1978 Chevrolet Camaro Suspension Parts
Find Your Specific 1978 Chevrolet Camaro Suspension Parts
Below you will find various in-demand Chevrolet Suspension Parts, components and accessories for your 1978 Camaro. Advance Auto Parts has popular Camaro parts like Coil and Leaf Springs, Shocks and Struts, Air Suspension and Kits and more. You’ll also find aftermarket and OEM Suspension Parts for other Camaro model years including
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022,
2023 and more. Select a category of 1978 Chevrolet Camaro Suspension Parts below and start saving instantly.
Popular 1978 Chevrolet Camaro Suspension Parts Categories
Essential Suspension Parts for 1978 Chevrolet Camaros
Monroe – Max-Air Air Shock Absorber (Part No.MA711)
from
$158.99
Ideal for hauling, Monroe® Max-Air® shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)
Product Features:
See More
Product Features:
- MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission, see owner’s manual)
- EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor, pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
- EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
- BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
- CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
- Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
- Special Air Fitting: Resists air leakage.
Whiteline – Control Arm Lower Front Outer Bushing (Part No.W63155)
from
$70.99
Suffering uneven tyre wear, unbalanced braking or a less predictable rear end while cornering. It could be your control arm bushings have failed. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long lasting durability for a safer more predictable vehicle.
Product Features:
See More
Product Features:
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
KAI – Leaf Spring Shock Nut (Part No.GMK4020997672P)
from
$14.99
New Goodmark Leaf Spring Shackle Nut, Package Of 2, Use 6 Nuts Per Car
Product Features:
See More
Product Features:
- Package Of 2 Use 6 Nuts Per Car
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Royal Purple – Max Performance Synthetic Power Steering Fluid (Part No.01326)
from
$6.29
Max Performance Synthetic Power Steering Fluid
Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.28-711356)
from
$167.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.
Product Features:
See More
Product Features:
- Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat (where applicable)
- Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
- Springs are built with U.S. grade steel and designed to match factory ride height and performance
- OE quality strut mount, bearing plate and brackets (where applicable)
- Complete strut assembly is extensively tested for functionality and durability
- Built with a micro-smooth, chrome-plated piston rod
Energy Suspension – Hyper-Flex System (Part No.3.18131R)
from
$215.99
Product Features:
See More
- Incredible Improvement in Control
- Maintains Proper Caster and Camber Alignment
- Increase in Handling and Control
- Greatly Reduce Wheel Hop on Quick Acceleration
- Even Braking Control is Improved
- Better Suspension Stability
Rare Parts – Control Arm Bumper (Part No.RP22455)
from
$29.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Torsional rubber bushings
- UV resistant
- No Squeak
KAI – Leaf Spring Brace (Part No.GMK4021517701L)
from
$86.99
New Goodmark Torque Box Brace, Rear, Driver Side
Product Features:
See More
Product Features:
- Rear Driver Side
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1997)
from
$13.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1998)
from
$13.29
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
MOOG – Leaf Spring Shackle Bushing (Part No.K6559)
from
$12.29
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Dorman – SHACKLE BUSHING (Part No.541-605)
from
$13.99
SHACKLE BUSHING
Energy Suspension – Heavy Duty Shackle Set (Part No.3.2137R)
from
$107.99
Product Features:
See More
- Reduces Wheel Hop in Acceleration
- Prevents Shudder under Braking
- Delivers Greater Handling Control
- Great for Vehicles with High Performance Tires
- Great for Vehicles with Horsepower Upgrades
Energy Suspension – Heavy Duty Shackle Set (Part No.3.2134G)
from
$159.99
Product Features:
See More
- Reduces Wheel Hop in Acceleration
- Prevents Shudder under Braking
- Delivers Greater Handling Control
- Great for Vehicles with High Performance Tires
- Great for Vehicles with Horsepower Upgrades
KYB – Damping Rate Adjustable Strut (Part No.735001)
from
$204.99
KYB AGX manually-adjustable shocks and struts allow you to design your own ride control performance without special tools, quickly and as often as you want. Enthusiasts can increase individual corner damping rates up to 125% more than the vehicles OEM design. For ease of access, depending on vehicle application, the KYB AGX either has an eight position knob or a four position screwdriver slot. However, both offer the same overall capability. One simple adjustment increases both rebound and compression damping. Whether on the street or on a race track, the AGXs velocity sensitive damping valves instantly react to driving conditions to maintain tire contact and vehicle control. The AGX is a great solution for more demanding conditions that OE replacement parts just cant handle.
