1978 Dodge Charger Catalytic Converters

Essential 1978 Dodge Charger Catalytic Converters

MagnaFlow – OEM Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.51209)

OEM Grade Federal / EPA Compliant Universal Catalytic Converter

from

$194.99
MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51209 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.52478)

OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter

from

$654.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52478. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2015-2020 Dodge Challenger and 2015-2020 Dodge Charger, this direct-fit catalytic converter also interchanges with OE parts 6828 1724AA and 5181 970AB. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Walker – CalCat Catalytic Converter- CARB Certified, Direct Replacement, No Fabrication Needed (Part No.82685)

CalCat Catalytic Converter- CARB Certified, Direct Replacement, No Fabrication Needed

from

$1303.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Direct-Fit Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles and delivers a precise OE-style fit.

Product Features:
  • CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
  • DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication or welding
  • SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
  • CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
  • STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and stainless-steel body with aluminized pipe and heat shields for durability
See More

MagnaFlow – California Grade CARB Compliant Direct-Fit Catalytic Converter (Part No.5561101)

California Grade CARB Compliant Direct-Fit Catalytic Converter

from

$1554.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5561101. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2011-2014 Dodge Charger, 2011-2014 Chrysler 300, and additional vehicles. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.49241)

OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter

from

$507.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49241. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2005-2010 Chrysler 300, 2006-2010 Dodge Charger, and more, this direct-fit catalytic converter also interchanges with OE parts 4578 356AA and 4581 744AD, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.21-539)

OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter

from

$622.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 21-539. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2005-2010 Chrysler 300, 2007-2010 Dodge Charger, and more, this direct-fit catalytic converter also interchanges with OE parts 4581 752AD and 4578 358AA, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – OEM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.22-141)

OEM Grade Federal / EPA Compliant Manifold Catalytic Converter

from

$771.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 22-141. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2011-2020 Dodge Charger, 2011-2020 Chrysler 300, and more, this direct-fit catalytic converter also interchanges with OE parts 6803 8392AG and 6809 1590AE, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.26201)

HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter

from

$479.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 26201. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2005-2010 Chrysler 300, 2006-2010 Dodge Charger, and more, this direct-fit catalytic converter also interchanges with OE parts 4578 357AA and 4578 441AB, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Walker – Catalytic Converter- EPA Ultra, Direct Replacement, No Fabrication Needed (Part No.54605)

Catalytic Converter- EPA Ultra, Direct Replacement, No Fabrication Needed

from

$624.99
Designed to comply with EPA standards while delivering premium performance with assured compliance, Walker® Ultra® Direct-Fit Catalytic Converters provide premium performance and are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:
  • EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
  • DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and/or welding
  • KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
  • STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and durability
  • OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
  • BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.
See More

MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.94024)

Standard Grade Federal / EPA Compliant Universal Catalytic Converter

from

$130.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94024 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.26202)

HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter

from

$483.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 26202. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2005-2010 Chrysler 300, 2006-2010 Dodge Charger, and more, this direct-fit catalytic converter also interchanges with OE parts 4578 356AA and 4581 744AD, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Walker – Catalytic Converter- EPA Ultra, Direct Replacement, No Fabrication Needed (Part No.55433)

Catalytic Converter- EPA Ultra, Direct Replacement, No Fabrication Needed

from

$519.99
Designed to comply with EPA standards while delivering premium performance with assured compliance, Walker Ultra Direct-Fit Catalytic Converters provide premium performance and are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:
  • EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO or NY. Legal inME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
  • DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and/or welding
  • KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
  • STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and durability
  • OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
See More

MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.94004)

Standard Grade Federal / EPA Compliant Universal Catalytic Converter

from

$119.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94004 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – OEM Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.51356)

OEM Grade Federal / EPA Compliant Universal Catalytic Converter

from

$202.99
MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51356 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – California Grade CARB Compliant Direct-Fit Catalytic Converter (Part No.5561584)

California Grade CARB Compliant Direct-Fit Catalytic Converter

from

$2109.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5561584. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2007-2018 Dodge Charger, 2006-2019 Chrysler 300, and additional vehicles. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Walker – CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed (Part No.82617)

CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed

from

$723.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker® CalCat® Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.

