1978 Mazda GLC Wheels and Tires

Essential 1978 Mazda GLC Wheels and Tires

National – Bearings (Part No.304)

Bearings

from

$24.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Koyo – Wheel Bearing (Part No.K8000323925KOY)

Wheel Bearing

from

$12.35
Koyo designs, manufacturers and supplies a wide range of hubs and bearings to the world’s leading automotive manufacturers.

Product Features:
  • No need for pre-load adjustment at assembly
  • Increased Load Rating
  • Increased bearing life
  • Equivalent to special re-melting steel GTS (Greater Toughness Steel Bearings)
  • Increased durability and matrix strength by controlling alloy element
See More

Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-30205)

Wheel Bearing: Direct Fit, 1 Piece

from

$13.29
WJB Automotive wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, WJB bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.

Product Features:
  • Depending on the application, specified WJB wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
  • Engineered, manufactured, and tested to meet or exceed OE specifications
  • Integrated seal design improves contamination resistance for a longer bearing life
  • High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
  • Manufactured from high quality steel to maximize durability under even the harshest driving conditions
  • Brand may vary by location
See More

Dorman – Wheel Lug Nut Lock Set: M12-1.50 Thread, Conical 60, Acorn, 1.39" Length, Purple, 20 Locks/1 Key (Part No.711-355J)

Wheel Lug Nut Lock Set: M12-1.50 Thread, Conical 60, Acorn, 1.39" Length, Purple, 20 Locks/1 Key

from

$44.99
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.

Product Features:
  • Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
  • Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
  • Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Wheel Lug Nut Lock: M12-1.50 Thread, Conical 60, Spline Drive Locking, 1.35" Length, Chrome, 4 Pack (Part No.711-315)

Wheel Lug Nut Lock: M12-1.50 Thread, Conical 60, Spline Drive Locking, 1.35" Length, Chrome, 4 Pack

from

$9.99
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.

Product Features:
  • Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
  • Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
  • Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Wheel Lug Nut & Lock Set: M12-1.50 Thread, Conical 60, Acorn, 1.39" L, Gunmetal, 16 Nuts/4 Locks/1 Key (Part No.711-335H)

Wheel Lug Nut & Lock Set: M12-1.50 Thread, Conical 60, Acorn, 1.39" L, Gunmetal, 16 Nuts/4 Locks/1 Key

from

$42.49
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.

Product Features:
  • Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
  • Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
  • Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Beck/Arnley – Rear Wheel Seal (Part No.052-2136)

Rear Wheel Seal

from

$7.29
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • High quality rubber designed to keep water and dirt out
  • Quality construction for fitment
  • Designed for under vehicle environment
  • Application specific for this vehicle
See More

National – Multi Purpose Seal (Part No.1126)

Multi Purpose Seal

from

$17.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Dorman – Wheel Bolt: M12-1.50 Thread Size, Conical – 60 deg Seat Style, 21 mm Hex Size, Silver (Sold by each) (Part No.610-274)

Wheel Bolt: M12-1.50 Thread Size, Conical - 60 deg Seat Style, 21 mm Hex Size, Silver (Sold by each)

from

$5.99
This replacement wheel lug bolt matches the original equipment hard wear dimensions for a reliable fit. Made of quality materials to ensure safe installation of the wheel under all conditions.

Product Features:
  • Ideal replacement – this wheel lug bolt is a direct replacement for the original hardware
  • Durable construction – made of quality materials for safe, reliable service
  • Cost-effective solution – offers original equipment quality at a competitive price
  • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
See More

Corteco – Wheel Seal (Part No.K801030275CFW)

Wheel Seal

from

$8.87
You can expect original quality and a first-to-market range from Freudenberg, the inventor and the world’s leading Original Equipment manufacturer of radial shaft seals. As the aftermarket distribution arm of Freudenberg Group – the designer and OEM manufacturer of the Simmerrings – Corteco draws on the material and manufacturing expertise of its parent company and is able to deliver products with outstanding OE quality, distinguished by the high durability of their sealing properties. A new generation of innovative seals that help to reduce friction and fuel consumption is also available.

