1978 Dodge B100 Drivetrains
More 1978 Dodge B100 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1978 Dodge B100, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1978 Dodge B100 Drivetrains
Yukon Gear – 1350 Lifetime Series U/Joint (Part No.42021)
from
$63.99
Yukon 1350 Lifetime Series U/Joint. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring.
See More
Yukon Gear – 7260 U/Joint Strap, Small Chrysler With Bolts, 7.25, 8.25, 8.75, 9.25 (Part No.41192)
from
$49.99
7260 U/joint strap, Small Chrysler w/ bolts, 7.25, 8.25, 8.75, 9.25.
Product Features:
See More
Product Features:
- u-joint strap kit
- Fits Chrysler 7.25″, 8.25″ 8.75″ and 9.25″ rear
- 7260 u-joint size
- Includes two straps and four bolts
Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80 (Part No.55011)
Yukon Gear – 1350 & 1410 U/Joint U-Bolts, 3/8" X 1-11/16", Kit (Part No.41190)
from
$16.99
1350 & 1410 U/joint U-bolts, 3/8″ X 1-11/16″, kit.
Product Features:
See More
Product Features:
- u-joint u-bolt kit
- Fits 1350 and 1410 u-joint size
- Includes two u-bolts and four nuts
Yukon Gear – Hardcore Diff Cover For Dana 50, Dana 60 & Dana 70 (Part No.32352)
from
$288.99
Product Features:
See More
- Nodular iron for added strength
- Thick design
- Durable powder coat finish
- Magnetic drain plug
- Made in USA
- High strength stainless steel fasteners
Motive Gear – Differential Carrier (Part No.C9.25E)
Yukon Gear – Standard Open Notched Cross Pin Shaft For 9.25" Chrysler (Part No.33309)
from
$84.99
Standard Open notched cross pin shaft for 9.25″ Chrysler.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits Chrysler 9.25″
- Standard open carrier only
- Notched
Yukon Gear – Dana 60 & Dana 70 Power Lok Cross Pin Shaft (Two Needed) (Part No.33315)
from
$156.99
Dana 60 & Dana 70 Power Lok cross pin shaft (TWO needed).
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits Dana Spicer 60 and 70
- Powr Lok positraction only
Yukon Gear – Zip Locker Soleniod Valve (Part No.34014)
Yukon Gear – Replacement Yoke For Dana 60 And 70 With 1410 U/Joint Size (Part No.41031)
from
$334.99
Yukon replacement yoke for Dana 60 and 70 with 1410 U/joint size. 4.188″ snap ring span, 1.188″ cap diameter. Outside snap ring.This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60, 70, 70U and 70HD
- 29 spline
- 1410 u-joint size
- 4.188″ snap ring span
- 1.188″ cap diameter
- Outside snap ring design
- U-bolt style
Yukon Gear – Replacement Yoke For Dana 44-HD, 60, And 70 With A 1310 U/Joint Size (Part No.41022)
from
$233.99
Yukon replacement yoke for Dana 44-HD, 60, and 70 with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 and 70
- 29 spline
- 1310 u-joint size
- Outside snap ring design
- 3.219″ snap ring span
- 1.062″ cap diameter
- Strap style
National – Shaft Repair Sleeve (Part No.99168)
from
$36.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – Six Piece Side Gear And Thrust Washer Kit For Chrysler 8" And 9.25" (Part No.33278)
from
$98.99
Six piece side gear thrust washer kit for Chrysler 8″ and 9.25″.
Product Features:
See More
Product Features:
- Side gear thrust washer kit
- Fits Chrysler 8″ and 9.25″
Yukon Gear – 9.25" Chrysler C/Clip (Part No.33075)
from
$17.99
9.25″ Chrysler C/clip, 0.205″ wide for 4137429 axle.
Product Features:
See More
Product Features:
- c-clip for Chrysler 9.25″ rear
- 0.205″ thick
Dorman – Spindle Washer – I.D. 19.1mm O.D. 41.6mm Thickness 2.6mm (sold by each) (Part No.618-061)
from
$14.29
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
National – Bearings (Part No.JLM704610)
from
$16.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.M86649)
from
$18.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Master Overhaul Kit For Chrysler ’70-’75 8.25" Differential (Part No.14004)
from
$278.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.
Product Features:
See More
Product Features:
- Fits 1975 and down Chrysler 8.25″
- Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush, and gasket.
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
Yukon Gear – Full-Floating, Blank 35 Spline Diameter, Non-Drilled Axle Shaft For Dana 60 (Part No.21005)
from
$232.99
Full-floating, 35 spline diameter, non-drilled blank axle shaft for Dana 60. 40″ inches long. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H axles come with a one year warranty against manufacturing defects.
See More
Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)
from
$7.99
Dana 60 & Dana 70 Power Lok case bolt.
Product Features:
See More
Product Features:
- Power Lok case bolt for Dana Spicer 60 and 70
- 7/16 x 14 thread
- 3.5″ long
- 9/16″ hex head
Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)
from
$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
Yukon Gear – Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70 (Part No.23007)
Yukon Gear – Dura Grip For Chrysler 9.25" Rear (Part No.26019)
from
$829.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.
Product Features:
See More
Product Features:
- Fits Chrysler 9.25″ rear
- 4-spring, clutch style positraction
- Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
- Fully rebuildable
- Assembled in the USA
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)
from
$22.79
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2018
- Weight approx: 3 Lbs
- BEARING ID / BORE: 1.3780 INCH / 35 MM
- CENTERLINE: 2.28 INCH / 58 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- STYLE: ROUND FRAME
- COMPLETE MOUNT
Motive Gear – Differential Gear Install Kit (Part No.C8.25IK)
Driveworks – Tapered Roller Bearing (Part No.S-M-802011)
Popular 1978 Dodge B100 Drivetrains Categories
1978 Dodge B100 Drivetrains
You count on your 1978 Dodge B100 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 395 Drivetrains ranging in price from $2.29 to $1,487.99, you’re sure to find everything you need for your 1978 Dodge B100.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 15 different brands like National, Felpro, and Yukon Gear. 1978 Dodge B100 Drivetrains start as low as $2.29!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 1,146 extensive product reviews on 1978 Dodge B100 Drivetrains. Some of the top-rated Drivetrains products we carry are Differential Plug, Rubber, Chrysler 2008-2000 with 4.8 stars and Differential Carrier Gear Kit with 3.7 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1978 Dodge B100 below to get started!
Top-Rated Drivetrains Brands For Your 1978 Dodge B100
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1978 Dodge B100 running right for years to come. In our inventory you’ll find brands like National, Felpro, Yukon Gear, and even more.
Popular Dorman Drivetrains
You’ll find popular Dorman brand products across Spindles. All are waiting to get your 1978 Dodge B100 back on the road. Some of the top-rated Dorman products in these categories are:
from
$4.99
(3)
Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm
Spindle Retainers
Top-Rated National Drivetrains
If National are what you’re looking for, our inventory holds plenty. We stock National brand Drivetrains for your 1978 Dodge B100, and some of our most reviewed National parts include:
FAQs for 1978 Dodge B100 Drivetrains
What are the most purchased Drivetrains for the 1978 Dodge B100?
Out of 395 Drivetrains for the 1978 Dodge B100, the most popular in our inventory are:
What are the top-rated 1978 Dodge B100 Drivetrains?
Top-rated Drivetrains for your 1978 Dodge B100 based on customer reviews/ratings are:
from
$5.99
(11)
Differential Plug, Rubber, Chrysler 2008-2000
“I used this Rubber plug to fill a pre-drilled hole in a air intake tube that I customized for a particular application in my car, and it works beautif”