Product Features:
  • CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
  • SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
  • CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
  • DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
  • FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
  • BUY WITH CONFIDENCE — Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity warranty
See More

MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.91005)

Standard Grade Federal / EPA Compliant Universal Catalytic Converter

from

$143.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 91005 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.49243)

OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter

from

$606.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49243. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2006-2019 Dodge Charger, 2005-2019 Chrysler 300, and more, this direct-fit catalytic converter also interchanges with OE parts 4578 447AD and 4578 449AC, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – California Grade CARB Compliant Direct-Fit Catalytic Converter (Part No.5561140)

California Grade CARB Compliant Direct-Fit Catalytic Converter

from

$1505.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5561140. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2007 Chrysler 300, 2007 Dodge Charger, and additional vehicles. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.26205)

HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter

from

$566.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 26205. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2006-2019 Dodge Charger, 2005-2019 Chrysler 300, and more, this direct-fit catalytic converter also interchanges with OE parts 4578 446AD and 6803 9466AA, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.21-540)

OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter

from

$568.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 21-540. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2005-2010 Chrysler 300, 2007-2010 Dodge Charger, and more, this direct-fit catalytic converter also interchanges with OE parts 4581 753AE and 4578 359AA, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – California Grade CARB Compliant Direct-Fit Catalytic Converter (Part No.4561241)

California Grade CARB Compliant Direct-Fit Catalytic Converter

from

$1074.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 4561241. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2005-2006 Chrysler 300, 2005-2006 Dodge Magnum, and more, this direct-fit catalytic converter also interchanges with OE parts 4578 356AA and 4581 744AD, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – California Grade CARB Compliant Direct-Fit Catalytic Converter (Part No.5561243)

California Grade CARB Compliant Direct-Fit Catalytic Converter

from

$2101.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5561243. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2006-2019 Dodge Charger, 2009-2019 Dodge Challenger, and additional vehicles. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.94014)

Standard Grade Federal / EPA Compliant Universal Catalytic Converter

from

$126.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94014 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.26204)

HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter

from

$577.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 26204. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2006-2019 Dodge Charger, 2005-2019 Chrysler 300, and more, this direct-fit catalytic converter also interchanges with OE parts 4578 447AD and 4578 449AC, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – California Grade CARB Compliant Universal Catalytic Converter (Part No.456055)

California Grade CARB Compliant Universal Catalytic Converter

from

$853.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 456055. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Walker – CalCat Catalytic Converter- CARB Certified, Direct Replacement, No Fabrication Needed (Part No.82884)

CalCat Catalytic Converter- CARB Certified, Direct Replacement, No Fabrication Needed

from

$1021.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Direct-Fit Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles and delivers a precise OE-style fit.

Product Features:
  • CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
  • DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication or welding
  • SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
  • CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
  • STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and stainless-steel body with aluminized pipe and heat shields for durability
See More

MagnaFlow – California Grade CARB Compliant Direct-Fit Catalytic Converter (Part No.5461241)

California Grade CARB Compliant Direct-Fit Catalytic Converter

from

$1045.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5461241. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2006 Chrysler 300, 2006 Dodge Charger, and additional vehicles. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

1978 Dodge Charger Catalytic Converters

Maybe you’re in the middle of a full rebuild of that 1978 Dodge Charger. Maybe you just need a couple of Catalytic Converters. Either way, Advance Auto Parts has 6 different Catalytic Converters in our inventory ranging from $102.99 to $516.99. That means you can find the exact parts or products you need to keep that 1978 Dodge Charger running smoothly.

Catalytic Converters are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 1978 Dodge Charger. Walker and Magnaflow are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Catalytic Converters for your 1978 Dodge Charger, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Catalytic Converters to keep your 1978 Dodge Charger rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Catalytic Converters Brands To Make Your 1978 Dodge Charger Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1978 Dodge Charger demands trusted brand parts and products to keep it running. Many trusted brands of Catalytic Converters make up Advance Auto Parts’ inventory, and all are ready to help make your Charger the best it can be. Be sure to browse some of our top Catalytic Converters brands and parts.

FAQs for 1978 Dodge Charger Catalytic Converters

What are the most purchased Catalytic Converters for the 1978 Dodge Charger?

Out of 6 Catalytic Converters for the 1978 Dodge Charger, the most popular in our inventory are:
CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed
from $465.99
This product is not rated
CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed
Catalytic Converters
CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed
from $516.99
This product is not rated
CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed
Catalytic Converters
Standard Grade Federal / EPA Compliant Universal Catalytic Converter
from $169.99
This product is not rated
Standard Grade Federal / EPA Compliant Universal Catalytic Converter
Catalytic Converters