1977 Chevrolet Monza Exhaust Parts
More 1977 Chevrolet Monza Exhaust Parts Categories
If you’re looking for an original Exhaust Parts replacement for a 1977 Chevrolet Monza, you can search through our selection below. You’ll also find aftermarket and OEM Exhaust Parts to meet your needs.
Essential 1977 Chevrolet Monza Exhaust Parts
Flowtech – HEADER FLT BLOCK HUGGER (Part No.10010FLT)
from
$75.99
HEADER FLT BLOCK HUGGER
MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.91006)
from
$100.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 91006 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed (Part No.81126)
from
$543.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
Walker – Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed (Part No.15037)
from
$102.99
Designed to provide the required reduction in tailpipe emissions and meet EPA emissions requirements with assured compliance, Walker® Universal Catalytic Converters are available for pre-OBDII (1995 and older) vehicles.
Product Features:
See More
Product Features:
- EPA COMPLIANT — For use on pre-OBDII vehicles, 1995 and older. Not legal for sale or use in CA, CO and NY. Legal in ME on all pre-OBD vehicles only. Consult your state’s aftermarket converter regulations for details.
- NO BREAK IN REQUIRED — Ready to operate with application-specific converter shell design and mat compression, no converter break in required after installation
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
- BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.
Dorman – Double Ended Stud – 3/16-16 x 1-5/8in and 3/8-16 x 3-1/4in (Part No.29201)
from
$9.99
This exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles. Made of quality materials, this hardware is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles
- Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
- Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Double Ended Stud Kit – 3/8-16 x 1-1/4 in and 3/8-16 x 7/16 in (Part No.29200)
from
$9.99
This exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles. Made of quality materials, this hardware is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles
- Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
- Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Exhaust Stud Kit – 3/8-16 x 2-1/2 In. (Part No.03112)
from
$6.29
Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- Durable steel construction
- New hardware helps fix exhaust leaks
- Also available in the Exhaust Manifold Hardware Kit
Flowtech – Standard Header with Enhanced Fuel Efficiency and Leakproof Technology (Part No.11108FLT)
from
$223.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Flowtech – Ceramic Header (Part No.31108FLT)
from
$474.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Ceramic Headers
- Rust And Corrosion Resistance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Hooker Headers – ExhstHdr (Part No.2301HKR)
from
$642.99
ExhstHdr
Mr. Gasket – Exhaust Gasket Set (Part No.150)
from
$30.19
Manufactured from high-temperature composite exhaust material. Provides maximum torque retention to eliminate gasket failure. Can be trimmed if necessary for modified port applications. Precision die cut for an excellent fit. For OE replacement, high-performance street, drag race and oval track.
Product Features:
See More
Product Features:
- High-Temperature Exhaust Material
- Withstands Extreme Exhaust Heat
- Provides Excellent Sealing And Durability
- Superior Tensile Strength
- Resists Deteriorating
- Provides Excellent Torque Retention
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5907)
from
$31.99
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Withstands Intense Exhaust Heat
- Graphite-Impregnated Facing
- Steel Expanded Metal Core
- Superior Tensile Strength
- Resists Deteriorating
- Anti-stick Properties
- Easy Removal For Disassembly
Mr. Gasket – Copper Seal: Exhaust Gasket Set (Part No.7153)
from
$59.99
Mr. Gasket CopperSEAL Header Gaskets are a high quality copper gasket that performs extremely well and are reusable. We recommend this in all racing and high performance applications. They are for stock heads unless indicated, and work well in high heat and turbocharged applications.
Product Features:
See More
Product Features:
- Manufactured from ¿Dead Soft¿ (solid) .043″ thick copper material.
- Manufactured from ┐Dead Soft┐ (solid) .043″ thick copper material.
- .051″ embossment around each exhaust port to seal irregular surfaces. Total gasket thickness .094″
- Total gasket thickness .094″.
- Provides excellent sealing and durability
- Conforms to and seals minor surface irregularities
- For high performance street, drag race, oval track and turbocharged (extreme heat) applications.
