1978 Chevrolet K20 Body Parts
Find Your Specific 1978 Chevrolet K20 Body Parts
Below you will find various in-demand Chevrolet Body Parts, components and accessories for your 1978 K20. Advance Auto Parts has popular K20 parts like Vehicle Windows, Vehicle Doors, Vehicle Hoods and more. You’ll also find aftermarket and OEM Body Parts for other K20 model years including
1977,
1979,
1980,
1981,
1982,
1983,
1984,
1985,
1986 and more. Select a category of 1978 Chevrolet K20 Body Parts below and start saving instantly.
Popular 1978 Chevrolet K20 Body Parts Categories
Essential Body Parts for 1978 Chevrolet K20s
Extang – Trifecta (TM) 2.0 tri-fold Tonneau Cover, Black vinyl, 75-87 C10 Series 8 Ft Bed (Part No.92535)
from
$574.99
Extangs Trifecta Tri Fold Tonneau has an easy to use folding design, smooth sleek looks and unmatched durability. This user friendly soft tonneau requires no assembly, no drilling, and installation is as easy as positioning the cover on your truck, tightening the clamps and you’re ready to go. The Hold Tite Straps And Snaps, WeatherTuff Seals, and MaxHinges are all Extang Engineered in order to ensure the best in security and safety.
Product Features:
See More
Product Features:
- Non Lockable
- Heavy Duty Vinyl Helps To Keep Your Cargo Protected From Whatever Weather You Drive Through
- Heavy Duty Luggage Style Hold Tite Fasteners Secure The Tonneau In The Open Position At The Cab, Provides Quick And Easy Storage When Hauling Large Cargo
- Features A Rich Looking All Black Frame, It Has A Perfectly Sewn And Tight Fitting, Double Layered Vinyl With Anti Curl Corners
- Ultra Strong, Rugged, Double Pivot Design. Max Hinges Are Made Of Durable Glass Filled Nylon And Feature Protective Padding
- Rear Tail Section Clamps Operate With Spring Action Handle For Instant Fasten And Release, Clamp Conveniently Stows Away Inside Rail When Not In Use
- Easy To Use Folding Design With Smooth Sleek Looks
- Limited Lifetime Warranty
Dee Zee – With Step Pads, 3" Round Bent/ 64" L, Powder Coated, Black, Steel (Part No.DZ3700291)
from
$424.99
Dee Zee Nerf Steps A tubular side step for your vehicle. Constructed of black powder coated steel. 3 Inch round design. Molded plastic step pads provide non skid stepping areas. Hidden but sturdy bracing and hardware is coated to help prevent rust and keep your tubes strong.
Product Features:
See More
Product Features:
- Mounting Kit Included
- Frame Body Mount Bolts
- Drilling Required
- 2 Pads On The Bar
- Molded Plastic Step Pads Ensure Secure Footing. 90 Degree Bends And Hidden Bracing Create A Sleek Look
- Hidden But Sturdy Bracing And Hardware Is Coated To Help Prevent Rust And Keep Your Tubes Strong
- Hidden But Sturdy Bracing And Hardware Is Coated To Help Prevent Rust And Keep Your Tubes Strong
KAI – Door Seal (Part No.GM1390128)
from
$32.99
New Standard Replacement Driver Side Outer Weather Strip
Product Features:
See More
Product Features:
- Front, Driver Side
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Dee Zee – Mesh, Textured, Black, Aluminum, Used With Cross Bed Tool Box, Curved Design (Part No.DZ95050RTB)
from
$869.99
Even if you secure your cargo properly, it can still happen. Driving on todays hectic roads can lead to extreme stopping situations that could end up sending cargo barreling through your truck cab rear window. With the Dee Zee Cab Rack this is no longer a concern. Made of 100 Percent 2.5 Inch aluminum tubing with a protective textured black powder coating, our cab racks are built to handle as much abuse as you can throw at them. A rear window protection screen consists of either heavy duty ultra-mesh – for your protection and visibility requirements.
