1977 Chevrolet Malibu Exhaust Parts
Find Your Specific 1977 Chevrolet Malibu Exhaust Parts
Below you will find various in-demand Chevrolet Exhaust Parts, components and accessories for your 1977 Malibu. Advance Auto Parts has popular Malibu parts like Catalytic Converters, Exhaust Tips, Exhaust Gaskets and more. You’ll also find aftermarket and OEM Exhaust Parts for other Malibu model years including
2014,
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022 and more. Select a category of 1977 Chevrolet Malibu Exhaust Parts below and start saving instantly.
Popular 1977 Chevrolet Malibu Exhaust Parts Categories
Essential Exhaust Parts for 1977 Chevrolet Malibus
MagnaFlow – Universal OEM Grade Federal / EPA Compliant Catalytic Converter (Part No.51206)
from
$194.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51206. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion welds greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Durable 308 stainless steel MIG welds
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
Dorman – Pre-Converter – Not CARB Compliant (Part No.679-755)
from
$899.99
This catalytic converter is precision-engineered to match the original equipment fit and function on specific vehicle years, makes and models for a reliable replacement.
Product Features:
See More
Product Features:
- Direct replacement – this catalytic converter is designed to match the fit and performance of the original equipment on specific vehicles
- Durable construction – manufactured within strict tolerances for reliable longevity
- Cost-effective solution – offers original equipment functionality at a competitive price
- Trustworthy value – backed by team of engineers and quality control experts in the United States
MagnaFlow – Direct-Fit OEM Grade Federal / EPA Compliant Catalytic Converter (Part No.21-421)
from
$969.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 21-421. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 21-421 includes (1) Flange Gasket, (2) Split Lock Washers, (6) Bolts and interchanges with OE parts 12667331. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
MagnaFlow – Direct-Fit California Grade CARB Compliant Catalytic Converter (Part No.5411905)
from
$1189.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5411905. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 5411905 includes (6) Nuts, (1) Crush Ring Gasket, (6) Flat Washers, (6) Bolts and interchanges with OE parts 20991687, 22935125. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Simplifies installation with essential gaskets and hardware being included in the box
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
Walker – CalCat CARB Universal Catalytic Converter 2.25" Inlet (ID) 2.25" Outlet (ID) (Part No.84302)
from
$389.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT : For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY : Optimal high technology wash coat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE : Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE : Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION : Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- BUY WITH CONFIDENCE : Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity warranty
Hooker Headers – Hooker Small Block Chevrolet Exhaust Manifolds (Part No.8525-1HKR)
from
$562.99
Product Features:
See More
- A smoother, cleaner appearance compared to original exhaust manifolds, while maintaining a factory style look and feel
- Made from high silicon-molybdenum ductile iron for high temperature strength plus resistance to oxidation and cracking
- Designed with a larger 1 5/8″ cross-sectional area and 2 ╜” outlets for better air flow and increased performance
- Designed for rectangular port heads
- Accommodates standard straight and Vortec straight plug head designs for better application coverage
- Includes weld-on flanges for easier downpipe pipe installation (custom downpipe required)
- Available in natural cast iron or ceramic coated finishes (silver, black and titanium)
- Includes mounting hardware and gaskets for inlet and outlet flanges
Hooker Headers – Super Comp. Header (Part No.2217-1HKR)
from
$1300.99
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
Hooker Headers – SBC STREET STOCK HDRS 1-5/8 X 3 PAINTED (Part No.2550HKR)
from
$306.99
SBC STREET STOCK HDRS 1-5/8 X 3 PAINTED
Dorman – Direct Fit Exhaust Manifold: with Heat Shield (Part No.674-567)
from
$211.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Hooker Headers – SBC STREET STOCK HDRS 1-5/8 X 3 409SS (Part No.2550-2HKR)
from
$349.99
SBC STREET STOCK HDRS 1-5/8 X 3 409SS
Felpro – Exhaust Manifold Gasket Set (Part No.MS 97122)
from
$10.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
Mr. Gasket – Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal (Part No.7401G)
from
$47.99
Upgrade to Mr. Gasket Aluminum Layered Header Gaskets and eliminate blown exhaust gaskets forever. They conform to warped and damaged surfaces to create an airtight, leak-proof seal and will not shrink or deteriorate EVER.
