehicles with leaf or coil springs. Properly loads rear wheels to prevent over-reaction and wheel hop.

Product Features:

Excellent Weight Transfer
Lets Front End Down Quickly
Maximum Traction
Makes Vehicle Safer
Easier Control At End Of Track
Better Overall Stability

Nitrogen Gas Charged, 2Year Warranty, Not Adjustable, Without Shock Boot, Single

from

$114.99

Our engineers focused their attention on tuning the low speed compression characteristics of this shock absorber, which is responsible for controlling your Sport Truck or SUV pitch and roll, dive and squat to help keep you confident and in control. The Progressive rebound tuning will complement large aftermarket wheels, keeping the ride smooth but firm and in control.

Product Features:

The Ultimate In Premium Street Performance Solution
Oversized Construction Provides Additional Damping Control
Internal Teflon Coated Bushings And Piston Seals Avoid Metal To Metal Contact, Provides Lowest Possible Friction Resulting In Long Lasting Performance
Increase In Handling And Performance At Maximum Comfort

from

$114.99

The Ultimate In Premium Street Performance Solution
Oversized Construction Provides Additional Damping Control
Internal Teflon Coated Bushings And Piston Seals Avoid Metal To Metal Contact, Provides Lowest Possible Friction Resulting In Long Lasting Performance
Increase In Handling And Performance At Maximum Comfort

from

$107.99

Drag Shock-90/10:GM

Top Picks for 1979 Buick Regal Control Arms

Upgrade Buick Regals with top-quality Control Arms parts, including 23 OEM and aftermarket selections for your 1979 model.

show more show less

from

$38.49

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Metal rib design helps lock the inner tube within frame pocket
Metal surfaces are phosphate coated for corrosion protection

from

$75.99

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Metal rib design helps lock the inner tube within frame pocket
Metal surfaces are phosphate coated for corrosion protection

from

$11.29

Driveworks Brand Control Arm Bushings are made to meet OE specifications. They play a role that isolate the high-frequency inherent vibration from the vehicle. Driveworks Brand chassis parts ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Replacement helps reduce vehicle noise and sway while turning

from

$16.29

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Loose or worn chassis parts can lead to premature tire wear
Incorporates proven design and engineering features

from

$10.99

Control Arm Bushing

from

$44.49

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$41.49

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Metal rib design helps lock the inner tube within frame pocket
Metal surfaces are phosphate coated for corrosion protection

from

$10.49

This suspension control arm bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$66.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$66.99

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$30.99

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$114.99

Improves steering response
Complete kit for 1 arm
Heat treated steel bushings OR torsional rubber bushings
Reduces vibration

from

$49.99

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$44.99

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$36.99

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$25.99

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$23.49

This suspension control arm bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$20.99

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$19.99

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$18.49

This suspension control arm bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$15.99

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$8.99

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$7.29

This suspension control arm bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

In-Demand Coil and Leaf Springs for 1979 Buick Regals

Select from 15 premium Coil and Leaf Springs parts for your 1979 Buick Regal, with prices ranging from $5.29 to $166.99.

show more show less

from

$17.29

Protects spring and spring seat from damage
Replacement helps to reduce noise
Includes insulator and bearing

from

$121.99

REDUCES SAG UNDER LOAD – Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
EXCEPTIONAL HANDLING – Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
LONGER SERVICE LIFE – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
5/8 nitrocarburized rod for long service life.
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Lower Mount Type: Loop Bushing and Cantilever Pin Mount – 1/2″ Stud Diameter X 1 5/16″ Stud Length (Center of Loop to Frame)
Upper Mount Type: Cross Pin Mount – Closed Ended, 5/16″ Hole ID (Both Ends) X 2.7/8″ Pin Length (Hole Center to Center)

from

$114.99

100% Load tested
Easy to install
Provides like-new steering
Designed to lower stresses for longer service life
Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

from

$135.99

100% Load tested
Easy to install
Provides like-new steering
Designed to lower stresses for longer service life
Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

from

$5.29

Protects spring and spring seat from damage
Replacement helps to reduce noise
Includes insulator and bearing

