1977 Chevrolet K20 Differential Spools

Yukon Mini Spools are a low-cost traction option for vehicles looking for full-time lockup. The mini spool installs into a standard open carrier and delivers 100% power to both tires at all times. These units are not recommended for street-driven vehicles. Full spools are recommended for vehicles with large tires or high horsepower.

Product Features:

• Fits GM 10.5″ 14 bolt truck with 30 spline axles
• 4.10 and down ratio only or 4.56 and up thick gears
• Provides 100% traction to both wheels at all times
• Not recommended for street driven vehicles

Yukon Mini Spools are a low-cost traction option for vehicles looking for full-time lockup. The mini spool installs into a standard open carrier in place of the spider gears and delivers 100% power to both tires at all times. These units are not recommended for street-driven vehicles. Full spools are recommended for vehicles with large tires or high horsepower.

Product Features:

• Fits 10.5″ GM 14 bolt truck
• Provides 100% traction to both wheels at all times
• Installs into standard open carrier case

Yukon Mini Spools are a low-cost traction option for vehicles looking for full-time lockup. The mini spool installs into a standard open carrier in place of the spider gears and delivers 100% power to both tires at all times. These units are not recommended for street-driven vehicles. Full spools are recommended for vehicles with large tires or high horsepower.

Product Features:

• Fits GM 8.5″ with 30 spline axles
• Installs into a standard open carrier case
• Provides 100% traction to both wheels at all times
• Not recommended for street driven vehicles

The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

Product Features:

• Fits Dana Spicer 44 with 30 spline axles
• Made from 9310 steel for added strength
• Replaces the spiders in a standard carrier case

The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a Limited warranty against defect.

Product Features:

• Fits GM 18.5″ with 30 spline axles
• Made from 9310 steel for added strength
• Replaces the spiders in a standard carrier case

The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

Product Features:

• Fits GM 18.5″ with 28 spline axles
• Made from 9310 steel for added strength
• Replaces the spiders in a standard carrier case

Yukon Full Spools are a cost-effective way to convert a diff to 100% lockup. Installation is easy as they install in place of your differential carrier assembly. Each Yukon spool is made from high-quality 8620 steel and heat treated for additional strength. A spool is an outstanding choice for dedicated off-road and drag racing vehicles only.

Product Features:

• Fits Chrysler Dana Spicer 44 with 30 spline axles
• 3.92 and up ratio only
• Provides 100% traction to both wheels at all times
• Not recommended for street driven vehicles

Yukon Full Spools are a cost-effective way to convert a diff to 100% lockup. Installation is easy as they install in place of your differential carrier assembly. Each Yukon spool is made from high-quality 8620 steel and heat treated for additional strength. A spool is an outstanding choice for dedicated off-road and drag racing vehicles only.

Product Features:

• Fits Chrysler Dana Spicer 44 with 30 spline axles
• 3.73 and down ratio only
• Provides 100% traction to both wheels at all times
• Not recommended for street driven vehicles

Product Features:

• Fits Chrysler Dana Spicer 44 with 30 spline axles
• 3.92 and up ratio only
• Provides 100% traction to both wheels at all times
• Not recommended for street driven vehicles

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:

• Fits Chrysler Dana Spicer 44 with 30 spline axles
• 3.73 and down ratio only
• Provides 100% traction to both wheels at all times
• Not recommended for street driven vehicles

Yukon Mini Spools are a low-cost traction option for vehicles looking for full-time lockup. The mini spool installs into a standard open carrier in place of the spider gears and delivers 100% power to both tires at all times. These units are not recommended for street-driven vehicles. Full spools are recommended for vehicles with large tires or high horsepower.

Product Features:

• Fits Dana Spicer 44 with 30 spline axles
• Installs into a standard open carrier case
• Provides 100% traction to both wheels at all times
• Not recommended for street driven vehicles

Product Features:

• FULL SPOOL GM 10 BOLT 8.5 28 SPL ST

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

Product Features:

• FULL SPOOL DANA 60 35 SPLINE 4.56 & UP

Yukon Mini Spools are a low-cost traction option for vehicles looking for full-time lockup. The mini spool installs into a standard open carrier in place of the spider gears and delivers 100% power to both tires at all times. These units are not recommended for street-driven vehicles. Full spools are recommended for vehicles with large tires or high horsepower.

Product Features:

• Fits GM 8.5″ with 28 spline axles
• Installs into a standard open carrier case
• Provides 100% traction to both wheels at all times
• Not recommended for street driven vehicles

Replacement front spindle for Dana 44, Ford F150, 5 hole (approx. 6″ OD).

Product Features:

• Fits Dana Spicer 44 with 30 spline axles
• Installs into a standard open carrier case
• Provides 100% traction to both wheels at all times
• Not recommended for street driven vehicles

Product Features:

• Fits GM 8.5″ with 28 spline axles
• Installs into a standard open carrier case
• Provides 100% traction to both wheels at all times
• Not recommended for street driven vehicles
• Mini spool

Product Features:

• MINI SPOOL GM12 BOLT CAR & TRUCK STRANGE # 088430

Product Features:

• MINI SPOOL – DANA 44, 30 SPL.