Product Features:
See More
Product Features:
- Withstands Intense Exhaust Heat
- Reusable header, exhaust manifold and collector flange gaskets
- Resists Deteriorating
- Manufactured from “dead soft” aluminum layers – .125″ thick
- Easy Removal For Disassembly
- Conforms easily to surface irregularities (warped flanges)
- Compresses down to 0.060″ to create a tight leak-proof seal
- Will not shrink, deteriorate, or blow out- eliminating gasket leaks
- For high performance street, drag race and oval track use
Remflex – Flexible Graphite, Set Of 2, 1-1/2 Inch X 1-5/8 Inch D-Shaped Port Size (Part No.2007)
from
$37.99
Remflex unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees – day after day, week after week, year after year. Now, they are bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.
Product Features:
See More
Product Features:
- 100 Percent Flexible Graphite Construction
- Designed To Withstand Clamping Force And Incredible Heat
- Eliminate Exhaust Leaks
- No Re-Torquing Necessary, Remflex Exhaust Gaskets Rebound 30 Percent, Creating An Optimum Seal That Eliminates The Need To Re-Torque
Felpro – Exhaust Manifold Gasket Set (Part No.MS 96973)
from
$165.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
Felpro – Exhaust Manifold Gasket Set (Part No.MS 90502)
from
$26.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5900)
from
$38.99
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-temperature steel core/graphite faced exhaust material
- Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
- Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
- Conforms to and seals minor surface irregularities
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- Anti-Stick Properties
- Easy Removal For Disassembly
Dorman – Help – Exhaust Manifold Hardware Kit (Part No.32110)
from
$31.99
This engine manifold stud and nut match the fit and function of the original hardware on specific makes and models. Ensure a thorough manifold repair or installation with this durable and reliable hardware.
Product Features:
See More
Product Features:
- Direct replacement – this engine manifold stud and nut match the fit and function of the original stud and nut on specified years, makes and models
- Ideal solution – replaces missing or damaged hardware to ensure a thorough manifold installation or repair
- Durable construction – made of quality materials for reliable service life
- Quality assured – backed by a team of product engineers based in the United States
ARP Auto Racing – For Use With Chevy Small Block, 3/8"-16, 1"L, Hex Head, Natural, Ss, Set Of 12 (Part No.400-1111)
from
$51.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12-Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 Psi Tensile Strength
- 3/8″-16 Thread Size
- 1″ Underhead Length
ARP Auto Racing – For Use With Chevy Small Block, 3/8"-16, 0.75"L, Hex Head, Natural Ss, Set Of 12 (Part No.400-1101)
from
$33.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12 Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 PSI Tensile Strength
- 0.75″ Underhead Length
- Set of 12
Taylor Gaskets – Vibe Lock Header Bolt Kit (Part No.310004)
from
$89.99
Vibe Lock Header Bolt Kit
Dorman – Exhaust Flange Hardware – 4 Bolts and 2 Studs – 3/8-16 (Part No.675-217)
from
$19.29
This engine manifold stud and nut match the fit and function of the original hardware on specific makes and models. Ensure a thorough manifold repair or installation with this durable and reliable hardware.
Product Features:
See More
Product Features:
- Direct replacement – this engine manifold stud and nut match the fit and function of the original stud and nut on specified years, makes and models
- Ideal solution – replaces missing or damaged hardware to ensure a thorough manifold installation or repair
- Durable construction – made of quality materials for reliable service life
- Quality assured – backed by a team of product engineers based in the United States
ARP Auto Racing – For Use With Chevy Big Block, 3/8"-16, 0.75"L, Hex Head, Black Oxide, Set Of 16 (Part No.100-1102)
from
$31.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12 Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 PSI Tensile Strength
- Set of 16
- 0.75″ Overall Length
Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)
from
$93.99Product Features:
- Show Quality Chrome Platinum
- Durable Black Finish
- Can Be Welded Or Clamped
- Complete The System
- Glass-Packed Resonators
Upgrade your 1977 Chevrolet Malibu with Top-Quality Exhaust Parts
When it comes to maintaining or upgrading your 1977 Chevrolet Malibu, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Exhaust Parts are key to keeping your Malibu functioning at its best. At Advance Auto Parts, we offer a wide selection of 41 Exhaust Parts for the 1977 Chevrolet Malibu, designed to meet your needs without breaking the bank.
From
Catalytic Converter
replacements to
Exhaust Tips
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 1977 Chevrolet Malibu at great prices.
Our Exhaust Parts inventory for this model
ranges from just $24.79 to $1,035.99, with
an average price of $261.41.
