1977 Oldsmobile Cutlass Exhaust Parts
Find Your Specific 1977 Oldsmobile Cutlass Exhaust Parts
Below you will find various in-demand Oldsmobile Exhaust Parts, components and accessories for your 1977 Cutlass. Advance Auto Parts has popular Cutlass parts like Exhaust Mufflers, Exhaust Hangers, Exhaust Gaskets and more. You’ll also find aftermarket and OEM Exhaust Parts for other Cutlass model years including
1979,
1980,
1981,
1982,
1983,
1988,
1997,
1998,
1999 and more. Select a category of 1977 Oldsmobile Cutlass Exhaust Parts below and start saving instantly.
Popular 1977 Oldsmobile Cutlass Exhaust Parts Categories
Essential Exhaust Parts for 1977 Oldsmobile Cutlasses
Hooker Headers – Mufflers (Part No.21644HKR)
from
$147.99
Mufflers
Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.942446)
from
$137.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.42441)
from
$101.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Taylor Gaskets – Header Gasket (Part No.66088)
from
$29.99
Header Gasket
Mr. Gasket – Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal (Part No.7401G)
from
$47.99
Upgrade to Mr. Gasket Aluminum Layered Header Gaskets and eliminate blown exhaust gaskets forever. They conform to warped and damaged surfaces to create an airtight, leak-proof seal and will not shrink or deteriorate EVER.
Product Features:
See More
Product Features:
- Withstands Intense Exhaust Heat
- Reusable header, exhaust manifold and collector flange gaskets
- Resists Deteriorating
- Manufactured from “dead soft” aluminum layers – .125″ thick
- Easy Removal For Disassembly
- Conforms easily to surface irregularities (warped flanges)
- Compresses down to 0.060″ to create a tight leak-proof seal
- Will not shrink, deteriorate, or blow out- eliminating gasket leaks
- For high performance street, drag race and oval track use
Mr. Gasket – Exhsthdrgskt (Part No.7652G)
from
$59.99
Header Installation Kit – Chevrolet V8 1955-1991 265-400 Oval Port. Includes gaskets and fasteners necessary for header installation. Made using premium Ultra-Seal exhaust and collector gaskets. Mr. Gasket header and collector bolts deliver necessary clamp-load to seal flange mating surfaces.
Product Features:
See More
Product Features:
- Oval Port Header Gaskets
- Port Size 1.50″ x 1.82″
- Collector Gasket 3.00″ Diam. 3-bolt Style
- Includes Header & Collector Bolts
Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)
from
$93.99Product Features:
- Show Quality Chrome Platinum
- Durable Black Finish
- Can Be Welded Or Clamped
- Complete The System
- Glass-Packed Resonators
Walker – Exhaust System Hanger Insulator (Part No.35182)
from
$5.49
Complete your exhaust repair with Walker insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.
Product Features:
See More
Product Features:
- OE DESIGN – Designed with OE-style features for easy installation and fit
- PREMIUM MATERIALS – Made from high-quality materials for durability and long life
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE – Designed to support undercar exhaust components
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust System Hanger Insulator (Part No.35462)
from
$14.29
Complete your exhaust repair with Walker insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.
Product Features:
See More
Product Features:
- OE DESIGN – Designed with OE-style features for easy installation and fit
- PREMIUM MATERIALS – Made from high-quality materials for durability and long life
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE – Designed to support undercar exhaust components
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust System Hanger Insulator (Part No.35719)
from
$15.29
Complete your exhaust repair with Walker insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.
Product Features:
See More
Product Features:
- OE DESIGN – Designed with OE-style features for easy installation and fit
- PREMIUM MATERIALS – Made from high-quality materials for durability and long life
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE – Designed to support undercar exhaust components
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Flowtech – Ceramic Header (Part No.31108FLT)
from
$511.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Ceramic Headers
- Rust And Corrosion Resistance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Hooker Headers – ExhstHdr (Part No.2105-3HKR)
from
$1249.99
ExhstHdr
Hooker BlackHeart – Hooker BlackHeart LS Swap Exhaust Manifolds – Stainless Steel – Natural Cast (Part No.8503HKR)
from
$674.99
Product Features:
See More
- 2.5-inch outlet diameter offers improved flow for maximum performance from a cast exhaust manifold
- Tight tuck design provides universal fit for most popular chassis and a clean traditional muscle car appearance
- Intended for GM LS engine swap applications where durability, quiet operation, and leak-free sealing is desired
- Plain as-cast finish for a factory appearance. Also available in polished.