Product Features:
See More
Product Features:
- Rugged Protection For Your Trucks Rear Cab Area
- 2.5 Inch Hexagonal Aluminum Tubing For Rugged Construction
- Heavy-Duty Aluminum Ultra Mesh Offers More Visibility And Protection Depending On Your Needs
- Protective Textured Black Powder Coat Finish Keeps Your Rack Looking Fresh
- Integrated Channel System For Easy Addition Of Accessories
- Install Into Existing Stake Pocket Holes
Covercraft – PRONET Tailgate Net (Part No.PN012)
from
$109.99
Prone is a high performance tailgate net that adds a sporty aerodynamic style to your truck and increases air flow through your truck bed. Prune’s are known to improve gas mileage by eliminating wind drag. Easily installs with four mounting holes, resulting in a perfectly flat, sag-free net. Complements and fits most pickups. Constructed from heavy duty 22 oz vinyl-coated polyester fabric with stainless steel mounting hardware for long lasting durability.
Product Features:
See More
Product Features:
- The Leader In Quality & Fit & Finish
- Patented Sag-free Design
- Only Four Holes Needed for Installation
- Best Looking Even-Tensioning Design
- Available In Four Styles
- 18 in height x 59.75 in width US Flag
KAI – Hood Hinge (Part No.GM1236117)
from
$57.99
New Standard Replacement Driver Side Hood Hinge
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Tailgate (Part No.GMK414082554)
from
$509.99
New Goodmark Tailgate Shell With Chevrolet Lettering, For Stepside Pickups
Product Features:
See More
Product Features:
- For Stepside Pickups
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – New Standard Replacement Passenger Side Grille Molding, On Fender, Chevy Only (Part No.GM1213101)
from
$21.99
With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Passenger Side Grille Molding, On Fender, Chevy Only. It is Designed to Replace Your Existing Grille Molding. Check to Be Sure it Fits Your Vehicle.
Product Features:
See More
Product Features:
- On Fender, Chevy Only, Made Of Aluminum
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Stationary, Aluminum (Part No.124037)
from
$328.99
With over 70 years of manufacturing excellence, CARR is a third generation business that remains firmly committed to serving you. All CARR accessories are manufactured for a precise fit for today vehicles. Our manufacturing processes allows us to design products that give your vehicle unique personal style and appeal. Our cast aluminum construction is time-proven for durability and strength. All CARR products carry a limited lifetime warranty.
Product Features:
See More
Product Features:
- Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
- Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Today Vehicles
- Rugged Tread Pattern Provides For Safe And Attractive Non-Slip Surface
- Innovative Stylish Design
- Strong Construction To Hold Up Under Extreme Conditions
- Exclusive New Multi-Mount System
- Rocker Panel Installation Provides For The Strongest And Easiest Installation Of Any Step Products
KAI – Truck Bed Panel (Part No.GMK4145630812)
from
$238.99
New Goodmark Front Pickup Box Panel, Fleetside, Can Use For 73-80
Product Features:
See More
Product Features:
- Fleetside Can Use For 73-80
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Energy Suspension – Body Cab Mount Set (Part No.3.4121R)
from
$145.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Assures Longer Lasting Cab to Bed Alignment
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
KAI – Fender Extension Panel (Part No.RRP114)
from
$25.99
New Standard Replacement Driver Side Rear Slip-On Fender Section, 41 5/8 X 12
Product Features:
See More
Product Features:
- 41 5/8 X 12, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Sheetmetal Sheet (Part No.RRP960)
from
$13.99
New, Standard Replacement Flex Edge, With 3/4 Lip, 36 X 3
Product Features:
See More
Product Features:
- Meets All Federal Motor Safety Standards
- No Drilling Or Modifications Needed For Installation
- Same Form Fit As OE
AmeriSeal – Beltline Kit Front Door (Part No.31253)
Burco – Side View Replacement Mirror (Part No.2211)
from
$34.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Needa Parts – Door Striker Bolt, 1/2-13 In. (Part No.38420)
from
$15.99
This door lock striker is designed to match the fit and function of the original striker on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this door lock striker is designed to match the fit and function of the original striker on specified vehicles
- Restores functionality – reliable replacement for an original part that has failed due to collision damage or fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Hood Release Cable with Handle (Part No.912-020)
from
$41.99
Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this hood release cable is made to match the original cable on specific vehicles
- Durable construction -manufactured within strict tolerances for reliable longevity
- Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
