1978 Oldsmobile Custom Cruiser Performance and Racing Products

Essential Performance and Racing Products for 1978 Oldsmobile Custom Cruisers

MSD Ignition – Distributor Cap; GM HEI; Red (Part No.8411)

Distributor Cap; GM HEI; Red

from

$49.49
The cap of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap. To make things easy, we now offer these caps as replacement kits.

Product Features:
  • Stock GM HEI replacement distributor cap
  • Red
See More

Edelbrock – Universal Performer EFI Dry Systems for 4, 6 And 8 Cylinder Engine (50-70 Hp) (Part No.71006)

Universal Performer EFI Dry Systems for 4, 6 And 8 Cylinder Engine (50-70 Hp)

from

$926.99


Product Features:
  • Best Way To Get A Major Power Increase
  • Power Increases From 50-70 HP
  • Work With Stock ECU
  • Simple Installation
  • Detailed Instructions
See More

Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)

Thermocap Radiator Cap

from

$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:
  • Indicates coolant temperature
  • Helps prevent coolant injuries
  • Fahrenheit and centigrade readings
  • Color-coded temperature ranges
  • Integrated coolant reclamation valve
  • Improves under-hood appearance
  • Chromed crown with a colored trim ring
See More

B & M – Torque Converter, Holeshot 3000 (Part No.70421)

Torque Converter, Holeshot 3000

from

$789.99
The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some GM Holeshots.

Product Features:
  • Furnace Brazed Impeller
  • Steel Alloy Pump Drive Tube
  • Heavy Duty Needle Bearing
  • Between Stator and Turbine
  • Furnace Brazed Turbine
See More

Lakewood – Drag Shock-70/30:GM (Rear) (Part No.40310)

Drag Shock-70/30:GM (Rear)

from

$104.99
The best all-round choice for vehicles with leaf or coil springs. Properly loads rear wheels to prevent over-reaction and wheel hop.

Product Features:
  • Excellent Weight Transfer
  • Lets Front End Down Quickly
  • Maximum Traction
  • Makes Vehicle Safer
  • Easier Control At End Of Track
  • Better Overall Stability
See More

Hurst – Automatic Shifter, Quarter Stick Powerglide (Part No.3160001)

Automatic Shifter, Quarter Stick Powerglide

from

$429.99
The Hurst Quarter Stick is designed for 2 and 3 speed applications. Its precision gate style mechanism ensures a positive feel. It features, a neutral safety switch, NHRA approved reverse lockout, and a brushed aluminum cover.

Product Features:
  • Forward and Reverse Shift Patterns
  • Chrome Plated Trigger for Detent Activity
  • Factory Neutral Safety Switch
  • Compact And Lightweight
  • Roller Detent with Shifter Pattern
See More

Mr. Gasket – Oil Pan (Part No.5415)

Oil Pan

from

$329.99
This fully polished, finned aluminum oil pan is die-cast for a perfect fit. 5 quart capacity. Drain plug & bolts included.

Product Features:
  • Die Cast Aluminum w/ Finned Bottom
  • Polished
  • Includes Drain Plug and Mounting Bolts
  • 5 Quart Capacity
See More

PerTronix – D9001 Flame-Thrower HEI Distributor Advance Curve Kit (Part No.D9001)

D9001 Flame-Thrower HEI Distributor Advance Curve Kit

from

$26.99
Mechanical Advance Curve Ki tPrecision machined chromoly weights and center plate eliminate erratic timing. Three sets of springs, guide bushings and complete installation instructions make recurving your distributor easy.

Product Features:
  • PerTronix D9001 Flame-Thrower HEI Distributor Advance Curve Kit
  • Precision machined chromoly weights and center plate.
See More

Edelbrock – Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for Chevrolet (Part No.7361)

Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for Chevrolet

from

$128.99
Product Features:
  • Provides excellent sealing and conformability
  • Releases+N747 clean without sticking, if the engine needs to be disassembled
  • Perfect companion for Edelbrock cylinder heads and intake manifolds
  • Does not include end seals
  • Use of a silicone sealant in place of end seal is recommended
See More

Competition Cams – CAMSHAFT, SBC 284 XTREME ENERGY HYDRAULIC 1 EA (Part No.12-250-3)

CAMSHAFT, SBC 284 XTREME ENERGY HYDRAULIC 1 EA

from

$258.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

Product Features:
  • Excellent performance in street carbureted applications.
  • More vacuum allows an increase in duration for improved performance and assists power brakes.
  • Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
  • Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
See More

Powertrax – Lock Right Locker (Part No.1921-LR)

Lock Right Locker

from

$368.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Mallory – Mallory Unilite Dist.: Pontiac 301-455 (Part No.3758001)

    Mallory Unilite Dist.: Pontiac 301-455

    from

    $538.99
    The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.

    Product Features:
    • Improved Combustion And Economy
    • Increased Spark Plug Life
    • Improved Cold Weather Starting
    • Maintenance Free Operation
    • Accurate Spark Timing
    • Self-Lubricating Bushings
    • Years Of Trouble-Free Service
    See More

    Motive Gear – Performance Differential Ring and Pinion (Part No.G885373)

    Performance Differential Ring and Pinion

    from

    $229.99


    Product Features:
    • GM 10BL 8.5 R/P 3.73 FRT/REAR MGP
    See More

    Edelbrock – VALVE COVERS (Part No.4249)

    VALVE COVERS

    from

    $117.99
    Product Features:
    • Polished Finish
    • Raised Fins w/Black Mat Background
    • Detailed With Allen Hex Heads
    • 2 Piece Look; 1 Piece Construction
    • Clears Most Roller Rockers
    • Clears Valvetrain Components
    • Heavy Gauge
    See More

    Mallory – Distributor Wiring Harness (Part No.29349)

    Distributor Wiring Harness

    from

    $30.49


    Product Features:
    • Service Part
    • Makes Connections Quick And Easy
    See More

    Mr. Gasket – Differential Cover Kit (Part No.9896)

    Differential Cover Kit

    from

    $64.99
    The Mr. Gasket chrome plated rear end cover is made from heavy-gauge steel and comes complete with bolts and gaskets.

    Product Features:
    • Chrome plated steel for looks
    • Includes bolts and gasket
    See More

    Accel – Distributor Cap And Rotor Kit (Part No.8124)

    Distributor Cap And Rotor Kit

    from

    $48.49


    Product Features:
    • Heavy Duty Cap and Rotor Kit
    • With Brass Inserts
    See More

    Edelbrock – Concealed Nitrous Kits for Carbureted Applications (20-30 Hp) (Part No.70027)

    Concealed Nitrous Kits for Carbureted Applications (20-30 Hp)

    from

    $320.99


    Product Features:
    • Easily Concealable
    • Install In Minutes
    • Quick Removal
    • No Obvious Signs Of Installation
    • No Obvious Signs Of Use
    See More

    Energy Suspension – Transmission Mount (Part No.3.1132R)

    Transmission Mount

    from

    $89.99
    A true performance application component for cars, trucks, hot rods, racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.

    Product Features:
    • Unique Safety Interlock Design
    • Impervious to Vehicle Oils and Chemicals
    • Strong Enough Too Handle High Performance
    See More

    Energy Suspension – Coil Spring Isolator Set (Part No.3.6108G)

    Coil Spring Isolator Set

    from

    $12.99
    Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.

    Product Features:
    • Made of Superior Hyper-Flex+ Material
    • Lasts from 3 to 10 Times Longer
    • Assemble to Chassis Same Way as OEM
    • Maintains Factory Ride Characteristics
    • Simple Way to Increase Vehicle Height
    See More

    Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

    High Performance 180 Degree Thermostat for Increased Flow

    from

    $26.99
    Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

    Product Features:
    • Opens At 180 Degrees
    • Designed to Resist Large Variations of Coolant Pressure at High RPM
    • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
    • For High Performance Street, Drag Race, and Oval Track
    • Copper & Brass Construction – Resists Corrosion
    • High Flow
    See More

    Energy Suspension – Control Arm Bushing Set (Part No.3.3167G)

    Control Arm Bushing Set

    from

    $57.99
    For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

    Product Features:
    • Maintains Better Alignment While Driving
    • Full Floating and Non Binding
    • Fits Into the Remaining Stock Control Arms
    See More

    Energy Suspension – High Performance Sway Bar End Link Kit with Hardware (Part No.9.8117R)

    High Performance Sway Bar End Link Kit with Hardware

    from

    $26.99
    Made of high durometer, very firm, Hyper-Flex performance polyurethane. They’re economical, increase efficiency and are easy to install. Use Energy Suspension sway bar end links with sway bar bushings to get the maximum performance benefit. Combine both for the same effect as buying a larger sway bar. Together they offer a dramatic improvement in performance and handling.

    Product Features:
    • Made from HYPER-Flex Polyurethane
    • Allows Vehicle to Work At Maximum Efficiency
    • Easy to Install
    • Superior Performance and Greater Longevity
    • Lasts Much Longer Than OEM Rubber End Links
    See More

    Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

    Tie Rod Dust Boot

    from

    $9.99
    Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

    Product Features:
    • Easy to Install
    • Superior Material
    • Saves Your Tie Rods
    • Lasts Longer
    • Looks Great
    See More

    Energy Suspension – Ball Joint Dust Boot Set (Part No.9.13128R)

    Ball Joint Dust Boot Set

    from

    $10.99
    Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

    Product Features:
    • Easy to Install
    • Superior Material
    • Lasts Longer
    • Looks Great
    See More

    B & M – Transpak For 68-81 TH 350 Transmission (Part No.30228)

    Transpak For 68-81 TH 350 Transmission

    from

    $141.99
    The B&M Transpak has all the features in the Shift Improver Kit, plus it provides additional driver manual control. Retain full automatic features and standard shift points with selector in Drive.