Product Features:
  • Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
  • The flanged design allows for easier and proper installation and helps avoid cocking.
  • The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
  • Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.
See More

Driveworks – Oil Seal (Part No.S-1126)

Oil Seal

from

$8.79
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

National – Multi Purpose Seal (Part No.224210)

Multi Purpose Seal

from

$10.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Aftermarket – Wheel Brng. Retainer (Part No.K802534505AFT)

Wheel Brng. Retainer

from

$15.15
Wheel Brng. Retainer

Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece (Part No.33500)

Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece

from

$41.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:
  • MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
  • COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
  • FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
  • DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
  • COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 12 Piece (Part No.33500-12)

Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 12 Piece

from

$361.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:
  • MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
  • COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
  • FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
  • DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
  • COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Schrader – Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc (Part No.33700)

Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc

from

$51.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:
  • MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
  • COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
  • FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
  • DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
  • COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
  • ADJUSTABLE: 0-40 degree adjustable stem fits into more aftermarket rim sets
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 4 Piece (Part No.33500-4)

Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 4 Piece

from

$129.99
Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com For more information about Schrader and its products visit: www.SchraderTPMS.com

Product Features:
  • Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
  • Sensor must be programmed to specifi Y/M/M vehicle
  • Compatible with most programming tools
  • Make sure that your TPMS programming tool is updated to it’s latest version
  • Combines 314.9, 315 & 433 MHz application into one sensor
  • Future proofed to support new and pending OE system technologies
  • Optimizes inventory levels and returns
  • Reduces overal cost and increases speed of service
  • Use service kit 20018 to replace the rubber valve assembly
  • Valve Core Torque = 3.5 in-lbs (0.4 Nm)
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Driveworks – Ball Bearing (Part No.S-205-FF)

Ball Bearing

from

$6.49
Product Features:
  • Brand may vary by location
See More

Driveworks – Tapered Cone/Cup Wheel Bearing Set (Part No.S-A-4)

Tapered Cone/Cup Wheel Bearing Set

from

$8.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Driveworks – Bearing (Part No.S-L-44649)

Bearing

from

$4.99
Product Features:
  • Brand may vary by location
See More

Driveworks – Wheel Bearing (Part No.S-RW-102-R)

Wheel Bearing

from

$13.29
Product Features:
  • Brand may vary by location
See More

1978 Mazda GLC Wheels and Tires

You count on your 1978 Mazda GLC to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Wheels and Tires. With 16 Wheels and Tires ranging in price from $4.31 to $361.99, you’re sure to find everything you need for your 1978 Mazda GLC.

Brands matter. If you want to shop a specific Wheels and Tires brand, we stock 8 different brands like Schrader, DriveWorks, and National. 1978 Mazda GLC Wheels and Tires start as low as $4.31!

One of the best ways to find top quality OEM or aftermarket Wheels and Tires is by asking professionals. Short of that, you can shop with confidence thanks to our 71 extensive product reviews on 1978 Mazda GLC Wheels and Tires. Some of the top-rated Wheels and Tires products we carry are Bearings with 1.0 stars.

Did we mention you can order your Wheels and Tires from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Wheels and Tires inventory for your 1978 Mazda GLC below to get started!

Top-Rated Wheels and Tires Brands For Your 1978 Mazda GLC

Trusted Wheels and Tires OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1978 Mazda GLC running right for years to come. In our inventory you’ll find brands like Schrader, DriveWorks, National, and even more.

Popular Schrader Wheels and Tires

You’ll find popular Schrader brand products across TPMS Sensors. All are waiting to get your 1978 Mazda GLC back on the road. Some of the top-rated Schrader products in these categories are:

FAQs for 1978 Mazda GLC Wheels and Tires

What are the most purchased Wheels and Tires for the 1978 Mazda GLC?

Out of 16 Wheels and Tires for the 1978 Mazda GLC, the most popular in our inventory are:
Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc
from $51.99
This product is not rated
Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc
Tire Pressure Sensors
Wheel Bearing: Direct Fit, 1 Piece
from $13.29
(1)
Wheel Bearing: Direct Fit, 1 Piece
Front Wheel Bearings
Multi Purpose Seal
from $17.79
This product is not rated
Multi Purpose Seal
Rear Wheel Seals

What are the top-rated 1978 Mazda GLC Wheels and Tires?

Top-rated Wheels and Tires for your 1978 Mazda GLC based on customer reviews/ratings are:
Bearings
from $24.99
(1)
Bearings
“Add specified rear wheel bearings, but front wheel bearing were sent. Now I’m stuck with a pair of front wheel bearing that I had to pay packing and s”