from

$123.99

REDUCES SAG UNDER LOAD – Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
EXCEPTIONAL HANDLING – Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
LONGER SERVICE LIFE – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
5/8 nitrocarburized rod for long service life.
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Lower Mount Type: Cross Pin Mount – Closed Ended, 5/16″ Hole ID (Both Ends) X 2.7/16″ Pin Length (Hole Center to Center)

from

$151.99

100% Load tested
Easy to install
Provides like-new steering
Designed to lower stresses for longer service life
Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

from

$148.99

100% Load tested
Easy to install
Provides like-new steering
Designed to lower stresses for longer service life
Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

from

$151.99

100% Load tested
Easy to install
Provides like-new steering
Designed to lower stresses for longer service life
Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

from

$157.99

100% Load tested
Easy to install
Provides like-new steering
Designed to lower stresses for longer service life
Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

from

$166.99

Coil Springs

from

$138.99

Coil Springs

from

$73.99

COMPLETESTRUTASSMBLY

from

$67.99

COMPLET STRUT ASMBLY

from

$63.99

COMPLETESTRUTASSMBLY

Top-Rated Suspension Parts Brands For Your 1979 Buick Regal

Shop for the best-rated brands offering Suspension Parts and other products for your 1979 Buick Regals. Below you’ll find some of our best rated Suspension Parts from Moog, Monroe, and Lakewood, and more. Suspension Parts from these brands that fit a 1979 Regal start at just $17.29 and are rated as high as 4.5 stars. OEM and aftermarket Suspension Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Moog 1979 Buick Regal Suspension Parts

When it comes to maintaining or upgrading your 1979 Buick Regal, using quality Suspension Parts is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Suspension Parts, specifically designed for the 1979 Buick Regal. With over 3 Moog brand Suspension Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $17.29, with an average price of just $56.92. Plus, with over 14 customer reviews and an average rating of 4.5 stars, you can trust that our Moog Suspension Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $38.49

(8)

Suspension Control Arm Bushing Kit

“just like factory replacement !”

from $114.99

(3)

Coil Spring Set

“Very happy with the springs”

from $17.29

(3)

Coil Spring Insulator

“Placed the insulators on my car.”

Popular Monroe 1979 Buick Regal Suspension Parts

Monroe auto parts is one of the highest quality Suspension Part brands in the market. Any 1979 Buick Regal owner should feel confident when installing genuine Monroe parts in their vehicle. To ensure the best fit and performance for your 1979 Regal, Advance Auto Parts carries a full inventory of 3 Monroe Suspension Parts. Plus you will be keeping your Buick in peak condition while saving money because prices on these Monroe Suspension Parts range from $49.99 to $121.99, plus, with more than 11 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Suspension Parts below will deliver on both quality and value.

from $75.99

(7)

OESpectrum Suspension Shock Absorber

“Good price”

from $121.99

(2)

Load Adjusting Rear Suspension Shock Absorber and Coil Spring Assembly

“Before adding these Shocks all around my ElCaminoSS custom Hot Rod rode hard and was a little low in the rear.Now it floats down the road even a rou”

from $49.99

(2)

Gas-Matic Suspension Shock Absorber

“Easy to install”

FAQs for 1979 Buick Regal Suspension Parts

Which Suspension Parts are best-sellers for 1979 Buick Regals?

Out of 60 Suspension Parts that fit 1979 Buick Regals, the following parts are the top sellers:

Gas-Matic LT Suspension Shock Absorber (5900132) – $36.99
Rear Suspension Shock Absorber Air Hose Kit (5100001) – $46.99
Gas-Matic Suspension Shock Absorber (5900008) – $49.99

What’s the price range for 1979 Buick Regal Suspension Parts?

Suspension Part prices for the 1979 Buick Regal start at $5.29 and go up to $1,043.00 for the most premium parts.

What’s the average price of a Suspension Part for a 1979 Buick Regal?

The average price for Suspension Parts for the 1979 Buick Regal is $96.89. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Suspension Parts for other Buick Regal model years?

Yes, we currently carry Suspension Parts for 37 model years of Buick Regals between 1973 and 2017. Suspension Parts are bought most frequently for the following model years: 2017, 2016, 2015, 2014, 2013, 2012, 2011, 2004, and 2003.