    Product Features:
    • Recalibrate Auto. Transmission
    • Optimum Performance
    • Select Your App. Mode
    • Improves Transmission Life
    • Trans. Removal Not Required
    See More

    B & M – Transmission Kit, Master Overhaul Kit For TH400 (Part No.21041)

    Transmission Kit, Master Overhaul Kit For TH400

    from

    $409.99
    These kits include all of the necessary components to rebuild your automatic transmission. OEM style gaskets included. Kits do not include overhaul instructions – please refer to factory shop manual for proper assembly procedures.

    Product Features:
    • Complete High Perf. Or Racing Trans. Overhaul
    • Includes Only OEM Valvebody Gaskets
    • Instructions Not Included
    See More

    B & M – Transkit For 87-93 TH700R4 Transmission (Part No.70233)

    Transkit For 87-93 TH700R4 Transmission

    from

    $564.99
    A B&M transmission in a box! Transform your automatic transmission into a full-tilt B&M performer! This is our ultimate transmission kit – it comes complete with full instructions on how to assemble your transmission to B&M specifications.

    Product Features:
    • High Perf. Friction Materials
    • Complete Overhaul Gasket Set
    • Modification Components
    • Replacement Valves
    • Replacement Springs
    • Drain Plug Kit Included
    See More

    Upgrade your 1978 Oldsmobile Custom Cruiser with Top-Quality Performance and Racing Products

    When it comes to maintaining or upgrading your 1978 Oldsmobile Custom Cruiser, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Oldsmobile or enhancing its overall performance, Performance and Racing Products are key to keeping your Custom Cruiser functioning at its best. At Advance Auto Parts, we offer a wide selection of 105 Performance and Racing Products for the 1978 Oldsmobile Custom Cruiser, designed to meet your needs without breaking the bank. From Performance Distributor replacements to Performance Ignition Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

    Affordable Prices and Wide Selection

    Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1978 Oldsmobile Custom Cruiser at great prices. Our Performance and Racing Products inventory for this model ranges from just $9.99 to $1,138.99, with an average price of $307.46. Our 105 Performance and Racing Products in stock come from 15 trusted brands, so you’re sure to find the right part for your 1978 Oldsmobile Custom Cruiser without overspending.

    Top Brands and High Customer Satisfaction

    Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1978 Oldsmobile Custom Cruiser, we stock popular OEM and aftermarket Performance and Racing Products from top names like MSD Ignition, Energy Suspension, Mr. Gasket, and more. MSD Ignition Performance and Racing Products start at just $13.29 and boast an impressive 4 stars average rating from customers. Energy Suspension and Mr. Gasket also bring quality to the table, with Performance and Racing Products available starting at $9.99, and at an average 4 stars rating. With 482 customer reviews and counting, our 1978 Oldsmobile Custom Cruiser Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

    Explore Related Parts and More

    While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1978 Oldsmobile Custom Cruiser is always ready to roll. We’re committed to providing you with everything you need to keep your Custom Cruiser in top shape, all in one place. Start shopping confidently below for your 1978 Oldsmobile Custom Cruiser!

    Best-Selling Performance Distributors for 1978 Oldsmobile Custom Cruisers

    Enhance the driving experience in your Oldsmobile with 9 quality Performance Distributor components, starting at $10.99.

    PerTronix – D9001 Flame-Thrower HEI Distributor Advance Curve Kit (Part No.D9001)

    D9001 Flame-Thrower HEI Distributor Advance Curve Kit

    from

    $26.99
    Mechanical Advance Curve Ki tPrecision machined chromoly weights and center plate eliminate erratic timing. Three sets of springs, guide bushings and complete installation instructions make recurving your distributor easy.

    Product Features:
    • PerTronix D9001 Flame-Thrower HEI Distributor Advance Curve Kit
    • Precision machined chromoly weights and center plate.
    See More

    MSD Ignition – Distributor Cap; GM HEI; Red (Part No.8411)

    Distributor Cap; GM HEI; Red

    from

    $49.49
    The cap of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap. To make things easy, we now offer these caps as replacement kits.

    Product Features:
    • Stock GM HEI replacement distributor cap
    • Red
    See More

    MSD Ignition – Distributor Cap and Rotor; GM HEI Distributor; Red (Part No.8416)

    Distributor Cap and Rotor; GM HEI Distributor; Red

    from

    $46.49
    The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.

