1978 Chevrolet Corvette Engine Cooling Parts

Essential 1978 Chevrolet Corvette Engine Cooling Parts

Carquest Premium – Radiator Cap: 13 PSI (Part No.10229)

Radiator Cap: 13 PSI

from

$9.79
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

NTK – Engine Coolant Temperature Sensor (Part No.EF0075)

Engine Coolant Temperature Sensor

from

$38.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:
  • OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
  • FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
  • THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
See More

Felpro – Engine Water Pump Gasket (Part No.5159)

Engine Water Pump Gasket

from

$1.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)

Radiator Cap Tester Adapter

from

$14.29
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

Carquest Premium – Radiator Cap: 16 PSI (Part No.10226)

Radiator Cap: 16 PSI

from

$9.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.54218)

Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack

from

$13.99
Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:
  • Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap.
  • Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
  • Seamless fit – reverse-engineered from the original equipment to fit perfectly
  • Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership
See More

Carquest Premium – 2 Pole Radiator Fan Motor (Part No.35656)

2 Pole Radiator Fan Motor

from

$34.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
See More

Motorad UltraStats – Thermostat: With Seal, 187 Degrees (Part No.5456-187)

Thermostat: With Seal, 187 Degrees

from

$27.49
This premium upgraded thermostat is everything you were looking for. UltraStat Thermostats are the toughest thermostats on the market. All heavy gauge stainless steel construction provides long-life durability, as well as complete corrosion resistance. Exclusive BLVT Valve technology minimizes thermal shock to cooling system components. This is the perfect upgrade to help insure your cooling system is working exactly as you need and expect it to for longevity.

Product Features:
  • Heavy gauge stainless steel components offer increased reliability and long-lasting durability
  • Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
  • Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
  • AccuSpring Design for stable temperature control and increased cabin comfort
See More

Mr. Gasket – Water Outlet Gasket (Part No.740C)

Water Outlet Gasket

from

$8.49
This is a high quality gasket that will seal that leaking water neck, and provide you with years of service. This gasket works well in all applications.

Product Features:
  • Made From Cellulose/Nitrile Composition
  • Provides Excellent Sealing And Durability
  • These Gaskets Are Die Cut For a Precision Fit
  • Fits Small Block Chevy V8 Engines 1955-’90
  • Fits Big Block Chevy V8 Engines 1965-’90
  • Fits Small Block Chrysler 318/360 1979-’92
  • Fits Small Block Chrysler 3.9L/5.2L/5.9L Magnum 1992-’03
See More

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.432360)

Radiator: With Transmission Oil Cooler

from

$248.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
See More

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Adjustable Thermostatic Fan Control

from

$55.99
Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:
  • Adjustable thermostatic fan control
  • 160-210°F push-in probe
  • For use with Imperial electric fans
  • Probe installs into radiator fins
See More

Edelbrock – Water Pump Cartridge for Small-Block Chevy (Part No.8828)

Water Pump Cartridge for Small-Block Chevy

from

$219.99
Edelbrock #8828 Water Pump small block Chevy cartridge style race designed for circle track and endurance racing applications, they feature a revised impeller entry, a hard black anodized finish and .100″ thicker rear cover for greater durability. Auxilia

Product Features:
  • Standard Impeller Rotation
  • Stainless Steel Material
  • 0.750 in. Ball/Ball Bearing
  • 5.8125 in. Block To Hub Height
  • Replacement Cartridge For Water Pump #8827
See More

Mr. Gasket – Chrome Plated Steel Water Pump Pulley (Part No.4974)

Chrome Plated Steel Water Pump Pulley

from

$59.19
Replace your stock black engine pulleys with a pair of chrome plated steel pulleys from Mr. Gasket. The pulleys are highly polished then chrome plated for lasting beauty. Designed for small and big block Chevrolet engines with 5/8 inch water pump shaft.