What are the cheapest Suspension Parts for my 1979 Buick Regal?

The cheapest 1979 Buick Regal Suspension Parts we carry in stock are:

Coil Spring Insulator (20516114) – $5.29
Suspension Control Arm Bumper (50211544) – $7.29
Control Arm Bushing (12251993) – $8.99
Lower Control Arm Bumper (22143281) – $10.49
Control Arm Bushing (10577301) – $10.99

What are the top-rated Suspension Parts that fit the 1979 Buick Regal?

Out of 2,210 reviews by customers, our 1979 Buick Regal Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 1979 Buick Regal and their top-rated products:

Coil and Leaf Springs
- Coil Spring Insulator (21880631) – $17.29
- Coil Spring Set (20518892) – $114.99
- Load Adjusting Rear Suspension Shock Absorber and Coil Spring Assembly (19710815) – $121.99
Shocks and Struts
- Coil Spring Insulator (21880631) – $17.29
- Coil Spring Set (20518892) – $114.99
- Load Adjusting Rear Suspension Shock Absorber and Coil Spring Assembly (19710815) – $121.99
Control Arms
- Coil Spring Insulator (21880631) – $17.29
- Coil Spring Set (20518892) – $114.99
- Load Adjusting Rear Suspension Shock Absorber and Coil Spring Assembly (19710815) – $121.99

What types of Suspension Parts do you sell for my 1979 Buick Regal?

As of 3/1/26, these are some of the most in-demand types of Suspension Parts for a 1979 Buick Regal:

Can I get help with 1979 Buick Regal Suspension Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Buick Suspension Parts and more.

What is your return policy for Buick Regal Suspension Parts?

Advance Auto Parts keeps returns simple. For new Buick Regal Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1979 Buick Regal Suspension Parts

Suncore – Complete Strut Assem (Part No.55S15020)

Energy Suspension – Hyper-Flex System (Part No.3.18111G)

Monroe – Max-Air Adjustable Air Shock Absorber Pack of 2 (Part No.MA789)

Monroe – Load Adjusting Rear Suspension Shock Absorber and Coil Spring Assembly (Part No.58574)

Monroe – Strut-Mate Front Suspension Strut Bumper and Bellows Kit (Part No.63633)

MOOG – Strut Bellows (Part No.K90462)

Lakewood – Drag Shock-90/10:GM (Part No.40100)

Suncore – Quick Strut Kit (Part No.2-55S11020-001)

Rare Parts – Coil Springs (Part No.RP45404)

Rare Parts – Coil Springs (Part No.RP45405)

Monroe – Rear Suspension Shock Absorber Air Hose Kit (Part No.AK18)

Monroe – Rear Suspension Shock Absorber Air Hose Kit (Part No.AK64)

MOOG – Coil Spring Set (Part No.CC627)

MOOG – Front Coil Spring Set (Part No.CC670)

Rare Parts – Spring Insulator (Part No.RP53173)

MOOG – Coil Spring Insulator (Part No.K6203-2)

MOOG – Suspension Control Arm Bumper (Part No.K6606)

Dorman – Suspension Control Arm Bumper (Part No.533-615)

KYB – Jounce Bumper and Bellows (Part No.SB113)

KYB – Jounce Bumper and Bellows (Part No.SB132)

Dorman – Suspension Control Arm Bushing Kit (Part No.533-437)

MOOG – Suspension Control Arm Bushing Kit (Part No.K6411)

MOOG – Front Upper Suspension Control Arm Shaft Kit (Part No.K6148)

Rare Parts – Control Arm Shaft Kit (Part No.RP15905)

Firestone Ride-Rite – Controls Two Air Springs Individually, Switch Operated (Part No.2168)

Firestone Ride-Rite – Includes Heavy Duty Compressor/3 Gallon Air Tank/25 Foot Extension Hose (Part No.2239)

Energy Suspension – Control Arm Bump Stop Set (Part No.3.9102R)

Monroe – Rear Suspension Shock Absorber Air Hose Kit (Part No.AK18)

