1977 Buick Century Performance Distributors

Essential 1977 Buick Century Performance Distributors

MSD Ignition – Distributor Cap; GM HEI; Red (Part No.8411)

Distributor Cap; GM HEI; Red

from

$49.49
The cap of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap. To make things easy, we now offer these caps as replacement kits.

Product Features:
  • Stock GM HEI replacement distributor cap
  • Red
See More

MSD Ignition – Rotor; GM HEI (Part No.8410)

Rotor; GM HEI

from

$13.29
Replacement rotor for Chevrolet HEI style distributors.

Product Features:
  • For HEI distributors
  • Resist carbon tracking
  • Low resistance brass
  • Max voltage transfer
  • Molded from insulated material
See More

PerTronix – D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor (Part No.D9007)

D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor

from

$30.99
Wiring Harness and CapacitorPremium quality wire harness and capacitor insure good connection and “static free” operation.

Product Features:
  • PerTronix D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor
  • Premium quality wire harness and capacitor.
See More

PerTronix – D9001 Flame-Thrower HEI Distributor Advance Curve Kit (Part No.D9001)

D9001 Flame-Thrower HEI Distributor Advance Curve Kit

from

$26.99
Mechanical Advance Curve Ki tPrecision machined chromoly weights and center plate eliminate erratic timing. Three sets of springs, guide bushings and complete installation instructions make recurving your distributor easy.

Product Features:
  • PerTronix D9001 Flame-Thrower HEI Distributor Advance Curve Kit
  • Precision machined chromoly weights and center plate.
See More

Mr. Gasket – Distributor Hold-Down Clamp (Part No.1009)

Distributor Hold-Down Clamp

from

$9.99
Add sparkle to your engine with this chromed hold-down clamp. With bolt and gasket. Serrations on the bottom prevent distributor and magneto rotation for accurate timing.

Product Features:
  • Rolled Edges For Strength
  • Ideal For Magnetos
  • Ideal For Ignition Distributor
See More

Mallory – Mallory Unilite Dist.: Pontiac 301-455 (Part No.3758001)

Mallory Unilite Dist.: Pontiac 301-455

from

$538.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.

Product Features:
  • Improved Combustion And Economy
  • Increased Spark Plug Life
  • Improved Cold Weather Starting
  • Maintenance Free Operation
  • Accurate Spark Timing
  • Self-Lubricating Bushings
  • Years Of Trouble-Free Service
See More

MSD Ignition – Distributor; Buick V8 Billet; 400-455 (Part No.8517)

Distributor; Buick V8 Billet; 400-455

from

$545.99
This distributor uses a high output magnetic trigger to fire an MSD Ignition control. Accurate trigger signals and spark delivery are the responsibility of the QPQ-coated steel shaft. A sealed ball bearing and long sintered bushing hold this shaft stable at any RPM. An adjustable mechanical advance mechanism is mounted on top of the shaft. Nylon pads ensure smooth movement of the fine balanced weights for accurate timing advancement. A variety of advance stop bushings and springs are supplied so you can dial in a custom curve.

Product Features:
  • CNC Machined Billet Alum. Housing and Billet Alum. Base
  • Must Be Used w/An MSD Ignition Control
  • Must Be Used w/An MSD 6/7/8/10 Series Ignition
  • Mech. advance assem. can be locked out for crank trigger systems
  • QPQ coated polished steel shaft; guided by sealed ball bearings
  • Easy-to-adjust mech. advance w/supplied springs and stop bushings
  • No CARB Exemption Order Number
See More

MSD Ignition – Distributor; Buick V8 215-350 Pro-Billet (Part No.8548)

Distributor; Buick V8 215-350 Pro-Billet

from

$593.99
MSD Pro-Billet Distributors are the finest performance and racing distributors available. Every feature has been engineered to endure the rigors of high performance and racing engines. Whether cruising the streets or racing stock cars, dragsters, boats or trucks, MSD has a distributor for it. MSD uses state-of-the-art, Computer Numerical Controlled (CNC) mills and lathes to machine each housing. After a long series of precise cuts and movements, the billet is formed into a flawless distributor housing that is accurate to within 0.001″. The flex-free housings are lightweight, have no porosity or weak areas and look great on polished, show quality engines.

