1978 Dodge Aspen Steering and Chassis Parts
More 1978 Dodge Aspen Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1978 Dodge Aspen, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1978 Dodge Aspen Steering and Chassis Parts
Lares – Remanufactured Power Steering Gear Box (Part No.1031)
from
$625.99
Power Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More
Powercraft – Steering Gear Major Seal Kit (Part No.8513)
from
$65.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Rare Parts – Tie Rod Sleeve (Part No.RP25563)
from
$56.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with clamps
- Used to set Toe in or out
- replaces rusted or corroded sleeves
- Used to connect inner and outer tie rod ends
National – Bearings (Part No.A-2)
from
$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Lares – Remanufactured Power Steering Pump (Part No.2140)
from
$136.99
Power Steering Pumps are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More
Driveworks – Taper Bearing Set (Part No.S-A-2)
from
$8.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Carquest Premium – Pressure Hose Assembly (Part No.35636)
from
$27.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Carquest Premium – Bulk – 3/8" I.D. Return Hose (J189) (sold by foot) (Part No.35001)
from
$7.79
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)
MOOG – Suspension Stabilizer Bar Link Kit (Part No.K7087)
from
$13.29
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Incorporates proven design and engineering features
Carquest Premium – Bulk – 3/8" I.D. Return Hose J189 (Part No.36196)
from
$39.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
National – Multi Purpose Seal (Part No.6859S)
from
$12.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
MOOG – Idler Arm (Part No.K7086)
from
$84.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Heavy-duty design
- Loose or worn chassis parts can lead to premature tire wear
- Engineered steel composition results in a stronger component
- Powdered metal gusher bearing design enables grease to flow through bearing to
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Powercraft – Pump Drive Shaft Seal Kit (Part No.8709)
from
$13.29
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
MOOG – Ball Joint (Part No.K772)
from
$40.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Cardone – Power Steering Filter (Part No.20-0038F)
from
$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Rare Parts – Pitman Arm (Part No.RP20401)
from
$79.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering response
- Reduces wander
- Reduces vibration
- Restores OE alignment
Powercraft – Steering Gear Control Valve Seal Kit (Part No.8518)
from
$16.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)
from
$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.
Product Features:
See More
Product Features:
- Transmission cooler reinstallation kit
- Contains part numbers 248001, 226201, 240250 and 4 hose clamps
- Provides all hardware for reinstallation of Imperial transmission coolers
- Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Powercraft – Steering Gear Input Shaft Seal Kit (Part No.8553)
from
$51.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Rare Parts – Torsion Bar Bushing (Part No.RP15653)
from
$177.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Torsional rubber bushings
- UV resistant
- No Squeak
Powercraft – Steering Gear Complete Rebuild Kit (Part No.8538)
from
$157.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Driveworks – TIE ROD END 1 EA DRIVE (Part No.DW-ES401L)
from
$8.49
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Forged housing from specific materials provides strength and durability to prevent breakage
- Coated technology provides a smooth and durable surface to prevent corrosion and rust
- Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
- A slotted nut and cotter pin for a more secure installation
National – Multi Purpose Seal (Part No.7013S)
from
$20.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Energy Suspension – Sway Bar Bushing Set (Part No.5.5110G)
from
$42.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Powercraft – Pump Seal Kit (Part No.7918)
from
$36.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Pump Seal Kit (Part No.8507)
from
$22.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Steering Gear Complete Pitman Shaft Seal Kit (Part No.8765)
from
$54.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Steering Gear Lower Pitman Shaft Seal Kit (Part No.8516)
from
$27.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Popular 1978 Dodge Aspen Steering and Chassis Parts Categories
1978 Dodge Aspen Steering and Chassis Parts
You count on your 1978 Dodge Aspen to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 66 Steering and Chassis Parts ranging in price from $2.99 to $625.99, you’re sure to find everything you need for your 1978 Dodge Aspen.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 12 different brands like Imperial, Carquest Premium, and Driveworks. 1978 Dodge Aspen Steering and Chassis Parts start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 2,506 extensive product reviews on 1978 Dodge Aspen Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Bearings with 4.7 stars and Bulk – 3/8" I.D. Return Hose J189 with 4.6 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1978 Dodge Aspen below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1978 Dodge Aspen
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1978 Dodge Aspen running right for years to come. In our inventory you’ll find brands like Imperial, Carquest Premium, Driveworks, and even more.
Popular Driveworks Steering and Chassis Parts
You’ll find popular Driveworks brand products across Idler Arms and Steering Shafts. All are waiting to get your 1978 Dodge Aspen back on the road. Some of the top-rated Driveworks products in these categories are:
Top-Rated Imperial Steering and Chassis Parts
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 1978 Dodge Aspen, and some of our most reviewed Imperial parts include:
FAQs for 1978 Dodge Aspen Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1978 Dodge Aspen?
Out of 66 Steering and Chassis Parts for the 1978 Dodge Aspen, the most popular in our inventory are:
from
$7.79
This product is not rated
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)
Power Steering Reservoir Hoses
from
$2.99
This product is not rated
Bulk – 3/8" ID Return Hose (CPE) (sold by each)
Power Steering Return Hoses
What are the top-rated 1978 Dodge Aspen Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 1978 Dodge Aspen based on customer reviews/ratings are:
from
$62.99
(14)
Pump Complete Rebuild Kit
“No complaints had all seals and o rings needed for the rebuild”