Product Features:
See More
Product Features:
- Adjustable Performance, Designed For Enthusiasts
- Can Be Adjusted To Add Up To 125% More Damping Force On Your Gm F-Body
- Externally Adjustable Without Lifting The Vehicle Or Removing The Tires
- Features Precision Multi-Stage Hydraulic Valves For A Broad Performance Range
- Uses A Seamless Working Cylinder Matched With A Teflon Coated Piston Band For A Positive Seal And Longer Life
- Engineered To Help Vehicles With Electronic Safety Systems (Esc, Abs, Etc.)
- To Reduce The Chance Of Noise And Vibration KYB Recommends Installing New Strut Mounts, Part Numbers: Sm5027 & Sm5028
KYB – High Pressure Monotube Gas Shock (Part No.KG4515)
from
$72.99
Product Features:
See More
- Adds up to 25% more damping performance over original equipment shocks
- Components and valving designed specifically for classic cars
- High gas pressure design provides instant, extra control
- Monotube design outperforms all other standard shock absorbers
- Unique, air-free, hydraulic unit eliminates performance fade
MOOG – Leaf Spring Shackle Bushing (Part No.K6560)
from
$36.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
MOOG – Leaf Spring Bushing (Part No.SB298)
from
$27.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Energy Suspension – Control Arm Bump Stop Set (Part No.3.9102G)
from
$11.99
Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Helps Prevent Damage to Control Arm
Energy Suspension – Control Arm Bump Stop Set (Part No.3.9102R)
from
$14.99
Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Helps Prevent Damage to Control Arm
KYB – Strut Mount (Part No.L3030569109KYB)
from
$14.03
Strut Mount
Metro Mould – Coil Spring Insulator (Part No.BN 110)
from
$43.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Front Coil Spring Insulator. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
MOOG – Control Arm Shaft Kit (Part No.K5250)
from
$69.99
MOOG® Problem Solver® products incorporate proven design and engineering features for like new steering ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Loose or worn chassis parts can lead to premature tire wear
- Incorporates proven design and engineering features
Rare Parts – Control Arm Shaft Kit (Part No.RP15362)
from
$134.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering response
- Complete kit for 1 arm
- Heat treated steel bushings OR torsional rubber bushings
- Reduces vibration
PRT – COMPLETESTRUTASSMBLY (Part No.920876)
from
$55.99
COMPLETESTRUTASSMBLY
Monroe – Load Adjusting Shock Absorber (Part No.58263)
from
$113.99
Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.
Product Features:
See More
Product Features:
- REDUCES SAG UNDER LOAD — Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
- EXCEPTIONAL HANDLING — Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
- CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
- LONGER SERVICE LIFE — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
- 5/8 nitrocarburized rod for long service life.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK64)
from
$25.99
Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More
Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK18)
from
$36.49
Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More
Upgrade your 1978 Chevrolet Camaro with Top-Quality Suspension Parts
When it comes to maintaining or upgrading your 1978 Chevrolet Camaro, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Suspension Parts are key to keeping your Camaro functioning at its best. At Advance Auto Parts, we offer a wide selection of 56 Suspension Parts for the 1978 Chevrolet Camaro, designed to meet your needs without breaking the bank.
From
Coil and Leaf Spring
replacements to
Shocks and Struts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 1978 Chevrolet Camaro at great prices.
Our Suspension Parts inventory for this model
ranges from just $6.99 to $414.99, with
an average price of $59.10.
Our 56 Suspension Parts in stock come from 15 trusted brands, so you’re sure to find the right part for your 1978 Chevrolet Camaro without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1978 Chevrolet Camaro, we stock popular OEM and aftermarket Suspension Parts from top names
like Valvoline, Monroe, Moog, and more.
Valvoline Suspension Parts
start at just $36.49 and boast an impressive 5 stars average rating from customers.
Monroe and Moog also bring quality to the table, with Suspension Parts available starting at $12.29, and at an average 4 stars rating.
