1977 Chevrolet El Camino Differentials

Essential 1977 Chevrolet El Camino Differentials

Yukon Gear – Pinion Install Kit For GM 8.2" Differential (Part No.13066)

Pinion Install Kit For GM 8.2" Differential

from

$259.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits GM 8.2″
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Richmond Gear – Differential Mini Spool (Part No.78-1028-1)

Differential Mini Spool

from

$124.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

Yukon Gear – 14 Plate Carbon Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16041)

14 Plate Carbon Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

from

$404.99
Product Features:
  • Clutch kit
  • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
  • 14 piece kit
  • Carbon fiber clutches
See More

Yukon Gear – 8.6" GM 12P 12T & F8.8 Carrier Installation Kit (Part No.57010)

8.6" GM 12P 12T & F8.8 Carrier Installation Kit

from

$121.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.6″, 12 bolt car and 12 bolt truck differential. This kit contains carrier bearings, races and shims.

Product Features:
  • Fits GM 12 bolt passenger car and truck and 8.6″
  • Includes carrier bearings and races and “super” carrier shim kit
See More

Pro-King – Differential Cover Plug (Part No.742G484)

Differential Cover Plug

from

$6.59
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt

from

$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:
  • Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
  • 1/2″ head
See More

Yukon Gear – Bearing Race Driver (Part No.56017)

Bearing Race Driver

from

$215.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits HM89410 race
  • All steel construction
See More

Yukon Gear – Polished Aluminum Cover For 8.6", 8.2" And 8.5" GM Rear (Part No.32030)

Polished Aluminum Cover For 8.6", 8.2" And 8.5" GM Rear

from

$255.99
Polished aluminum cover for 8.6″, 8.2″ and 8.5″ GM rear.

Product Features:
  • Fits GM 8.5″ and 8.6″
  • Finned polished aluminum
See More

Motive Gear – Pinion Nut (Part No.3752901)

Pinion Nut

from

$7.49
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
See More

USA Standard Gear – Master Overhaul Kit for the ’82-’99 GM 7.5" and 7.625" Differential (Part No.37049)

Master Overhaul Kit for the '82-'99 GM 7.5" and 7.625" Differential

from

$209.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits 1982-1999 GM 7.5″ and 7.625″
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Driveworks – Taper Bearing Cup (Part No.S-LM-501314)

Taper Bearing Cup

from

$7.29
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – Dura Grip Positraction For GM 12 Bolt Car With 30 Spline Axles, 4.10 & Up (Part No.26013)

Dura Grip Positraction For GM 12 Bolt Car With 30 Spline Axles, 4.10 & Up

from

$839.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:
  • Fits GM 12 bolt passenger car with 30 spline axles
  • 4.10 and up ratio only
  • 4-spring, clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
  • 30 spline
See More

Yukon Gear – Cast Yoke For GM 8.5" With A 1350 U/Joint Size (Part No.41092)

Cast Yoke For GM 8.5" With A 1350 U/Joint Size

from

$234.99
Yukon cast yoke for GM 8.5″ with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 8.5″
  • 30 spline
  • 1350 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.188″ cap diameter
  • Strap style
See More

Motive Gear – Differential Mini Spool (Part No.MS7.5-28)

Differential Mini Spool

from

$101.99


Product Features:
  • MINI SPOOL GM 7 1/2″ 28 SPLINE
See More

Yukon Gear – Clutch Guide For GM 7.5" & 7.6" Dura Grip (Part No.33251)

Clutch Guide For GM 7.5" & 7.6" Dura Grip

from

$10.99
Product Features:
  • Clutch guide
  • Fits GM 7.5″ and 7.625″ Dura Grip
See More

Yukon Gear – Positraction Internals For GM 12 Bolt Car And Truck With 30 Spline Axles (Part No.16039)

Positraction Internals For GM 12 Bolt Car And Truck With 30 Spline Axles

from

$425.99
Yukon positraction internals (0.806″ diameter) for GM 12P and 12T with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit does not include clutches. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fit GM 12 bolt passenger car and truck Dura Grip positraction with 30 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

from

$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
See More

Yukon Gear – 12P, 12T, CI Vet, & 55GM 8460N Redi Sleeve Yoke Saver (Part No.30225)

12P, 12T, CI Vet, & 55GM 8460N Redi Sleeve Yoke Saver

from

$109.99
12P, 12T, CI VET, & 55GM 8460N REDI sleeve yoke saver.Yukon Mighty seal.