- Nickel plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware included
- Stainless Steel construction to provide unmatched durability and corrosion resistance
- Perfect complement to Hooker engine swap mount plates and Holley engine swap oil pans
Walker – Exhaust Bolt and Spring (Part No.36463)
from
$19.99
Complete your exhaust repair with a Walker spring bolt kit. Designed to ensure a tight connection and inhibit leaks, Walker hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE – Designed to support undercar exhaust components
- CONSISTENT PERFORMANCE – Spring designed with the right compression strength for a secure connection
- PREMIUM MATERIALS – Made from high-quality materials for durability and long life
- THE RIGHT CONNECTION – Designed to be used for ball and socket joint
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35337)
from
$8.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35335)
from
$2.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35336)
from
$2.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
MagnaFlow – Direct-Fit HM Grade Federal / EPA Compliant Catalytic Converter (Part No.23520)
from
$420.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23520. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 23520 includes (1) Crush Ring Gasket, (1) Flange Gasket. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Durable 308 stainless steel MIG welds
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
Walker – CalCat CARB Universal Catalytic Converter, 2.5" Inlet (ID) 2.5"Outlet (ID) (Part No.81328)
from
$396.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker® CalCat® Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- BUY WITH CONFIDENCE — Backed by Walker’s emissionsáandástructural integrity warranty.áVisit Walkerexhaust.com for details
Walker – Standard EPA Universal Catalytic Converter – 2" Inlet (ID) 2" Outlet (ID) (Part No.15031)
from
$131.99
Product Features:
See More
- EPA COMPLIANT – For use on pre-OBDII vehicles, 1995 and older. Not legal for sale or use in CA, CO and NY. Legal in ME on all pre-OBD vehicles only. Consult your state’s aftermarket converter regulations for details.
- NO BREAK IN REQUIRED – Ready to operate with application-specific converter shell design and mat compression, no converter break in required after installation
- DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
- OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
- BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.
MagnaFlow – Universal California Grade CARB Compliant Catalytic Converter (Part No.418005)
from
$438.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 418005. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
MagnaFlow – Universal California Grade CARB Compliant Catalytic Converter (Part No.3322305)
from
$561.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 3322305. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
Walker – Exhaust Flange (Part No.31886)
from
$20.99
Complete your exhaust repair with Walker flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE – Designed to support undercar exhaust components
- OE-STYLE DESIGN – Designed with OE-style features for easy installation
- QUALITY MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Flange (Part No.31865)
from
$15.49
Complete your exhaust repair with Walker flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE – Designed to support undercar exhaust components
- OE-STYLE DESIGN – Designed with OE-style features for easy installation
- QUALITY MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Flange (Part No.31900)
from
$11.99
Complete your exhaust repair with Walker flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE – Designed to support undercar exhaust components
- OE-STYLE DESIGN – Designed with OE-style features for easy installation
- QUALITY MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Flange (Part No.31882)
from
$17.49
Complete your exhaust repair with Walker flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE – Designed to support undercar exhaust components
- OE-STYLE DESIGN – Designed with OE-style features for easy installation
- QUALITY MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Upgrade your 1977 Oldsmobile Cutlass with Top-Quality Exhaust Parts
When it comes to maintaining or upgrading your 1977 Oldsmobile Cutlass, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Oldsmobile or enhancing its overall performance, Exhaust Parts are key to keeping your Cutlass functioning at its best. At Advance Auto Parts, we offer a wide selection of 22 Exhaust Parts for the 1977 Oldsmobile Cutlass, designed to meet your needs without breaking the bank.
From
Exhaust Muffler
replacements to
Exhaust Hangers
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 1977 Oldsmobile Cutlass at great prices.
Our Exhaust Parts inventory for this model
ranges from just $2.99 to $562.99, with
an average price of $184.49.
Our 22 Exhaust Parts in stock come from 7 trusted brands, so you’re sure to find the right part for your 1977 Oldsmobile Cutlass without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1977 Oldsmobile Cutlass, we stock popular OEM and aftermarket Exhaust Parts from top names
like Felpro, Flowmaster Inc., Walker, and more.