    Product Features:
    • Designed w/Performance In Mind
    • High Quality Material
    • Stainless Terminals
    • Performance replacement part
    See More

    PerTronix – D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor (Part No.D9007)

    D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor

    from

    $30.99
    Wiring Harness and CapacitorPremium quality wire harness and capacitor insure good connection and “static free” operation.

    Product Features:
    • PerTronix D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor
    • Premium quality wire harness and capacitor.
    See More

    MSD Ignition – Rotor; GM HEI (Part No.8410)

    Rotor; GM HEI

    from

    $13.29
    Replacement rotor for Chevrolet HEI style distributors.

    Product Features:
    • For HEI distributors
    • Resist carbon tracking
    • Low resistance brass
    • Max voltage transfer
    • Molded from insulated material
    See More

    PerTronix – D4061 Flame-Thrower HEI Distributor Rotor Red (Part No.D4061)

    D4061 Flame-Thrower HEI Distributor Rotor Red

    from

    $15.99
    Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

    Product Features:
    • Made from hi-performance 60 KV rated alkyd molding compound.
    • Cap and rotor kits include nylon rotor hold-down screws.
    • Flame-Thrower dust covers provide a larger air gap around the coil.
    See More

    MSD Ignition – Distributor; Oldsmobile V8; Ready-to-Run (Part No.8529)

    Distributor; Oldsmobile V8; Ready-to-Run

    from

    $647.99
    Die hard Oldsmobile enthusiasts have been asking about a Ready-to-Run distributor and here it is! Ready-to-Run means just that, drop it in the engine, connect three wires and fire up your olds. Inside the billet aluminum housing there is a high-output inductive ignition module that lights the spark. This module now has a built-in rev limiter to protect your olds from overrev protection damage. A polished steel shaft spins in the center of this module and is guided by a sealed ball bearing for great stability. Another great benefit of the MSD Ready-to-Run distributor is the mechanical advance. The weights and assembly are fine-blanked from chromoly for absolute precision resulting in smooth timing changes. You can set up a timing curve to match your engine’s specifications easily with the supplied advance springs and bushings plus there is a vacuum advance for economy. The distributor is supplied with the MSD cap, race rotor, wire retainer and gear.

    Product Features:
    • Simple and clean three wire installation
    • CARB E.O. Approved
    • Does not require an MSD Ignition Control
    • Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
    • Nylon pads ensure smooth operation of the advance weights
    • Advance weight pins are staked and tig welded to the plate
    • Mech. advance assem. can be locked out for crank trigger systems
    • Advance plate and weights are fine blanked from chrome moly steel
    See More

    PerTronix – D4062 Flame-Thrower HEI Distributor Rotor Blue (Part No.D4062)

    D4062 Flame-Thrower HEI Distributor Rotor Blue

    from

    $15.99
    Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

    Product Features:
    • Made from hi-performance 60 KV rated alkyd molding compound.
    • Cap and rotor kits include nylon rotor hold-down screws.
    • Flame-Thrower dust covers provide a larger air gap around the coil.
    See More

    PerTronix – D4260 Flame-Thrower Distributor Rotor HEI/EST Black (Part No.D4260)

    D4260 Flame-Thrower Distributor Rotor HEI/EST Black

    from

    $10.99
    Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

    Product Features:
    • Made from hi-performance 60 KV rated alkyd molding compound.
    • Cap and rotor kits include nylon rotor hold-down screws.
    • Flame-Thrower dust covers provide a larger air gap around the coil.
    See More

    Most Popular 1978 Oldsmobile Custom Cruiser Performance Ignition Products

    Customize your Oldsmobile with 6 Performance Ignition Products products like Performance Coils, Performance Vacuum Advances, and Performance Ignition Parts, all priced under $186.99.

    Mallory – Unilite Ignition Module (Part No.605)

    Unilite Ignition Module

    from

    $85.29
    Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

    Product Features:
    • Service Part
    • No Moving Parts To Wear Out
    • Self Contained Unit
    • Can Drive OEM
    • Can Drive High Performance Ignition Coils
    See More

    Accel – GM Hei Supercoil Red/White (Part No.140005)

    GM Hei Supercoil Red/White

    from

    $113.99
    Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.