Product Features:
  • Highly Polished For Lasting Beauty
See More

Flex A Lite – 400 Series Nylon Flex Fan (Part No.418)

400 Series Nylon Flex Fan

from

$34.99
400 Series Nylon Flex Fan

Carquest Premium – Coolant Housing/Water Outlet: Gasket Included (Part No.84820)

Coolant Housing/Water Outlet: Gasket Included

from

$21.99
We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:
  • Meets and/or exceeds OEM standard
  • Includes quality gasket or O-ring to ensure proper seal (where applicable)
  • Coated with corrosion and rust inhibitor
  • 100% leak tested
  • Direct-fit replacement for ease of installation
See More

Carquest Premium – Universal Fan Clutch – 7" Thermal Heavy Duty (Part No.215041)

Universal Fan Clutch - 7" Thermal Heavy Duty

from

$51.99
Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. The fan clutch is the component of the cooling system that varies the fan speed to meet the cooling needs of the engine. The fan clutch provides high airflow volume and, by only operating the fan as needed, promotes good fuel economy. CARQUEST fan clutches are designed to meet OE performance specifications.

Product Features:
  • CARQUEST Premium Fan Clutch
  • 7″ thermal heavy-duty
  • Designed, tested and built by application
  • OE performance, fit and appearance
See More

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Felpro – Engine Water Pump Gasket (Part No.13032)

Engine Water Pump Gasket

from

$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Mr. Gasket – Bolt Water Pump (Part No.4996)

Bolt Water Pump

from

$36.49
This Mr. Gasket Water Pump Bolt Set includes chrome plated grade 5 hex head fasteners and AN style washers to install the water pump on your small block Chevrolet with the short style water pump. AN washers have no exposed shoulder which offers a professional appearance. Includes one 3/8 inch-16 x 2-1/2 bolt, three 3/8 inch-16 x 1-3/4 inch bolts, and four 3/8 inch AN washers.

Product Features:
  • Chrome plated
  • Grade 5
  • AN washers with no exposed shoulder for a professional appearance
See More

Edelbrock – Water Pump Cartridge for Small-Block Chevy (Race Style) (Part No.8827)

Water Pump Cartridge for Small-Block Chevy (Race Style)

from

$435.99
Edelbrock #8827 Water Pump small block Chevy cartridge style race ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “super cooling

Product Features:
  • Standard Impeller Rotation
  • 0.750 in. Pilot Shaft
  • 0.750 in. Ball/Ball Bearing
  • 5.8125 in. Block To Hub Height
  • Satin Finish
See More

Felpro – WATER PUMP MOUNTING GASKET SET (Part No.ES 73037)

WATER PUMP MOUNTING GASKET SET

from

$3.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Flex A Lite – Belt-Driven Fan Spacer Kit (Part No.14544)

Belt-Driven Fan Spacer Kit

from

$19.79
Belt-Driven Fan Spacer Kit

Felpro – WATER OUTLET GASKET (Part No.35562 T)

WATER OUTLET GASKET

from

$19.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Problem-solving gaskets featuring advanced sealing technologies designed specifically for the repair environment
  • PermaDryPlus water outlet gaskets utilize rigid carrier construction and silicone sealing beads to ensure a long-lasting seal, including those with warped housing flanges
  • Validated for fit, form, and function
  • Quality that you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Dorman – Radiator Drain Petcocks (Part No.G1060289694DOR)

Radiator Drain Petcocks

from

$8.95
Dorman offers a variety of Radiator Drain Petcocks for a range of applications. The high-quality design ensures effective draining of the cooling system.

Product Features:
  • Available in several styles, including standard, screw-in, and push-in with captive thread
  • Direct replacement Radiator Drain Petcocks available (where applicable) to ensure a proper fit
  • Durably engineered for a long service life
  • Easy to use, no need to disconnect any of the radiator hoses
See More

ACDelco – Engine Coolant Temperature Sensor (Part No.213-1140)

Engine Coolant Temperature Sensor

from

$19.99
ACDelco Professional Engine Coolant Temperature Sender is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket sender is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Mr. Gasket – Precision Chrome Water Neck with O-Ring Style Seal for Leak-Free Operation (Part No.2661)

Precision Chrome Water Neck with O-Ring Style Seal for Leak-Free Operation

from

$26.99
Precision die cast, these water necks are first polished to a high luster, then chrome plated. Features an O-ring style seal to prevent water leaks. Comes with O-ring gasket and mounting bolts.

