1977 Mercury Comet Differentials

Essential 1977 Mercury Comet Differentials

Yukon Gear – Master Overhaul Kit For Ford 8" Differential With HD Pinion Support (Part No.14049)

Master Overhaul Kit For Ford 8" Differential With HD Pinion Support

from

$297.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:
  • Fits Ford 8″ with Daytona pinion support
  • Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, pilot bearing, thread locker, marking compound with brush, and gasket.
See More

Yukon Gear – Trac Loc Spring Plate For Ford 9" & 8" (Part No.33517)

Trac Loc Spring Plate For Ford 9" & 8"

from

$10.99
Product Features:
  • Trac Loc spring plate for Ford 8″ and 9″
See More

Yukon Gear – Crush Sleeve Eliminator Kit For Ford 9" For 35 Spline Pinion (Part No.55042)

Crush Sleeve Eliminator Kit For Ford 9" For 35 Spline Pinion

from

$175.99
9″ large solid pinion preload spacer & shim kit for 35 spline pinion.

Product Features:
  • Crush sleeve eliminator kit for Ford 9″ with 35 spline pinion
See More

Yukon Gear – One (1) Specialty Bearing Race To Adapt Small Bearing Journal Into A 3.250" Dropout (Part No.32157)

One (1) Specialty Bearing Race To Adapt Small Bearing Journal Into A 3.250" Dropout

from

$51.99
One (1) specialty bearing race to adapt small bearing journal into a 3.250″ dropout. This adapter allows the use of a 28 or 31 spline carrier, positraction or locker in a 3.250″ dropout. This is a perfect solution if you are currently running 28 or 31 spline axles but are looking to upgrade to 35 spline later, or are stepping down from 35 spline but don’t want to buy a new dropout.

Product Features:
  • Carrier race
  • Fits Ford 9″
  • Conversion race to install small bearing carrier into 3.250″ dropout
See More

Motive Gear – Differential Gear Install Kit (Part No.F9IKN)

Differential Gear Install Kit

from

$46.49
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Felpro – Differential Carrier Gasket (Part No.RDS 55074)

Differential Carrier Gasket

from

$8.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)

Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25"

from

$8.99
Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.

Product Features:
  • Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
See More

Motive Gear – Differential Ring and Pinion (Part No.F9-456)

Differential Ring and Pinion

from

$203.99


Product Features:
  • FRD 10BL 9.0 R/P 4.56 MG
See More

Yukon Gear – Pilot Bearing For Ford 8" (Part No.18043)

Pilot Bearing For Ford 8"

from

$40.99
9.25 Chrysler FRONT PINION KIT , 03 & UP DODGE TRUCK .

Product Features:
  • Pilot bearing
  • Fits Ford 8″
See More

National – Bearings (Part No.M86610)

Bearings

from

$9.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – O-Ring For 9" Ford (Part No.30028)

O-Ring For 9" Ford

from

$14.99
O-ring for 9″ Ford.Yukon Mighty seal.

Product Features:
  • Pinion support o-ring
  • Fits Ford 9″
See More

USA Standard Gear – Master Overhaul Kit for the Ford 9" LM603011 Differential (Part No.37036)

Master Overhaul Kit for the Ford 9" LM603011 Differential

from

$226.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits Ford 9″ with LM603011 carrier races
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
See More

Yukon Gear – Pinion Depth Shims For Ford 9" (Part No.55056)

Pinion Depth Shims For Ford 9"

from

$26.99
Pinion depth shim kit 9″ Ford.

Product Features:
  • Pinion depth shims for Ford 9″
See More

Powertrax – Grip PRO Traction System (Part No.GT108028)

Grip PRO Traction System

from

$537.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

Yukon Gear – Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement (Part No.33283)

Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement

from

$5.99
Product Features:
  • Side gear thrust washer for Ford 8″, Ford 9″ and AMC Model 20
  • 0.030″ thick
See More

Yukon Gear – 9" Ford Gasket (Part No.23012)

9" Ford Gasket

from

$11.99
9″ Ford gasket.

Product Features:
  • Dropout gasket
  • Fits Ford 9″
See More

Yukon Gear – Fine Thread Pinion Support Bolt (Aftermarket Aluminum Only) For 9" Ford (Part No.33243)

Fine Thread Pinion Support Bolt (Aftermarket Aluminum Only) For 9" Ford

from

$5.99
Fine thread pinion support bolt (aftermarket aluminum only) for 9″ Ford.