With 1,641 customer reviews and counting, our 1978 Chevrolet Camaro Suspension Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1978 Chevrolet Camaro is always ready to roll. We’re committed to providing you with everything you need to keep your Camaro in top shape, all in one place.
Start shopping confidently below for your 1978 Chevrolet Camaro!
Best-Selling Coil and Leaf Springs for 1978 Chevrolet Camaros
Enhance the driving experience in your Chevrolet with 15 quality Coil and Leaf Spring components, starting at $14.99.
Monroe – Load Adjusting Shock Absorber (Part No.58263)
from
$113.99
Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.
Product Features:
See More
Product Features:
- REDUCES SAG UNDER LOAD — Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
- EXCEPTIONAL HANDLING — Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
- CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
- LONGER SERVICE LIFE — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
- 5/8 nitrocarburized rod for long service life.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
MOOG – Leaf Spring Shackle Bushing (Part No.K6560)
from
$36.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Metro Mould – Coil Spring Insulator (Part No.BN 110)
from
$43.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Front Coil Spring Insulator. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Energy Suspension – Leaf Spring Bushing Set (Part No.3.2103G)
from
$90.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Adds Dramatic Amount of Performance/Durability
- Helps Vehicle Be in Control
- Allows the Suspension to Function Properly
Rare Parts – Spring Bushing (Part No.RP35216)
from
$37.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Heat Treated bushings
- No Squeak
- Reduces vibration
MOOG – Leaf Spring Bushing (Part No.SB298)
from
$27.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Energy Suspension – Leaf Spring Bushing Set (Part No.3.2103R)
from
$90.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Adds Dramatic Amount of Performance/Durability
- Helps Vehicle Be in Control
- Allows the Suspension to Function Properly
Energy Suspension – Heavy Duty Shackle Set (Part No.3.2134G)
from
$159.99
Product Features:
See More
- Reduces Wheel Hop in Acceleration
- Prevents Shudder under Braking
- Delivers Greater Handling Control
- Great for Vehicles with High Performance Tires
- Great for Vehicles with Horsepower Upgrades
KAI – Leaf Spring Shock Kit (Part No.GMK402099867K)
from
$54.99
New Goodmark Leaf Spring Shackle Kit, Steel And Rubber Components
Product Features:
See More
Product Features:
- Steel And Rubber Components
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Energy Suspension – Heavy Duty Shackle Set (Part No.3.2135G)
from
$107.99
Product Features:
See More
- Reduces Wheel Hop in Acceleration
- Prevents Shudder under Braking
- Delivers Greater Handling Control
- Great for Vehicles with High Performance Tires
- Great for Vehicles with Horsepower Upgrades
KAI – Leaf Spring Brace (Part No.GMK4021517701L)
from
$86.99
New Goodmark Torque Box Brace, Rear, Driver Side
Product Features:
See More
Product Features:
- Rear Driver Side
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Leaf Spring Brace (Part No.GMK4021517701R)
from
$86.99
New Goodmark Torque Box Brace, Rear, Passenger Side
Product Features:
See More
Product Features:
- Rear Passenger Side
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
PRT – COMPLETESTRUTASSMBLY (Part No.920876)
from
$55.99
COMPLETESTRUTASSMBLY
Carquest Premium – COMPLET STRUT ASMBLY (Part No.28-920876)
from
$55.99
COMPLET STRUT ASMBLY
KAI – Leaf Spring Shock Nut (Part No.GMK4020997672P)
from
$14.99
New Goodmark Leaf Spring Shackle Nut, Package Of 2, Use 6 Nuts Per Car
Product Features:
See More
Product Features:
- Package Of 2 Use 6 Nuts Per Car
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Most Popular 1978 Chevrolet Camaro Shocks and Struts
Customize your Chevrolet with 16 Shocks and Struts products
like Rear Shock and Struts,
Front Shock and Struts, and
Strut Bellows, all
priced under $155.99.
Energy Suspension – Control Arm Bump Stop Set (Part No.3.9102G)
from
$11.99
Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Helps Prevent Damage to Control Arm
Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5801)
from
$85.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1997)
from
$13.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1998)
from
$13.29
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
Monroe – Gas-Matic Passenger Car Shock Absorber (Part No.55801)
from
$55.99
Monroe® Gas-Matic passenger car shock absorber are gas charged and provide improved control at an economical price.