- Trustworthy value – backed by team of engineers and quality control experts in the United States
Dorman – Help – Door Hinge Pin And Bushing Kit – 1 Pins And 4 Bushings (Part No.38400)
from
$8.49
This door hinge pin & bushing kit is designed to match the original parts required to restore door alignment and function on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this door hinge pin & bushing kit is designed to match the original pin and bushing required to restore the alignment and proper function of a door on specified vehicles
- Ideal solution – this pin and bushing are reliable replacements for original components that have failed due to wear
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Window Regulator: Power, 1 Pack (Part No.740-516)
from
$75.99
This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
- Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
- Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
- Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
KAI – Tailgate Hinge Kit (Part No.GMK414482373L)
from
$25.99
New Goodmark Driver Side Tailgate Trunnion, For Fleetside Pickups
Product Features:
See More
Product Features:
- For Fleetside Pickups
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Tailgate Stop Bumper (Part No.GMK4143826672P)
from
$38.99
New Goodmark Pair Of Lower Tailgate Bumpers
Product Features:
See More
Product Features:
- Pair
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Hood Insulation Clip (Part No.GMKHWB2401)
from
$10.99
New Goodmark Box Of 25 Hood Pad Clips, Replaces Gm 3977775, 2 Inch Diameter
Product Features:
See More
Product Features:
- 2 Inch Diameter
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
TrailFX – Xover Deep Angle Lp, Single Lid, Matte Black Aluminum, 69"L X 19.25"W X 17.5"H (Part No.121693C)
from
$777.99
TrailFX aluminum tool boxes offer the widest selection of sizes and styles in the industry. These superior quality boxes are packed with features, yet affordably priced to fit your budget.
Product Features:
See More
Product Features:
- Strong And Durable
- Lid Has Two Layers Of Aluminum And A Higher Density Foam Fill Than Any Of The Competitive Boxes On The Market. Twist Handle Brings A More Stylish Look Compared To Traditional Boxes
- More Stylish Look Compared To Traditional Boxes
- Box Does Not Block Your View From Behind
- The Body Of The Box Features Fully TIG Welded Seams And A Patented Built-In Small Parts Storage Bin, Which Offers Convenience And Adds Strength To The End Of The Box As Well
- Latching System Features A High-Quality Stainless Steel Latch For Lasting Durability And Convenience
- The Patented Up-And-Over Rod Does Not Encumber The Working Space Of The Box And Keeps The Rod Out Of Harms Way, Prolonging The Life Of The Latching System
- Tray Provides Removable Storage Space For Small Items Making It Makes It Easy To Transport Small Items To And From Your Jobsite Or Garage
- Universal Design Allows Box To Fit Any Compact Truck
KAI – Roll Pan (Part No.EFXRP16)
from
$193.99
New ProEFX Rear Roll Pan, Without License Plate Part
Product Features:
See More
Product Features:
- Without License Plate Part
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Quarter Panel (Part No.GMK4174610732R)
from
$117.99
New Goodmark Passenger Side Lower Front Quarter Panel Patch, 7 3/4 Inches Wide X 14 1/2 Inches High
Product Features:
See More
Product Features:
- 7 3/4 Inches Wide X 14 1/2 Inches High
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Door Seal (Part No.GM1391127)
from
$32.99
New Standard Replacement Weatherstrip, Inner Window, Passenger Side
Product Features:
See More
Product Features:
- Inner Window, Passenger Side
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Dorman – Help – Door Handle, Interior – OE No.:15597654 -Finish: Chrome (Part No.77065)
from
$25.99
Want a new interior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
- Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
- Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
- Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
Dorman – Window Regulator hardware Kit – Scissor Type (Part No.702-013)
from
$10.99
This window regulator hardware kit is designed to match the original hardware required to service or install the window regulator on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this window regulator hardware kit is designed to match the original hardware required to service or install the window regulator on specified vehicles
- Ideal solution – this kit is a reliable replacement for original components that have been lost or broken
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Upgrade your 1978 Chevrolet K20 with Top-Quality Body Parts
When it comes to maintaining or upgrading your 1978 Chevrolet K20, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Body Parts are key to keeping your K20 functioning at its best. At Advance Auto Parts, we offer a wide selection of 118 Body Parts for the 1978 Chevrolet K20, designed to meet your needs without breaking the bank.