    Product Features:
    • 10-15% More Energy
    • Direct Plug In Replacement Direct OE Fit
    • Advanced Bobbin Technology
    • Highly Specialized Silicone Magnetic Steel Cores
    • Similar to Standard Motor Products SMP Dr-32
    • Long Life And Great Looks
    See More

    Mallory – Distributor Wiring Harness (Part No.29349)

    Distributor Wiring Harness

    from

    $30.49


    Product Features:
    • Service Part
    • Makes Connections Quick And Easy
    See More

    Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

    Promaster Classic Series; Ignition Coil

    from

    $186.99
    Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

    Product Features:
    • Glass Filled Polyester Case
    • Longer Spark Duration
    • Increased Performance
    • No Energy Loss Due To Arcing
    • Includes Brass Contact Terminal
    See More

    MSD Ignition – Mod HEI Dust Cover, V8 & Odd Fire V6 (Part No.8401)

    Mod HEI Dust Cover, V8 & Odd Fire V6

    from

    $72.99
    Stock style replacement modified HEI coil dust cover. Used on 8 cylinder vehicles only.

    Product Features:
    • Externally mounted coil
    • Increases reliability
    • Increase performance
    • High quality plastic
    • Resist spark loss
    • Use brass conductors
    • Low resistance connections
    • No modifications
    See More

    Mr. Gasket – HEI Adjustable Vacuum Advance Kit – Includes weights, camplate, and bushings – Improve performance (Part No.6011)

    HEI Adjustable Vacuum Advance Kit - Includes weights, camplate, and bushings - Improve performance

    from

    $55.99
    HEI Adjustable Vacuum Advance Kit – Includes weights, camplate, and bushings – Improve performance

    Top Picks for 1978 Oldsmobile Custom Cruiser Performance Fuel Systems

    Upgrade Oldsmobile Custom Cruisers with top-quality Performance Fuel Systems parts, including 10 OEM and aftermarket selections for your 1978 model.

    Edelbrock – Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1411)

    Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet

    from

    $494.99
    The Edelbrock 1411 Performer Series 750 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist

    Product Features:
    • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
    • Electric Choke
    • 4 Barrel Count
    • Square Bore
    • Smooth Secondary Transition
    • Both Timed and Full Vacuum Ports
    • Includes PCV Outlet
    See More

    Edelbrock – CARBURETOR (Part No.14054)

    CARBURETOR

    from

    $488.99
    Product Features:
    • EnduraShine Finish
    • GM/AMC-Style Throttle Linkage
    • Can Add Electric Choke PN[1478]
    • Easy Tuning with 2-Piece Design
    • Smooth Secondary Transition
    • Both Timed and Full Vacuum Ports
    • Includes PCV Outlet
    See More

    Edelbrock – Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1406)

    Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet

    from

    $428.99
    The Edelbrock 1406 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1406 Performer Series 600 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.

    Product Features:
    • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
    • Electric Choke
    • 4 Barrel Count
    • Square Bore
    • Smooth Secondary Transition
    • Both Timed and Full Vacuum Ports
    • Includes PCV Outlet
    See More

    Edelbrock – Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1405)

    Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet

    from

    $394.99
    The Edelbrock 1405 Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1405 Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.

    Product Features:
    • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
    • Manual Choke
    • 4 Barrel Count
    • Square Bore
    • Smooth Secondary Transition
    • Both Timed and Full Vacuum Ports
    • Includes PCV Outlet
    See More

    Edelbrock – Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1407)

    Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet

    from

    $451.99
    The Edelbrock 1407 Performer Series 750 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristic

    Product Features:
    • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
    • Manual Choke
    • 4 Barrel Count
    • Square Bore
    • Smooth Secondary Transition
    • Both Timed and Full Vacuum Ports
    • Includes PCV Outlet
    See More

    Edelbrock – Performer 1400 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1400)

    Performer 1400 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet

    from

    $498.99
    The Edelbrock 1400 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist

    Product Features:
    • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
    • Electric Choke
    • 4 Barrel Count
    • Square Bore
    • Electric Choke Installed from Factory
    • Smooth Secondary Transition
    • Includes Only Timed Vacuum Port
    • Includes EGR ; Fuel Vapor Outlet
    See More

    Edelbrock – CARBURETOR (Part No.14064)

    CARBURETOR

    from

    $541.99
    Product Features:
    • EnduraShine Finish
    • GM/AMC-Style Throttle Linkage
    • Electric Choke Installed from Factory
    • Easy Tuning with 2-Piece Design
    • Smooth Secondary Transition
    • Both Timed and Full Vacuum Ports
    • Includes PCV Outlet
    See More

    Edelbrock – Performer 1412 Carburetor: 800 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1412)

    Performer 1412 Carburetor: 800 CFM, 4 Barrel, Square Bore, Manual Choke Inlet

    from

    $538.99
    The Edelbrock 1412 Performer Series 800 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1412 Performer Series 800 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation. Dyno tests proved that the EPS 800 carb outperformed a Holley #3310 carb out-of-the-box by 26 ft-lbs. of torque and 22 hp on a small-block Chevy engine equipped with an Edelbrock Performer RPM power package

