1979 BMW 633CSi Engine Parts
Find Your Specific 1979 BMW 633CSi Engine Parts
Below you will find various in-demand BMW Engine Parts, components and accessories for your 1979 633CSi. Advance Auto Parts has popular 633CSi parts like Valve Cover and Cylinder Heads, Engine Timing Parts, Camshafts and more. You’ll also find aftermarket and OEM Engine Parts for other 633CSi model years including
1978,
1980,
1981,
1982,
1983,
1984 and more. Select a category of 1979 BMW 633CSi Engine Parts below and start saving instantly.
Popular 1979 BMW 633CSi Engine Parts Categories
Essential Engine Parts for 1979 BMW 633CSis
Iwis – Timing Chain (Part No.A5100670327IWI)
from
$48.17
Timing Chain
Carquest Premium – ABS Wheel Speed Sensor Connector (Part No.ABA3461)
from
$12.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
KS – KS Rod Bearing Set (Part No.A203026481KS)
from
$65.64
KS rod bearing sets provide maximum load-bearing capacity, anti-seize and low wear and friction. KS rod bearing sets are manufactured with aluminum-tin sliding material and the innovative aluminum-zinc-bismuth alloy in which bismuth replaces lead. From the strands continuously cast on site, strip is generated in defined and coordinated rolling and annealing operations for subsequent cladding. The various steel-aluminum composites are finally produced by roll bonding. Innovative coatings also ensure optimal running-in behavior and low-wear continuous running. The spectrum of possible surface coatings at KS Gleitlager extends from galvanic films deposited electro-chemically and sputter layers applied electro-physically in a high vacuum, to synthetic antifriction coatings.
Product Features:
See More
Product Features:
- Original Equipment Manufacturer
- Maximum Load-Bearing Capacity
- Low Wear and Friction
- Advanced Surface Coatings
Carquest Premium – Engine Oil Filler Cap: 10079, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10079)
from
$8.29
Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
Product Features:
See More
Product Features:
- Provides proper seal to ensure leak prevention
- Stops engine blow by
- High quality construction
- Meets all OEM specifications
Laso – Valve Adjust Nut (Part No.A413039412LAS)
from
$1.15
Valve Adjust Nut
Elring – SEAL RING – COPPER (Part No.4M20011240ELR)
from
$1.18
SEAL RING – COPPER
FAG US – GENERAL SEAL (Part No.SS2662)
from
$10.49
GENERAL SEAL
TRW – TRW Exhaust Valve (Part No.A405015042TRW)
from
$27.30
TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.
Product Features:
See More
Product Features:
- OE Quality
- Optimized for strength
- Heat and corrosion resistant
- Chromium plated or nitrided
- Stem optimized to resist wear
Carquest Premium – Coolant Temperature Sensor with Thread Sealant and Washer (Part No.WTC1057)
from
$27.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Glyco – Glyco Main Bearing Set (Part No.A201041520GLY)
from
$156.98
Glyco advanced engine bearing technologies withstand heavy loads and cope with the increasingly challenging conditions of modern, environmentally-friendly engines. Glyco is the world’s largest manufacturer of OE-quality bearings. Every year, our engine bearings are fitted on more than 10 million engines around the world – from small bore engines to heavy-duty commercial vehicles and stationary engines. Driven by the need to reduce CO2 emissions, today’s engines extract more power from less fuel. Due to the increased temperature and load, conventional bearings struggle to cope. Thanks to over 100 years of innovation, Glyco provides bearings with advanced metallurgy that can withstand these challenges. Federal-Mogul invented Glyco Sputter Bearings with twice the service life of conventional bearings. Glyco developed G-188, the first intelligent bearing material, and were also first to launch a full lead-free material portfolio. Recent innovations include the highly durable Glyco IROX bearing shells, which address the challenges of hybrid, stop-start and downsized engines.
Product Features:
See More
Product Features:
- Original Equipment Quality
- Excellent wear resistance
- Low propensity to seize
- Reduction in Friction
Febi – Valve Adjust Eccentr (Part No.A425039408FEB)
from
$8.30
Valve Adjust Eccentr
National – Redi-Sleeve (Part No.99353)
from
$82.99
Redi-Sleeve
Febi – Valve Adjust Bolt (Part No.A411939409FEB)
from
$2.73
Valve Adjust Bolt
Febi – Rocker Arm (Part No.A404015010FEB)
from
$35.06
Rocker Arm
Corteco – Crankshaft Seal (Part No.A806091566CFW)
from
$38.88
Crankshaft Seal
National – Multi Purpose Seal (Part No.229005)
from
$39.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Febi – EXHAUST NUT (Part No.H1001570904FEB)
from
$2.19
EXHAUST NUT
Iwis – Timing Chain (Part No.A510014935IWI)
from
$80.79
Timing Chain
CRP – Seal Ring – Aluminum (Part No.4M10011207CRP)
from
$1.07
Seal Ring – Aluminum
Elring – SEAL RING (Part No.A8092118638ELR)
from
$1.21
SEAL RING
Febi – Freeze Plug (Part No.A103014658FEB)
from
$3.11
Freeze Plug
Febi – Freeze Plug (Part No.A103028276FEB)
from
$2.30
Freeze Plug
APA/URO Parts – Valve Cover Nut (Part No.A3110294267APA)
from
$3.15
Valve Cover Nut
Upgrade your 1979 BMW 633CSi with Top-Quality Engine Parts
When it comes to maintaining or upgrading your 1979 BMW 633CSi, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Engine Parts are key to keeping your 633CSi functioning at its best. At Advance Auto Parts, we offer a wide selection of 31 Engine Parts for the 1979 BMW 633CSi, designed to meet your needs without breaking the bank.