From
Vehicle Window
replacements to
Vehicle Doors
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Body Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Body Parts for your 1978 Chevrolet K20 at great prices.
Our Body Parts inventory for this model
ranges from just $2.29 to $869.99, with
an average price of $89.32.
Our 118 Body Parts in stock come from 14 trusted brands, so you’re sure to find the right part for your 1978 Chevrolet K20 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1978 Chevrolet K20, we stock popular OEM and aftermarket Body Parts from top names
like Dorman, and more.
Dorman Body Parts
start at just $41.99 and boast an impressive 4.2 stars average rating from customers.
With 564 customer reviews and counting, our 1978 Chevrolet K20 Body Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Body Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1978 Chevrolet K20 is always ready to roll. We’re committed to providing you with everything you need to keep your K20 in top shape, all in one place.
Start shopping confidently below for your 1978 Chevrolet K20!
Best-Selling Vehicle Windows for 1978 Chevrolet K20s
Enhance the driving experience in your Chevrolet with 4 quality Vehicle Window components, starting at $10.99.
Dorman – Front Driver Side Window Regulator: Manual, 1 Pack (Part No.740-651)
from
$68.99
This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
- Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
- Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
- Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
Dorman – Window Regulator hardware Kit – Scissor Type (Part No.702-013)
from
$10.99
This window regulator hardware kit is designed to match the original hardware required to service or install the window regulator on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this window regulator hardware kit is designed to match the original hardware required to service or install the window regulator on specified vehicles
- Ideal solution – this kit is a reliable replacement for original components that have been lost or broken
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Window Regulator: Manual, 1 Pack (Part No.740-650)
from
$55.99
This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
- Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
- Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
- Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
KAI – Window Channel (Part No.GMK4144418732)
from
$12.99
New Goodmark Driver Or Passenger Side Door Window Division Post Channel, 2 Required
Product Features:
See More
Product Features:
- 2 Required
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Most Popular 1978 Chevrolet K20 Vehicle Doors
Customize your Chevrolet with 14 Vehicle Doors products
like Door Hinge Pin Kits,
Door Jamb Switches, and
Door Striker Bolts, all
priced under $78.99.
Dorman – Help – Door Hinge Pin And Bushing Kit – 1 Pins And 4 Bushings (Part No.38400)
from
$8.49
This door hinge pin & bushing kit is designed to match the original parts required to restore door alignment and function on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this door hinge pin & bushing kit is designed to match the original pin and bushing required to restore the alignment and proper function of a door on specified vehicles
- Ideal solution – this pin and bushing are reliable replacements for original components that have failed due to wear
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Needa Parts – Door Striker Bolt, 1/2-13 In. (Part No.38420)
from
$15.99
This door lock striker is designed to match the fit and function of the original striker on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this door lock striker is designed to match the fit and function of the original striker on specified vehicles
- Restores functionality – reliable replacement for an original part that has failed due to collision damage or fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
KAI – Door Hinge (Part No.GMK404640269S)
from
$38.99
New Goodmark Door Hinge Repair Kit To Repair 2 Front Doors
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Needa Parts – Door Hinge Bushings, .345 In. Id X .420 In. Od X .305 In. Height (Part No.38375)
from
$2.29
This door hinge bushing is designed to match the fit & function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this door hinge bushing matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
KAI – Door Seal (Part No.GM1390101)
from
$40.99
New Standard Replacement Driver Or Passenger Side Door Weatherstrip
Product Features:
See More
Product Features:
- Front
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Door Stop (Part No.GMK414440373S)
from
$9.99
New Goodmark 2 Piece Front Door Bumper Kit, 2 Kits Required
Product Features:
See More
Product Features:
- 2 Kits Required
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Door Seal (Part No.GM1390128)
from
$32.99
New Standard Replacement Driver Side Outer Weather Strip
Product Features:
See More
Product Features:
- Front, Driver Side
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Door Seal (Part No.GM1391128)
from
$32.99
New Standard Replacement Passenger Side Outer Weatherstrip
Product Features:
See More
Product Features:
- Passenger Side, Outer
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – Door Lock Kit (Part No.DLC1051)
from
$27.99
Application matched component to ensure the system can be returned to like new condition.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
KAI – Door Hinge (Part No.GMK4144401772L)
from
$56.99
New Goodmark Driver Side Lower Front Door Hinge
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – Door Jamb Switch (Part No.SAA3759)
from
$10.99
Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. Vehicle switches provide versatile control for various electrical functions within the vehicle, enhancing convenience and safety by allowing drivers to easily operate features such as lights, wipers, and accessories with a simple flick or press. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.