Product Features:
See More
Product Features:
- Available for import and domestic passenger cars
- Gas-charged unit
- Improved handling and control
- Economical OE replacement
- Meets OE product specifications
Monroe – Gas-Matic Passenger Car Shock Absorber (Part No.55831)
from
$39.99
Monroe® Gas-Matic passenger car shock absorber are gas charged and provide improved control at an economical price.
Product Features:
See More
Product Features:
- Available for import and domestic passenger cars
- Gas-charged unit
- Improved handling and control
- Economical OE replacement
- Meets OE product specifications
KYB – High Pressure Monotube Gas Shock (Part No.KG4515)
from
$72.99
Product Features:
See More
- Adds up to 25% more damping performance over original equipment shocks
- Components and valving designed specifically for classic cars
- High gas pressure design provides instant, extra control
- Monotube design outperforms all other standard shock absorbers
- Unique, air-free, hydraulic unit eliminates performance fade
MOOG – Leaf Spring Shackle Bushing (Part No.K6559)
from
$12.29
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
KYB – Gas Shock (Part No.343128)
from
$54.99
Product Features:
See More
- Recommended OEM replacement shock for classic, domestic cars
- Specifically calibrated to help restore the original handling and control characteristics of the Ford Focus
- Uses a seamless working cylinder matched with a Teflon coated piston band for a positive seal and longer life
- Triple chrome plated piston rod and multi-lip oil seals that reduce wear
- Solid seamless mounting eye rings and bolt bushings to eliminate rattles
Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5831)
from
$44.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Energy Suspension – Control Arm Bump Stop Set (Part No.3.9102R)
from
$14.99
Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Helps Prevent Damage to Control Arm
Lakewood – Drag Shock-70/30:Ford/GM/Mopar (Part No.40121)
from
$104.99
The best all-round choice for vehicles with leaf or coil springs. Properly loads rear wheels to prevent over-reaction and wheel hop.
Product Features:
See More
Product Features:
- Excellent Weight Transfer
- Lets Front End Down Quickly
- Maximum Traction
- Makes Vehicle Safer
- Easier Control At End Of Track
- Better Overall Stability
Lakewood – Drag Shock-90/10:Ford/GM/Mopar (Part No.40101)
from
$99.19
Drag Shock-90/10:Ford/GM/Mopar
Lakewood – REKUDO 70-81 F-BODY ADJ. FRONT SHOCK (Part No.RK300-03)
from
$155.99
REKUDO 70-81 F-BODY ADJ. FRONT SHOCK
Belltech – Nitrogen Gas Charged, Two Year Warranty, Non Adjustable Valving, Single (Part No.10103I)
from
$71.99
Belltech street performance shock absorber has been engineered to provide a premium quality ride for todays larger Trucks and Luxury SUVs. Belltech engineers have developed a great balance between comfort and performance by focusing their attention on tuning the low speed compression and rebound characteristics of this shock absorber
Product Features:
See More
Product Features:
- Belltech Value Orientated Performance Shock Absorber. The Ultimate In Premium Street Performance Solution
- Excellent OEM Quality Replacement Upgrade. Internal Teflon Coated Bushings And Piston Seals Avoid Metal To Metal Contact, Provides Lowest Possible Friction Resulting In Long Lasting Performance
- Oversized Construction Provides Additional Damping Control. Increase In Handling And Performance At Maximum Comfort
- Complements Larger OE And Aftermarket Wheel Or Tire Packages For Increased Tire Contact Area
Dorman – SHACKLE BUSHING (Part No.541-605)
from
$13.99
SHACKLE BUSHING
Top Picks for 1978 Chevrolet Camaro Air Suspension and Kits
Upgrade Chevrolet Camaros with top-quality Air Suspension and Kits parts, including 5 OEM and aftermarket selections for your 1978 model.
Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)
from
$36.49
Valvoline MaxLife Multi-Vehicle Automatic Transmission Fluid (ATF) is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life. Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
- High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
- Developed with anti-wear technology to help improve transmission durability
- Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
- Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V
Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK18)
from
$36.49
Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More
Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK64)
from
$25.99
Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More
Monroe – Max-Air Air Adjustable Air Shock Absorber Pack of 2 (Part No.MA708)
from
$108.99
Ideal for hauling, Monroe Max-Air shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (Capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)
Product Features:
See More
Product Features:
- MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission; see owner’s manual)
- EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor; pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
- EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
- BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
- CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
- Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
- Special Air Fitting: Resists air leakage.
Energy Suspension – Hyper-Flex System (Part No.3.18116R)
from
$414.99
Product Features:
See More
- Incredible Improvement in Control
- Maintains Proper Caster and Camber Alignment
- Increase in Handling and Control
- Greatly Reduce Wheel Hop on Quick Acceleration
- Even Braking Control is Improved
- Better Suspension Stability
In-Demand Control Arms for 1978 Chevrolet Camaros
Select from 20 premium Control Arms parts for your 1978 Chevrolet Camaro, with prices ranging from $6.99 to $122.99.
TRW – Control Arm Stop (Part No.L2060451692TRW)
from
$16.11
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Control Arm Stop is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
- Acoustic measurements to ensure driver comfort
- Strength tests for durability
- Environmental resistance tests for all weather conditions
- Wear and drive tests
- Assembly technique testing of all critical safety features
- Dynamic testing of complete units to ensure leak free performance
- Extensive on-road testing at TRW tracks around the world
MOOG – Control Arm Bumper (Part No.K6606)
from
$16.29
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Loose or worn chassis parts can lead to premature tire wear
- Incorporates proven design and engineering features
MOOG – Control Arm Bushing Kit (Part No.K6109)
from
$24.99
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
- OE-STYLE DESIGN — Engineered to match or exceed OE requirements
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Metal rib design helps lock the inner tube within frame pocket
- Metal surfaces are phosphate coated for corrosion protection
MOOG – Control Arm Bushing Kit (Part No.K6144)
from
$18.29
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
- OE-STYLE DESIGN — Engineered to match or exceed OE requirements
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
MOOG – Control Arm Shaft Kit (Part No.K6146)
from
$70.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Loose or worn chassis parts can lead to premature tire wear
- Incorporates proven design and engineering features
Dorman – Help – Lower Control Arm Bumper (Part No.31061)
from
$9.49
This suspension control arm bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles.
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Energy Suspension – Control Arm Bushing Set (Part No.3.3105R)
from
$109.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Control Arm Bushing Set (Part No.3.3105G)
from
$109.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Rare Parts – Control Arm Bushing (Part No.RP15200)
from
$25.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Torsional rubber bushings
- UV resistant
- No Squeak
Driveworks – Control Arm Bushing (Part No.DW-K6109B)
from
$18.79
Control Arm Bushing
Rare Parts – Control Arm Shaft Kit (Part No.RP15365)
from
$122.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering response
- Complete kit for 1 arm
- Heat treated steel bushings OR torsional rubber bushings
- Reduces vibration
Rare Parts – Control Arm Bushing (Part No.RP15228)
from
$56.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Torsional rubber bushings
- UV resistant
- No Squeak
MOOG – Control Arm Bushing (Part No.K5262)
from
$43.99
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
- OE-STYLE DESIGN — Engineered to match or exceed OE requirements
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
TRW – Control Arm Bushing Kit (Part No.L2040457121TRW)
from
$40.07
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Control Arm Bushing Kit is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
- Designed to reduce vibration and absorb noise.
- Kit includes bushings and hardware – (SEE Note)
TRW – Control Arm Bushing (Part No.L2040212883TRW)
from
$15.33
Control Arm Bushing
Dorman – Suspension Control Arm Bushing Kit (Part No.533-440)
from
$14.99
This suspension control arm bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
MOOG – Control Arm Bushing (Part No.K3113)
from
$12.99
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
- OE-STYLE DESIGN — Engineered to match or exceed OE requirements
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Bushings manufactured from high quality elastomer compounds for durability and ride performance
- Assembled with proper precompression for ultimate in performance and feel
Dorman – Suspension Control Arm Bushing Kit (Part No.533-437)
from
$9.99
This suspension control arm bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Control Arm Stop (Part No.L2060613441DOR)
from
$7.68
Control Arm Stop
Dorman – Suspension Control Arm Bumper (Part No.533-615)
from
$6.99
This suspension control arm bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Top-Rated Suspension Parts Brands For Your 1978 Chevrolet Camaro
Shop for the best-rated brands offering Suspension Parts and other products for your 1978 Chevrolet Camaros. Below you’ll find some of our best rated Suspension Parts from Valvoline, Monroe, and Moog, and more. Suspension Parts from these brands that fit a 1978 Camaro start at just $12.29 and are rated as high as 5 stars. OEM and aftermarket Suspension Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Valvoline 1978 Chevrolet Camaro Suspension Parts
When it comes to maintaining or upgrading your 1978 Chevrolet Camaro, using quality Suspension Parts is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Suspension Parts, specifically designed for the 1978 Chevrolet Camaro. With over 1 Valvoline brand Suspension Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $36.49. Plus, with over 446 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Suspension Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$36.49
$36.49
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon
“Good product”
Popular Monroe 1978 Chevrolet Camaro Suspension Parts
Monroe auto parts is one of the highest quality Suspension Part brands in the market. Any 1978 Chevrolet Camaro owner should feel confident when installing genuine Monroe parts in their vehicle. To ensure the best fit and performance for your 1978 Camaro, Advance Auto Parts carries a full inventory of 10 Monroe Suspension Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Monroe Suspension Parts range from $13.29 to $113.99, plus, with more than 90 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Suspension Parts below will deliver on both quality and value.
from
$113.99
$113.99
(3)
“A GOOD HEAVY DUTY REPLACEMENT FOR OLDER CAR THAT MAY NEED NEW COIL SPRINGS THE INCREASE THE FRONT END LIFE”
FAQs for 1978 Chevrolet Camaro Suspension Parts
Which Suspension Parts are best-sellers for 1978 Chevrolet Camaros?
Out of 56 Suspension Parts that fit 1978 Chevrolet Camaros, the following parts are the top sellers:
- Gas-Matic Passenger Car Shock Absorber (5900000) – $55.99
- Monroe Shock Absorber Air Hose Kit (5100001) – $36.49
- OESpectrum Passenger Car Shock Absorber (19710414) – $85.99
What’s the price range for 1978 Chevrolet Camaro Suspension Parts?
Suspension Part prices for the 1978 Chevrolet Camaro start at $6.99 and go up to $414.99 for the most premium parts.
What’s the average price of a Suspension Part for a 1978 Chevrolet Camaro?
The average price for Suspension Parts for the 1978 Chevrolet Camaro is $59.10. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Suspension Parts for other Chevrolet Camaro model years?
What are the cheapest Suspension Parts for my 1978 Chevrolet Camaro?
The cheapest 1978 Chevrolet Camaro Suspension Parts we carry in stock are:
- Suspension Control Arm Bumper (50211544) – $6.99
- Control Arm Stop (12188674) – $7.68
- Lower Control Arm Bumper (22143281) – $9.49
- Suspension Control Arm Bushing Kit (50211534) – $9.99
- Control Arm Bump Stop Set (22908356) – $11.99
What are the top-rated Suspension Parts that fit the 1978 Chevrolet Camaro?
Out of 1,641 reviews by customers, our 1978 Chevrolet Camaro Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 1978 Chevrolet Camaro and their top-rated products:
- Shocks and Struts
- Control Arm Bump Stop Set (22908356) – $11.99
- Shock-Mate Shock Absorber Boot Kit (15740047) – $13.99
- OESpectrum Passenger Car Shock Absorber (19710414) – $85.99
- Coil and Leaf Springs
- Control Arm Bump Stop Set (22908356) – $11.99
- Shock-Mate Shock Absorber Boot Kit (15740047) – $13.99
- OESpectrum Passenger Car Shock Absorber (19710414) – $85.99
- Control Arms
- Control Arm Bump Stop Set (22908356) – $11.99
- Shock-Mate Shock Absorber Boot Kit (15740047) – $13.99
- OESpectrum Passenger Car Shock Absorber (19710414) – $85.99
What types of Suspension Parts do you sell for my 1978 Chevrolet Camaro?
As of 2/5/25, these are some of the most in-demand types of Suspension Parts for a 1978 Chevrolet Camaro:
Can I get help with 1978 Chevrolet Camaro Suspension Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Suspension Parts and more.
What is your return policy for Chevrolet Camaro Suspension Parts?
Advance Auto Parts keeps returns simple. For new Chevrolet Camaro Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