Felpro Exhaust Parts
start at just $12.79 and boast an impressive 4.6 stars average rating from customers.
Flowmaster Inc. and Walker also bring quality to the table, with Exhaust Parts available starting at $19.99, and at an average 4.4 stars rating.
With 158 customer reviews and counting, our 1977 Oldsmobile Cutlass Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1977 Oldsmobile Cutlass is always ready to roll. We’re committed to providing you with everything you need to keep your Cutlass in top shape, all in one place.
Start shopping confidently below for your 1977 Oldsmobile Cutlass!
Best-Selling Exhaust Mufflers for 1977 Oldsmobile Cutlasses
Enhance the driving experience in your Oldsmobile with 5 quality Exhaust Muffler components, starting at $62.99.
Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.942446)
from
$137.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Walker – Sound Solution Exhaust Muffler (Part No.18759)
from
$62.99
Sound Solution mufflers are engineered with 100% aluminized steel for longer service life compared to low carbon steel. These mufflers have mechanical interior joints for durability, And spun-locked heads for resistance to rupture from backfires. Sound Solution mufflers are available in a universal fitment style, with both quality appearance And favorable acoustics.
See More
Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.42441)
from
$101.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.8042441)
from
$135.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – Flowmaster Flow FX Muffler (Part No.71225)
from
$78.99
Flowmaster’s Flow FX series mufflers deliver a moderate performance tone for the enthusiast looking for an exhaust note that is different from the “chambered” muffler sound. The interior features a large 3.00-inch “straight-through” stainless steel perforated core, surrounded with high-temperature sound absorption materials delivering a deep traditional mellow tone. The internal flow design is reversible, so the muffler can be installed in either direction to best suit the vehicle application and offsets needed. Features include fully MIG-welded “bright” 409 stainless steel construction with the Flow FX logo embossed on both sides of the case. The Flow FX line of mufflers is perfect for the person looking for a show quality performance muffler at an economical price point and in a compact sized case.
Product Features:
See More
Product Features:
- Flowmaster quality
- Straight through design
- Moderate exterior performance tone
- Durable fully welded 409S stainless steel case
Most Popular 1977 Oldsmobile Cutlass Exhaust Hangers
Customize your Oldsmobile with 1 Exhaust Hangers products
like Exhaust System Insulators, all
priced under $5.49.
Walker – Exhaust System Hanger Insulator (Part No.35182)
from
$5.49
Complete your exhaust repair with Walker insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.
Product Features:
See More
Product Features:
- OE DESIGN – Designed with OE-style features for easy installation and fit
- PREMIUM MATERIALS – Made from high-quality materials for durability and long life
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE – Designed to support undercar exhaust components
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Top Picks for 1977 Oldsmobile Cutlass Exhaust Gaskets
Upgrade Oldsmobile Cutlasses with top-quality Exhaust Gaskets parts, including 2 OEM and aftermarket selections for your 1977 model.
Felpro – Exhaust Manifold Gasket Set (Part No.MS 90021)
from
$12.79
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5945)
from
$45.49
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Has A Steel Core With Graphite Facing
- Graphite Facing Has Excellent Thermo-conductivity
- High Recovery Mat Allows For Better Seal Retention
- Can Be Trimmed For Port Modifications
In-Demand Exhaust Fittings for 1977 Oldsmobile Cutlasses
Select from 4 premium Exhaust Fittings parts for your 1977 Oldsmobile Cutlass, with prices ranging from $2.99 to $15.49.
Walker – Exhaust Flange (Part No.31865)
from
$15.49
Complete your exhaust repair with Walker flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE – Designed to support undercar exhaust components
- OE-STYLE DESIGN – Designed with OE-style features for easy installation
- QUALITY MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35337)
from
$8.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35336)
from
$2.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35335)
from
$2.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Most Sold 1977 Oldsmobile Cutlass Exhaust Manifold and Headers
Explore our best-selling Oldsmobile parts for the 1977 Cutlass among 2 OEM and aftermarket options starting from $479.99.
