1977 BMW 630CSi Fuel and Emissions Systems

Essential Fuel and Emissions Systems for 1977 BMW 630CSis

Cardone – Remanufactured Mass Air Flow Sensor (Part No.74-20037)

Remanufactured Mass Air Flow Sensor

from

$116.99
CARDONE Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.

Product Features:
  • 100% re-solder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
  • On-car vehicle validation routines ensure that modules meet all form, fit, durability and performance requirements.
  • All modules are 100% tested with automated computer test equipment to ensure full functionality and reliability.
  • Our sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate feedback to the vehicle┐s engine control management system.
  • Components are rated to handle demanding temperature variations for optimum reliability in every environment.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Delphi – Electric Fuel Pump: With Extra Fittings, Insulating Sleeve, Nuts/Washers, Terminal Hardware (Part No.FE0023)

Electric Fuel Pump: With Extra Fittings, Insulating Sleeve, Nuts/Washers, Terminal Hardware

from

$221.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
  • Improved pump performance as a result of Delphi’s innovative design and durability
  • Restores fast pressure performance and system integrity, translating to better pumping through less energy
  • Part is validated, tested and matched to the right vehicle application
  • Lower amperage draws less load on vehicle’s electrical system
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Always replace the fuel strainer when doing a fuel pump repair
See More

Carquest Premium – Fuel Pump Includes Wiring Harness (Part No.E2496044)

Fuel Pump Includes Wiring Harness

from

$151.99
Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

Pierburg – Electric Fuel Pump (Part No.E3000422640APG)

Electric Fuel Pump

from

$267.17
PIERBURG Fuel Pumps excel through their highly developed technology, optimum pumping characteristics when hot, and their low noise level. For over 80 years PIERBURG has been a leading manufacturer of fuel pumps for European vehicles

Product Features:
  • Made in Europe – 100% from OE factories and thus OE Standard
  • Optimal hot fuel supply properties and low noise level
  • Online Service and Product Information
  • Provides OE performance and dependability Installation Note: To avoid future warranties clean tank and change fuel filter when installing a new pump
See More

Carquest Premium – Fuel Injector Seal Kit (Part No.AS010)

Fuel Injector Seal Kit

from

$11.49
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:
  • Premium OE quality materials
  • Services one injector
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A213-1125)

Remanufactured Fuel Injector

from

$43.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new O-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

ACDelco – Multi-Purpose Wire Connector with Leads (Part No.PT2164)

Multi-Purpose Wire Connector with Leads

from

$16.79
ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Rein – Hose Clamp (Part No.Y3063860432RIN)

Hose Clamp

from

$4.04
Hose Clamp

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)

Fuel Cap Tester Adapter

from

$34.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Carquest Premium – Fuel Cap Tester Adapter (Part No.12410)

Fuel Cap Tester Adapter

from

$15.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Upgrade your 1977 BMW 630CSi with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1977 BMW 630CSi, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your 630CSi functioning at its best. At Advance Auto Parts, we offer a wide selection of 14 Fuel and Emissions Systems for the 1977 BMW 630CSi, designed to meet your needs without breaking the bank. From Air Flow Sensor replacements to Fuel Injectors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 1977 BMW 630CSi at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $4.04 to $267.17, with an average price of $87.44. Our 14 Fuel and Emissions Systems in stock come from 9 trusted brands, so you’re sure to find the right part for your 1977 BMW 630CSi without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1977 BMW 630CSi is always ready to roll. We’re committed to providing you with everything you need to keep your 630CSi in top shape, all in one place. Start shopping confidently below for your 1977 BMW 630CSi!

Best-Selling Air Flow Sensors for 1977 BMW 630CSis

Enhance the driving experience in your BMW with 2 quality Air Flow Sensor components, starting at $4.04.

ACDelco – Multi-Purpose Wire Connector with Leads (Part No.PT2164)

Multi-Purpose Wire Connector with Leads

from

$16.79
ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Rein – Hose Clamp (Part No.Y3063860432RIN)

Hose Clamp

from

$4.04
Hose Clamp

Most Popular 1977 BMW 630CSi Fuel Injectors

Customize your BMW with 3 Fuel Injectors products like Air Flow Meters and Mass Air, Fuel Injectors, and Fuel Injector Seal Kits, all priced under $116.99.

Carquest Premium – Fuel Injector Seal Kit (Part No.AS010)

Fuel Injector Seal Kit

from

$11.49
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:
  • Premium OE quality materials
  • Services one injector
See More

Cardone – Remanufactured Mass Air Flow Sensor (Part No.74-20037)

Remanufactured Mass Air Flow Sensor

from

$116.99
CARDONE Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.