Product Features:
  • Pinion support bolt for Ford 9″
  • 3/8″ x 24 thread
  • 1.5″ long
See More

Yukon Gear – 3.062" Side Adjuster For Ford 9" (Part No.32139)

3.062" Side Adjuster For Ford 9"

from

$94.99
3.062″ side adjuster, Only Fits Yukon Ford 9″ Drop Out, new design ONLY.

Product Features:
  • Side adjuster
  • Fits Ford 9″
  • 3.062″ designs only
See More

Yukon Gear – Adjuster Lock Bolt 3.062" & 3.250" Ford 9" Drop Out (Part No.32149)

Adjuster Lock Bolt 3.062" & 3.250" Ford 9" Drop Out

from

$3.99
Adjuster lock bolt 3.062″ & 3.250″ Yukon Ford 9″ Drop Out.

Product Features:
  • Side adjuster lock bolt
See More

FAG US – TAPERED ROLLER BEARI (Part No.KT45)

TAPERED ROLLER BEARI

from

$24.29
TAPERED ROLLER BEARI

Yukon Gear – Flat Side Gear Without Hub For 9" Ford With 31 Splines (Part No.16162)

Flat Side Gear Without Hub For 9" Ford With 31 Splines

from

$46.99
Flat side gear without hub for 9″ Ford with 31 splines.

Product Features:
  • Side gear without hub
  • Fits Ford 8″ and 9″ Trac Loc positraction with 31 spline axles
See More

Yukon Gear – Trac Loc Clutch Guide For 9" Ford (Part No.33250)

Trac Loc Clutch Guide For 9" Ford

from

$4.99
Trac Loc clutch guide for 9″ Ford.

Product Features:
  • Clutch guide
  • Fits Ford 8″ and 9″
See More

Motive Gear – Differential Mini Spool (Part No.MS9-31)

Differential Mini Spool

from

$31.99


Product Features:
  • MINI SPOOL 8″ & 9″ 31 SPLN STL 090431
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

from

$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
See More

Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4104)

Differential Pinion Solid Spacer Kit w/Shims

from

$10.49


Product Features:
  • SOLID SPACER FORD 8.8″ & 9″
See More

Yukon Gear – Purple Aluminum Pinion Supprt For 9" Ford Daytona (Part No.32161)

Purple Aluminum Pinion Supprt For 9" Ford Daytona

from

$219.99
Product Features:
  • Fits Ford 9″ with 28 spline pinion
  • Larger inner pinion bearing reduces gear deflection under high load
  • 6061 aluminum
  • Annodized purple
  • Does not include races
See More

National – Shaft Repair Sleeve (Part No.99193)

Shaft Repair Sleeve

from

$43.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

1977 Mercury Comet Differentials

Maybe you’re in the middle of a full rebuild of that 1977 Mercury Comet. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 370 different Differentials in our inventory ranging from $1.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1977 Mercury Comet running smoothly.

Differentials are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 1977 Mercury Comet. Driveworks, Yukon Gear, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1977 Mercury Comet, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 51 reviews in this category, some of the top rated parts include Differential Crush Sleeve with 5.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1977 Mercury Comet rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1977 Mercury Comet Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1977 Mercury Comet demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Comet the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Powertrax Differentials

We carry Powertrax parts in our stock across Differential Open Unit and Components categories, plus more. For a 1977 Mercury Comet, our most popular Powertrax Differentials include:
No-Slip Traction System
from $551.99
(1)
No-Slip Traction System
Differential Open Unit and Components

Top 1977 Mercury Comet Differentials from Driveworks

Driveworks products are another trusted brand when it comes to Differentials for your 1977 Mercury Comet. Popular Driveworks parts include:
Tapered Cone/Cup Wheel Bearing Set
from $13.99
(14)
Tapered Cone/Cup Wheel Bearing Set
Front Differential Pinion Bearings

FAQs for 1977 Mercury Comet Differentials

What are the most purchased Differentials for the 1977 Mercury Comet?

Out of 370 Differentials for the 1977 Mercury Comet, the most popular in our inventory are:
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Bearings
from $9.49
This product is not rated
Bearings
Rear Differential Pinion Bearings
Differential Pinion Nut
from $6.49
(1)
Differential Pinion Nut
Differential Pinion Shaft Nuts

What are the top-rated 1977 Mercury Comet Differentials?

Top-rated Differentials for your 1977 Mercury Comet based on customer reviews/ratings are:
Differential Crush Sleeve
from $2.49
(1)
Differential Crush Sleeve
“High quality, would buy again”