1977 Cadillac Fleetwood Engine Parts
Find Your Specific 1977 Cadillac Fleetwood Engine Parts
Below you will find various in-demand Cadillac Engine Parts, components and accessories for your 1977 Fleetwood. Advance Auto Parts has popular Fleetwood parts like Engine Mounts, Camshafts, Engine Gaskets and Seals and more. You’ll also find aftermarket and OEM Engine Parts for other Fleetwood model years including
1988,
1989,
1990,
1991,
1992,
1993,
1994,
1995,
1996 and more. Select a category of 1977 Cadillac Fleetwood Engine Parts below and start saving instantly.
Popular 1977 Cadillac Fleetwood Engine Parts Categories
Essential Engine Parts for 1977 Cadillac Fleetwoods
Edelbrock – Sure Seat Valve Springs (Part No.5845)
from
$159.99
The Edelbrock #5845 Replacement Hydraulic Roller Sure Seat Valve Spring for Edelbrock cylinder heads are made of highest quality spring wire and precision wound to close tolerances.
Product Features:
See More
Product Features:
- Non-Rotator Type
- 1.460 in. Outer Diameter
- 1.060 in. Inner Diameter
- 1.060 in. Coil Blind
- Set of 16
Sealed Power – Engine Camshaft Bearing Set (Part No.1216M)
from
$59.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Imperial – Econo-Kool® Engine Oil Cooler (Part No.240459)
from
$122.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial Econo-Kool« engine oil cooler kit
- Imperial Econo-Kool® engine oil cooler kit
- Lightweight construction with high-efficiency turbulators
- Light-duty applications
- All except Chevrolet V8 applications
- Size: 3/4 in. x 7-1/2 in. x 12-1/2 in.
Felpro – Engine Gasket Set (Part No.260-1477)
from
$132.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Includes all parts needed to complete the repair
Sealed Power – Engine Connecting Rod Bearing Set (Part No.8-3345P 20)
from
$94.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed bronze alloy lining with overplate
- Popular for fatigue resistance & strength
- Provides conformability required for older apps
- Our standard material is comparable to competitors performance bearing
- Note – This material offers less resistance to wear & corrosion than other materials.
- Utilizes ISO & QS certified manufacturing
Melling – Stock Replacement Type Oil Pump Repair Kit (Part No.K-20I)
from
$32.49
Melling oil pump repair kits are provided to supply the parts needed to rebuild a specific individual oil pump. Melling kits include all the required parts needed for a quality oil pump rebuild. Although Melling recommends the installation of a new oil pump, Melling oil pump repair kits are the preferred choice when a rebuilder has the desire to reuse the original oil pump casting or front timing cover.
Product Features:
See More
Product Features:
- Includes components needed to rebuild a worn oil pump providing an alternative to purchasing a new oil pump
- Components are manufactured from high quality materials for durable wear
- Components are precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S533)
from
$8.49
Sprocket Made From High Alloy Material. Sprocket Teeth Are Heat Treated. Precision Tooth Form To Assure Proper Chain Engagement, And Precise Keyway To Tooth Timing.
