1978 Chevrolet P30 Performance Fuel Systems
More 1978 Chevrolet P30 Performance Fuel Systems
Find your specific 1978 Chevrolet P30 original or aftermarket Performance Fuel Systems below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1978 Chevrolet P30 Performance Fuel Systems
Holley – Off Road Carbs (Part No.0-90670)
from
$724.99
The off-road truck avenger is designed specifically for off-road applications. The unique fuel metering block eliminates fuel spillover through the boosters at extreme angles allowing for 40 degree climbing, 30 degree side hill maneuvers and nose-down descents to avoid hesitations, stalling and flooding typically associated with carbs in an off road environment. The 470 CFM off-road truck avenger is the perfect carburetor for 4 cylinder, V-6, and inline 6 cylinder engines. Viton(R) is a registered trademark of DuPont Performance Elastomers.
Product Features:
See More
Product Features:
- Gold Dichromate Finish For Extreme Off Road Environments
- Single Feed Fuel Inlet For Ease Of Installation
- Optimized Off-Road Calibration That Works Out-Of-The-Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- One Piece Off-Road Vent Tube Eliminates Fuel Spillover
- Metering Block For Flood Free Op. 40 deg. Climb/30 deg. Side Hill
- Limited Lifetime Warranty Defects In Material/Workmanship
Holley – Prem Street Carbs (Avengers) (Part No.0-80570)
from
$626.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet-Flow Tested To Assure It Arrives Ready To Run
- Street Ready; Out Of The Box
Holley – Street Carburetor: 650 CFM, Electric Choke, 4 Barrel, Spreadbore Bore, Single Inlet, Gold Dichromate (Part No.0-9895)
from
$805.99
Holley Replacement Carburetors are Engineering to Improve Performance and Keep You Emission Legal. The 0-80452 is a Model 4160(TM) Square Bore designed to fit several applications.
Product Features:
See More
Product Features:
- Gold Dichromate Finish For Corrosion Resistance w/Classic Look
- Improves Performance Over Stock Carburetor
- All Emissions Provisions
- Factory Preset Electric Choke For Easy Startups
- For All Weights/Gearing/Trans For Smooth Open Of Secondaries
- Single Feed Fuel Inlet With Filter For Easy Installation
- Power Valve Blow-Out Protection
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)
from
$620.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Edelbrock – Performer RPM Series fuel pump for SBC and W Series Chevy (Part No.1721)
from
$168.99Product Features:
- Unique Valve Design
- Improves Flow Quantity/Quality
- Supports Engines Up To 550 HP
- Hi-Vol 0.375 in. NPT Inlet/Outlet
- Produces 6 psi
- Gasoline Or Mixed Fuels Only
Holley – Mechanical Fuel Pump (Part No.12-835)
from
$124.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.
Product Features:
See More
Product Features:
- Street Performance
- Flows 80 gph Free Flow
- Shutoff Pressure Pre-Set 7.5 PSI
- Fuel Pressure Regulator Is Not Required
- Heavy Duty Construction For Continuous High rpm Operation
- Fuel Body Casting Can Be Rotated For Plumbing Situations
- Inlet And Outlet Tapped For 1/4 in. NPT
Edelbrock – Performer RPM Series fuel pump is for Big-Block Chevrolet (Part No.1722)
from
$181.99Product Features:
- Unique Valve Design
- Improves Flow Quantity/Quality
- Supports Engines Up To 550 HP
- Hi-Vol 0.375 in. NPT Inlet/Outlet
- Produces 6 psi
- Gasoline Or Mixed Fuels Only
Holley – Keith Dorton Series; VoluMax Race Series Fuel Pump (Part No.12-327-20)
from
$206.99
Keith Dorton Series VoluMax race series fuel pump made from heavy duty construction for continuous high RPM operation. Redesigned high flow valves always ensure adequate fuel delivery. Fuel pressure regulator is required. Fuel body casting can be rotated
Product Features:
See More
Product Features:
- High Output Fuel Flow
- Flows 170 gph Free Flow
- Shutoff Pressure Pre-Set At 8 PSI
- Fuel Pressure Regulator Required Recommend P/N 12-704
- Heavy Duty Construction For Continuous High rpm Operation
- Redesigned High Flow Valves Ensure Adequate Fuel Delivery
- Fuel Body Casting Can Be Rotated For Plumbing Situations
- 3/4in.-16 Inlet And Outlet Ports
Holley – High Output Mechanical Fuel Pump – 110 GPH Free Flow (Part No.12-327-11)
from
$144.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.
Product Features:
See More
Product Features:
- High Output Fuel Flow
- Flows 110 gph Free Flow
- Shutoff Pressure Pre-Set From 6.5 To 8 PSI
- Fuel Pressure Regulator Is Not Required
- Heavy Duty Construction For Continuous High rpm Operation
- Fuel Body Casting Can Be Rotated For Plumbing Situations
- Inlet And Outlet Tapped For 3/8 in. NPT
- Inlet/Outlet Tapped For 3/8 in. NPT
Holley – Mechanical Fuel Pump (Part No.12-327-13)
from
$165.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.
Product Features:
See More
Product Features:
- High Output Fuel Flow
- Flows 130 gph Free Flow
- Shutoff Pressure Pre-Set From 7.5 To 9 PSI
- Fuel Pressure Regulator Required Recommend P/N 12-704
- Heavy Duty Construction For Continuous High rpm Operation
- Redesigned High Flow Valves Ensure Adequate Fuel Delivery
- Fuel Body Casting Can Be Rotated For Plumbing Situations
- Inlet And Outlet Tapped For 3/8 in. NPT
Popular 1978 Chevrolet P30 Performance Fuel Systems Categories
1978 Chevrolet P30 Performance Fuel Systems
Maybe you’re in the middle of a full rebuild of that 1978 Chevrolet P30. Maybe you just need a couple of Performance Fuel Systems. Either way, Advance Auto Parts has 10 different Performance Fuel Systems in our inventory ranging from $124.99 to $805.99. That means you can find the exact parts or products you need to keep that 1978 Chevrolet P30 running smoothly.
Performance Fuel Systems are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 1978 Chevrolet P30. Holley and Edelbrock are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Performance Fuel Systems for your 1978 Chevrolet P30, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Performance Fuel Systems to keep your 1978 Chevrolet P30 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Performance Fuel Systems Brands To Make Your 1978 Chevrolet P30 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1978 Chevrolet P30 demands trusted brand parts and products to keep it running. Many trusted brands of Performance Fuel Systems make up Advance Auto Parts’ inventory, and all are ready to help make your P30 the best it can be. Be sure to browse some of our top Performance Fuel Systems brands and parts.
Popular Holley Performance Fuel Systems
We carry Holley parts in our stock across Performance Fuel Pumps and Performance Carburetors categories, plus more. For a 1978 Chevrolet P30, our most popular Holley Performance Fuel Systems include:
from
$620.99
(6)
Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny
Performance Carburetors
FAQs for 1978 Chevrolet P30 Performance Fuel Systems
What are the most purchased Performance Fuel Systems for the 1978 Chevrolet P30?
Out of 10 Performance Fuel Systems for the 1978 Chevrolet P30, the most popular in our inventory are:
