1977 Porsche 911 Brake Parts

Essential Brake Parts for 1977 Porsche 911s

ATE – Original Brake Caliper, New – Friction Ready (Part No.N104022646ATE)

Original Brake Caliper, New - Friction Ready

from

$620.69
100% New Caliper – Manufacturer recommends replacing calipers in pairs. With innovative fixed and floating calipers in aluminum and nodular cast iron, ATE is Europe’s market leader. And there is a good reason for that: during development, ATE simulates operational stresses in terms of braking load, vibration, corrosion and wear in extensive series of trials. This means that every basic safety-relevant function is ensured, the sealing of the hydraulic system as much as the venting function of the piston (roll-back), the return (knock-back) function, or the function of the housing/pad guides. ATE original brake calipers are supplied ready-to-install: rear-axle calipers with handbrake are usually pre-filled and preset. This permits simple and correct bleeding in the vehicle.

Product Features:
  • OE quality direct fit application.
  • Friction Ready
  • Corrosion inhibiting protection
  • Ensures long life and maximum performance
  • Natural exterior finish
See More

ATE – Original Brake Caliper, New – Friction Ready (Part No.N104022647ATE)

Original Brake Caliper, New - Friction Ready

from

$615.12
100% New Caliper – Manufacturer recommends replacing calipers in pairs. With innovative fixed and floating calipers in aluminum and nodular cast iron, ATE is Europe’s market leader. And there is a good reason for that: during development, ATE simulates operational stresses in terms of braking load, vibration, corrosion and wear in extensive series of trials. This means that every basic safety-relevant function is ensured, the sealing of the hydraulic system as much as the venting function of the piston (roll-back), the return (knock-back) function, or the function of the housing/pad guides. ATE original brake calipers are supplied ready-to-install: rear-axle calipers with handbrake are usually pre-filled and preset. This permits simple and correct bleeding in the vehicle.

Product Features:
  • OE quality direct fit application.
  • Friction Ready
  • Corrosion inhibiting protection
  • Ensures long life and maximum performance
  • Natural exterior finish
See More

Sebro – Coated Brake Rotor (Part No.N1000133765SEB)

Coated Brake Rotor

from

$186.14
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.

Product Features:
  • OE-Equivalent and Direct fit Application
  • high carbon content disc
  • Protective coating that resists corrosion
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Improved thermal efficiency
See More

Carquest Wearever – Disc Brake Rotor Meets or Exceeds OE Design (Part No.YH145463)

Disc Brake Rotor Meets or Exceeds OE Design

from

$150.99
Carquest Premium painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Premium painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Premium painted brake rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:
  • Meets or exceeds OE design for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Matches OE vane size for proper cooling
  • Optimal metallurgy and casting thickness to prevent warping
  • Air gap eliminates brake fade and increases pad life
  • Non-Directional finish decreases break-in time
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5773)

Vacuum Brake Booster: Without Master Cylinder

from

$124.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5755)

Vacuum Brake Booster: Without Master Cylinder

from

$122.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

FAE – FAE Stop Light Switch (Part No.P305515117FAE)

FAE Stop Light Switch

from

$25.04
The FAE Stop Light Switch is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Original Equipment – Clutch Return Spring (Part No.I400783106OEA)

Clutch Return Spring

from

$14.81
The Original Equipment Clutch Return Spring is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest Wearever – Disc Brake Rotor Meets or Exceeds OE Design (Part No.YH145464)

Disc Brake Rotor Meets or Exceeds OE Design

from

$111.99
Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:
  • Meets or exceeds OE design for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Matches OE vane size for proper cooling
  • Optimal metallurgy and casting thickness to preventing warping
  • Air gap eliminates brake fade and increases pad life
  • Non-directional finish decreases break-in time
See More

Bosch – QuietCast Premium Brake Disc (Rotor) (Part No.N100020721BOS)

QuietCast Premium Brake Disc (Rotor)

from

$94.94
Bosch rotors utilize innovative materials that ensure the very highest quality – and prevent brake judder, noise, vibration and harshness. Bosch QuietCast Premium Disc Brake Rotors utilize vehicle specific castings. The heat flow casting process produces superior G3000, GG20, GG15 and HC (high carbon) casting. Bosch castings provide strength and durability not found in competitive product. While competitors may provide a low cost product which helps save money, their castings can crack and provide poor durability. Bosch QuietCast provides consistent, safe and long lasting performance. Alutherm 80 Coating – Bi-metal aluminum and zinc clean-look coating/Alutherm 80 extends the life of the rotor and provides a clean look for today’s open wheels

Product Features:
  • OE-Equivalent and a direct fit replacement
  • Prevent rust and corrosion with clear-look coating protection
  • Provide a clean look for today’s open-wheeled vehicles
  • Are 100% balanced for smooth operation
  • Factory-engraved edge code and minimum thickness specifications Bosch QuietCast Brake Rotors Brochure
See More

TRW – Brake Master Cylinder (Part No.N300067354TRW)

Brake Master Cylinder

from

$679.26
TRW Automotive supplies master cylinder brake actuation systems featuring quality and performance. TRW’s master cylinder product portfolio covers a wide range of vehicles, from small cars up to truck and SUV platforms. These systems can offer lighter weight, with options such as micro master cylinders and aluminum master cylinders through to heavy-duty master cylinders designed for the durability and variable loading conditions of the light-truck market. These systems function with the help of a series of brake fluid sensors, which are located on the reservoir tank. This series includes vacuum sensors, brake light switches, and travel sensors.

Product Features:
  • Low volume uptake
  • High efficiency
  • Low pressure differential between primary and secondary circuits
  • Good bleedability
  • Cr6-free surfaces for vehicles built from July 2007 (as required by law)
  • Central valve version suitable for ABS
See More

ATE – ATE Brake Master Cylinder (Part No.N300022651ATE)

ATE Brake Master Cylinder

from

$533.00
As the basis for a standardized ATE concept for future tandem master cylinders, ATE has developed a new plunger generation which has many technical enhancements and advantages.

Product Features:
  • Short closing paths
  • Low volume uptake
  • High efficiency
  • Low throttling / after-suction resistance
  • Low pressure differential between primary and secondary circuits
  • Good bleedability
  • Cr6-free surfaces for vehicles built from July 2007 (as required by law)
  • Central valve version suitable for ABS
  • Compact design – ideal for installation in small spaces
  • Reduced weight – by roughly 20% compared to conventional central valve technology
  • Fewer components – almost half as many as compared to conventional technologies
  • Modular system – diameters from 14.29 to 31.75mm and strokes up to 46mm
  • Low volume uptake – minimized elastic deformations due to smaller seals
  • Sealing cups supported in the housing – robustness against soiling and wear; longer life
  • Cr6-free surfaces for vehicles built from July 2007 (as required by law)
See More

TRW – Brake Master Cylinde (Part No.N30001674468TRW)

Brake Master Cylinde

from

$476.24
TRW Automotive supplies master cylinder brake actuation systems featuring quality and performance. TRW’s master cylinder product portfolio covers a wide range of vehicles, from small cars up to truck and SUV platforms. These systems can offer lighter weight, with options such as micro master cylinders and aluminum master cylinders through to heavy-duty master cylinders designed for the durability and variable loading conditions of the light-truck market. These systems function with the help of a series of brake fluid sensors, which are located on the reservoir tank. This series includes vacuum sensors, brake light switches, and travel sensors.

Product Features:
  • Low volume uptake
  • High efficiency
  • Low pressure differential between primary and secondary circuits
  • Good bleedability
  • Cr6-free surfaces for vehicles built from July 2007 (as required by law)
  • Central valve version suitable for ABS
See More

ATE – Disc Brake Hardware Kit (Part No.N1061237984ATE)

Disc Brake Hardware Kit

from

$59.10
The ATE disc brake hardware kits provide everything you need to perform a complete the brake job and restore the brake system back to the optimal operating condition.

Product Features:
  • Reduced Brake Noise, comebacks and unsatisfied customers,
  • Extends the life of a brake job,
  • Improved fuel mileage, and
  • Restores brakes to like new Performance. Effects of Corrosion, Heat, Stress, Use Rust and Corrosion on floating caliper slides or bushings can prevent the caliper from centering properly, which can
  • reduce effective braking force
  • cause uneven pad wear, and brake noise. Rubber Bushings lose there resiliency and become flattened from the torque of the braking system which can
  • cause excessive caliper movement
  • cause unwanted noise like rattles and thumps. New Hardware = Back to like-new performance
See More

ATE – Disc Brake Hardware Kit (Part No.N106149796ATE)

Disc Brake Hardware Kit

from

$66.41
The ATE disc brake hardware kits provide everything you need to perform a complete the brake job and restore the brake system back to the optimal operating condition.

Product Features:
  • Reduced Brake Noise, comebacks and unsatisfied customers,
  • Extends the life of a brake job,
  • Improved fuel mileage, and
  • Restores brakes to like new Performance. Effects of Corrosion, Heat, Stress, Use Rust and Corrosion on floating caliper slides or bushings can prevent the caliper from centering properly, which can
  • reduce effective braking force
  • cause uneven pad wear, and brake noise. Rubber Bushings lose there resiliency and become flattened from the torque of the braking system which can
  • cause excessive caliper movement
  • cause unwanted noise like rattles and thumps. New Hardware = Back to like-new performance
See More

ATE – Disc Brake Hardware Kit (Part No.N106149797ATE)

Disc Brake Hardware Kit

from

$61.25
The ATE disc brake hardware kits provide everything you need to perform a complete the brake job and restore the brake system back to the optimal operating condition.

Product Features:
  • Reduced Brake Noise, comebacks and unsatisfied customers,
  • Extends the life of a brake job,
  • Improved fuel mileage, and
  • Restores brakes to like new Performance. Effects of Corrosion, Heat, Stress, Use Rust and Corrosion on floating caliper slides or bushings can prevent the caliper from centering properly, which can
  • reduce effective braking force
  • cause uneven pad wear, and brake noise. Rubber Bushings lose there resiliency and become flattened from the torque of the braking system which can
  • cause excessive caliper movement
  • cause unwanted noise like rattles and thumps. New Hardware = Back to like-new performance
See More

Original Equipment – Parking Brake Shoe (Part No.N500028310OEA)

Parking Brake Shoe

from

$42.96
Parking Brake Shoe

Carquest Wearever – Parking Brake Shoes (Part No.S816)

Parking Brake Shoes

from

$29.99
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:
  • Wearever Brake Shoes come bonded or riveted based on OE design.
  • Wearever Brake Shoes are coated to prevent rust.
  • Wearever Brake Shoes are 100% New not remanufactured.
  • Brand may vary by location
See More

ATE – Brake Caliper Repair Kit (Part No.N105082725ATE)

Brake Caliper Repair Kit

from

$55.53
ATE Disc Brake Caliper Repair Kit contains the components necessary for piston seal repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.

Product Features:
  • Guaranteed factory fit to original equipment specifications
  • Meets or exceeds original equipment factory safety standards
See More

ATE – Brake Caliper Repair Kit (Part No.N105022429ATE)

Brake Caliper Repair Kit

from

$28.46
ATE Disc Brake Caliper Repair Kit contains the components necessary for piston seal repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.

Product Features:
  • Guaranteed factory fit to original equipment specifications
  • Meets or exceeds original equipment factory safety standards
See More

FTE – Brake Caliper Repair Kit (Part No.N105022650FTE)

Brake Caliper Repair Kit

from

$24.30
FTE Disc Brake Caliper Repair Kit contains the components necessary for repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.

Product Features:
  • Guaranteed factory fit to original equipment specifications
  • Meets or exceeds original equipment factory safety standards
See More

Carquest Premium Gold – Semi-Metallic Brake Pads – Front (4-Pad Set) (Part No.GMKD1389)

Semi-Metallic Brake Pads - Front (4-Pad Set)

from

$53.99
Carquest Wearever Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.

Product Features:
  • Application-specific formulations designed for extended pad life and clean wheels
  • Multi-layer shim for near silent braking
  • OE designed slots and chamfers for consistent performance
  • Hardware included on popular and late-model applications
See More

PowerStop – Z16 Low-Dust Ceramic Brake Pads (Part No.16-1905)

Z16 Low-Dust Ceramic Brake Pads

from

$59.99
The Power Stop Z16 Evolution ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z16 pads maintain consistent wear and performance while ensuring a fast break-in. The Z16 Evolution ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:
  • Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
  • Positive mold technology for consistent wear and performance
  • Thermal scorched pad surface for a fast break-in
  • Chamfered and slotted to ensure noise-free braking
  • Powder coated backing plate resists rust and corrosion to provide extended pad life
  • Multi-Layer rubberized shims provide virtually noise-free braking
See More

PowerStop – Z17 Evolution Ceramic Brake Pads with Hardware (Part No.17-1389)

Z17 Evolution Ceramic Brake Pads with Hardware

from

$61.99
The Z17 Evolution Ceramic Brake Pad and Hardware set is a stock replacement brake pad set for your daily driven vehicle. The ceramic pads’ low-dust formula is validated through on-vehicle 3rd party tests in the USA to keep your wheels looking like new. The pads also feature dual-layer high-temperature rubberized shims that insulate noise for virtually silent braking. If you’re looking to refresh the look and braking performance of your old, worn-out brakes, look no further. Say hello to a smooth, quiet commute with Z17 Evolution Ceramic Brake Pads.

Product Features:
  • PowerStop Z17 Evolution Clean Ride Ceramic brake pads are engineered for noise free braking
  • Z17 Evolution brake pads are manufactured under TS16949 standards to OEM specifications including chamfers and slots
  • The pad surfaces are thermal scorched for fast break-in
  • Includes premium stainless-steel hardware for hassle free installation
  • Multi-Layer rubberized shims provide virtually noise-free braking
  • Includes Premium stainless-steel hardware for easy installation
See More

ATE – Original Brake Caliper, New – Friction Ready (Part No.N104022637ATE)

Original Brake Caliper, New - Friction Ready

from

$706.66
100% New Caliper – Manufacturer recommends replacing calipers in pairs. With innovative fixed and floating calipers in aluminum and nodular cast iron, ATE is Europe’s market leader. And there is a good reason for that: during development, ATE simulates operational stresses in terms of braking load, vibration, corrosion and wear in extensive series of trials. This means that every basic safety-relevant function is ensured, the sealing of the hydraulic system as much as the venting function of the piston (roll-back), the return (knock-back) function, or the function of the housing/pad guides. ATE original brake calipers are supplied ready-to-install: rear-axle calipers with handbrake are usually pre-filled and preset. This permits simple and correct bleeding in the vehicle.

Product Features:
  • OE quality direct fit application.
  • Friction Ready
  • Corrosion inhibiting protection
  • Ensures long life and maximum performance
  • Natural exterior finish
See More

ATE – Original Brake Caliper, New – Friction Ready (Part No.N104022639ATE)

Original Brake Caliper, New - Friction Ready

from

$668.69
100% New Caliper – Manufacturer recommends replacing calipers in pairs. With innovative fixed and floating calipers in aluminum and nodular cast iron, ATE is Europe’s market leader. And there is a good reason for that: during development, ATE simulates operational stresses in terms of braking load, vibration, corrosion and wear in extensive series of trials. This means that every basic safety-relevant function is ensured, the sealing of the hydraulic system as much as the venting function of the piston (roll-back), the return (knock-back) function, or the function of the housing/pad guides. ATE original brake calipers are supplied ready-to-install: rear-axle calipers with handbrake are usually pre-filled and preset. This permits simple and correct bleeding in the vehicle.

Product Features:
  • OE quality direct fit application.
  • Friction Ready
  • Corrosion inhibiting protection
  • Ensures long life and maximum performance
  • Natural exterior finish
See More

ATE – Original Brake Caliper, New – Friction Ready (Part No.N104022642ATE)

Original Brake Caliper, New - Friction Ready

from

$674.06
100% New Caliper – Manufacturer recommends replacing calipers in pairs. With innovative fixed and floating calipers in aluminum and nodular cast iron, ATE is Europe’s market leader. And there is a good reason for that: during development, ATE simulates operational stresses in terms of braking load, vibration, corrosion and wear in extensive series of trials. This means that every basic safety-relevant function is ensured, the sealing of the hydraulic system as much as the venting function of the piston (roll-back), the return (knock-back) function, or the function of the housing/pad guides. ATE original brake calipers are supplied ready-to-install: rear-axle calipers with handbrake are usually pre-filled and preset. This permits simple and correct bleeding in the vehicle.

Product Features:
  • OE quality direct fit application.
  • Friction Ready
  • Corrosion inhibiting protection
  • Ensures long life and maximum performance
  • Natural exterior finish
See More

ATE – Original Brake Caliper, New – Friction Ready (Part No.N104022641ATE)

Original Brake Caliper, New - Friction Ready

from

$634.16
100% New Caliper – Manufacturer recommends replacing calipers in pairs. With innovative fixed and floating calipers in aluminum and nodular cast iron, ATE is Europe’s market leader. And there is a good reason for that: during development, ATE simulates operational stresses in terms of braking load, vibration, corrosion and wear in extensive series of trials. This means that every basic safety-relevant function is ensured, the sealing of the hydraulic system as much as the venting function of the piston (roll-back), the return (knock-back) function, or the function of the housing/pad guides. ATE original brake calipers are supplied ready-to-install: rear-axle calipers with handbrake are usually pre-filled and preset. This permits simple and correct bleeding in the vehicle.

Product Features:
  • OE quality direct fit application.
  • Friction Ready
  • Corrosion inhibiting protection
  • Ensures long life and maximum performance
  • Natural exterior finish
See More

Upgrade your 1977 Porsche 911 with Top-Quality Brake Parts

When it comes to maintaining or upgrading your 1977 Porsche 911, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Porsche or enhancing its overall performance, Brake Parts are key to keeping your 911 functioning at its best. At Advance Auto Parts, we offer a wide selection of 22 Brake Parts for the 1977 Porsche 911, designed to meet your needs without breaking the bank. From Brake Pads and Shoe replacements to Parking Brakes upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Brake Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Brake Parts for your 1977 Porsche 911 at great prices. Our Brake Parts inventory for this model ranges from just $1.50 to $706.66, with an average price of $178.01. Our 22 Brake Parts in stock come from 10 trusted brands, so you’re sure to find the right part for your 1977 Porsche 911 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1977 Porsche 911, we stock popular OEM and aftermarket Brake Parts from top names like Carquest Premium, and more. Carquest Premium Brake Parts start at just $43.99 and boast an impressive 4 stars average rating from customers. With 40 customer reviews and counting, our 1977 Porsche 911 Brake Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Brake Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1977 Porsche 911 is always ready to roll. We’re committed to providing you with everything you need to keep your 911 in top shape, all in one place. Start shopping confidently below for your 1977 Porsche 911!

Best-Selling Brake Pads and Shoes for 1977 Porsche 911s

Enhance the driving experience in your Porsche with 3 quality Brake Pads and Shoe components, starting at $36.27.

Carquest Premium Gold – Brake Pads: Ceramic, Long Life and Quiet (Part No.GNAD31)

Brake Pads: Ceramic, Long Life and Quiet

from

$43.99
Carquest Premium Gold brake pads are original equipment (O.E.) replacement brake pads designed for consistent, quiet and clean braking. Our brake pads are engineered by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium Gold brake pads utilize application-specific friction formulations that provide extended pad life and cleaner wheels. These brake pads also feature OE-designed slots and chamfers for consistent performance. To prevent noise, our Carquest Premium Gold brake pads also utilize a multi-layer shim and are supplied with new brake hardware (most applications-see fitment notes). Carquest Premium Gold brake pads are the best choice when looking for brake pads that meet or exceed the OE stopping performance.

Product Features:
  • Application-specific friction formulations provide shorter stopping distances and extended pad life
  • Hardware included for most applications
  • OE-designed slots and chamfers to reduce noise and vibration
  • Multi-layer shim provides near silent braking
  • Powder-coated backing plate prevents corrosion
See More

Bosch – QuietCast Premium Brake Pads – w/ Hardware and Shims (Part No.N1010441059BOS)

QuietCast Premium Brake Pads - w/ Hardware and Shims

from

$72.78
Bosch QuietCast Premium raises aftermarket brake pad technology to a whole new level. Employing the industry’s best pre-attached, rubber core shims and Molded Shim Technology (on selected applications), QuietCast delivers the quiet operation you and your customers expect with the durability and long life that are the hallmarks of all Bosch products. Every Bosch QuietCast Disc Brake Pad is fitted with the industry’s best pre-attached rubber core shim. This shim style is the most predominant type used by OE manufacturers and is exclusively offered by Bosch for the independent aftermarket.

Product Features:
  • OE-Equivalent and Direct Fit application.
  • OE style rubber-core shims
  • Advanced, platform-specific Semi Metallic formulation
  • Dedicated engineers source and rigorously test all friction materials and formulations
  • Manufactured under the same exacting quality standards as OE components and system
  • Powder-coated backing plate
  • Rigorous physical and dynamometer testing
  • Synthetic lubricant in box
  • Pads individually wrapped Bosch Molded Shim Technology (MST)*** (On Select Applications)
  • At the time of pressing, heat, adhesive and pressure mold the multi-layer shim to the backing plate and friction material creating an integrally molded unit.
  • Shim stays attached throughout the life of the pad; won’t walk or slide on the backing plate
  • Provides maximum stability resulting in quieter shim performance over the life of the pad
See More

ATE – Original OE Formuld Brake Pad Set (Part No.N101011985ATE)

Original OE Formuld Brake Pad Set

from

$36.27
ATE Original brake pads provide quality friction just like the OE pads they replace, providing customer-pleasing brake performance. With the best mixture of materials on the market and a production process which emphasizes quality all the way through, original ATE brake pads represent the state-of-the-art. In order to prevent noise during braking, highly effective primary and secondary measures are both used on brake pads. Primary measures act directly on the point of friction. Here, the main issue is optimization of the materials used for the relevant parts. In many cases, ATE uses the most effective variant and the best primary measure for noise suppression in the industry: the intermediate layer or underlayer! On the other hand, secondary measures are intended to prevent the structure-borne sound which is produced from reaching the ear of the driver and pedestrians. Secondary measures can generally be divided into four groups: damping plates, damping foils, paints and greases. ATE works with over 150 different mixtures of friction material to ensure that the optimal result is always achieved for any particular application. The friction materials are always being refined and developed for this purpose. The pad material consists of various components which each fulfill different functions during braking

Product Features:
  • OE engineered brake system technology assures optimum fit and performance
  • Advanced friction vehicle specific formulations
  • Reduced dusting and extend pad life
  • Application matched premium quality friction grade
  • Underlayer design helps reduce noise, vibration and harshness
  • Shims, chamfers, slots, wear sensors and other premium features included Original ATE Brake pads – Presentation
See More

Most Popular 1977 Porsche 911 Parking Brakes

Customize your Porsche with 1 Parking Brakes products like Parking Brake Pads and Shoes, all priced under $42.96.

Original Equipment – Parking Brake Shoe (Part No.N500028310OEA)

Parking Brake Shoe

from

$42.96
Parking Brake Shoe

Top Picks for 1977 Porsche 911 Brake Calipers

Upgrade Porsche 911s with top-quality Brake Calipers parts, including 4 OEM and aftermarket selections for your 1977 model.

ATE – Original Brake Caliper, New – Friction Ready (Part No.N104022637ATE)

Original Brake Caliper, New - Friction Ready

from

$706.66
100% New Caliper – Manufacturer recommends replacing calipers in pairs. With innovative fixed and floating calipers in aluminum and nodular cast iron, ATE is Europe’s market leader. And there is a good reason for that: during development, ATE simulates operational stresses in terms of braking load, vibration, corrosion and wear in extensive series of trials. This means that every basic safety-relevant function is ensured, the sealing of the hydraulic system as much as the venting function of the piston (roll-back), the return (knock-back) function, or the function of the housing/pad guides. ATE original brake calipers are supplied ready-to-install: rear-axle calipers with handbrake are usually pre-filled and preset. This permits simple and correct bleeding in the vehicle.

Product Features:
  • OE quality direct fit application.
  • Friction Ready
  • Corrosion inhibiting protection
  • Ensures long life and maximum performance
  • Natural exterior finish
See More

ATE – Original Brake Caliper, New – Friction Ready (Part No.N104022639ATE)

Original Brake Caliper, New - Friction Ready

from

$668.69
100% New Caliper – Manufacturer recommends replacing calipers in pairs. With innovative fixed and floating calipers in aluminum and nodular cast iron, ATE is Europe’s market leader. And there is a good reason for that: during development, ATE simulates operational stresses in terms of braking load, vibration, corrosion and wear in extensive series of trials. This means that every basic safety-relevant function is ensured, the sealing of the hydraulic system as much as the venting function of the piston (roll-back), the return (knock-back) function, or the function of the housing/pad guides. ATE original brake calipers are supplied ready-to-install: rear-axle calipers with handbrake are usually pre-filled and preset. This permits simple and correct bleeding in the vehicle.

Product Features:
  • OE quality direct fit application.
  • Friction Ready
  • Corrosion inhibiting protection
  • Ensures long life and maximum performance
  • Natural exterior finish
See More

ATE – Original Brake Caliper, New – Friction Ready (Part No.N104022646ATE)

Original Brake Caliper, New - Friction Ready

from

$620.69
100% New Caliper – Manufacturer recommends replacing calipers in pairs. With innovative fixed and floating calipers in aluminum and nodular cast iron, ATE is Europe’s market leader. And there is a good reason for that: during development, ATE simulates operational stresses in terms of braking load, vibration, corrosion and wear in extensive series of trials. This means that every basic safety-relevant function is ensured, the sealing of the hydraulic system as much as the venting function of the piston (roll-back), the return (knock-back) function, or the function of the housing/pad guides. ATE original brake calipers are supplied ready-to-install: rear-axle calipers with handbrake are usually pre-filled and preset. This permits simple and correct bleeding in the vehicle.

Product Features:
  • OE quality direct fit application.
  • Friction Ready
  • Corrosion inhibiting protection
  • Ensures long life and maximum performance
  • Natural exterior finish
See More

ATE – Original Brake Caliper, New – Friction Ready (Part No.N104022647ATE)

Original Brake Caliper, New - Friction Ready

from

$615.12
100% New Caliper – Manufacturer recommends replacing calipers in pairs. With innovative fixed and floating calipers in aluminum and nodular cast iron, ATE is Europe’s market leader. And there is a good reason for that: during development, ATE simulates operational stresses in terms of braking load, vibration, corrosion and wear in extensive series of trials. This means that every basic safety-relevant function is ensured, the sealing of the hydraulic system as much as the venting function of the piston (roll-back), the return (knock-back) function, or the function of the housing/pad guides. ATE original brake calipers are supplied ready-to-install: rear-axle calipers with handbrake are usually pre-filled and preset. This permits simple and correct bleeding in the vehicle.

Product Features:
  • OE quality direct fit application.
  • Friction Ready
  • Corrosion inhibiting protection
  • Ensures long life and maximum performance
  • Natural exterior finish
See More

In-Demand Brake Rotors and Drums for 1977 Porsche 911s

Select from 3 premium Brake Rotors and Drums parts for your 1977 Porsche 911, with prices ranging from $94.94 to $155.71.

Zimmermann – Coat-Z Sport Brake Disc (Rotor) (Part No.N1000670578ZXC)

Coat-Z Sport Brake Disc (Rotor)

from

$155.71
The Zimmermann Sport Brake Disc was developed as a result of experience of brake discs in series-production vehicles in connection with racing. The brake system is optimized by combining high-quality cast materials with a slotted or cross-drilled braking surface. Coat-Z Protective Coating – The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Material quality / high carbon – Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Coat-Z protective anti-corrosion coating
  • Better wet braking performance by permanent expulsion of brake dust and water
  • Sporty look
  • Because of the anti-corrosion protection Coat Z better finish – especially of the hub and the outer diameter
  • Noticeable improvement in the braking power of your car
  • Prevention of brake fade
  • Countersinking of holes doubles up as wear indicator
  • 1:1 exchange of original disc possible
  • No additional adaption necessary
  • Not subject to registration: general ABE certification supplied with disc
See More

Sebro – Coated Brake Rotor (Part No.N100022425SEB)

Coated Brake Rotor

from

$131.08
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.

Product Features:
  • OE-Equivalent and Direct fit Application
  • high carbon content disc
  • Protective coating that resists corrosion
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Improved thermal efficiency
See More

Bosch – QuietCast Premium Brake Disc (Rotor) (Part No.N100020721BOS)

QuietCast Premium Brake Disc (Rotor)

from

$94.94
Bosch rotors utilize innovative materials that ensure the very highest quality – and prevent brake judder, noise, vibration and harshness. Bosch QuietCast Premium Disc Brake Rotors utilize vehicle specific castings. The heat flow casting process produces superior G3000, GG20, GG15 and HC (high carbon) casting. Bosch castings provide strength and durability not found in competitive product. While competitors may provide a low cost product which helps save money, their castings can crack and provide poor durability. Bosch QuietCast provides consistent, safe and long lasting performance. Alutherm 80 Coating – Bi-metal aluminum and zinc clean-look coating/Alutherm 80 extends the life of the rotor and provides a clean look for today’s open wheels

Product Features:
  • OE-Equivalent and a direct fit replacement
  • Prevent rust and corrosion with clear-look coating protection
  • Provide a clean look for today’s open-wheeled vehicles
  • Are 100% balanced for smooth operation
  • Factory-engraved edge code and minimum thickness specifications Bosch QuietCast Brake Rotors Brochure
See More

Most Sold 1977 Porsche 911 Brake Kits

Explore our best-selling Porsche parts for the 1977 911 among 4 OEM and aftermarket options starting from $24.25.

ATE – Disc Brake Hardware Kit (Part No.N106149796ATE)

Disc Brake Hardware Kit

from

$66.41
The ATE disc brake hardware kits provide everything you need to perform a complete the brake job and restore the brake system back to the optimal operating condition.

Product Features:
  • Reduced Brake Noise, comebacks and unsatisfied customers,
  • Extends the life of a brake job,
  • Improved fuel mileage, and
  • Restores brakes to like new Performance. Effects of Corrosion, Heat, Stress, Use Rust and Corrosion on floating caliper slides or bushings can prevent the caliper from centering properly, which can
  • reduce effective braking force
  • cause uneven pad wear, and brake noise. Rubber Bushings lose there resiliency and become flattened from the torque of the braking system which can
  • cause excessive caliper movement
  • cause unwanted noise like rattles and thumps. New Hardware = Back to like-new performance
See More

ATE – Brake Caliper Repair Kit (Part No.N105082725ATE)

Brake Caliper Repair Kit

from

$55.53
ATE Disc Brake Caliper Repair Kit contains the components necessary for piston seal repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.

Product Features:
  • Guaranteed factory fit to original equipment specifications
  • Meets or exceeds original equipment factory safety standards
See More

FTE – Brake Caliper Repair Kit (Part No.N105022650FTE)

Brake Caliper Repair Kit

from

$24.30
FTE Disc Brake Caliper Repair Kit contains the components necessary for repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.

Product Features:
  • Guaranteed factory fit to original equipment specifications
  • Meets or exceeds original equipment factory safety standards
See More

FTE – Brake Caliper Repair Kit (Part No.N105022644FTE)

Brake Caliper Repair Kit

from

$24.25
FTE Disc Brake Caliper Repair Kit contains the components necessary for repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.

Product Features:
  • Guaranteed factory fit to original equipment specifications
  • Meets or exceeds original equipment factory safety standards
See More

Top-Rated Brake Parts Brands For Your 1977 Porsche 911

Shop for the best-rated brands offering Brake Parts and other products for your 1977 Porsche 911s. Below you’ll find some of our best rated Brake Parts from Carquest Premium, and more. Brake Parts from these brands that fit a 1977 911 start at just $43.99 and are rated as high as 4 stars. OEM and aftermarket Brake Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest Premium 1977 Porsche 911 Brake Parts

When it comes to maintaining or upgrading your 1977 Porsche 911, using quality Brake Parts is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Brake Parts, specifically designed for the 1977 Porsche 911. With over 1 Carquest Premium brand Brake Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $43.99. Plus, with over 20 customer reviews and an average rating of 4 stars, you can trust that our Carquest Premium Brake Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Brake Pads: Ceramic, Long Life and Quiet
from
$43.99

(20)

Brake Pads: Ceramic, Long Life and Quiet

“I do a lot of stop and go driving. These pads have not squealed once and the brake pedal seams a little firmer, but this could be because I also repla”

FAQs for 1977 Porsche 911 Brake Parts

Which Brake Parts are best-sellers for 1977 Porsche 911s?

Out of 22 Brake Parts that fit 1977 Porsche 911s, the following parts are the top sellers:

What’s the price range for 1977 Porsche 911 Brake Parts?

Brake Part prices for the 1977 Porsche 911 start at $1.50 and go up to $706.66 for the most premium parts.

What’s the average price of a Brake Part for a 1977 Porsche 911?

The average price for Brake Parts for the 1977 Porsche 911 is $178.01. Keep in mind the variety of part types within our Brake Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Brake Parts for other Porsche 911 model years?

Yes, we currently carry Brake Parts for 59 model years of Porsche 911s between 1965 and 2024. Brake Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Brake Parts for my 1977 Porsche 911?

The cheapest 1977 Porsche 911 Brake Parts we carry in stock are:

What are the top-rated Brake Parts that fit the 1977 Porsche 911?

Out of 40 reviews by customers, our 1977 Porsche 911 Brake Parts have an average customer rating of . These are some of the highest-rated Brake Part types for the 1977 Porsche 911 and their top-rated products:

What types of Brake Parts do you sell for my 1977 Porsche 911?

As of 2/5/25, these are some of the most in-demand types of Brake Parts for a 1977 Porsche 911:

Can I get help with 1977 Porsche 911 Brake Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Porsche Brake Parts and more.

What is your return policy for Porsche 911 Brake Parts?

Advance Auto Parts keeps returns simple. For new Porsche 911 Brake Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.