Felpro – Exhaust Pipe Flange Gasket (Part No.60985)
from
$5.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.60477)
from
$9.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.8194)
from
$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
ARP Auto Racing – For Use With Chevy Small Block, 3/8"-16, 1"L, Hex Head, Natural, Ss, Set Of 12 (Part No.400-1111)
from
$44.49
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12-Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 Psi Tensile Strength
- 3/8″-16 Thread Size
- 1″ Underhead Length
ARP Auto Racing – For Use With Chevy Small Block, 3/8"-16, 0.75"L, Hex Head, Natural Ss, Set Of 12 (Part No.400-1101)
from
$24.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12 Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 PSI Tensile Strength
- 0.75″ Underhead Length
- Set of 12
ARP Auto Racing – For Use With Chevy Small Block, Black Oxide, Black, Chrome Moly, Set Of 12 (Part No.100-1201)
from
$18.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12 Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 PSI Tensile Strength
- Set of 12
- 0.75″ Overall Length
Taylor Gaskets – Vibe Lock Header Bolt Kit (Part No.310004)
from
$89.99
Vibe Lock Header Bolt Kit
Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)
from
$85.99Product Features:
- Show Quality Chrome Platinum
- Durable Black Finish
- Can Be Welded Or Clamped
- Complete The System
- Glass-Packed Resonators
ARP Auto Racing – ARP Header Bolt Kit (Part No.100-1402)
from
$69.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless steel kit with 12-point nuts. The stainless material is not affected by corrosion or extreme heat, making it ideal for the application. What’s more, the compact 12-point nut lets you easily slip a socket close to the pipe. Each ARP accessory stud or bolt kit includes the specific number of parts for your appliaction, plus premium-quality washers and hex or 12-point nuts, as required. Studs are manufactured with a unique nut-starter nose that helps prevent cross-threading. Studs and bolts come either Black Oxide chrome moly or Stainless. Both are nominally rated at 180,000 psi tensile strength; substantially stronger than Grade 8 hardware. Specially drilled NASCAR models are available for those who wish to safety wire their bolts to prevent loosening.
Product Features:
See More
Product Features:
- 3/8″-16 Thread Size(s)
- Steel
- Black Oxide
- Small Block Chevy
- 12-Point Head
- Set of 12
- 1.670″ Overall Length
Popular 1977 Chevrolet Monza Exhaust Parts Categories
1977 Chevrolet Monza Exhaust Parts
You count on your 1977 Chevrolet Monza to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 52 Exhaust Parts ranging in price from $2.99 to $642.99, you’re sure to find everything you need for your 1977 Chevrolet Monza.
Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 11 different brands like Felpro, Mr. Gasket, and Dorman. 1977 Chevrolet Monza Exhaust Parts start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 174 extensive product reviews on 1977 Chevrolet Monza Exhaust Parts. Some of the top-rated Exhaust Parts products we carry are Standard Grade Federal / EPA Compliant Universal Catalytic Converter with 3.9 stars and Terminator; Exhaust Tips with 4.0 stars.
Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 1977 Chevrolet Monza below to get started!
Top-Rated Exhaust Parts Brands For Your 1977 Chevrolet Monza
Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1977 Chevrolet Monza running right for years to come. In our inventory you’ll find brands like Felpro, Mr. Gasket, Dorman, and even more.
Popular Dorman Exhaust Parts
You’ll find popular Dorman brand products across Exhaust Hangers. All are waiting to get your 1977 Chevrolet Monza back on the road. Some of the top-rated Dorman products in these categories are:
from
$9.99
(1)
Double Ended Stud – 3/16-16 x 1-5/8in and 3/8-16 x 3-1/4in
Exhaust Hangers and Hardware
Top-Rated Felpro Exhaust Parts
If Felpro are what you’re looking for, our inventory holds plenty. We stock Felpro brand Exhaust Parts for your 1977 Chevrolet Monza, and some of our most reviewed Felpro parts include:
FAQs for 1977 Chevrolet Monza Exhaust Parts
What are the most purchased Exhaust Parts for the 1977 Chevrolet Monza?
Out of 52 Exhaust Parts for the 1977 Chevrolet Monza, the most popular in our inventory are:
from
$42.99
This product is not rated
Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal
Exhaust Manifold Gaskets
from
$27.49
(4)
Exhaust Gasket: High-Temperature Protection, Durability, and Reliable Sealing
Exhaust Manifold Gaskets
What are the top-rated 1977 Chevrolet Monza Exhaust Parts?
Top-rated Exhaust Parts for your 1977 Chevrolet Monza based on customer reviews/ratings are:
from
$119.99
(13)
Standard Grade Federal / EPA Compliant Universal Catalytic Converter
“Good fit great price”
from
$102.99
(4)
Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed
“easy to install preforms well”