Product Features:
See More
Product Features:
- Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
- Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
- Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
- Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.
AmeriSeal – Beltline Kit Front Door (Part No.31253)
AmeriSeal – Beltline Kit Cargo Door (Part No.31257)
Carquest Premium – Door Lock Kit (Part No.DLC1167)
from
$24.99
Application matched component to ensure the system can be returned to like new condition.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Top Picks for 1978 Chevrolet K20 Vehicle Hoods
Upgrade Chevrolet K20s with top-quality Vehicle Hoods parts, including 3 OEM and aftermarket selections for your 1978 model.
Dorman – Hood Release Cable with Handle (Part No.912-020)
from
$41.99
Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this hood release cable is made to match the original cable on specific vehicles
- Durable construction -manufactured within strict tolerances for reliable longevity
- Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
- Trustworthy value – backed by team of engineers and quality control experts in the United States
KAI – Hood Hinge (Part No.GM1236117)
from
$57.99
New Standard Replacement Driver Side Hood Hinge
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Hood Insulation Clip (Part No.GMKHWB2401)
from
$10.99
New Goodmark Box Of 25 Hood Pad Clips, Replaces Gm 3977775, 2 Inch Diameter
Product Features:
See More
Product Features:
- 2 Inch Diameter
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
In-Demand Vehicle Latches and Handles for 1978 Chevrolet K20s
Select from 4 premium Vehicle Latches and Handles parts for your 1978 Chevrolet K20, with prices ranging from $26.99 to $34.99.
KAI – Tailgate Latch Assembly (Part No.GMK414583585L)
from
$26.99
New Goodmark Driver Side Tailgate Latch, 2nd Design
Product Features:
See More
Product Features:
- 2nd Design
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Tailgate Latch Assembly (Part No.GMK414583585R)
from
$26.99
New Goodmark Passenger Side Tailgate Latch, 2nd Design
Product Features:
See More
Product Features:
- 2nd Design
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Exterior Door Handle (Part No.GM1310104)
from
$34.99
New Standard Replacement Driver Side Exterior Door Handle
Product Features:
See More
Product Features:
- Made Of Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Dorman – Help – Interior Door Handle Black Chrome (Part No.77723)
from
$34.49
Want a new interior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
- Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
- Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
- Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
Most Sold 1978 Chevrolet K20 Bodies and Fender Parts
Explore our best-selling Chevrolet parts for the 1978 K20 among 33 OEM and aftermarket options starting from $8.99.
ARIES – 3 Inch Round Side Bars (Part No.204041)
from
$153.99
ARIES 3″ side bars are more than a fancy decal for your truck, Jeep or SUV. They are a confident first step on each new adventure. These 3″ nerf bars are constructed from strong carbon steel for superior rigidity, and they feature a sleek semi-gloss black powder coat finish. For an added edge, each nerf bar also goes through an E-coat process, before receiving its black powder coat, to strengthen and protect the final finish against peeling, chipping and scratching. ARIES 3″ round side bars are also available in polished stainless steel or semi-gloss black powder-coated steel. All ARIES 3″ nerf bars come with heavy-duty steel brackets and non-skid step pads. The mounting brackets are strong and custom-designed for specific makes and models to allow the side bars to contour to the lines of your vehicle. They offer easy installation and the strength necessary to provide sound footing. These particular custom nerf bars fit specific years of the Chevy C2500, C3500, K2500 or K3500 and GMC C2500, C3500, K2500 or K3500 (see application info to verify fitment). ARIES 3″ round side bars also come with non-skid step pads made of tough polypropylene. These step pads feature a textured pattern for enhanced safety, and they cover a wide portion of the tubes for a more comfortable step.