Product Features:
  • Pinion Redi-sleeve
  • Fits GM 12 bolt passenger car, 12 bolt truck and 1963-1979 Corvette
See More

Yukon Gear – Bearing Install Kit For GM 8.2" Differential (Part No.11064)

Bearing Install Kit For GM 8.2" Differential

from

$276.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:
  • Fits GM 8.2″
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve , marking compound and brush.
See More

USA Standard Gear – Ring & Pinion Gear Set For GM 8.5" In A 3.08 Ratio (Part No.36211)

Ring & Pinion Gear Set For GM 8.5" In A 3.08 Ratio

from

$319.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:
  • Fits GM 8.5″ and 8.6″
  • 8.50″ ring gear diameter
  • 30 spline pinion
  • 10 ring gear bolts
  • 3.08 ratio
See More

Yukon Gear – Posi Spring Kit For GM 7.5", With Preload Plates (Part No.33206)

Posi Spring Kit For GM 7.5", With Preload Plates

from

$153.99
Product Features:
  • Positraction spring kit
  • Fits GM 7.5″ and 7.625″ Dura Grip
  • Includes preload plates
See More

Yukon Gear – Standard Open Side Gear Thrust Washer For 8.5" GM (Part No.33304)

Standard Open Side Gear Thrust Washer For 8.5" GM

from

$15.99
Standard open side gear thrust washer for 8.5″ GM.

Product Features:
  • Side gear thrust washer
  • Fits GM 8.5″
See More

Motive Gear – Differential Gear Install Kit (Part No.GM7.5IK)

Differential Gear Install Kit

from

$49.99


Product Features:
  • MINI INSTALL KIT GM 7.5
See More

Yukon Gear – GM 12 Bolt Passenger Car Crush Sleeve (Part No.33104)

GM 12 Bolt Passenger Car Crush Sleeve

from

$16.99
GM 12 bolt passenger car crush sleeve. Approx 2.340″ long.

Product Features:
  • Crush sleeve for GM 12 bolt passenger car
  • 2.340″ tall
See More

Yukon Gear – 7.2" GM 7.5" GM & 8.2" GM Pinion Seal (Part No.30192)

7.2" GM 7.5" GM & 8.2" GM Pinion Seal

from

$9.99
7.2″ GM 7.5″ GM & 8.2″ GM pinion seal.Yukon Mighty seal.

Product Features:
  • Pinion seal
  • Fits GM 7.2″ IFS, 1999 and down GM 7.5″ and 7.625″ and GM 8.2″
  • 2.660″ O.D.
See More

Richmond Gear – Differential Cross Shaft (Part No.CSPGM75)

Differential Cross Shaft

from

$26.49
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

Yukon Gear – Cross Pin Shaft For GM 8.2" Posi Case – Will Fit Dura Grip Or Eaton Posi (Part No.33204)

Cross Pin Shaft For GM 8.2" Posi Case - Will Fit Dura Grip Or Eaton Posi

from

$30.99
Cross pin shaft for GM 8.2″ posi case. Will fit Yukon Dura Grip or Eaton posi. .749″ diameter.

Product Features:
  • Cross pin shaft
  • Fits GM 8.2″
  • Dura Grip positraction
See More

1977 Chevrolet El Camino Differentials

Maybe you’re in the middle of a full rebuild of that 1977 Chevrolet El Camino. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 175 different Differentials in our inventory ranging from $1.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1977 Chevrolet El Camino running smoothly.

Differentials are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 1977 Chevrolet El Camino. Valvoline, FELPRO, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1977 Chevrolet El Camino, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 1,530 reviews in this category, some of the top rated parts include Differential Shaft Lock Bolt with 4.0 stars and Bearings with 3.9 stars.

So if you’re in the market for aftermarket Differentials to keep your 1977 Chevrolet El Camino rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1977 Chevrolet El Camino Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1977 Chevrolet El Camino demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your El Camino the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Driveworks Differentials

We carry Driveworks parts in our stock across Differential Pinion Seals categories, plus more. For a 1977 Chevrolet El Camino, our most popular Driveworks Differentials include:
Oil Seal
from $7.79
(1)
Oil Seal
Differential Pinion Seals

Top 1977 Chevrolet El Camino Differentials from Felpro

Felpro products are another trusted brand when it comes to Differentials for your 1977 Chevrolet El Camino. Popular Felpro parts include:
Differential Cover Gasket
from $9.99
(195)
Differential Cover Gasket
Rear Differential Cover Gaskets

FAQs for 1977 Chevrolet El Camino Differentials

What are the most purchased Differentials for the 1977 Chevrolet El Camino?

Out of 175 Differentials for the 1977 Chevrolet El Camino, the most popular in our inventory are:
DEX/MERC Automatic Transmission Fluid, 1 Gallon
from $35.99
(17)
DEX/MERC Automatic Transmission Fluid, 1 Gallon
Differential Oil
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil

What are the top-rated 1977 Chevrolet El Camino Differentials?

Top-rated Differentials for your 1977 Chevrolet El Camino based on customer reviews/ratings are:
Differential Shaft Lock Bolt
from $5.99
(11)
Differential Shaft Lock Bolt
“great”
Bearings
from $23.99
(7)
Bearings
“Good price”
Differential Master Bearing Kit - Koyo
from $156.99
(5)
Differential Master Bearing Kit – Koyo
“was delivered as promised and on time”