Product Features:
See More
Product Features:
- Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Refer to our online catalog for detailed application-specific information
Felpro – Engine Conversion Gasket Set (Part No.CS 8540-1)
from
$49.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Validated for fit, form and function
- Unsurpassed quality you can trust
- Includes all the parts necessary to complete the repair unless otherwise noted
- Includes all the parts necessary to complete the repair unless otherwise noted
Felpro – Fuel Injector O-Ring Kit (Part No.ES 72099)
from
$9.29
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Sealed Power – Engine Crankshaft Main Bearing Set (Part No.4906MA 30)
from
$123.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- A-Series bi-metal aluminum alloy
- Greater seizure resistance than tri-metal material
- Reduces dramatically or eliminates bearing wear
- Exacting tolerances
- Meets or exceeds OEM specifications
- Made with silicon to provide greater surface hardness
National – Shaft Repair Sleeve (Part No.99176)
from
$46.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
Sealed Power – Engine Connecting Rod Bearing (Part No.2555CP 40)
from
$4.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
INA US – ENGINE TIMING CHAIN (Part No.ZC-C499)
from
$32.99
ENGINE TIMING CHAIN
Edelbrock – Hydraulic Roller Lifter for 1987 and Later S/B Chevy. (Part No.97385)
from
$36.99
Edelbrock part #97385 high performance hydraulic roller lifters for 1987 and later small-block Chevys are the perfect match for Edelbrock Rollin’ Thunder hydraulic roller cams. They are a drop-in replacement for 1987 and later blocks that accept factory r
Product Features:
See More
Product Features:
- Hydraulic Roller Lifter Type
- Steel Material
- No Tie Bar
- For Intake/Exhaust
- Sold Individually
Sealed Power – Engine Assembly Lubricant (Part No.55-400)
from
$10.49
Sealed Power parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Formulated for pre-lubrication cam lobes, lifters & engine bearings
- Increases load carrying capacity
- Holds fast to surfaces
- Exacting tolerances
- Meets or exceeds OEM specifications
- 4.0 oz. Squeeze Container
Victor Reinz – Engine Cylinder Head Gasket (Part No.61-10319-00)
from
$41.99
Product Features:
See More
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
- Composite construction
- Clear silicone top coat for cold sealability
- Dana engineering-approved for fit, form and function
Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 8753 PT-3)
from
$155.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
- Includes all the parts necessary to complete the repair unless otherwise noted
Melling – Stock Replacement Oil Pump Screen (Part No.58-FS1)
from
$39.99
Made In USA. A new Melling pick-up tube/oil screen assembly provides the lubrication oil as well as protection for your oil pump from materials that find their way into the engine oil supply system. Contaminates enter your oil system via engine wear, extended time between oil changes and other internal engine sources. These contaminates can interfere with the proper oil flow and pressure spring functions resulting in engine damage and/or failure. Melling suggests that a new properly installed oil pump pick-up tube/screen be a part of every oil pump installation. Several Melling oil pump applications are offered with an oil screen included.
Product Features:
See More
Product Features:
- Manufactured from high quality durable materials for long wear
- Precision engineering protects the engine from dirt and contaminants
- Designed for long-life and worry-free performance
- Meets or exceeds original equipment specifications
Cloyes Gear – Engine Timing Camshaft Sprocket (Part No.S706T)
from
$30.99
Sprocket Made From High Alloy Material. Features Precision Tooth Form To Assure Proper Chain Engagement, And Is Balanced For Proper Timing.
Product Features:
See More
Product Features:
- Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Refer to our online catalog for detailed application-specific information
Dorman – Rubber Expansion Plug 1-5/8" – Size Range 1-5/8" – 1-3/4" (Sold by each) (Part No.570-010)
from
$13.99
This engine intake manifold expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine intake manifold expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Concave Steel Cup Expansion Plug 1-1/4 In., Height 1.248 In. (Sold by each) (Part No.550-017)
from
$1.99
This engine cylinder head plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine cylinder head plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-115)
from
$0.43
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Carquest Premium – Engine Oil Filler Cap: Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10066)
from
$6.99
Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
Product Features:
See More
Product Features:
- Provides proper seal to ensure leak prevention
- Stops engine blow by
- High quality construction
- Meets all OEM specifications
Competition Cams – Steel Retainers, 1.055" For Beehive 1 St (Part No.787-16)
from
$85.99
This 7° steel retainer for #26915 or #26918 Valve Springs in Non Gen III Engines is precision machined from 4140 chromemoly steel and finished in black oxide. This precision retainer is specifically designed for positive location when combined with COMP Cams high-quality valve springs.
Product Features:
See More
Product Features:
- 7° angle retainers for 1.055″ diameter valve springs, 11/32″ Valve Stems
- O.D. – 1.030″, Step 1 – .640″
- Precision machined from 4140 chromemoly steel and finished in black oxide
- Designed for positive location when combined with COMP Cams high-quality valve springs
Cloyes Performance – High Performance Timing Set (Part No.9-3645X3)
from
$159.99
Billet Crankshaft Sprocket Has Three Keyways for +/- 4 Degrees Adjustability. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Roller 0.250″ Roller Diameter Chain for Reduced Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.