Our 41 Exhaust Parts in stock come from 11 trusted brands, so you’re sure to find the right part for your 1977 Chevrolet Malibu without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1977 Chevrolet Malibu, we stock popular OEM and aftermarket Exhaust Parts from top names
like MagnaFlow, and more.
MagnaFlow Exhaust Parts
start at just $119.99 and boast an impressive 4.1 stars average rating from customers.
With 196 customer reviews and counting, our 1977 Chevrolet Malibu Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Oil and Lubricants, Fluids and Chemicals
and more to make sure your 1977 Chevrolet Malibu is always ready to roll. We’re committed to providing you with everything you need to keep your Malibu in top shape, all in one place.
Start shopping confidently below for your 1977 Chevrolet Malibu!
Best-Selling Catalytic Converters for 1977 Chevrolet Malibus
Enhance the driving experience in your Chevrolet with 2 quality Catalytic Converter components, starting at $119.99.
MagnaFlow – Universal Standard Grade Federal / EPA Compliant Catalytic Converter (Part No.94006)
from
$119.99
Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94006. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design. With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Compact, lightweight construction enables installation in confined areas, welding is required
MagnaFlow – Universal California Grade CARB Compliant Catalytic Converter (Part No.3322306)
from
$561.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 3322306. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Compact, lightweight construction enables installation in confined areas, welding is required
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
Most Popular 1977 Chevrolet Malibu Exhaust Tips
Customize your Chevrolet with 1 Exhaust Tips products
like Exhaust Chrome and Stainless Tips, all
priced under $93.99.
Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)
from
$93.99Product Features:
- Show Quality Chrome Platinum
- Durable Black Finish
- Can Be Welded Or Clamped
- Complete The System
- Glass-Packed Resonators
Top Picks for 1977 Chevrolet Malibu Exhaust Gaskets
Upgrade Chevrolet Malibus with top-quality Exhaust Gaskets parts, including 19 OEM and aftermarket selections for your 1977 model.
Mr. Gasket – Performance Exhaust Gasket Set for Enhanced Sealing and Durability (Part No.150B)
from
$24.79
Mr. Gasket Performance exhaust gasket material is a heavy duty material, .062 inch thick, consisting of an acrylic binder system to resist high temperature. This material is made for sealing exhaust applications. Provides excellent sealing and durability.
Product Features:
See More
Product Features:
- Manufactured from high-temperature acrylic blend exhaust material
- Provides excellent sealing and durability
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- Resists Deteriorating
- Provides Excellent Torque Retention
Mr. Gasket – Aluminum Exhaust Gaskets for Intense Heat Resistance (Part No.7402G)
from
$49.99
Upgrade to Mr. Gasket Aluminum Layered Header Gaskets and eliminate blown exhaust gaskets forever. They conform to warped and damaged surfaces to create an airtight, leak-proof seal and will not shrink or deteriorate EVER.
Product Features:
See More
Product Features:
- Withstands Intense Exhaust Heat
- Reusable header, exhaust manifold and collector flange gaskets
- Manufactured from “dead soft” aluminum layers – .125″ thick
- Easy Removal For Disassembly
- Conforms easily to surface irregularities (warped flanges)
- Compresses down to 0.060″ to create a tight leak-proof seal
- Will not shrink, deteriorate, or blow out- eliminating gasket leaks
- For high performance street, drag race and oval track use
Mr. Gasket – Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal (Part No.7401G)
from
$47.99
Upgrade to Mr. Gasket Aluminum Layered Header Gaskets and eliminate blown exhaust gaskets forever. They conform to warped and damaged surfaces to create an airtight, leak-proof seal and will not shrink or deteriorate EVER.
Product Features:
See More
Product Features:
- Withstands Intense Exhaust Heat
- Reusable header, exhaust manifold and collector flange gaskets
- Resists Deteriorating
- Manufactured from “dead soft” aluminum layers – .125″ thick
- Easy Removal For Disassembly
- Conforms easily to surface irregularities (warped flanges)
- Compresses down to 0.060″ to create a tight leak-proof seal
- Will not shrink, deteriorate, or blow out- eliminating gasket leaks
- For high performance street, drag race and oval track use
Hooker Headers – Super Competition Header Gasket (Part No.10808HKR)
from
$26.49
Hooker’s precision-matched Super Competition header gaskets provide a sure fit and unmatched exhaust sealing. This OEM quality gasket is constructed of a thick ,.060 inch, high temperature, non-asbestos fiber laminate with a perforated steel core, which provides a superior grip and adhesion. This construction also contributes to exact fit compliance between the cylinder head and header flange, offering excellent sealing properties during extreme temperature and operating conditions.
