1977 Mercury Capri Drivetrains
More 1977 Mercury Capri Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1977 Mercury Capri, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1977 Mercury Capri Drivetrains
Yukon Gear – Pinion Support Bolt For 8" And 9" Ford (Part No.33242)
from
$6.99
Pinion support bolt for 8″ and 9″ Ford.
Product Features:
See More
Product Features:
- Pinion support bolt for Ford 8″ and 9″
- 3/8″ x 24 thread
- 1.0″ long
Motive Gear – Differential Pinion Seal (Part No.3604)
from
$5.79
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o
See More
National – Multi Purpose Seal (Part No.482163N)
from
$5.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)
from
$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil
Yukon Gear – Standard Open & Tracloc Pinion Gear And Thrust Washer For 7.5" Ford (Part No.33296)
from
$10.99
Standard Open & TracLoc pinion gear thrust washer for 7.5″ Ford.
Product Features:
See More
Product Features:
- Pinion gear thrust washer
- Fits Ford 7.5″
Yukon Gear – Axle Seal For 5707 Or 1563 Bearing (Part No.30196)
from
$6.99
Axle seal for 5707 OR 1563 bearing.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Rear axle seal
- 2.250″ O.D.
Yukon Gear – 1310 U/Joint With Zerk Fitting On Cross (Part No.42008)
from
$44.99
Yukon 1310 U/Joint with zerk fitting on cross. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring.
See More
Pro-King – Shim Kit (Part No.741A200)
from
$19.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Sealed Power – Engine Auxiliary Shaft Bearing Set (Part No.1460M)
from
$22.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
USA Standard Gear – Standard Spider Gear Set For Ford 8.8", 31 Spline (Part No.39016)
from
$209.99
Product Features:
See More
- Spider gear kit
- Fits Ford 8.8″ 31 spline open differential
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
Yukon Gear – 8" Ford O-Ring (Part No.30027)
Dorman – Help – Driveshaft Flange Bolts (Part No.80992)
from
$20.29
This drive shaft bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine mount bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this drive shaft bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
National – Bearings (Part No.HM88648)
from
$27.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Bearing Race Driver (Part No.56022)
from
$188.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits M86610 race
- All steel construction
Dorman – Differential Pinion Yoke Assembly (Part No.697-532)
from
$176.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this differential end yoke matches the fit and construction of the original yoke
- Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts
- Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
- Validated fit – this differential end yoke has been tested to confirm accurate fit
Yukon Gear – Bearing Install Kit For Ford 8" Differential (Part No.11040)
from
$255.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.
Product Features:
See More
Product Features:
- Fits Ford 8″
- Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve , oil baffles and slingers , marking compound and brush.
Yukon Gear – Minor Install Kit For Ford 8" Differential (Part No.12034)
from
$74.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.
Product Features:
See More
Product Features:
- Fits Ford 8″
- Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
Motive Gear – Differential Crush Sleeve (Part No.B7A4662A)
from
$3.29
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More
Yukon Gear – Ford 7.5" & 8.8" Ring Gear Bolt, Standard Open & Tracloc (Part No.33053)
from
$5.99
Ford 7.5″ & 8.8″ ring gear bolt, standard Open & TracLoc. 7/16″ x 20.
Product Features:
See More
Product Features:
- Ring gear bolt for Ford 7.5″ and 8.8″
- 7/16″ x 20
National – Bearings (Part No.HM88510)
from
$14.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Motive Gear – Differential Pinion Nut (Part No.379570S)
from
$6.49
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More
Yukon Gear – Trac Loc Spring For Ford 9" & 8" (Part No.33518)
Yukon Gear – 7.5" Ford Cover Gasket (Part No.23009)
Yukon Gear – Side Gear And Thrust Washer (0.875" Shaft) For 8.8" Ford (Part No.33300)
from
$11.99
Side gear thrust washer (0.875″ shaft) for 8.8″ Ford.
Product Features:
See More
Product Features:
- Side gear thrust washer for Ford 8.8″
- 0.875″ diameter cross pin shaft applications only
Yukon Gear – Un-Notched Cross Pin Shaft For 7.5" Ford – Oem, Not Auburn Gear (Part No.33330)
from
$36.99
Un-notched cross pin shaft for 7.5″ Ford. OEM, not Auburn gear.
Product Features:
See More
Product Features:
- Cross pin shaft for Ford 7.5″
- 3.45 and down ratios only
National – Bearings (Part No.A-6)
from
$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Motive Gear – Performance Differential Ring and Pinion (Part No.F888331)
Popular 1977 Mercury Capri Drivetrains Categories
1977 Mercury Capri Drivetrains
You count on your 1977 Mercury Capri to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 74 Drivetrains ranging in price from $3.99 to $931.99, you’re sure to find everything you need for your 1977 Mercury Capri.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 7 different brands like Yukon Gear, Dorman, and National. 1977 Mercury Capri Drivetrains start as low as $3.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 6 extensive product reviews on 1977 Mercury Capri Drivetrains.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1977 Mercury Capri below to get started!
Top-Rated Drivetrains Brands For Your 1977 Mercury Capri
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1977 Mercury Capri running right for years to come. In our inventory you’ll find brands like Yukon Gear, Dorman, National, and even more.
Popular Dorman – Help Drivetrains
You’ll find popular Dorman – Help brand products across Drive Shafts and Axles. All are waiting to get your 1977 Mercury Capri back on the road. Some of the top-rated Dorman – Help products in these categories are:
Top-Rated National Drivetrains
If National are what you’re looking for, our inventory holds plenty. We stock National brand Drivetrains for your 1977 Mercury Capri, and some of our most reviewed National parts include:
FAQs for 1977 Mercury Capri Drivetrains
What are the most purchased Drivetrains for the 1977 Mercury Capri?
Out of 74 Drivetrains for the 1977 Mercury Capri, the most popular in our inventory are:
from
$5.99
This product is not rated
Copper Washer For Ford 9" & 8" Dropout Housing
Complete Differentials