    Product Features:
    • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
    • Manual Choke
    • 4 Barrel Count
    • Square Bore
    • Smooth Secondary Transition
    • Both Timed and Full Vacuum Ports
    • Includes PCV Outlet
    • Can Easily Calibrate with Rods and Jets
    See More

    Edelbrock – Reman Thunder AVS Carb #18129 800 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.18129)

    Reman Thunder AVS Carb #18129 800 CFM With Manual Choke, Satin Finish (Non-EGR)

    from

    $413.99
    Product Features:
    • Satin Finish
    • 4 Barrel
    • Aluminum Body Material
    • Manual Choke Type
    • 800 cfm Maximum Flow Rating
    See More

    Edelbrock – Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9907)

    Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR)

    from

    $407.99
    Product Features:
    • Satin Finish
    • 4 Barrel
    • Annular Booster Type
    • Manual Choke Type
    • 750 cfm Maximum Flow Rating
    See More

    In-Demand Performance Steering Products for 1978 Oldsmobile Custom Cruisers

    Select from 2 premium Performance Steering Products parts for your 1978 Oldsmobile Custom Cruiser, with prices ranging from $9.99 to $26.99.

    Energy Suspension – High Performance Sway Bar End Link Kit with Hardware (Part No.9.8117R)

    High Performance Sway Bar End Link Kit with Hardware

    from

    $26.99
    Made of high durometer, very firm, Hyper-Flex performance polyurethane. They’re economical, increase efficiency and are easy to install. Use Energy Suspension sway bar end links with sway bar bushings to get the maximum performance benefit. Combine both for the same effect as buying a larger sway bar. Together they offer a dramatic improvement in performance and handling.

    Product Features:
    • Made from HYPER-Flex Polyurethane
    • Allows Vehicle to Work At Maximum Efficiency
    • Easy to Install
    • Superior Performance and Greater Longevity
    • Lasts Much Longer Than OEM Rubber End Links
    See More

    Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

    Tie Rod Dust Boot

    from

    $9.99
    Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

    Product Features:
    • Easy to Install
    • Superior Material
    • Saves Your Tie Rods
    • Lasts Longer
    • Looks Great
    See More

    Most Sold 1978 Oldsmobile Custom Cruiser Performance Engines

    Explore our best-selling Oldsmobile parts for the 1978 Custom Cruiser among 18 OEM and aftermarket options starting from $25.99.

    B & M – Tork Master 3000 (Part No.20402)

    Tork Master 3000

    from

    $499.99
    Torque Converter – Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New allow steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required.

    Product Features:
    • New Precision Pump Drive Tube
    • Pressure Tested
    • Fully Balanced
    • Needle Thrust Bearing
    • New Thrust Washer
    • Washer Between Turbine and Cover
    See More

    B & M – Tork Master 2400 (Part No.20404)

    Tork Master 2400

    from

    $339.99
    Torque Converter – Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best value priced street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New alloy steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required. Due to torque converter core availability, the actual converter size may vary but performance functionality will be as advertised.

    Product Features:
    • New Precision Pump Drive Tube
    • Pressure Tested
    • Fully Balanced
    • Needle Thrust Bearing
    • New Thrust Washer
    See More

    Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

    High Performance 180 Degree Thermostat for Increased Flow

    from

    $26.99
    Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

    Product Features:
    • Opens At 180 Degrees
    • Designed to Resist Large Variations of Coolant Pressure at High RPM
    • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
    • For High Performance Street, Drag Race, and Oval Track
    • Copper & Brass Construction – Resists Corrosion
    • High Flow
    See More

    Edelbrock – Performer Small-Block Oldsmobile 350 EGR Intake Manifold (Part No.3711)

    Performer Small-Block Oldsmobile 350 EGR Intake Manifold

    from

    $463.99


    Product Features:
    • For Idle to 5500 RPM Street-Driven Performance
    • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
    • Patented Runner Design Ensures Broad Torque Curve
    • Excellent Throttle Response and Mid-Range Power
    • 50-State Street Legal if Correct Carburetor Used
    See More

    Edelbrock – Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 (Part No.5767)

    Sure Seat Valve Springs for Ford 429/460 V8 1969-1987

    from

    $111.99
    Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

    Product Features:
    • For Use With Cast Iron Heads
    • Springs Made of Highest Quality Spring Wire
    • Springs Precision Wound To Close Tolerances
    • Use with Original Equipment Heads Only
    See More

    Mr. Gasket – Water Neck (Part No.2557)

    Water Neck

    from

    $27.49
    Precision die cast, these water necks are first polished to a high luster, then chrome plated. Features an O-ring style seal to prevent water leaks. Comes with O-ring gasket and mounting bolts.