Product Features:
  • Precision die-cast
  • Chrome plated for looks
  • O-ring style seal to prevent leaks
  • Mounting hardware included
See More

Carquest Premium – Engine Coolant Temperature Sending Unit Switch Connector (Part No.PTA1217)

Engine Coolant Temperature Sending Unit Switch Connector

from

$5.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Designed for the OE distributor as a direct replacement part
See More

1978 Chevrolet Corvette Engine Cooling Parts

Maybe you’re in the middle of a full rebuild of that 1978 Chevrolet Corvette. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 72 different Engine Cooling Parts in our inventory ranging from $2.79 to $519.99. That means you can find the exact parts or products you need to keep that 1978 Chevrolet Corvette running smoothly.

Engine Cooling Parts are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 1978 Chevrolet Corvette. Carquest Premium, Permatex, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Engine Cooling Parts for your 1978 Chevrolet Corvette, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 985 reviews in this category, some of the top rated parts include Standard Thermostat: 180 Degrees with 4.8 stars and Adjustable Thermostatic Fan Control with 4.8 stars.

So if you’re in the market for aftermarket Engine Cooling Parts to keep your 1978 Chevrolet Corvette rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Engine Cooling Parts Brands To Make Your 1978 Chevrolet Corvette Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1978 Chevrolet Corvette demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Corvette the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.

Popular Flex A Lite Engine Cooling Parts

We carry Flex A Lite parts in our stock across Radiator Fan Spacers categories, plus more. For a 1978 Chevrolet Corvette, our most popular Flex A Lite Engine Cooling Parts include:
Belt-Driven Fan Spacer Kit
from $22.99
(1)
Belt-Driven Fan Spacer Kit
Radiator Fan Spacers

Top 1978 Chevrolet Corvette Engine Cooling Parts from Carquest Premium

Carquest Premium products are another trusted brand when it comes to Engine Cooling Parts for your 1978 Chevrolet Corvette. Popular Carquest Premium parts include:
Standard Thermostat: 195 Degrees
from $9.99
(107)
Standard Thermostat: 195 Degrees
Thermostats
Radiator Cap: 16 PSI
from $9.79
(103)
Radiator Cap: 16 PSI
Engine Coolant Thermostat Housing Caps
Radiator Cap: 16 PSI
from $13.49
(65)
Radiator Cap: 16 PSI
Engine Coolant Thermostat Housing Caps

FAQs for 1978 Chevrolet Corvette Engine Cooling Parts

What are the most purchased Engine Cooling Parts for the 1978 Chevrolet Corvette?

Out of 72 Engine Cooling Parts for the 1978 Chevrolet Corvette, the most popular in our inventory are:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Water Pump Housing Gaskets
Engine Water Pump Gasket
from $2.99
(68)
Engine Water Pump Gasket
Water Pump Gaskets
Engine Coolant Outlet Gasket
from $3.99
(100)
Engine Coolant Outlet Gasket
Thermostat Housing Gaskets

What are the top-rated 1978 Chevrolet Corvette Engine Cooling Parts?

Top-rated Engine Cooling Parts for your 1978 Chevrolet Corvette based on customer reviews/ratings are:
Standard Thermostat: 180 Degrees
from $9.99
(36)
Standard Thermostat: 180 Degrees
“It worked as it should.”
Adjustable Thermostatic Fan Control
from $22.99
(35)
Adjustable Thermostatic Fan Control
“Advance kicks butt”
Adjustable Thermostatic Fan Control
from $55.99
(33)
Adjustable Thermostatic Fan Control
“I used this fan control on my 2006 pt cruiser. It’s simple to install and works great. I’m going to get another one for my 1999 jeep Cherokee.”