Product Features:
  • 100% re-solder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
  • On-car vehicle validation routines ensure that modules meet all form, fit, durability and performance requirements.
  • All modules are 100% tested with automated computer test equipment to ensure full functionality and reliability.
  • Our sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate feedback to the vehicle┐s engine control management system.
  • Components are rated to handle demanding temperature variations for optimum reliability in every environment.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A213-1125)

Remanufactured Fuel Injector

from

$43.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new O-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

Top Picks for 1977 BMW 630CSi Fuel Tanks

Upgrade BMW 630CSis with top-quality Fuel Tanks parts, including 1 OEM and aftermarket selections for your 1977 model.

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

In-Demand Vacuum Pumps for 1977 BMW 630CSis

Select from 1 premium Vacuum Pumps parts for your 1977 BMW 630CSi.

CRP – Hose – Vacuum (Part No.4L20063207CRP)

Hose - Vacuum

from

$49.50
Hose – Vacuum

Most Sold 1977 BMW 630CSi Fuel Pumps

Explore our best-selling BMW parts for the 1977 630CSi among 7 OEM and aftermarket options starting from $15.99.

Carquest Premium – Fuel Pump Includes Wiring Harness (Part No.E2496044)

Fuel Pump Includes Wiring Harness

from

$151.99
Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

Delphi – Electric Fuel Pump: With Extra Fittings, Insulating Sleeve, Nuts/Washers, Terminal Hardware (Part No.FE0023)

Electric Fuel Pump: With Extra Fittings, Insulating Sleeve, Nuts/Washers, Terminal Hardware

from

$221.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
  • Improved pump performance as a result of Delphi’s innovative design and durability
  • Restores fast pressure performance and system integrity, translating to better pumping through less energy
  • Part is validated, tested and matched to the right vehicle application
  • Lower amperage draws less load on vehicle’s electrical system
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Always replace the fuel strainer when doing a fuel pump repair
See More

Pierburg – Electric Fuel Pump (Part No.E3000422640APG)

Electric Fuel Pump

from

$267.17
PIERBURG Fuel Pumps excel through their highly developed technology, optimum pumping characteristics when hot, and their low noise level. For over 80 years PIERBURG has been a leading manufacturer of fuel pumps for European vehicles

Product Features:
  • Made in Europe – 100% from OE factories and thus OE Standard
  • Optimal hot fuel supply properties and low noise level
  • Online Service and Product Information
  • Provides OE performance and dependability Installation Note: To avoid future warranties clean tank and change fuel filter when installing a new pump
See More

Bosch – Turbine Electric Fuel Pump (Part No.E3000333721BOS)

Turbine Electric Fuel Pump

from

$170.78
Benchmark quality from the worldwide leader in fuel injection technology. Bosch state-of-the-art turbine fuel pumps offer many advantages when compared to older roller-cell and inner-gear pump designs. These pumps offer near silent operation and improved drivability, the core components of this turbine design significantly reduce wear and deliver a longer service life. Bosch Turbine Fuel Pumps are nearly identical in dimension and appearance to the units they replace for a precise fit every time. Plus, application-specific, illustrated step-by-step instructions are included with all Bosch Turbine Fuel Pumps for safe and easy installation. To prevent hot start problems, Bosch includes a non-return valve that maintains system pressure long after the vehicle has been shut off.

Product Features:
  • OE-Equivalent Direct fit for easy installation.
  • OE connections and fittings.
  • Superior turbine pump design that virtually eliminates fuel pulsation.
  • Precision, spin-balanced armature to reduce noise and vibration.
  • Premium carbon brushes, utilizing advanced materials.
  • Noise suppression coil that eliminates radio frequency interference.
  • Illustrated step-by-step instructions are included.
See More

Sangsin – Brake Pad Set (Part No.N1010948758SBC)

Brake Pad Set

from

$105.89
Brake Pad Set

Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)

Fuel Cap Tester Adapter

from

$34.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Carquest Premium – Fuel Cap Tester Adapter (Part No.12410)

Fuel Cap Tester Adapter

from

$15.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

FAQs for 1977 BMW 630CSi Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 1977 BMW 630CSis?

Out of 14 Fuel and Emissions Systems that fit 1977 BMW 630CSis, the following parts are the top sellers:

What’s the price range for 1977 BMW 630CSi Fuel and Emissions Systems?

Fuel and Emissions System prices for the 1977 BMW 630CSi start at $4.04 and go up to $267.17 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 1977 BMW 630CSi?

The average price for Fuel and Emissions Systems for the 1977 BMW 630CSi is $87.44. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other BMW 630CSi model years?

Yes, we currently carry Fuel and Emissions Systems for 1 model years of BMW 630CSis between 1978 and 1978. Fuel and Emissions Systems are bought most frequently for the following model years: 1978.

What are the cheapest Fuel and Emissions Systems for my 1977 BMW 630CSi?

The cheapest 1977 BMW 630CSi Fuel and Emissions Systems we carry in stock are:

What types of Fuel and Emissions Systems do you sell for my 1977 BMW 630CSi?

Can I get help with 1977 BMW 630CSi Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Fuel and Emissions Systems and more.

What is your return policy for BMW 630CSi Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new BMW 630CSi Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.