Product Features:
  • CNC machined billet aluminum housing and billet aluminum base
  • Must Be Used w/An MSD Ignition Control
  • Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
  • Mech. advance assem. can be locked out for crank trigger systems
  • Advance plate and weights are fine blanked from chrome moly steel
  • QPQ coated for friction reduction
  • QPQ coated polished steel shaft; guided by sealed ball bearings
  • Easy-to-adjust mech. advance w/supplied springs and stop bushings
See More

MSD Ignition – Distributor; Buick 455 V8; Ready-to-Run (Part No.8552)

Distributor; Buick 455 V8; Ready-to-Run

from

$647.99
If you’re looking for a performance distributor for your Buick or Nailhead your search is over! MSD’s Ready-to-Run distributor incorporates a magnetic pickup that never wears out! Plus, the distributor has a built in ignition module so there is no need to mount an external MSD Ignition control. Not only do you get the benefits of electronic triggering, but your engine will awaken with the powerful sparks from the ignition module. This module delivers up to 7.5 A to the coil creating a stout inductive spark. This improves combustion of the fuel mixture resulting in quick starts, a smooth idle and great performance! Another advantage of an MSD distributor is the accurate and adjustable mechanical advance assembly. The advance curve is easy to adjust with different advance springs and stop bushings which are included. To top it off there is a vacuum advance canister and MSD’s strong cap and wire retainer.

Product Features:
  • Simple and clean three wire installation
  • CARB E.O. Approved
  • Does not require an MSD Ignition Control
  • Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
  • Mech. advance assem. can be locked out for crank trigger systems
  • QPQ coated polished steel shaft; guided by sealed ball bearings
  • Maintenance-free magnetic pickup and precision reluctor
  • Creates stable trigger signals throughout the rpm range
See More

Accel – Dist:Chev V8 Hei Vac W/Coil (Part No.59107C)

Dist:Chev V8 Hei Vac W/Coil

from

$210.99
Performance Replacement HEI Distributor, direct plug-in with OE type connectors, GM HEI equipped Cars, Trucks (Pre-Computer). High dielectric strength cap, brass male towers. ACCEL Performance Replacement Distributors are the perfect choice for your daily driver or street machine. Using all new components, these distributors feature High-performance ACCEL Electronics. All new components-housings are either new castings or turned from billet stock, centerless ground shaft with oil lite bushings. High dielectric strength cap, balanced rotor. Male tower distributor cap with brass cap and rotor contacts (Ford and AMC Models feature screw-mounted wire retainer for the ultimate plug wire retention). Iron or steel distributor gear. Direct plug-in replacement with factory-type connectors for plug and play installation.

Product Features:
  • Direct Plug In Factory Replacement Plug And Play
  • CNC Machined 6061 T6 Billet Aluminum Housing
  • High Dielectric Strenght Thermoplastic Cap With Br
  • 4 Topin Module With Dwell Control Triggers At 75 R
  • Easy Access Fully Adjustable Mechanical Advance
  • Adjustable Vacuum Advance
  • Includes Performance Coil
  • Fit non computerized vehicles
See More

MSD Ignition – Distributor; Buick Nailhead; Ready-to-Run (Part No.8524)

Distributor; Buick Nailhead; Ready-to-Run

from

$702.99
The Buick Nailhead is one of the most sought after nostalgic engines for rods and is still providing the smooth power to plenty of Buick’s. Nailhead fans can finally get a state-of-the-art distributor to provide the fire! MSD’s Nailhead distributor is a ready to run unit which incorporates a magnetic pickup that never wears out. Plus, the distributor has a built in ignition module so there is no need to mount an external MSD Ignition control. The module delivers up to 7.5 A to the coil creating a stout inductive spark. Not only do you get the benefits of electronic triggering, but your engine will awaken with powerful sparks from the ignition module. This improves combustion of the fuel mixture resulting in quick starts, a smooth idle and great performance.