Product Features:
See More
Product Features:
- The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
- Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
- Refer to our online catalog for detailed application-specific information
- Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.
Competition Cams – High Energy 212/212 Hydraulic Flat Cam (Part No.42-228-4)
from
$297.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.
Product Features:
See More
Product Features:
- Good blend of efficiency and performance.
- Perfect choice for performance street rebuilds.
- Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.2296)
from
$9.99
Anchor 2296 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1964-1978
- Weight approx: 4 Lbs
- With Interlock
- Part Group: 2296, 2296
GM Genuine Parts – Multi-Purpose Threaded Plug (Part No.14084945)
from
$9.99
GM Genuine Parts Multi Purpose Threaded Plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Upgrade your 1977 Cadillac Fleetwood with Top-Quality Engine Parts
When it comes to maintaining or upgrading your 1977 Cadillac Fleetwood, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Cadillac or enhancing its overall performance, Engine Parts are key to keeping your Fleetwood functioning at its best. At Advance Auto Parts, we offer a wide selection of 62 Engine Parts for the 1977 Cadillac Fleetwood, designed to meet your needs without breaking the bank.
From
Engine Mount
replacements to
Camshafts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1977 Cadillac Fleetwood at great prices.
Our Engine Parts inventory for this model
ranges from just $0.43 to $702.99, with
an average price of $115.28.
Our 62 Engine Parts in stock come from 11 trusted brands, so you’re sure to find the right part for your 1977 Cadillac Fleetwood without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1977 Cadillac Fleetwood, we stock popular OEM and aftermarket Engine Parts from top names
like Carquest Premium, National, Imperial, and more.
Carquest Premium Engine Parts
start at just $6.99 and boast an impressive 4.4 stars average rating from customers.
National and Imperial also bring quality to the table, with Engine Parts available starting at $36.49, and at an average 4.3 stars rating.
With 132 customer reviews and counting, our 1977 Cadillac Fleetwood Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1977 Cadillac Fleetwood is always ready to roll. We’re committed to providing you with everything you need to keep your Fleetwood in top shape, all in one place.
Start shopping confidently below for your 1977 Cadillac Fleetwood!
Best-Selling Engine Mounts for 1977 Cadillac Fleetwoods
Enhance the driving experience in your Cadillac with 1 quality Engine Mount components, starting at $9.29.
Anchor – Engine Mount: Front Right, Front Left, 1 Piece (Part No.2387)
from
$9.29
Anchor 2387, This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1975-1990
- Weight approx: 3 Lbs
- Design: Clamshell
- Part Group: 2387, 2387
Most Popular 1977 Cadillac Fleetwood Camshafts
Customize your Cadillac with 5 Camshafts products
like Camshaft Followers,
Camshaft Bearings, and
Camshafts, all
priced under $702.99.
Sealed Power – Engine Valve Lifter (Part No.HT-969)
from
$8.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Competition Cams – Magnum 224/224 Hydraulic Flat Cam for Cadillac 425, 472, 500 (Part No.94-306-5)
from
$702.99
Magnum 224/224 Hydraulic Flat Cam for Cadillac 425, 472, 500
Competition Cams – Thumpr 226/241 Hydraulic Flat Cam for Cadillac 425, 472, 500 (Part No.94-600-5)
from
$679.99
Thumpr 226/241 Hydraulic Flat Cam for Cadillac 425, 472, 500
Competition Cams – Mutha’ Thumpr 234/249 Hydraulic Flat Cam for Cadillac 425, 472, 500 (Part No.94-601-5)
from
$679.99
Mutha’ Thumpr 234/249 Hydraulic Flat Cam for Cadillac 425, 472, 500
Sealed Power – Engine Camshaft Bearing Set (Part No.1216M)
from
$59.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Top Picks for 1977 Cadillac Fleetwood Engine Gaskets and Seals
Upgrade Cadillac Fleetwoods with top-quality Engine Gaskets and Seals parts, including 2 OEM and aftermarket selections for your 1977 model.