From
Valve Cover and Cylinder Head
replacements to
Engine Timing Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1979 BMW 633CSi at great prices.
Our Engine Parts inventory for this model
ranges from just $1.15 to $156.98, with
an average price of $28.71.
Our 31 Engine Parts in stock come from 12 trusted brands, so you’re sure to find the right part for your 1979 BMW 633CSi without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1979 BMW 633CSi, we stock popular OEM and aftermarket Engine Parts from top names
like Carquest Premium, and more.
Carquest Premium Engine Parts
start at just $8.29 and boast an impressive 4 stars average rating from customers.
With 4 customer reviews and counting, our 1979 BMW 633CSi Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1979 BMW 633CSi is always ready to roll. We’re committed to providing you with everything you need to keep your 633CSi in top shape, all in one place.
Start shopping confidently below for your 1979 BMW 633CSi!
Best-Selling Valve Cover and Cylinder Heads for 1979 BMW 633CSis
Enhance the driving experience in your BMW with 10 quality Valve Cover and Cylinder Head components, starting at $1.15.
Carquest Premium – Coolant Temperature Sensor with Thread Sealant and Washer (Part No.WTC1057)
from
$27.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Elring – Cylinder Head Gasket (Part No.A81003156993ELR)
from
$107.20
Cylinder Head Gasket
Febi – Rocker Arm (Part No.A404015010FEB)
from
$35.06
Rocker Arm
TRW – TRW Exhaust Valve (Part No.A405015042TRW)
from
$27.30
TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.
Product Features:
See More
Product Features:
- OE Quality
- Optimized for strength
- Heat and corrosion resistant
- Chromium plated or nitrided
- Stem optimized to resist wear
Febi – Valve Adjust Eccentr (Part No.A425039408FEB)
from
$8.30
Valve Adjust Eccentr
TRW – Valve Guide (Part No.A306014690TRW)
from
$7.02
Valve Guide
APA/URO Parts – Valve Cover Nut (Part No.A3110294267APA)
from
$3.15
Valve Cover Nut
Febi – Valve Adjust Bolt (Part No.A411939409FEB)
from
$2.73
Valve Adjust Bolt
Febi – Valve Adjust Nut (Part No.A413039412FEB)
from
$1.54
Valve Adjust Nut
Laso – Valve Adjust Nut (Part No.A413039412LAS)
from
$1.15
Valve Adjust Nut
Most Popular 1979 BMW 633CSi Engine Timing Parts
Customize your BMW with 1 Engine Timing Parts products
like Timing Chains, all
priced under $80.79.
Iwis – Timing Chain (Part No.A510014935IWI)
from
$80.79
Timing Chain
Top Picks for 1979 BMW 633CSi Camshafts
Upgrade BMW 633CSis with top-quality Camshafts parts, including 5 OEM and aftermarket selections for your 1979 model.
Carquest Premium – A/C Compressor Cut-Out Switch Harness Connector (Part No.ABA3459)
from
$19.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
National – Multi Purpose Seal (Part No.223010)
from
$14.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Carquest Premium – ABS Wheel Speed Sensor Connector (Part No.ABA3461)
from
$12.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
National – Shaft Repair Sleeve (Part No.99114)
from
$27.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
FAG US – GENERAL SEAL (Part No.SS2662)
from
$10.49
GENERAL SEAL
In-Demand Engine Gaskets and Seals for 1979 BMW 633CSis
Select from 2 premium Engine Gaskets and Seals parts for your 1979 BMW 633CSi, with prices ranging from $1.18 to $1.21.
Elring – SEAL RING (Part No.A8092118638ELR)
from
$1.21
SEAL RING
Elring – SEAL RING – COPPER (Part No.4M20011240ELR)
from
$1.18
SEAL RING – COPPER
Most Sold 1979 BMW 633CSi Engine Internals
Explore our best-selling BMW parts for the 1979 633CSi among 7 OEM and aftermarket options starting from $10.49.