Product Features:
See More
Product Features:
- Tear Resistant
- Precisely Cut To Match Header
Mr. Gasket – Copper Seal: Exhaust Gasket Set (Part No.7153)
from
$70.99
Mr. Gasket CopperSEAL Header Gaskets are a high quality copper gasket that performs extremely well and are reusable. We recommend this in all racing and high performance applications. They are for stock heads unless indicated, and work well in high heat and turbocharged applications.
Product Features:
See More
Product Features:
- Manufactured from ¿Dead Soft¿ (solid) .043″ thick copper material.
- Manufactured from ┐Dead Soft┐ (solid) .043″ thick copper material.
- .051″ embossment around each exhaust port to seal irregular surfaces. Total gasket thickness .094″
- Total gasket thickness .094″.
- Provides excellent sealing and durability
- Conforms to and seals minor surface irregularities
- For high performance street, drag race, oval track and turbocharged (extreme heat) applications.
Mr. Gasket – Copper Seal: Exhaust Gasket Set (Part No.7152G)
from
$71.99
Mr. Gasket CopperSEAL Header Gaskets are a high quality copper gasket that performs extremely well and are reusable. We recommend this in all racing and high performance applications. They are for stock heads unless indicated, and work well in high heat and turbocharged applications.
Product Features:
See More
Product Features:
- Manufactured from ¿Dead Soft¿ (solid) .043″ thick copper material
- Manufactured from ┐Dead Soft┐ (solid) .043″ thick copper material
- .051″ embossment around each exhaust port to seal irregular surfaces. Total gasket thickness .094″
- Provides excellent sealing and durability
- Conforms to and seals minor surface irregularities
- For high performance street, drag race, oval track and turbocharged (extreme heat) applications
Taylor Gaskets – Seal-4-Good Header Flange Gasket (Part No.66011)
from
$51.99
Seal-4-Good Header Flange Gasket
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5904)
from
$44.49
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-temperature steel core/graphite faced exhaust material
- Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
- Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
- Conforms to and seals minor surface irregularities
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- Anti-Stick Properties
- Easy Removal For Disassembly
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5900)
from
$38.99
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-temperature steel core/graphite faced exhaust material
- Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
- Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
- Conforms to and seals minor surface irregularities
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- Anti-Stick Properties
- Easy Removal For Disassembly
Edelbrock – Exhaust Manifold Gasket Set for Chevrolet (Part No.7204)
from
$26.99
Product Features:
See More
- 0.0625 in. Thickness
- 1.50 in. x 1.50 in. Port Size
- For SB Chevy
- Black Color
- Two Piece Configuration
Flowtech – Exhaust Manifold/Header Hardware (Part No.99150FLT)
from
$95.99
Exhaust Manifold/Header Hardware
Remflex – Flexible Graphite, Set Of 2, 1-1/2 Inch X 1-5/8 Inch D-Shaped Port Size (Part No.2007)
from
$37.99
Remflex unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees – day after day, week after week, year after year. Now, they are bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.
Product Features:
See More
Product Features:
- 100 Percent Flexible Graphite Construction
- Designed To Withstand Clamping Force And Incredible Heat
- Eliminate Exhaust Leaks
- No Re-Torquing Necessary, Remflex Exhaust Gaskets Rebound 30 Percent, Creating An Optimum Seal That Eliminates The Need To Re-Torque
Mr. Gasket – Ultra-Seal Exhaust Gaskets – Hi-Temp Graphite – Small Block Chevy Oval Port – 1.50"W X 1.82"H (Part No.5917)
from
$51.99
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-temperature steel core/graphite faced exhaust material
- Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
- Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
- Conforms to and seals minor surface irregularities
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- Anti-Stick Properties
- Easy Removal For Disassembly
Taylor Gaskets – Seal-4-Good Header Flange Gasket (Part No.66120)
from
$48.99
Seal-4-Good Header Flange Gasket
Remflex – Flexible Graphite, Set Of 2, 1-1/4 Inch X 1-5/8 Inch Oval Port Size (Part No.2032)
from
$37.99
Remflex unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees – day after day, week after week, year after year. Now, they are bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.
