1976 Volkswagen Beetle Brake Parts

Name: Remanufactured Brake Master Cylinder
Brand: Wearever
SKU: 11-2874
Price: 92.99 USD
Rating: 3.5 (3 reviews)

Below you will find various in-demand Volkswagen Brake Parts, components and accessories for your 1976 Beetle. Advance Auto Parts has popular Beetle parts like Brake Hoses, Brake Rotors and Drums, Brake Pads and Shoes and more. You’ll also find aftermarket and OEM Brake Parts for other Beetle model years including 2010, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 and more. Select a category of 1976 Volkswagen Beetle Brake Parts below and start saving instantly.

Popular 1976 Volkswagen Beetle Brake Parts Categories

Front Brake Pads and Shoes

Rear Brake Drums

Brake Wheel Cylinders

Brake Master Cylinders

Brake Hoses

Brake Hardware Kits

Hold Down Spring Top Cup

Brake Light Fail Switches

Brake Fluid Reservoir Grommets

Essential Brake Parts for 1976 Volkswagen Beetles

from

$92.99

Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders.

Product Features:

Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
Plastic reservoirs are vacuum-tested to ensure they are leak free.

from

$173.81

FAG supplies master cylinder brake actuation systems featuring quality and performance.

Product Features:

High efficiency
Low pressure differential between primary and secondary circuits
Good bleedability
Cr6-free surfaces for vehicles built from July 2007 (as required by law)
Central valve version suitable for ABS

from

$8.75

Brake M/C Reservoir

from

$38.99

Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:

Dependable stopping power
Singler layer shim for quiet braking
OE-designed slots and chamfers to reduce noise and vibration
Powder-coated backing plate prevents corrosion

from

$165.99

For over 25 years Hawk Performance has been producing premium friction products that stop you faster and last longer. Whether you are looking to cut seconds off of your track time, need additional stopping power for your large vehicle, want a product that is cleaner and quieter or, just don’t want to have to think about brakes and rotors, Hawk Performance has the products to keep you safer. We leverage our experience on the track and the technology used in aerospace and the military to make the best brake pads and rotors for all of your vehicle’s needs. Our extensive Research & Development department, including a PhD in friction and 23 dynamometers, allows us to produce first class products in the USA.

Product Features:

Extremely quiet
Ultra-low dust
Improved stopping power
Gentle on rotors for extended pad life
Stable friction output
All Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron/Metal rotors.

from

$41.99

The Z17 Evolution Ceramic Brake Pad and Hardware set is a stock replacement brake pad set for your daily driven vehicle. The ceramic pads’ low-dust formula is validated through on-vehicle 3rd party tests in the USA to keep your wheels looking like new. The pads also feature dual-layer high-temperature rubberized shims that insulate noise for virtually silent braking. If you’re looking to refresh the look and braking performance of your old, worn-out brakes, look no further. Say hello to a smooth, quiet commute with Z17 Evolution Ceramic Brake Pads.

Product Features:

PowerStop Z17 Evolution Clean Ride Ceramic brake pads are engineered for noise free braking
Z17 Evolution brake pads are manufactured under TS16949 standards to OEM specifications including chamfers and slots
The pad surfaces are thermal scorched for fast break-in
Includes premium stainless-steel hardware for hassle free installation
Includes Premium hardware for easy installation

from

$3.79

The brake hardware should be inspected and replaced regularly to ensure reliable, efficient performance. The hold down spring top cups are designed to provide direct and simple replacement.

Product Features:

This part matches Original Equipment (OE) quality specifications
Fast and efficient replacement
Eliminates heat and corrosion deterioration

from

$29.99

Cylinder casting is constructed from high-quality cast iron or aluminum for long-lasting durability

Product Features:

All rubber parts are of high-quality EPDM compound for resistance to DOT3 or DOT4 brake fluid
Key components like spring are from high and stable quality suppliers.
Products are machined by CNC machines with strictly quality control.
Parts assembled in a clean environment and all parts were thoroughly cleaned before assembly.
Manufactured to strict engineering quality standards, meets S.A.E. specifications
Each product is 100% tested on production lines and sampling tested prior to shipment
Key working procedure used CNC, positioning accuracy ± 0.005/300 mm, repeat positioning accuracy + /-0.042 mm
Main cylinder hole of measured by the 0.038 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
Main cylinder hole of measured by the 0.038 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing

from

$29.24

ATE wheel cylinders are made in part from extruded aluminum section and are therefore relatively light, resistant to corrosion and to brake fluid, and provide a longer service life than conventional wheel cylinders. ATE Wheel cylinders are subject to extensive safety testing before being added to the range. Tests of sealing at low and at high pressure and of resistance to wear are included. The production is certified to ISO 1400, and, thanks to our strict internal ATE N standard, they significantly exceed the statutory requirement. The grooved ring cup seals consist of EPDM. The surface protection of the wheel cylinder housing contains no Cr-6, and therefore also satisfies the EU end-of-life vehicle directive.

Product Features:

Resistant to corrosion and to brake fluid
Provides a longer service life
Made with high quality EPDM rubber cups and boots for long lasting performance
Manufactured to OE Quality specifications

from

$20.99

Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:

Wheel cylinders match what was originally installed on the vehicle.
Each cylinder matches OE for form, fit and function and material
Wheel cylinders provide leak-free performance by providing the highest quality resistance to heat, corrosion and leakage
All bleeder screws are coated providing extra protection
Rubber components are manufactured in house using the latest formula EPDM material.
Wheel cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
All casting machining is done by computer programed CNC machines.
Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.

from

$11.99

Hardware consists of a variety of parts designed to assist in restoring your brake system such as, Anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Change your hardware with the brake shoes to ensure maximum performance.

Product Features:

Manufactured to restrain high tolerances with quality materials
Increases the Life Span and Improves the Performance of the Drum Brakes
Coated to eliminate heat and corrosion deterioration
Restores brakes to like-new performance
This part matches Original Equipment (OE) quality specifications

from

$16.78

New Brake Hardware – Back to like-new performance The WBR complete disc brake hardware kits provide everything you need to perform a complete the brake job and restore the brake system back to the optimal like new operating condition. Quiet Clip Technology On this application, the caliper abutment clips are provided with a Nitrile polymer coating to dampen or eliminate brake squeal, squeaks and groans. The Nitrile Rubber is an extremely durable compound that reduces the vibration and noise from resonating throughout the caliper. Quiet Clip Technology provides over 95% reduction of caliper bracket noise. Disc hardware can lose 50% of spring tension within 1-2 years, which can cause pads to stick, create uneven pad wear, and lead to unwanted brake noise.

Product Features:

Reduced Brake Noise, comebacks and unsatisfied customers,
Extends the life of a brake job,
Improved fuel mileage, and
Restores brakes to like new Performance. Effects of Corrosion, Heat, Stress, Use Rust and Corrosion on floating caliper slides or bushings can prevent the caliper from centering properly, which can
reduce effective braking force
cause uneven pad wear, and brake noise. Rubber Bushings lose there resiliency and become flattened from the torque of the braking system which can
cause excessive caliper movement
cause unwanted noise like rattles and thumps.

from

$7.29

Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.

Product Features:

This part matches Original Equipment (OE) quality specifications
Exact fitment and original replacement
New Brake Hardware prevents premature wear and maximizes performance
Helps deliver a quieter, more efficient braking system
Manufactured with quality materials to suppress high stress levels

from

$135.55

The Zimmermann brake drum is an OE-Quality replacement and is an original equipment supplier to many European automotive manufacturers.

Product Features:

OE-Equivalent and Direct fit Application
Made exclusively of high-grade cast iron
Immediate functional capability without removal of the coating before mounting
German production meeting the requirements of actual Quality Management Systems
Well known, highest Otto-Zimmermann-Product-Quality
Significant improvement in appearance
Corrosion protection during storage and installation
Ready to mount: the coating in the hub is as thin as possible
Immediate and full functionality

from

$25.04

The FAE Stop Light Switch is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$22.99

Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:

Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
Tensile minimum load holds up to 1800 N
All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
Brand may vary by location

from

$35.99

Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
Tensile minimum load holds up to 1800 N
All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
Brand may vary by location

from

$17.99

This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:

Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
Quality assured – materials tested to exacting government-regulated safety and durability standards
Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings

from

$32.99

Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
Tensile minimum load holds up to 1800 N
All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation

from

$14.08

All WBR hydraulic hoses are manufactured to match the exact OE fit, OE construction, to ensure quick and easy installation, as well as trouble-free functionality for the life of the hose. WBR brake hoses are suitable for all brake fluids (DOT 3, DOT 4, DOT 4 LV, DOT 5.1)

Product Features:

Excellent pulse strength for use on vehicles with ESP, ABS, DSC and ASR
Very high ozone resistance, temperature change resistance and so a long service life
Low water permeation and so extended service life of the brake fluid
Use of robust hose valve connections and additional safety and shrink-fitted hoses in various materials.

from

$22.99

Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
Quality assured – materials tested to exacting government-regulated safety and durability standards
Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings

from

$39.99

Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
Quality assured – materials tested to exacting government-regulated safety and durability standards
Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
Brand may vary by location

from

$23.99

Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
Tensile minimum load holds up to 1800 N
All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
Brand may vary by location

from

$24.79

Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
Tensile minimum load holds up to 1800 N
All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
Brand may vary by location

from

$42.99

Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
Tensile minimum load holds up to 1800 N
All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
Brand may vary by location

from

$60.99

Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
Quality assured – materials tested to exacting government-regulated safety and durability standards
Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
Brand may vary by location

from

$62.99

Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
Quality assured – materials tested to exacting government-regulated safety and durability standards
Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
Brand may vary by location

Upgrade your 1976 Volkswagen Beetle with Top-Quality Brake Parts

When it comes to maintaining or upgrading your 1976 Volkswagen Beetle, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Volkswagen or enhancing its overall performance, Brake Parts are key to keeping your Beetle functioning at its best. At Advance Auto Parts, we offer a wide selection of 19 Brake Parts for the 1976 Volkswagen Beetle, designed to meet your needs without breaking the bank. From Brake Hose replacements to Brake Rotors and Drums upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Brake Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Brake Parts for your 1976 Volkswagen Beetle at great prices. Our Brake Parts inventory for this model ranges from just $3.79 to $187.89, with an average price of $44.20. Our 19 Brake Parts in stock come from 9 trusted brands, so you’re sure to find the right part for your 1976 Volkswagen Beetle without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1976 Volkswagen Beetle, we stock popular OEM and aftermarket Brake Parts from top names like Carquest, and more. Carquest Brake Parts start at just $3.79 and boast an impressive 4 stars average rating from customers. With 12 customer reviews and counting, our 1976 Volkswagen Beetle Brake Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Brake Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1976 Volkswagen Beetle is always ready to roll. We’re committed to providing you with everything you need to keep your Beetle in top shape, all in one place. Start shopping confidently below for your 1976 Volkswagen Beetle!

Best-Selling Brake Hoses for 1976 Volkswagen Beetles

Enhance the driving experience in your Volkswagen with 3 quality Brake Hose components, starting at $14.08.

show more show less

from

$22.99

Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
Tensile minimum load holds up to 1800 N
All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
Brand may vary by location

from

$17.99

Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
Quality assured – materials tested to exacting government-regulated safety and durability standards
Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings

from

$14.08

Excellent pulse strength for use on vehicles with ESP, ABS, DSC and ASR
Very high ozone resistance, temperature change resistance and so a long service life
Low water permeation and so extended service life of the brake fluid
Use of robust hose valve connections and additional safety and shrink-fitted hoses in various materials.

Top Picks for 1976 Volkswagen Beetle Brake Pads and Shoes

Upgrade Volkswagen Beetles with top-quality Brake Pads and Shoes parts, including 2 OEM and aftermarket selections for your 1976 model.

show more show less

from

$35.99

Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:

Wearever Brake Shoes come bonded or riveted based on OE design.
Wearever Brake Shoes are coated to prevent rust.
Wearever Brake Shoes are 100% New not remanufactured.
Brand may vary by location

from

$15.00

Dependable stopping power
Single layer shim for quiet braking
OE-designed slots and chamfers to reduce noise and vibration

In-Demand Wheel Cylinders for 1976 Volkswagen Beetles

Select from 5 premium Wheel Cylinders parts for your 1976 Volkswagen Beetle, with prices ranging from $19.54 to $29.24.

show more show less

from

$20.99

Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:

Wheel cylinders match what was originally installed on the vehicle.
Each cylinder matches OE for form, fit and function and material
Wheel cylinders provide leak-free performance by providing the highest quality resistance to heat, corrosion and leakage
All bleeder screws are coated providing extra protection
Rubber components are manufactured in house using the latest formula EPDM material.
Wheel cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
All casting machining is done by computer programed CNC machines.
Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.

from

$20.99

Cylinder casting is constructed from high-quality cast iron or aluminum for long-lasting durability

Product Features:

All rubber parts are of high-quality EPDM compound for resistance to DOT3 or DOT4 brake fluid
Key components like spring are from high and stable quality suppliers.
Products are machined by CNC machines with strictly quality control.
Parts assembled in a clean environment and all parts were thoroughly cleaned before assembly.
Manufactured to strict engineering quality standards, meets S.A.E. specifications
Each product is 100% tested on production lines and sampling tested prior to shipment
Key working procedure used CNC, positioning accuracy ± 0.005/300 mm, repeat positioning accuracy + /-0.042 mm
Main cylinder hole of measured by the 0.038 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
Main cylinder hole of measured by the 0.038 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing

from

$29.24

Resistant to corrosion and to brake fluid
Provides a longer service life
Made with high quality EPDM rubber cups and boots for long lasting performance
Manufactured to OE Quality specifications

from

$28.74

Resistant to corrosion and to brake fluid
Provides a longer service life
Made with high quality EPDM rubber cups and boots for long lasting performance
Manufactured to OE Quality specifications

from

$19.54

Wheel Cylinder

Most Sold 1976 Volkswagen Beetle Brake Kits

Explore our best-selling Volkswagen parts for the 1976 Beetle among 2 OEM and aftermarket options starting from $11.49.

show more show less

from

$11.49

Manufactured to restrain high tolerances with quality materials
Increases the Life Span and Improves the Performance of the Drum Brakes
Coated to eliminate heat and corrosion deterioration
Restores brakes to like-new performance
This part matches Original Equipment (OE) quality specifications

from

$11.99

Manufactured to restrain high tolerances with quality materials
Increases the Life Span and Improves the Performance of the Drum Brakes
Coated to eliminate heat and corrosion deterioration
Restores brakes to like-new performance
This part matches Original Equipment (OE) quality specifications

Top-Rated Brake Parts Brands For Your 1976 Volkswagen Beetle

Shop for the best-rated brands offering Brake Parts and other products for your 1976 Volkswagen Beetles. Below you’ll find some of our best rated Brake Parts from Carquest, and more. Brake Parts from these brands that fit a 1976 Beetle start at just $3.79 and are rated as high as 4 stars. OEM and aftermarket Brake Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest 1976 Volkswagen Beetle Brake Parts

When it comes to maintaining or upgrading your 1976 Volkswagen Beetle, using quality Brake Parts is essential to ensure durability and a perfect fit. Carquest ticks all of those boxes. We offer a wide selection of Carquest Brake Parts, specifically designed for the 1976 Volkswagen Beetle. With over 10 Carquest brand Brake Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $3.79, with an average price of just $21.72. Plus, with over 12 customer reviews and an average rating of 4 stars, you can trust that our Carquest Brake Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$11.99

This product is not rated

Drum Brake Hardware Combi-Kit

“”

from
$17.99

This product is not rated

Brake Hose Assembly

“”

from
$11.49

This product is not rated

Drum Brake Hardware Combi-Kit

“”

FAQs for 1976 Volkswagen Beetle Brake Parts

Which Brake Parts are best-sellers for 1976 Volkswagen Beetles?

Out of 19 Brake Parts that fit 1976 Volkswagen Beetles, the following parts are the top sellers:

Drum Brake Hardware Combi-Kit (5310954) – $11.49
Coated Brake Drum (10762920) – $135.55
Drum Brake Hardware Combi-Kit (3550028) – $11.99

What’s the price range for 1976 Volkswagen Beetle Brake Parts?

Brake Part prices for the 1976 Volkswagen Beetle start at $3.79 and go up to $187.89 for the most premium parts.

What’s the average price of a Brake Part for a 1976 Volkswagen Beetle?

The average price for Brake Parts for the 1976 Volkswagen Beetle is $44.20. Keep in mind the variety of part types within our Brake Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Brake Parts for other Volkswagen Beetle model years?