National – Multi Purpose Seal (Part No.229005)
from
$39.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.224250)
from
$10.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
KS – KS Rod Bearing Set (Part No.A203026481KS)
from
$65.64
KS rod bearing sets provide maximum load-bearing capacity, anti-seize and low wear and friction. KS rod bearing sets are manufactured with aluminum-tin sliding material and the innovative aluminum-zinc-bismuth alloy in which bismuth replaces lead. From the strands continuously cast on site, strip is generated in defined and coordinated rolling and annealing operations for subsequent cladding. The various steel-aluminum composites are finally produced by roll bonding. Innovative coatings also ensure optimal running-in behavior and low-wear continuous running. The spectrum of possible surface coatings at KS Gleitlager extends from galvanic films deposited electro-chemically and sputter layers applied electro-physically in a high vacuum, to synthetic antifriction coatings.
Product Features:
See More
Product Features:
- Original Equipment Manufacturer
- Maximum Load-Bearing Capacity
- Low Wear and Friction
- Advanced Surface Coatings
Glyco – Glyco Main Bearing Set (Part No.A201041520GLY)
from
$156.98
Glyco advanced engine bearing technologies withstand heavy loads and cope with the increasingly challenging conditions of modern, environmentally-friendly engines. Glyco is the world’s largest manufacturer of OE-quality bearings. Every year, our engine bearings are fitted on more than 10 million engines around the world – from small bore engines to heavy-duty commercial vehicles and stationary engines. Driven by the need to reduce CO2 emissions, today’s engines extract more power from less fuel. Due to the increased temperature and load, conventional bearings struggle to cope. Thanks to over 100 years of innovation, Glyco provides bearings with advanced metallurgy that can withstand these challenges. Federal-Mogul invented Glyco Sputter Bearings with twice the service life of conventional bearings. Glyco developed G-188, the first intelligent bearing material, and were also first to launch a full lead-free material portfolio. Recent innovations include the highly durable Glyco IROX bearing shells, which address the challenges of hybrid, stop-start and downsized engines.
Product Features:
See More
Product Features:
- Original Equipment Quality
- Excellent wear resistance
- Low propensity to seize
- Reduction in Friction
National – Redi-Sleeve (Part No.99353)
from
$82.99
Redi-Sleeve
Corteco – Crankshaft Seal (Part No.A806091566CFW)
from
$38.88
Crankshaft Seal
FAG US – SHAFT SEAL (Part No.SS3383)
from
$33.49
SHAFT SEAL
Top-Rated Engine Parts Brands For Your 1979 BMW 633CSi
Shop for the best-rated brands offering Engine Parts and other products for your 1979 BMW 633CSis. Below you’ll find some of our best rated Engine Parts from Carquest Premium, and more. Engine Parts from these brands that fit a 1979 633CSi start at just $8.29 and are rated as high as 4 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Carquest Premium 1979 BMW 633CSi Engine Parts
When it comes to maintaining or upgrading your 1979 BMW 633CSi, using quality Engine Parts is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Engine Parts, specifically designed for the 1979 BMW 633CSi. With over 4 Carquest Premium brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $8.29, with an average price of just $17.19. Plus, with over 4 customer reviews and an average rating of 4 stars, you can trust that our Carquest Premium Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
FAQs for 1979 BMW 633CSi Engine Parts
Which Engine Parts are best-sellers for 1979 BMW 633CSis?
Out of 31 Engine Parts that fit 1979 BMW 633CSis, the following parts are the top sellers:
- Coolant Temperature Sensor with Thread Sealant and Washer (12422791) – $27.99
- Multi Purpose Seal (18442751) – $39.99
- A/C Compressor Cut-Out Switch Harness Connector (12443066) – $19.99
What’s the price range for 1979 BMW 633CSi Engine Parts?
Engine Part prices for the 1979 BMW 633CSi start at $1.15 and go up to $156.98 for the most premium parts.
What’s the average price of a Engine Part for a 1979 BMW 633CSi?
The average price for Engine Parts for the 1979 BMW 633CSi is $28.71. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Engine Parts for other BMW 633CSi model years?
What are the cheapest Engine Parts for my 1979 BMW 633CSi?
The cheapest 1979 BMW 633CSi Engine Parts we carry in stock are:
- Valve Adjust Nut (10729338) – $1.15
- SEAL RING – COPPER (11263320) – $1.18
- SEAL RING (11075008) – $1.21
- Valve Adjust Nut (11195377) – $1.54
- EXHAUST NUT (11261448) – $2.19
What types of Engine Parts do you sell for my 1979 BMW 633CSi?
As of 2/5/25, these are some of the most in-demand types of Engine Parts for a 1979 BMW 633CSi:
Can I get help with 1979 BMW 633CSi Engine Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Engine Parts and more.
What is your return policy for BMW 633CSi Engine Parts?
Advance Auto Parts keeps returns simple. For new BMW 633CSi Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