Product Features:
See More
Product Features:
- Unique bends to contour to the body of the vehicle
- Custom, non-skid step pads for safe entry and exit
- 3″ diameter, heavy-wall tube design
- High-strength carbon steel construction
- Highly rust-resistant semi-gloss black powder coat and E-coat finish
- No-drill, vehicle-specific application for a custom fit
- Heavy-duty steel mounting brackets for a solid step
KAI – B-Pillar/Rocker Panel (Part No.RRP103)
from
$47.99
New Standard Replacement Driver Side Rocker Panel With Short B-Pillar Door Post, 46 3/4 X 11 3/4
Product Features:
See More
Product Features:
- 46 3/4 X 11 3/4, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fender Brace (Part No.GMK4144662731)
from
$20.99
New Goodmark Rear Fender Center Brace, For Stepside Models, 4 Required, Made Of Steel
Product Features:
See More
Product Features:
- For Stepside Models 4 Required Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Pan (Part No.RRP082)
from
$102.99
New Standard Replacement Passenger Side Extended Cab Floor, 24 X 33
Product Features:
See More
Product Features:
- 24 X 33, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Pan (Part No.RRP083)
from
$101.99
New Standard Replacement Driver Side Extended Cab Floor, 24 X 33
Product Features:
See More
Product Features:
- 24 X 33, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
ARIES – 3 Inch Round Side Bars (Part No.204040-2)
from
$203.99
ARIES 3″ side bars add a custom look and dependable footing to your truck, Jeep or SUV. They feature a classic style, a strong design and non-skid step pads. ARIES nerf bars are all made vehicle-specific for a custom, no-drill fit, and they are available in multiple finish options. This set of nerf bars is constructed from 304 stainless steel with a polished finish. Our 304 stainless steel is a true stainless with high nickel content, offering better corrosion resistance and a long-lasting finish. The polish is a triple application, resulting in a mirror-like shine to complement your vehicle. ARIES 3″ round side bars also come with high-strength steel brackets and non-skid step pads. The mounting brackets — as well as the side bars and step pads — are custom-designed for specific makes and models to allow the nerf bars to contour to the lines of your vehicle. This ensures easy, no-drill installation and the strength necessary to provide solid footing. This particular set of custom nerf bars fits specific years of the Chevy or GMC C2500, C3500, K2500 and K3500 (see application info to verify fitment). ARIES 3″ round side bars also come with non-skid step pads made of polypropylene. These wide, custom-positioned step pads feature a textured pattern and cover a wide portion of the tubes to be more comfortable and high-traction, even in wet conditions.
Product Features:
See More
Product Features:
- Unique bends to contour to the body of the vehicle
- Custom, non-skid step pads for safe entry and exit
- 3″ diameter, heavy-wall tube design
- 304 stainless steel construction to be strong and truly rust-resistant
- Mirror-like polished stainless steel finish for a bright, clean accent
- No-drill, vehicle-specific application for a custom fit
- Heavy-duty steel mounting brackets for a solid step
ARIES – 3 Inch Round Side Bars (Part No.204041-2)
from
$203.99
ARIES 3″ side bars add a custom look and dependable footing to your truck, Jeep or SUV. They feature a classic style, a strong design and non-skid step pads. ARIES nerf bars are all made vehicle-specific for a custom, no-drill fit, and they are available in multiple finish options. This set of nerf bars is constructed from 304 stainless steel with a polished finish. Our 304 stainless steel is a true stainless with high nickel content, offering better corrosion resistance and a long-lasting finish. The polish is a triple application, resulting in a mirror-like shine to complement your vehicle. ARIES 3″ round side bars also come with high-strength steel brackets and non-skid step pads. The mounting brackets — as well as the side bars and step pads — are custom-designed for specific makes and models to allow the nerf bars to contour to the lines of your vehicle. This ensures easy, no-drill installation and the strength necessary to provide solid footing. This particular set of custom nerf bars fits specific years of the Chevy or GMC C2500, C3500, K2500 and K3500 (see application info to verify fitment). ARIES 3″ round side bars also come with non-skid step pads made of polypropylene. These wide, custom-positioned step pads feature a textured pattern and cover a wide portion of the tubes to be more comfortable and high-traction, even in wet conditions.