Product Features:
See More
Product Features:
- 100 Percent Flexible Graphite Construction
- Designed To Withstand Clamping Force And Incredible Heat
- Eliminate Exhaust Leaks
- No Re-Torquing Necessary, Remflex Exhaust Gaskets Rebound 30 Percent, Creating An Optimum Seal That Eliminates The Need To Re-Torque
Remflex – Flexible Graphite, Set Of 2, 1-3/8 Inch Square Port Size (Part No.2025)
from
$547.99
Remflex unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees day after day, week after week, year after year. Now, they are bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good. Whether you have an old pick up that needs a manifold gasket, or a race car with custom built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.
Product Features:
See More
Product Features:
- 100 Percent Flexible Graphite Construction
- Designed To Withstand Clamping Force And Incredible Heat
- Eliminate Exhaust Leaks
- No Re Torquing Necessary: Remflex Exhaust Gaskets Rebound 30 Percent, Creating An Optimum Seal That Eliminates The Need To Re Torque
Mr. Gasket – Exhsthdrgskt (Part No.7652G)
from
$59.99
Header Installation Kit – Chevrolet V8 1955-1991 265-400 Oval Port. Includes gaskets and fasteners necessary for header installation. Made using premium Ultra-Seal exhaust and collector gaskets. Mr. Gasket header and collector bolts deliver necessary clamp-load to seal flange mating surfaces.
Product Features:
See More
Product Features:
- Oval Port Header Gaskets
- Port Size 1.50″ x 1.82″
- Collector Gasket 3.00″ Diam. 3-bolt Style
- Includes Header & Collector Bolts
Taylor Gaskets – Header Gasket (Part No.66088)
from
$29.99
Header Gasket
Taylor Gaskets – Header Gasket (Part No.66123)
from
$29.99
Header Gasket
In-Demand Exhaust Manifold and Headers for 1977 Chevrolet Malibus
Select from 19 premium Exhaust Manifold and Headers parts for your 1977 Chevrolet Malibu, with prices ranging from $31.99 to $1,035.99.
Flowtech – Standard Header with Enhanced Fuel Efficiency and Leakproof Technology (Part No.11108FLT)
from
$234.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Flowtech – Ceramic Header (Part No.31108FLT)
from
$511.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Ceramic Headers
- Rust And Corrosion Resistance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
ARP Auto Racing – For Use With Chevy Small Block, 3/8"-16, 1"L, Hex Head, Natural, Ss, Set Of 12 (Part No.400-1111)
from
$51.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12-Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 Psi Tensile Strength
- 3/8″-16 Thread Size
- 1″ Underhead Length
ARP Auto Racing – For Use With Chevy Small Block, 3/8 – 16" Thread Size, .75" L, Natural, Set Of 12 (Part No.400-1201)
from
$33.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12-Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 Psi Tensile Strength
- 3/8″-16 Thread Size
- 1″ Underhead Length
ARP Auto Racing – 0.750" L, Hex Style Head Type, Black Oxide, Black, Chrome Moly, Set Of 12 (Part No.100-1101)
from
$31.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12-Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 Psi Tensile Strength
- Set of 12
- 0.75″ Overall Length
Patriot Exhaust – 1 5/8" 4-Tube Clippster Header (Part No.H8056)
from
$360.99
Clippster style headers are perfect for grafting modern uni-body front clipsuspensions to street rods, muscle cars and trucks. Clippster headers uselonger primaries than Tight Tucks, yet shorter than full length headers.Collectors exit toward the rear
Product Features:
See More
Product Features:
- Patriot Exhaust H8056 1 5/8″ 4-Tube Clippster Header Chevrolet 67-81 Camaro 64-77 Chevelle/Malibu 64-77 El Camino 70-77 Monte Carlo 71-94 Passenger Car/Wagon 265-400 Chevrolet Engine Raw Finish
- Mid length or “clippster” headers provide improved ground clearance for popular muscle cars and street rods.