Flowtech – Ceramic Header (Part No.31150FLT)
from
$562.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Ceramic Headers
- Rust And Corrosion Resistance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Hooker Headers – Competition Header (Part No.3901HKR)
from
$479.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- High Performance
- Affordable
- Durable 16 Gauge Material
- Welds Easier
- Lasts Longer
- Heat Cured
- High Heat Resistant
Top-Rated Exhaust Parts Brands For Your 1977 Oldsmobile Cutlass
Shop for the best-rated brands offering Exhaust Parts and other products for your 1977 Oldsmobile Cutlasses. Below you’ll find some of our best rated Exhaust Parts from Felpro, Flowmaster Inc., and Walker, and more. Exhaust Parts from these brands that fit a 1977 Cutlass start at just $12.79 and are rated as high as 4.6 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Felpro 1977 Oldsmobile Cutlass Exhaust Parts
When it comes to maintaining or upgrading your 1977 Oldsmobile Cutlass, using quality Exhaust Parts is essential to ensure durability and a perfect fit. Felpro ticks all of those boxes. We offer a wide selection of Felpro Exhaust Parts, specifically designed for the 1977 Oldsmobile Cutlass. With over 1 Felpro brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $12.79. Plus, with over 1 customer reviews and an average rating of 4.6 stars, you can trust that our Felpro Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Flowmaster Inc. 1977 Oldsmobile Cutlass Exhaust Parts
Flowmaster Inc. auto parts is one of the highest quality Exhaust Part brands in the market. Any 1977 Oldsmobile Cutlass owner should feel confident when installing genuine Flowmaster Inc. parts in their vehicle. To ensure the best fit and performance for your 1977 Cutlass, Advance Auto Parts carries a full inventory of 1 Flowmaster Inc. Exhaust Parts. Plus you will be keeping your Oldsmobile in peak condition while saving money because prices on these Flowmaster Inc. Exhaust Parts range up to $137.99, plus, with more than 3 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Exhaust Parts below will deliver on both quality and value.
from
$137.99
(3)
Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound
“Very good deep sound! I only have a 4 cylinder 2000 Mitsubishi eclipse but you couldn’t even tell. It sounds great!”
FAQs for 1977 Oldsmobile Cutlass Exhaust Parts
Which Exhaust Parts are best-sellers for 1977 Oldsmobile Cutlasses?
Out of 22 Exhaust Parts that fit 1977 Oldsmobile Cutlasses, the following parts are the top sellers:
- Exhaust Bolt and Spring (10044670) – $19.99
- Sound Solution Exhaust Muffler (5387051) – $62.99
- 40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (16120040) – $101.99
What’s the price range for 1977 Oldsmobile Cutlass Exhaust Parts?
Exhaust Part prices for the 1977 Oldsmobile Cutlass start at $2.99 and go up to $562.99 for the most premium parts.
What’s the average price of a Exhaust Part for a 1977 Oldsmobile Cutlass?
The average price for Exhaust Parts for the 1977 Oldsmobile Cutlass is $184.49. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Exhaust Parts for other Oldsmobile Cutlass model years?
What are the cheapest Exhaust Parts for my 1977 Oldsmobile Cutlass?
The cheapest 1977 Oldsmobile Cutlass Exhaust Parts we carry in stock are:
- Exhaust Clamp (11012137) – $2.99
- Exhaust Clamp (11012223) – $2.99
- Exhaust System Hanger Insulator (18370314) – $5.49
- Exhaust Clamp (11012146) – $8.99
- Exhaust Manifold Gasket Set (5186285) – $12.79
What are the top-rated Exhaust Parts that fit the 1977 Oldsmobile Cutlass?
Out of 158 reviews by customers, our 1977 Oldsmobile Cutlass Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 1977 Oldsmobile Cutlass and their top-rated products:
- Exhaust Gaskets
- Exhaust Manifold Gasket Set (5186285) – $12.79
- Exhaust Tips
- Exhaust Manifold Gasket Set (5186285) – $12.79
What types of Exhaust Parts do you sell for my 1977 Oldsmobile Cutlass?
As of 3/1/26, these are some of the most in-demand types of Exhaust Parts for a 1977 Oldsmobile Cutlass:
Can I get help with 1977 Oldsmobile Cutlass Exhaust Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Oldsmobile Exhaust Parts and more.
What is your return policy for Oldsmobile Cutlass Exhaust Parts?
Advance Auto Parts keeps returns simple. For new Oldsmobile Cutlass Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