    Product Features:
    • Complete with o-rings and mounting bolts
    • Features an o-ring style seal to prevent water leaks
    • Chrome plated
    • 1/2″ NPT port can be used for various coolant temp related sensors or switches
    See More

    Spectre – Water Neck; Olds (Part No.4733)

    Water Neck; Olds

    from

    $26.99
    Spectre’s Oldsmobile V8 water neck fits Oldsmobile 330, 350, 425 and 455 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck has an additional by-pass hose connection and includes the bolts.

    Product Features:
    • Fits Oldsmobile 330, 350, 425 and 455 engines
    • Chrome plated
    • Bolts included
    • Designed for OEM fit
    • Easy to install
    • O-ring/gasket not included
    See More

    Mr. Gasket – Water Neck (Part No.9714)

    Water Neck

    from

    $35.49
    Precision die-cast for a great fit, these water necks are first polished to a high luster, then beautifully chrome plated for lasting beauty. Comes with gasket and mounting bolts.

    Product Features:
    • Prevents Water Leaks
    • Precision Die Cast
    See More

    Mr. Gasket – Intake Manifold Bolts (Part No.957G)

    Intake Manifold Bolts

    from

    $25.99
    These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes sixteen (16) 3/8 inch-16 x 1-1/4 inch bolts & washers

    Product Features:
    • Zinc plated Grade 5 steel
    • Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
    • Ideal For Minimal Space
    • 12-Point Head And Flange
    • Zinc Plated For Protection
    See More

    Mr. Gasket – Ultra Seal: Head Gasket (Part No.5788G)

    Ultra Seal: Head Gasket

    from

    $75.99
    Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.brbrGasket Bore 4.230 inch, Compressed thickness 0.038 inch

    Product Features:
    • Five layer (graphite core/perforated steel outer layers) composite construction
    • Graphite core has excellent thermo-conductivity-transfers heat away from hot spots in head preventing gasket burn-out
    • Provides excellent stability, compressibility and high temperature endurance
    • Coated with high temperature silicone to ensure sealing of engine fluids
    • Will not brinell (indent) aluminum cylinder heads
    • For high performance street, drag race and oval track use
    • Compatible w/High Octane Fuel
    • Compatible With Exotic Fuel
    See More

    B & M – Performance Torque Converter for GM TH400, 350, & 375 Transmissions (Part No.20400)

    Performance Torque Converter for GM TH400, 350, & 375 Transmissions

    from

    $299.99
    Torque Converter – Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost

    Product Features:
    • New Precision Pump Drive Tube
    • Pressure Tested
    • Fully Balanced
    • Needle Thrust Bearing
    • New Thrust Washer
    See More

    B & M – Holeshot 3600 (Part No.20425)

    Holeshot 3600

    from

    $825.99
    HoleShot 3600 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: HoleShot 3600 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.

    Product Features:
    • Furnace Brazed Impeller
    • Steel Alloy Pump Drive Tube
    • Heavy Duty Needle Bearing
    • Between Stator and Turbine
    • Furnace Brazed Turbine
    • Dual Pattern Drive Lugs
    • New Turbine Hub
    • New Springs/Rollers In Stator
    See More

    B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)

    Torque Converter, Nitrous Holeshot 3600

    from

    $665.99
    Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

    Product Features:
    • 3400-3800 RPM
    • Small And Big Blocks
    • Serious Performance
    • Furnace Brazed
    • Fully Balanced
    See More

    Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam (Part No.42-222-4)

    Xtreme Energy 218/224 Hydraulic Flat Cam

    from

    $548.99
    Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

    Product Features:
    • Excellent performance in street carbureted applications.
    • More vacuum allows an increase in duration for improved performance and assists power brakes.
    • Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
    • Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
    See More

    B & M – Holeshot 2400 (Part No.20412)

    Holeshot 2400

    from

    $499.99
    HoleShot 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) Application: HoleShot 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot c

    Product Features:
    • Furnace Brazed Impeller
    • Steel Alloy Pump Drive Tube
    • Heavy Duty Needle Bearing
    • Between Stator and Turbine
    • Furnace Brazed Turbine
    See More

    Competition Cams – Xtreme Energy 224/230 Hydraulic Flat Cam (Part No.42-223-4)

    Xtreme Energy 224/230 Hydraulic Flat Cam

    from

    $337.99
    Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

    Product Features:
    • Excellent performance in street carbureted applications.
    • More vacuum allows an increase in duration for improved performance and assists power brakes.
    • Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
    • Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
    See More

    Competition Cams – Thumpr 226/241 Hydraulic Flat Cam (Part No.42-600-5)

    Thumpr 226/241 Hydraulic Flat Cam

    from

    $324.99
    Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.