Yes, we currently carry Brake Parts for 50 model years of Volkswagen Beetles between 1950 and 2019. Brake Parts are bought most frequently for the following model years: 2019, 2018, 2017, 2016, 2015, 2014, 2013, 2012, and 2010.

What are the cheapest Brake Parts for my 1976 Volkswagen Beetle?

The cheapest 1976 Volkswagen Beetle Brake Parts we carry in stock are:

Brake Hold-Down Spring Cup (5310075) – $3.79
Brake M/C Reservoir (11868106) – $8.75
Drum Brake Hardware Combi-Kit (5310954) – $11.49
Drum Brake Hardware Combi-Kit (3550028) – $11.99
WBR Brake Hose (10800338) – $14.08

What are the top-rated Brake Parts that fit the 1976 Volkswagen Beetle?

Out of 12 reviews by customers, our 1976 Volkswagen Beetle Brake Parts have an average customer rating of . These are some of the highest-rated Brake Part types for the 1976 Volkswagen Beetle and their top-rated products:

Wheel Cylinders
- Drum Brake Wheel Cylinder (5660882) – $20.99
- Drum Brake Wheel Cylinder (5660874) – $20.99

What types of Brake Parts do you sell for my 1976 Volkswagen Beetle?

As of 2/5/25, these are some of the most in-demand types of Brake Parts for a 1976 Volkswagen Beetle:

Can I get help with 1976 Volkswagen Beetle Brake Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Volkswagen Brake Parts and more.

What is your return policy for Volkswagen Beetle Brake Parts?

Advance Auto Parts keeps returns simple. For new Volkswagen Beetle Brake Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1976 Volkswagen Beetle Brake Parts

Wearever – Remanufactured Brake Master Cylinder (Part No.11-2874)

FAG – FAG Brake Master Cylinder (Part No.N300015068FAG)

ATE Premium One – Brake M/C Reservoir (Part No.N301711738ATE)

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD768)

Hawk Performance – Performance Ceramic Disc Brake Pads (Part No.HB543Z.760)

PowerStop – Z17 Evolution Ceramic Brake Pads with Hardware (Part No.17-768)

Carquest Wearever – Brake Hold-Down Spring Cup (Part No.1133-2)

Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA90550)

ATE – ATE, Wheel Cylinder (Part No.N202017029ATE)

Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA93356)

Carquest Wearever – Drum Brake Hardware Combi-Kit (Part No.17162)

WBR – Disc Brake Hardware Pro-Kit (Part No.N1061460582WBR)

Carquest Wearever – Disc Brake Hardware Kit (Part No.8212A)

Otto Zimmermann – Coated Brake Drum (Part No.N200015054ZIM)

FAE – FAE Stop Light Switch (Part No.P305515117FAE)

Carquest Wearever – BRAKE HOSE (Part No.BHA93120)

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA620001)

Carquest Wearever – Brake Hose Assembly (Part No.BHA96350)

Carquest Wearever – BRAKE HOSE (Part No.BHA620969)

World Brake Resources – WBR Brake Hose (Part No.N700054847WBR)

Carquest Wearever – Brake Hydraulic Hose (Part No.BHA27298)

Carquest Wearever – Brake Hydraulic Hose (Part No.BHA622017)

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA27301)

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA93105)

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA620210)

Carquest Wearever – Brake Hydraulic Hose (Part No.BHA621174)

Carquest Wearever – Brake Hydraulic Hose (Part No.BHA621173)

Carquest Wearever – BRAKE HOSE (Part No.BHA93120)

Carquest Wearever – Brake Hose Assembly (Part No.BHA96350)

World Brake Resources – WBR Brake Hose (Part No.N700054847WBR)

Otto Zimmermann – Coated Brake Drum (Part No.N200015054ZIM)

Carquest Wearever – Brake Shoes (Part No.S315)

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.NAD88)

Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA93356)

Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA90549)

ATE – ATE, Wheel Cylinder (Part No.N202017029ATE)

ATE – ATE Wheel Cylinder (Part No.N202025508ATE)

Autopart International Inc – Wheel Cylinder (Part No.N20201998527API)

Carquest Wearever – Drum Brake Hardware Combi-Kit (Part No.17163)

Carquest Wearever – Drum Brake Hardware Combi-Kit (Part No.17162)