JBA Performance – 1830S-6Js 1 5/8" Header Shorty Stainless Steel Gm Truck 5.0/5.7L With Carburetor Silver Ceramic (Part No.1830S-6JS)
from
$1035.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol
Product Features:
See More
Product Features:
- JBA Performance Exhaust 1830S-6JS 1 5/8″ Header Shorty Stainless Steel GM Truck 5.0/5.7L with Carburetor Silver Ceramic
- Mandrel bent stainless steel tube
Hooker BlackHeart – Hooker BlackHeart LS Swap Exhaust Manifolds – Stainless Steel – Polished Finish (Part No.8503-1HKR)
from
$899.99
Product Features:
See More
- 2.5 inch outlet diameter offers improved flow for maximum performance from a cast exhaust manifold
- Tight tuck design provides universal fit for most popular chassis and a clean traditional muscle car appearance
- Intended for GM LS engine swap applications where durability, quiet operation, and leak-free sealing is desired
- Polished finish, but also available in natural cast finish for a factory appearance
- Nickel plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware included
- Stainless Steel construction to provide unmatched durability and corrosion resistance
- Perfect complement to Hooker engine swap mount plates and Holley engine swap oil pans
JBA Performance – 1830S-6 1 5/8" Header Shorty Stainless Steel Gm Truck 5.0/5.7L With Carburetor (Part No.1830S-6)
from
$876.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol
Product Features:
See More
Product Features:
- JBA Performance Exhaust 1830S-6 1 5/8″ Header Shorty Stainless Steel GM Truck 5.0/5.7L with Carburetor
- Mandrel bent stainless steel tube
Hooker BlackHeart – Hooker BlackHeart LS Swap Exhaust Manifolds – Black Ceramic Finish (Part No.8502-3HKR)
from
$742.99
Product Features:
See More
- Intended for GM LS engine swap applications where durability, quiet operation, and leak-free sealing is desired
- Black ceramic coating for reduced engine compartment temps and improved corrosion resistance
- Nickel plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware included
- Cast from Hi-Silicon-Moly Ductile Iron to provide durability and corrosion resistance
- 2.5 inch outlet diameter offers improved flow for maximum performance from a cast iron exhaust manifold
- Tight tuck design provides universal fit for most popular chassis and a clean traditional muscle car appearance
- Perfect complement to Hooker engine swap mount plates and Holley engine swap oil pans
Hooker BlackHeart – Hooker BlackHeart LS Swap Exhaust Manifolds – Stainless Steel – Natural Cast (Part No.8503HKR)
from
$674.99
Product Features:
See More
- 2.5-inch outlet diameter offers improved flow for maximum performance from a cast exhaust manifold
- Tight tuck design provides universal fit for most popular chassis and a clean traditional muscle car appearance
- Intended for GM LS engine swap applications where durability, quiet operation, and leak-free sealing is desired
- Plain as-cast finish for a factory appearance. Also available in polished.
- Nickel plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware included
- Stainless Steel construction to provide unmatched durability and corrosion resistance
- Perfect complement to Hooker engine swap mount plates and Holley engine swap oil pans
Patriot Exhaust – H8047-1 1 5/8" Full Length Header (Part No.H8047-1)
from
$651.99
Don’t give up looking for headers for your vehicle. Patriot offers headersfor many applications at prices you can afford. Built with surfacemachined thick steel flanges for a great seal andmandrel bent mild steel tubing. Patriot headers areavailable r
Product Features:
See More
Product Features:
- Patriot Exhaust H8047-1 1 5/8″ Full Length Header Chevrolet 67-81 Camaro 64-77 Chevlle/Malibu 70-77 Monte Carlo 65-89 Passenger Car/Wagon 265-400 Chevrolet Engine Metallic Ceramic Finish
- Patriot offers headers for many applications at prices you can afford.
Patriot Exhaust – 1 5/8" 4-Tube Clippster Header (Part No.H8056-1)
from
$647.99
Clippster style headers are perfect for grafting modern uni-body front clipsuspensions to street rods, muscle cars and trucks. Clippster headers uselonger primaries than Tight Tucks, yet shorter than full length headers.Collectors exit toward the rear
Product Features:
See More
Product Features:
- Patriot Exhaust H8056-1 1 5/8″ 4-Tube Clippster Header Chevrolet 67-81 Camaro 64-77 Chevelle/Malibu 64-77 El Camino 70-77 Monte Carlo 71-94 Passenger Car/Wagon 265-400 Chevrolet Engine Metallic Ceramic Finish
- Mid length or “clippster” headers provide improved ground clearance for popular muscle cars and street rods.
Patriot Exhaust – H8021-1 1 5/8" 4-Tube Clippster Header (Part No.H8021-1)
from
$616.99
Clippster style headers are perfect for grafting modern uni-body front clipsuspensions to street rods, muscle cars and trucks. Clippster headers uselonger primaries than Tight Tucks, yet shorter than full length headers.Collectors exit toward the rearMid length or “clippster” headers provide improved ground clearance for popular muscle cars and street rods.
