1977 Lincoln Mark V Flywheels

Please Select your Vehicle to See Exact Fit Parts

Keep Your 1977 Lincoln Mark V in Top Shape with Quality Flywheels

Whether you’re repairing or upgrading your Flywheel, using high-quality parts is key to keeping your 1977 Lincoln Mark V looking sharp and performing at its best. At Advance Auto Parts we carry a wide selection of dependable options, including Flywheel Bolts, Flywheel Shims, and Flywheels and Flexplates. Whether you’re replacing a damaged part or enhancing your truck’s style and protection, you’ll find exactly what you need to get the job done right.

Explore Related Parts

While you’re upgrading or replacing your Flywheel, don’t forget to check out other key components like Clutch Pressure Plates. At Advance Auto Parts, we’re here to help you keep your 1977 Lincoln Mark V in peak condition, inside and out.

Essential 1977 Lincoln Mark V Flywheels

ATP – ATP Flywheel Shim, FS-10 (Part No.FS-10)

ATP Flywheel Shim, FS-10

from

$27.99
ATP Flywheel Shims install easily restoring machined manual transmission flywheels back to the proper height. On automatic transmissions the shim takes up excessive clearance caused by engine crankshaft endplay or by installing a rebuilt torque converter or rebuilt front pump.
See More

ATP – ATP Automatic Transmission Flex Plate, Z-127 (Part No.Z-127)

ATP Automatic Transmission Flex Plate, Z-127

from

$74.99
Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
See More

Hays – Hays SFI Flexplate:Ford 57-Up 332-428: 429-46, 12-049 (Part No.12-049)

Hays SFI Flexplate:Ford 57-Up 332-428: 429-46, 12-049

from

$207.99
Hays heavy-duty flexplates for high performance and competition engines are constructed of a thicker than stock steel plate, enabling them to withstand the stress of high-stall torque converters and today’s high-RPM engines. While factory stock plates tend to crack around the crankshaft hub when punished under high torque and RPM conditions, the thicker Hays Flexplate handles the force. These H.D. flexplates are supplied with a ring gear that is securely welded in place and feature dual bolt patterns for flexibility in adapting to multiple transmission style torque converters. All Hays heavy-duty flexplates are zinc-dichromate plated to resist corrosion and are SFI certified under specification 29.1.
See More

ATP – ATP Automatic Transmission Flex Plate, Z-106 (Part No.Z-106)

ATP Automatic Transmission Flex Plate, Z-106

from

$53.99
Vehicles with automatic transmissions have a flex plate. The flex plates connect the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious and expensive damage. Broken flex plates cannot be repaired, they must be replaced. Pioneer Flex Plates are made of high-quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability.
See More

ATP – ATP A/T FLYWHEEL BOLT, ZX-1016 (Part No.ZX-1016)

ATP A/T FLYWHEEL BOLT, ZX-1016

from

$17.99
ATP A/T FLYWHEEL BOLT, ZX-1016. DRIVELINE – CLUTCHES>CLUTCH KITS, HYDRAULICS & PARTS>CLUTCH PARTS>FLYWHEELS from ATP
See More

Most Popular Flywheel Bolt for 1977 Lincoln Mark Vs

Enhance your 1977 Lincoln Mark V with this popular Flywheel Bolt we have in stock, for $17.99.

ATP – ATP A/T FLYWHEEL BOLT, ZX-1016 (Part No.ZX-1016)

ATP A/T FLYWHEEL BOLT, ZX-1016

from

$17.99
ATP A/T FLYWHEEL BOLT, ZX-1016. DRIVELINE – CLUTCHES>CLUTCH KITS, HYDRAULICS & PARTS>CLUTCH PARTS>FLYWHEELS from ATP
See More

Best-Selling 1977 Lincoln Mark V Flywheel Shim

Upgrade your Mark V with our best-selling Flywheel Shim.

ATP – ATP Flywheel Shim, FS-10 (Part No.FS-10)

ATP Flywheel Shim, FS-10

from

$27.99
ATP Flywheel Shims install easily restoring machined manual transmission flywheels back to the proper height. On automatic transmissions the shim takes up excessive clearance caused by engine crankshaft endplay or by installing a rebuilt torque converter or rebuilt front pump.
See More

Top-Quality Flywheels and Flexplates for 1977 Lincoln Mark Vs

Choose a high-quality OEM or aftermarket Flywheels and Flexplate for Lincoln Mark Vs and enjoy top-notch performance from $53.99.

ATP – ATP Automatic Transmission Flex Plate, Z-106 (Part No.Z-106)

ATP Automatic Transmission Flex Plate, Z-106

from

$53.99
Vehicles with automatic transmissions have a flex plate. The flex plates connect the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious and expensive damage. Broken flex plates cannot be repaired, they must be replaced. Pioneer Flex Plates are made of high-quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability.
See More

ATP – ATP Automatic Transmission Flex Plate, Z-127 (Part No.Z-127)

ATP Automatic Transmission Flex Plate, Z-127

from

$74.99
Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
See More

Hays – Hays SFI Flexplate:Ford 57-Up 332-428: 429-46, 12-049 (Part No.12-049)

Hays SFI Flexplate:Ford 57-Up 332-428: 429-46, 12-049

from

$207.99
Hays heavy-duty flexplates for high performance and competition engines are constructed of a thicker than stock steel plate, enabling them to withstand the stress of high-stall torque converters and today’s high-RPM engines. While factory stock plates tend to crack around the crankshaft hub when punished under high torque and RPM conditions, the thicker Hays Flexplate handles the force. These H.D. flexplates are supplied with a ring gear that is securely welded in place and feature dual bolt patterns for flexibility in adapting to multiple transmission style torque converters. All Hays heavy-duty flexplates are zinc-dichromate plated to resist corrosion and are SFI certified under specification 29.1.
See More

FAQs for 1977 Lincoln Mark V Flywheels

What are the best-selling Flywheels for 1977 Lincoln Mark Vs?

Out of 5 Flywheels that fit 1977 Lincoln Mark Vs, the following parts are the top sellers:

What’s the price range for 1977 Lincoln Mark V Flywheels?

The prices of Flywheels for the 1977 Lincoln Mark V range from $17.99 up to $207.99 for the most premium parts.

What is the average price of a Flywheel for a 1977 Lincoln Mark V?

The average price for Flywheels for the 1977 Lincoln Mark V is $66.82. Keep in mind the variety of part types within our Flywheel category, where you are likely to find a wide range of prices across a variety of parts and components.

What are the cheapest Flywheels for my 1977 Lincoln Mark V?

The cheapest 1977 Lincoln Mark V Flywheels we carry are:

Does Advance Auto Parts sell Flywheels for any other 1977 Lincoln models?

Yes. We stock Flywheels for 1 other popular 1977 Lincoln models. Some of the most popular are 1977 Continental Flywheels and 1977 Versailles Flywheels.

What types of Flywheels do you sell for my 1977 Lincoln Mark V?

As of 8/2/26, these are some of the most in-demand types of Flywheels for a 1977 Lincoln Mark V:

Can I get help with 1977 Lincoln Mark V Flywheel orders?

Contact our customer support team by chat or phone, through the help desk page, where you can find instant answers about Lincoln Flywheels and more.

What is your return policy for Lincoln Mark V Flywheels?

Advance Auto Parts keeps returns simple. For new Lincoln Mark V Flywheels and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.