Product Features:
See More
Product Features:
- Unique bends to contour to the body of the vehicle
- Custom, non-skid step pads for safe entry and exit
- 3″ diameter, heavy-wall tube design
- 304 stainless steel construction to be strong and truly rust-resistant
- Mirror-like polished stainless steel finish for a bright, clean accent
- No-drill, vehicle-specific application for a custom fit
- Heavy-duty steel mounting brackets for a solid step
KAI – Roll Pan (Part No.EFXRP15)
from
$199.99
New ProEFX Rear Roll Pan With License Plate, Fleetside
Product Features:
See More
Product Features:
- Fleetside Models
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Roll Pan (Part No.EFXRP16)
from
$193.99
New ProEFX Rear Roll Pan, Without License Plate Part
Product Features:
See More
Product Features:
- Without License Plate Part
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
ARIES – 3 Inch Round Side Bars (Part No.204040)
from
$153.99
ARIES 3″ side bars are more than a fancy decal for your truck, Jeep or SUV. They are a confident first step on each new adventure. These 3″ nerf bars are constructed from strong carbon steel for superior rigidity, and they feature a sleek semi-gloss black powder coat finish. For an added edge, each nerf bar also goes through an E-coat process, before receiving its black powder coat, to strengthen and protect the final finish against peeling, chipping and scratching. ARIES 3″ round side bars are also available in polished stainless steel or semi-gloss black powder-coated steel. All ARIES 3″ nerf bars come with heavy-duty steel brackets and non-skid step pads. The mounting brackets are strong and custom-designed for specific makes and models to allow the side bars to contour to the lines of your vehicle. They offer easy installation and the strength necessary to provide sound footing. These particular custom nerf bars fit specific years of the Chevy C2500, C3500, K2500 or K3500 and GMC C2500, C3500, K2500 or K3500 (see application info to verify fitment). ARIES 3″ round side bars also come with non-skid step pads made of tough polypropylene. These step pads feature a textured pattern for enhanced safety, and they cover a wide portion of the tubes for a more comfortable step.
Product Features:
See More
Product Features:
- Unique bends to contour to the body of the vehicle
- Custom, non-skid step pads for safe entry and exit
- 3″ diameter, heavy-wall tube design
- High-strength carbon steel construction
- Highly rust-resistant semi-gloss black powder coat and E-coat finish
- No-drill, vehicle-specific application for a custom fit
- Heavy-duty steel mounting brackets for a solid step
KAI – Sheetmetal Sheet (Part No.RRP960)
from
$13.99
New, Standard Replacement Flex Edge, With 3/4 Lip, 36 X 3
Product Features:
See More
Product Features:
- Meets All Federal Motor Safety Standards
- No Drilling Or Modifications Needed For Installation
- Same Form Fit As OE
KAI – Fender (Part No.GM1241122)
from
$528.99
New Standard Replacement Passenger Side Fender
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Quarter Panel (Part No.GMK4174610732R)
from
$117.99
New Goodmark Passenger Side Lower Front Quarter Panel Patch, 7 3/4 Inches Wide X 14 1/2 Inches High
Product Features:
See More
Product Features:
- 7 3/4 Inches Wide X 14 1/2 Inches High
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Body Mount Set (Part No.GMK4144990732S)
from
$63.99
New Goodmark Rear Cab Mounts, For 4WD Models
Product Features:
See More
Product Features:
- For 4WD Models
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Quarter Panel Patch (Part No.RRP150)
from
$49.99
New Standard Replacement Passenger Side Quarter Panel Rear Section, 60 1/2 X 28
Product Features:
See More
Product Features:
- 60 1/2 X 28, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Quarter Panel Patch (Part No.RRP151)
from
$46.99
New Standard Replacement Driver Side Rear Quarter Panel Section, 60 1/2 X 28
Product Features:
See More
Product Features:
- 60 1/2 X 28, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – B-Pillar/Rocker Panel (Part No.RRP102)
from
$46.99
New Standard Replacement Passenger Side Rocker Panel With Short B-Pillar Door Post, 46 3/4 X 11 3/4
Product Features:
See More
Product Features:
- 46 3/4 X 11 3/4, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Pan (Part No.RRP147)
from
$43.99
New Standard Replacement Driver Side Cab Floor, Front Section, 22 1/4 X 29
Product Features:
See More