See More
Patriot Exhaust – EXHAUST HEADER (Part No.H8047-B)
from
$498.99
EXHAUST HEADER
Patriot Exhaust – EXHAUST HEADER (Part No.H8021-B)
from
$471.99
EXHAUST HEADER
Taylor Gaskets – Vibe Lock Header Bolt Kit (Part No.310004)
from
$89.99
Vibe Lock Header Bolt Kit
Taylor Gaskets – Vibe-Lock Bolt (Part No.310016)
from
$89.99
Vibe-Lock Bolt
ARP Auto Racing – For Use With Chevy Small Block, 3/8"-16, 0.75"L, Hex Head, Natural Ss, Set Of 12 (Part No.400-1101)
from
$33.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12 Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 PSI Tensile Strength
- 0.75″ Underhead Length
- Set of 12
Top-Rated Exhaust Parts Brands For Your 1977 Chevrolet Malibu
Shop for the best-rated brands offering Exhaust Parts and other products for your 1977 Chevrolet Malibus. Below you’ll find some of our best rated Exhaust Parts from MagnaFlow, and more. Exhaust Parts from these brands that fit a 1977 Malibu start at just $119.99 and are rated as high as 4.1 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular MagnaFlow 1977 Chevrolet Malibu Exhaust Parts
When it comes to maintaining or upgrading your 1977 Chevrolet Malibu, using quality Exhaust Parts is essential to ensure durability and a perfect fit. MagnaFlow ticks all of those boxes. We offer a wide selection of MagnaFlow Exhaust Parts, specifically designed for the 1977 Chevrolet Malibu. With over 1 MagnaFlow brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $119.99. Plus, with over 13 customer reviews and an average rating of 4.1 stars, you can trust that our MagnaFlow Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$119.99
(13)
Universal Standard Grade Federal / EPA Compliant Catalytic Converter
“Good fit great price”
FAQs for 1977 Chevrolet Malibu Exhaust Parts
Which Exhaust Parts are best-sellers for 1977 Chevrolet Malibus?
Out of 41 Exhaust Parts that fit 1977 Chevrolet Malibus, the following parts are the top sellers:
- Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal (6900014) – $47.99
- Universal Standard Grade Federal / EPA Compliant Catalytic Converter (16120082) – $119.99
- Super Competition Header Gasket (22311317) – $26.49
What’s the price range for 1977 Chevrolet Malibu Exhaust Parts?
Exhaust Part prices for the 1977 Chevrolet Malibu start at $24.79 and go up to $1,035.99 for the most premium parts.
What’s the average price of a Exhaust Part for a 1977 Chevrolet Malibu?
The average price for Exhaust Parts for the 1977 Chevrolet Malibu is $261.41. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Exhaust Parts for other Chevrolet Malibu model years?
What are the cheapest Exhaust Parts for my 1977 Chevrolet Malibu?
The cheapest 1977 Chevrolet Malibu Exhaust Parts we carry in stock are:
- Performance Exhaust Gasket Set for Enhanced Sealing and Durability (5020441) – $24.79
- Super Competition Header Gasket (22311317) – $26.49
- Exhaust Manifold Gasket Set for Chevrolet (22342077) – $26.99
- Header Gasket (10556773) – $29.99
- Header Gasket (10556757) – $29.99
What are the top-rated Exhaust Parts that fit the 1977 Chevrolet Malibu?
Out of 196 reviews by customers, our 1977 Chevrolet Malibu Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 1977 Chevrolet Malibu and their top-rated products:
- Exhaust Tips
- Terminator; Exhaust Tips (19310030) – $93.99
- Exhaust Gaskets
- Terminator; Exhaust Tips (19310030) – $93.99
- Exhaust Manifold and Headers
- Terminator; Exhaust Tips (19310030) – $93.99
What types of Exhaust Parts do you sell for my 1977 Chevrolet Malibu?
As of 3/1/26, these are some of the most in-demand types of Exhaust Parts for a 1977 Chevrolet Malibu:
Can I get help with 1977 Chevrolet Malibu Exhaust Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Exhaust Parts and more.
What is your return policy for Chevrolet Malibu Exhaust Parts?
Advance Auto Parts keeps returns simple. For new Chevrolet Malibu Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