Monroe – Max-Air Adjustable Air Shock Absorber Pack of 2 (Part No.MA789)

Monroe – Rear Suspension Shock Absorber Air Hose Kit (Part No.AK64)

Firestone Ride-Rite – Controls Two Air Springs Individually, Switch Operated (Part No.2168)

Firestone Ride-Rite – Includes Heavy Duty Compressor/3 Gallon Air Tank/25 Foot Extension Hose (Part No.2239)

Energy Suspension – Hyper-Flex System (Part No.3.18110G)

Monroe – Gas-Matic Suspension Shock Absorber (Part No.55840)

Monroe – OESpectrum Suspension Shock Absorber (Part No.5840)

Lakewood – Drag Shock-70/30:GM (Rear) (Part No.40310)

Monroe – Gas-Matic Suspension Shock Absorber (Part No.55802)

Monroe – Gas-Matic LT Suspension Shock Absorber (Part No.59301)

Monroe – Gas-Matic Suspension Shock Absorber (Part No.59087)

KYB – Gas Shock (Part No.343157)

Monroe – Shock-Mate Suspension Shock Absorber Bellows (Part No.SA1997)

Monroe – Shock-Mate Suspension Shock Absorber Bellows (Part No.SA1998)

Monroe – OESpectrum Suspension Shock Absorber (Part No.5802)

KYB – Gas Shock (Part No.343127)

Energy Suspension – Control Arm Bump Stop Set (Part No.3.9102R)

Lakewood – Drag Shock-70/30:GM (Part No.40120)

Belltech – Nitrogen Gas Charged, 2Year Warranty, Not Adjustable, Without Shock Boot, Single (Part No.10102I)

Belltech – Nitrogen Gas Charged, 2Year Warranty, Not Adjustable, Without Shock Boot, Single (Part No.2209IH)

Lakewood – Drag Shock-90/10:GM (Part No.40100)

MOOG – Suspension Control Arm Bushing Kit (Part No.K6176)

MOOG – Suspension Control Arm Bushing Kit (Part No.K6411)

Driveworks – Control Arm Bushing (Part No.DW-K6176)

MOOG – Suspension Control Arm Bumper (Part No.K6606)

Driveworks – Control Arm Bushing (Part No.DW-K6177B)

MOOG – Suspension Control Arm Bushing Kit (Part No.K6178)

MOOG – Suspension Control Arm Bushing Kit (Part No.K6177)

Dorman – Help – Lower Control Arm Bumper (Part No.31061)

Energy Suspension – Control Arm Bushing Set (Part No.3.3171R)

Energy Suspension – Control Arm Bushing Set (Part No.3.3169R)

Rare Parts – Control Arm Bushing (Part No.RP15279)

Rare Parts – Control Arm Shaft Kit (Part No.RP15905)

Rare Parts – Control Arm Bushing (Part No.RP17069)

MOOG – Suspension Control Arm Bushing Kit (Part No.K6421)

Rare Parts – Control Arm Bushing (Part No.RP15222)

Rare Parts – Control Arm Bushing (Part No.RP15158)

Dorman – Suspension Control Arm Bushing Kit (Part No.533-445)

Rare Parts – Control Arm Bushing (Part No.RP22118)

Rare Parts – Control Arm Bushing (Part No.RP17318)

Dorman – Suspension Control Arm Bushing Kit (Part No.533-444)

Rare Parts – Control Arm Bushing (Part No.RP17315)

Rare Parts – Control Arm Bushing (Part No.RP15011)

Dorman – Suspension Control Arm Bumper (Part No.533-615)

MOOG – Coil Spring Insulator (Part No.K160044)

Monroe – Load Adjusting Rear Suspension Shock Absorber and Coil Spring Assembly (Part No.58411)

MOOG – Coil Spring Set (Part No.5379)

MOOG – Coil Spring Set (Part No.CC627)

MOOG – Coil Spring Insulator (Part No.K6203-2)

Monroe – Load Adjusting Front Suspension Shock Absorber and Coil Spring Assembly (Part No.58270)

MOOG – Coil Spring Set (Part No.5608)