Product Features:
- Front Section, 22 1/4 X 29, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Pan (Part No.RRP146)
from
$41.99
New Standard Replacement Passenger Side Front Cab Floor Section, 22 1/4 X 29
Product Features:
See More
Product Features:
- 22 1/4 X 29, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Wheel Arch Trim (Part No.GM1290102)
from
$32.99
New Standard Replacement Front Driver Side Wheel Opening Molding
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Front Passenger Side Wheel Opening Molding, Made Of Steel (Part No.GM1291102)
from
$32.99
New Standard Replacement Front Passenger Side Wheel Opening Molding
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Wheel Arch Trim (Part No.GM1791102)
from
$31.99
New Standard Replacement Rear Passenger Side Wheel Opening Molding
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Rocker Panel (Part No.RRP101)
from
$27.99
New Standard Replacement Driver Side Rocker Panel, Slip-On Type, 42 1/2 X 5 1/2
Product Features:
See More
Product Features:
- Slip-On Type, 42 1/2 X 5 1/2, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Rocker Panel (Part No.RRP100)
from
$26.99
New Standard Replacement Passenger Side Rocker Panel, Slip-On Type, 42 1/2 X 5 1/2
Product Features:
See More
Product Features:
- Slip-On Type, 42 1/2 X 5 1/2, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Top-Rated Body Parts Brands For Your 1978 Chevrolet K20
Shop for the best-rated brands offering Body Parts and other products for your 1978 Chevrolet K20s. Below you’ll find some of our best rated Body Parts from Dorman, and more. Body Parts from these brands that fit a 1978 K20 start at just $41.99 and are rated as high as 4.2 stars. OEM and aftermarket Body Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Dorman 1978 Chevrolet K20 Body Parts
When it comes to maintaining or upgrading your 1978 Chevrolet K20, using quality Body Parts is essential to ensure durability and a perfect fit. Dorman ticks all of those boxes. We offer a wide selection of Dorman Body Parts, specifically designed for the 1978 Chevrolet K20. With over 3 Dorman brand Body Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $41.99, with an average price of just $59.66. Plus, with over 10 customer reviews and an average rating of 4.2 stars, you can trust that our Dorman Body Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
FAQs for 1978 Chevrolet K20 Body Parts
Which Body Parts are best-sellers for 1978 Chevrolet K20s?
Out of 118 Body Parts that fit 1978 Chevrolet K20s, the following parts are the top sellers:
- Door Striker Bolt, 1/2-13 In. (5706602) – $15.99
- Bumper Bolt Kit (11750271) – $8.99
- Replacement Mirror Glass (6210189) – $19.99
What’s the price range for 1978 Chevrolet K20 Body Parts?
Body Part prices for the 1978 Chevrolet K20 start at $2.29 and go up to $869.99 for the most premium parts.
What’s the average price of a Body Part for a 1978 Chevrolet K20?
The average price for Body Parts for the 1978 Chevrolet K20 is $89.32. Keep in mind the variety of part types within our Body Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Body Parts for other Chevrolet K20 model years?
What are the cheapest Body Parts for my 1978 Chevrolet K20?
The cheapest 1978 Chevrolet K20 Body Parts we carry in stock are:
- Door Hinge Bushings, .345 In. Id X .420 In. Od X .305 In. Height (9111131) – $2.29
- Door Hinge Pin And Bushing Kit – 1 Pins And 4 Bushings (5701430) – $8.49
- Door Hinge Bushing Assortment – 4 Sizes (9110084) – $8.99
- Bumper Bolt Kit (11750271) – $8.99
- Truck Cab Corner (11756315) – $8.99
What are the top-rated Body Parts that fit the 1978 Chevrolet K20?
Out of 564 reviews by customers, our 1978 Chevrolet K20 Body Parts have an average customer rating of . These are some of the highest-rated Body Part types for the 1978 Chevrolet K20 and their top-rated products:
- Vehicle Hoods
- Hood Release Cable with Handle (10039290) – $41.99
- Vehicle Windows
- Hood Release Cable with Handle (10039290) – $41.99
What types of Body Parts do you sell for my 1978 Chevrolet K20?
As of 11/2/25, these are some of the most in-demand types of Body Parts for a 1978 Chevrolet K20:
Can I get help with 1978 Chevrolet K20 Body Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Body Parts and more.
What is your return policy for Chevrolet K20 Body Parts?
Advance Auto Parts keeps returns simple. For new Chevrolet K20 Body Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