Felpro – PermaTorque Engine Gasket Set (Part No.FS 8540 PT)
from
$143.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
- SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Felpro – Engine Conversion Gasket Set (Part No.CS 8540-1)
from
$49.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Validated for fit, form and function
- Unsurpassed quality you can trust
- Includes all the parts necessary to complete the repair unless otherwise noted
- Includes all the parts necessary to complete the repair unless otherwise noted
In-Demand Engine Timing Parts for 1977 Cadillac Fleetwoods
Select from 8 premium Engine Timing Parts parts for your 1977 Cadillac Fleetwood, with prices ranging from $8.99 to $181.99.
Cloyes Performance – High Performance Timing Set (Part No.9-3639X3)
from
$181.99
Billet Crankshaft Sprocket Has Three Keyways for +/- 4 Degrees Adjustability. Both Billet Steel Sprockets are Heat Treated for Durability. True Roller Chain for Reduced Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.
Product Features:
See More
Product Features:
- The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
- Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
- Refer to our online catalog for detailed application-specific information
- Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.
Cloyes Gear – Engine Timing Set (Part No.C-3034K)
from
$49.99
Sprockets Are Made From High Alloy Steel, and Heat-Treated For Durability. Chain Is Pre-Stressed and Heat-Treated For Longevity. SET INCLUDES: S404T Engine Timing Camshaft Sprocket (1 EA), S405 Engine Timing Crankshaft Sprocket (1 EA), C498 Engine Timing Chain (1 EA).
Product Features:
See More
Product Features:
- Utilizes the latest in design and technology to offer complete chain sets
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Utilizes the latest in design and technology to offer complete chain sets
- Refer to our online catalog for detailed application-specific information
Cloyes Performance – Engine Timing Set (Part No.9-1139)
from
$115.99
Billet Crankshaft Sprocket Has Three Keyways for +/- 4 Degrees Adjustability. Both Sprockets are Heat Treated for Durability. Heavy Duty Half Inch Pitch Single Roller Chain for Reduced Friction.
Product Features:
See More
Product Features:
- The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
- Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
- Refer to our online catalog for detailed application-specific information
- Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.
INA US – ENGINE TIMING SET (Part No.ZC-C-3034K)
from
$71.99
ENGINE TIMING SET
Cloyes Performance – High Performance Timing Chain (Part No.9-190)
from
$48.99
High Performance 1/2″ Pitch Single Roller Replacement True Roller Chain. Heat Treated and Processed Links to Maximize Breaking Strength while Remaining Ductile for Toughness. Prestressed to Increase Fatigue Life.
Product Features:
See More
Product Features:
- A timing chain synchronizes the rotation of the crankshaft and camshaft(s), ensuring proper timing of the engines valve events for each cylinder
- Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
- From stock replacement to high performance, Cloyes has the most complete timing chain catalog
- Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Cloyes recommends the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced as these components play a vital role in system stability and accurate timing
- Refer to our online catalog for detailed application-specific information
- Keep your engines valvetrain in perfect time with Cloyes, the world leader in timing drive systems
Cloyes Gear – Engine Timing Chain (Part No.C498)
from
$29.99
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Links With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.
Product Features:
See More
Product Features:
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
- CAD designed and manufactured using premium materials
- Refer to our online catalog for detailed application-specific information
- Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.
Cloyes Gear – Engine Timing Camshaft Sprocket (Part No.S404T)
from
$25.99
Sprocket Made From High Alloy Material. Features Precision Tooth Form To Assure Proper Chain Engagement, And Is Balanced For Proper Timing.
Product Features:
See More
Product Features:
- Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Refer to our online catalog for detailed application-specific information
Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S405)
from
$8.99
Sprocket Made From High Alloy Material. Sprocket Teeth Are Heat Treated. Precision Tooth Form To Assure Proper Chain Engagement, And Precise Keyway To Tooth Timing.
Product Features:
See More
Product Features:
- Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Refer to our online catalog for detailed application-specific information
Most Sold 1977 Cadillac Fleetwood Valve Cover and Cylinder Heads
Explore our best-selling Cadillac parts for the 1977 Fleetwood among 18 OEM and aftermarket options starting from $0.43.
Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-115)
from
$0.43
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Competition Cams – Super Valve Locks, 11/32" 1 St (Part No.611-16)
from
$479.99
Inside tang-to-taper relationship held tightly for repeatable valve spring installed heights
Product Features:
See More
Product Features:
- For simplicity, any Super Lock fits any COMP Cams 10° retainer – just choose the correct lock for you valve size and application
- Super Locks are recommended in all race applications
Competition Cams – VALVE SPRINGS, 1.310" BEEHIVE 1 ST (Part No.26918-16)
from
$534.99
With a .625″ maximum lift, these Beehive Valve Springs were designed for hydraulic roller cams in LS1, LS2 and LS6 engines. COMP Cams Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life. Because of the unique Beehive design, the valve train can handle more RPM and more aggressive cam profiles.
Product Features:
See More
Product Features:
- Seat pressure: 125 lbs. @ 1.800″, Open Pressure: 367 lbs. @ 1.150″
- O.D.: 1.075″ (Top) 1.310″ (Bottom), I.D.: .650″ (Top) .885″ (Bottom)
- Designed for hydraulic roller cams
- .625″ maximum lift, 1.310″ O.D.
- Originally designed for LS engine applications but will work in 5.7L Hemi engines and many others
Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 8540 PT)
from
$121.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
- SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Competition Cams – 7 Degree Steel Retainer Set of 100 for Chevrolet/Buick V6 with 1.250" OD Spring (Part No.742-100)
from
$636.99
7 Degree Steel Retainer Set of 100 for Chevrolet/Buick V6 with 1.250" OD Spring
Competition Cams – Set of 100 – 10 Degree 11/32 Single Groove Locks witho Recess +.050 Height (Part No.614-100)
from
$261.99
Set of 100 – 10 Degree 11/32 Single Groove Locks witho Recess +.050 Height
Competition Cams – 10 Degree Steel Retainers for 26120 Beehive Springs (Part No.795-16)
from
$123.99
10 Degree Steel Retainers for 26120 Beehive Springs
Competition Cams – Set of 16 – 10 Degree 11/32 Single Groove Locks witho Lash Cap Recess +.050 Height (Part No.614-16)
from
$38.99
Set of 16 – 10 Degree 11/32 Single Groove Locks witho Lash Cap Recess +.050 Height
Competition Cams – 1 Spring (Part No.26918-1)
from
$24.99
1 Spring
Competition Cams – Hardened Steel Set of 16 – 7 Degree, 11/32", Single Groove Street Locks (Part No.601-16)
from
$21.99
Hardened Steel Set of 16 – 7 Degree, 11/32", Single Groove Street Locks
Competition Cams – Set of 8 – 10 Degree 11/32 Single Groove Locks witho Lash Cap Recess +.050" Height (Part No.614-8)
from
$20.99
Set of 8 – 10 Degree 11/32 Single Groove Locks witho Lash Cap Recess +.050" Height
Competition Cams – 1 Spring (Part No.26981-1)
from
$20.99
1 Spring
Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.8540 PT)
from
$20.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Application specific design to ensure a perfect fit
- Built to exceed all original equipment specifications
- Validated for fit, form, and function
- Unsurpassed quality you can trust
Competition Cams – Set of 4 – 10 Degree 11/32 Single Groove Locks witho Lash Cap Recess +.050 Height (Part No.614-4)
from
$11.99
Set of 4 – 10 Degree 11/32 Single Groove Locks witho Lash Cap Recess +.050 Height
Competition Cams – 10 Degree, 11/32", Single Groove Lock with Lash Cap Recess (Part No.611-1)
from
$6.99
10 Degree, 11/32", Single Groove Lock with Lash Cap Recess
Competition Cams – 10 Degree, 11/32", Single Groove Lock witho Lash Cap Recess, +.050" Height (Part No.614-1)
from
$6.99
10 Degree, 11/32", Single Groove Lock witho Lash Cap Recess, +.050" Height
Competition Cams – Hardened Steel 7 Degree, 11/32", Single Groove Street Lock (Part No.601-1)
from
$5.99
Hardened Steel 7 Degree, 11/32", Single Groove Street Lock
Dorman – Concave Steel Cup Expansion Plug 1-1/4 In., Height 1.248 In. (Sold by each) (Part No.550-017)
from
$1.99
This engine cylinder head plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine cylinder head plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Top-Rated Engine Parts Brands For Your 1977 Cadillac Fleetwood
