1976 Volvo 262 Transmission Parts
More 1976 Volvo 262 Transmission Parts Categories
If you’re looking for an original Transmission Parts replacement for a 1976 Volvo 262, you can search through our selection below. You’ll also find aftermarket and OEM Transmission Parts to meet your needs.
Essential 1976 Volvo 262 Transmission Parts
Permatex – Ultra Grey RTV Silicone Gasket Maker, 3 OZ (Part No.82194)
from
$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)
from
$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.
Product Features:
See More
Product Features:
- Transmission cooler reinstallation kit
- Contains part numbers 248001, 226201, 240250 and 4 hose clamps
- Provides all hardware for reinstallation of Imperial transmission coolers
- Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
National – Bearings (Part No.M86610)
from
$9.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Professional Parts Sweden – AT Shift Linkage Bus (Part No.J4070390128PPS)
from
$2.94
AT Shift Linkage Bus
Felpro – Transmission Oil Pan Gasket (Part No.TOS 18646)
from
$9.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
FAG – AT Idler Gear Bearin (Part No.J261327798FAG)
from
$18.22
AT Idler Gear Bearin
National – Shaft Repair Sleeve (Part No.99169)
from
$24.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Imperial – Plate and Fin Style Trans Cooler 3/4" x 5-7/8" x 11" Light Duty (Part No.243006)
from
$59.99
Product Features:
See More
- Imperial Rapid-Cool« plate and fin transmission cooler
- Size: 3/4″ x 11″ x 6″
- Sub-compact to compact cars
- GVWR up to 18,000 lbs.
- Compatible with OEM cooler systems
Driveworks – Ball Bearing (Part No.S-107-DD)
from
$4.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
MTC – Shifter Boot (Part No.J107545003MTC)
from
$18.12
MTC develops and manufactures high quality OE specified polyurethane mounts, bushings and undercar components to the spare parts industry.
See More
National – Bearings (Part No.A-14)
from
$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Seal (Part No.710714)
from
$10.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design Type: Spring Loaded; Multi-Lip
- Provides good low temperature capability
- Low swell in hydrocarbon fluids
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers reliable performance for every type of repair
National – Multi Purpose Seal (Part No.311189)
from
$9.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Taper Bearing Cone (Part No.LM501349)
from
$17.99
Manufactured with premium-grade steel, National® taper bearing cones feature crowned raceways and rollers to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN — Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
MTC – Shifter Bushing (Part No.J117536107MTC)
from
$2.36
MTC develops and manufactures high quality OE specified polyurethane mounts, bushings and undercar components to the spare parts industry.
See More
Professional Parts Sweden – Extension Hsng. Bush (Part No.J5101389743PPS)
from
$20.41
Problems with the installation of this part are usually due to failure to follow proper repair procedures. Use only a bushing extractor (NEVER A CHISEL!!!) to remove the old bushing. Measure the inside diameter of the housing (it should be 0.004″-0.005″ smaller that the O/D of the bush for proper crush). Gently use a brake cylinder hone to enlarge the housing I/D if necessary. Install the new bushing only with the proper bushing driver!
See More
Koyo – Automatic Transmission Seal (Part No.J507048821KOY)
from
$15.23
Automatic Transmission Seal
FAE – Backup Light Switch (Part No.P3006947429FAE)
from
$46.90
The FAE aftermarket Backup Light Switch is the ideal high quality replacement for your vehicle. The backup Light Switch activates your reverse lights when your vehicle is in reverse. This aftermarket replacement backup light switch is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Carquest – Back Up Light Switch (Part No.S9107)
from
$46.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
Anchor – Transmission Mount: Rear, 1 Piece (Part No.8800)
from
$39.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to VOLVO 76-90;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1976-1990
- Weight approx: 1 Lbs
Anchor – Transmission Mount: Rear, 1 Piece (Part No.2428)
from
$9.49
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to VOLVO 75-93;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1975-1993
- Weight approx: 1 Lbs
MTC – AT Pan Drain Plug (Part No.J503284509MTC)
from
$2.45
AT Pan Drain Plug
Popular 1976 Volvo 262 Transmission Parts Categories
1976 Volvo 262 Transmission Parts
You count on your 1976 Volvo 262 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Transmission Parts. With 32 Transmission Parts ranging in price from $2.36 to $85.99, you’re sure to find everything you need for your 1976 Volvo 262.
Brands matter. If you want to shop a specific Transmission Parts brand, we stock 12 different brands like Imperial, Permatex, and National. 1976 Volvo 262 Transmission Parts start as low as $2.36!
One of the best ways to find top quality OEM or aftermarket Transmission Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 268 extensive product reviews on 1976 Volvo 262 Transmission Parts. Some of the top-rated Transmission Parts products we carry are Shifter Boot with 4.6 stars and Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty with 4.5 stars.
Did we mention you can order your Transmission Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Transmission Parts inventory for your 1976 Volvo 262 below to get started!
Top-Rated Transmission Parts Brands For Your 1976 Volvo 262
Trusted Transmission Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1976 Volvo 262 running right for years to come. In our inventory you’ll find brands like Imperial, Permatex, National, and even more.
Popular Permatex Transmission Parts
You’ll find popular Permatex brand products across Automatic Transmission Pan and Gaskets. All are waiting to get your 1976 Volvo 262 back on the road. Some of the top-rated Permatex products in these categories are:
Top-Rated Imperial Transmission Parts
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Transmission Parts for your 1976 Volvo 262, and some of our most reviewed Imperial parts include:
FAQs for 1976 Volvo 262 Transmission Parts
What are the most purchased Transmission Parts for the 1976 Volvo 262?
Out of 32 Transmission Parts for the 1976 Volvo 262, the most popular in our inventory are:
What are the top-rated 1976 Volvo 262 Transmission Parts?
Top-rated Transmission Parts for your 1976 Volvo 262 based on customer reviews/ratings are:
from
$80.99
(8)
Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty
“Used this cooler to replace the missing factory one on my Polaris 330 ATV. Made an adapter plate to fit to the fan housing. Works great, beats the $30”
from
$73.99
(7)
Maxi-Kool® XL Transmission Oil Cooler
“this transmission oil cooler is replacing my one on my 2000 dodge dakota its priced right mid size and easy to put in the ome one is 250 this is 60 an”