    Product Features:
    • Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
    • Best with aftermarket converters and more rear gear.
    • Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
    See More

    Edelbrock – Performer Series Retainer (Qty 16) (Part No.9724)

    Performer Series Retainer (Qty 16)

    from

    $100.99
    Product Features:
    • Use W/ Valve Springs Part #5822, 5882, 5896, 5872, 5867, 5812, 5857
    • Set of 16
    • 1.50 in. Outside Diameter
    • Steel Material
    • Black Oxide Finish
    See More

    Top-Rated Performance and Racing Products Brands For Your 1978 Oldsmobile Custom Cruiser

    Shop for the best-rated brands offering Performance and Racing Products and other products for your 1978 Oldsmobile Custom Cruisers. Below you’ll find some of our best rated Performance and Racing Products from MSD Ignition, Energy Suspension, and Mr. Gasket, and more. Performance and Racing Products from these brands that fit a 1978 Custom Cruiser start at just $9.99 and are rated as high as 4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

    Popular MSD Ignition 1978 Oldsmobile Custom Cruiser Performance and Racing Products

    When it comes to maintaining or upgrading your 1978 Oldsmobile Custom Cruiser, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. MSD Ignition ticks all of those boxes. We offer a wide selection of MSD Ignition Performance and Racing Products, specifically designed for the 1978 Oldsmobile Custom Cruiser. With over 5 MSD Ignition brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $13.29, with an average price of just $166.05. Plus, with over 50 customer reviews and an average rating of 4 stars, you can trust that our MSD Ignition Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

    Distributor; Oldsmobile V8; Ready-to-Run
    from
    $647.99
    This product is not rated

    Distributor; Oldsmobile V8; Ready-to-Run

    “”

    Rotor; GM HEI
    from
    $13.29
    This product is not rated

    Rotor; GM HEI

    “”

    Mod HEI Dust Cover, V8 & Odd Fire V6
    from
    $72.99
    This product is not rated

    Mod HEI Dust Cover, V8 & Odd Fire V6

    “”

    Popular Energy Suspension 1978 Oldsmobile Custom Cruiser Performance and Racing Products

    Energy Suspension auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1978 Oldsmobile Custom Cruiser owner should feel confident when installing genuine Energy Suspension parts in their vehicle. To ensure the best fit and performance for your 1978 Custom Cruiser, Advance Auto Parts carries a full inventory of 7 Energy Suspension Performance and Racing Products. Plus you will be keeping your Oldsmobile in peak condition while saving money because prices on these Energy Suspension Performance and Racing Products range from $9.99 to $57.99, plus, with more than 27 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

    Control Arm Bushing Set
    from
    $55.99
    This product is not rated

    Control Arm Bushing Set

    “”

    Coil Spring Isolator Set
    from
    $12.99
    This product is not rated

    Coil Spring Isolator Set

    “”

    Ball Joint Dust Boot Set
    from
    $10.99
    This product is not rated

    Ball Joint Dust Boot Set

    “”

    FAQs for 1978 Oldsmobile Custom Cruiser Performance and Racing Products

    Which Performance and Racing Products are best-sellers for 1978 Oldsmobile Custom Cruisers?

    Out of 105 Performance and Racing Products that fit 1978 Oldsmobile Custom Cruisers, the following parts are the top sellers:

    What’s the price range for 1978 Oldsmobile Custom Cruiser Performance and Racing Products?

    Performance and Racing Product prices for the 1978 Oldsmobile Custom Cruiser start at $9.99 and go up to $1,138.99 for the most premium parts.

    What’s the average price of a Performance and Racing Product for a 1978 Oldsmobile Custom Cruiser?

    The average price for Performance and Racing Products for the 1978 Oldsmobile Custom Cruiser is $307.46. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

    Does Advance Auto Parts sell Performance and Racing Products for other Oldsmobile Custom Cruiser model years?

    Yes, we currently carry Performance and Racing Products for 21 model years of Oldsmobile Custom Cruisers between 1971 and 1992. Performance and Racing Products are bought most frequently for the following model years: 1992, 1991, 1990, 1989, 1988, 1987, 1986, 1985, and 1984.

    What are the cheapest Performance and Racing Products for my 1978 Oldsmobile Custom Cruiser?

    The cheapest 1978 Oldsmobile Custom Cruiser Performance and Racing Products we carry in stock are:

    What are the top-rated Performance and Racing Products that fit the 1978 Oldsmobile Custom Cruiser?

    Out of 482 reviews by customers, our 1978 Oldsmobile Custom Cruiser Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1978 Oldsmobile Custom Cruiser and their top-rated products:

    Can I get help with 1978 Oldsmobile Custom Cruiser Performance and Racing Product orders?

    Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Oldsmobile Performance and Racing Products and more.

    What is your return policy for Oldsmobile Custom Cruiser Performance and Racing Products?

    Advance Auto Parts keeps returns simple. For new Oldsmobile Custom Cruiser Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.