Shop for the best-rated brands offering Engine Parts and other products for your 1977 Cadillac Fleetwoods. Below you’ll find some of our best rated Engine Parts from Carquest Premium, National, and Imperial, and more. Engine Parts from these brands that fit a 1977 Fleetwood start at just $6.99 and are rated as high as 4.4 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Carquest Premium 1977 Cadillac Fleetwood Engine Parts
When it comes to maintaining or upgrading your 1977 Cadillac Fleetwood, using quality Engine Parts is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Engine Parts, specifically designed for the 1977 Cadillac Fleetwood. With over 1 Carquest Premium brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99. Plus, with over 15 customer reviews and an average rating of 4.4 stars, you can trust that our Carquest Premium Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$6.99
(15)
Engine Oil Filler Cap: Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack
“Direct fit for 194 gif 350”
Popular National 1977 Cadillac Fleetwood Engine Parts
National auto parts is one of the highest quality Engine Part brands in the market. Any 1977 Cadillac Fleetwood owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 1977 Fleetwood, Advance Auto Parts carries a full inventory of 1 National Engine Parts. Plus you will be keeping your Cadillac in peak condition while saving money because prices on these National Engine Parts range up to $36.49, plus, with more than 1 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.
from
$36.49
(1)
Shaft Repair Sleeve
“Fixed my Ford F-150 4.2. Fit well and installation tool seated the sleeve exactly where it needed to be. Super easy to use and covered the grooved s”
FAQs for 1977 Cadillac Fleetwood Engine Parts
Which Engine Parts are best-sellers for 1977 Cadillac Fleetwoods?
Out of 62 Engine Parts that fit 1977 Cadillac Fleetwoods, the following parts are the top sellers:
- Engine Valve Lifter (5688736) – $8.99
- Rubber Expansion Plug 1-3/4 In. – Size Range 1-3/4 In. – 1-7/8 In. (5701309) – $10.99
- Shaft Repair Sleeve (3271757) – $36.49
What’s the price range for 1977 Cadillac Fleetwood Engine Parts?
Engine Part prices for the 1977 Cadillac Fleetwood start at $0.43 and go up to $702.99 for the most premium parts.
What’s the average price of a Engine Part for a 1977 Cadillac Fleetwood?
The average price for Engine Parts for the 1977 Cadillac Fleetwood is $115.28. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Engine Parts for other Cadillac Fleetwood model years?
What are the cheapest Engine Parts for my 1977 Cadillac Fleetwood?
The cheapest 1977 Cadillac Fleetwood Engine Parts we carry in stock are:
- Engine Valve Spring Retainer Keeper (19694179) – $0.43
- Concave Steel Cup Expansion Plug 1-1/4 In., Height 1.248 In. (Sold by each) (22144303) – $1.99
- Steel Cup Expansion Plug 1-49/64 In., Height 0.380 (3492222) – $1.99
- Steel Cup Expansion Plug 2.00 In., Height 0.420 (sold by each) (16140193) – $2.29
- Steel Cup Expansion Plug 1-53/64 In., Height 0.380 (sold by each) (22140430) – $2.29
What are the top-rated Engine Parts that fit the 1977 Cadillac Fleetwood?
Out of 132 reviews by customers, our 1977 Cadillac Fleetwood Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 1977 Cadillac Fleetwood and their top-rated products:
- Valve Cover and Cylinder Heads
- Engine Valve Spring Retainer Keeper (19694179) – $0.43
- Engine Internals
- Engine Valve Spring Retainer Keeper (19694179) – $0.43
What types of Engine Parts do you sell for my 1977 Cadillac Fleetwood?
As of 3/1/26, these are some of the most in-demand types of Engine Parts for a 1977 Cadillac Fleetwood:
Can I get help with 1977 Cadillac Fleetwood Engine Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Cadillac Engine Parts and more.
What is your return policy for Cadillac Fleetwood Engine Parts?
Advance Auto Parts keeps returns simple. For new Cadillac Fleetwood Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