Product Features:
  • Simple and clean three wire installation
  • Includes built-in Rev Limiter
  • Does not require an MSD Ignition Control
  • Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
  • Mech. advance assem. can be locked out for crank trigger systems
  • Advance plate and weights are fine blanked from chrome moly steel
  • QPQ coated for friction reduction
  • QPQ coated polished steel shaft; guided by sealed ball bearings
  • Maintenance-free magnetic pickup and precision reluctor
  • Creates stable trigger signals throughout the rpm range
  • CNC machined billet aluminum housing and billet aluminum base
  • Vacuum advance canister for improved economy (can be locked out)
See More

Accel – Distributor Cap And Rotor Kit (Part No.8130)

Distributor Cap And Rotor Kit

from

$32.88


Product Features:
  • Heavy Duty Cap and Rotor Kit
  • With Brass Inserts
See More

Accel – Distributor Cap And Rotor Kit (Part No.8124)

Distributor Cap And Rotor Kit

from

$48.49


Product Features:
  • Heavy Duty Cap and Rotor Kit
  • With Brass Inserts
See More

MSD Ignition – Distributor Cap and Rotor; GM HEI Distributor; Red (Part No.8416)

Distributor Cap and Rotor; GM HEI Distributor; Red

from

$46.49
The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.

Product Features:
  • Designed w/Performance In Mind
  • High Quality Material
  • Stainless Terminals
  • Performance replacement part
See More

1977 Buick Century Performance Distributors

Maybe you’re in the middle of a full rebuild of that 1977 Buick Century. Maybe you just need a couple of Performance Distributors. Either way, Advance Auto Parts has 7 different Performance Distributors in our inventory ranging from $9.99 to $210.99. That means you can find the exact parts or products you need to keep that 1977 Buick Century running smoothly.

Performance Distributors are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1977 Buick Century. MSD Ignition, Accel, and Mr. Gasket are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Distributors for your 1977 Buick Century, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 762 reviews in this category, some of the top rated parts include D9001 Flame-Thrower HEI Distributor Advance Curve Kit with 5.0 stars and D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor with 4.0 stars.

So if you’re in the market for aftermarket Performance Distributors to keep your 1977 Buick Century rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Distributors Brands To Make Your 1977 Buick Century Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1977 Buick Century demands trusted brand parts and products to keep it running. Many trusted brands of Performance Distributors make up Advance Auto Parts’ inventory, and all are ready to help make your Century the best it can be. Be sure to browse some of our top Performance Distributors brands and parts.

Popular MSD Ignition Performance Distributors

We carry MSD Ignition parts in our stock across Performance Distributor Caps and Performance Distributor Cap and Rotor Kits categories, plus more. For a 1977 Buick Century, our most popular MSD Ignition Performance Distributors include:
Distributor Cap; GM HEI; Red
from $49.49
(1)
Distributor Cap; GM HEI; Red
Performance Distributor Caps
Distributor Cap and Rotor; GM HEI Distributor; Red
from $46.49
(49)
Distributor Cap and Rotor; GM HEI Distributor; Red
Performance Distributor Cap and Rotor Kits

FAQs for 1977 Buick Century Performance Distributors

What are the most purchased Performance Distributors for the 1977 Buick Century?

Out of 7 Performance Distributors for the 1977 Buick Century, the most popular in our inventory are:
Dist:Chev V8 Hei Vac W/Coil
from $210.99
(19)
Dist:Chev V8 Hei Vac W/Coil
Performance Distributors
Distributor Hold-Down Clamp
from $9.99
This product is not rated
Distributor Hold-Down Clamp
Performance Distributor Components
Rotor; GM HEI
from $13.29
This product is not rated
Rotor; GM HEI
Performance Distributor Rotors

What are the top-rated 1977 Buick Century Performance Distributors?

Top-rated Performance Distributors for your 1977 Buick Century based on customer reviews/ratings are:
D9001 Flame-Thrower HEI Distributor Advance Curve Kit
from $26.99
(1)
D9001 Flame-Thrower HEI Distributor Advance Curve Kit
“This is a good product for a reasonable price”
D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor
from $30.99
(1)
D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor
“Works well, good quality harness!”