1976 GMC G15 Camshafts
More 1976 GMC G15 Camshafts
Find your specific 1976 GMC G15 original or aftermarket Camshafts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1976 GMC G15 Camshafts
Mr. Gasket – Advance And Retard Cam Bushings (Part No.85B)
from
$35.99
With Mr. Gasket cam degree bushings you fine tune the camshaft timing of your engine to as little as 1 degree. Even aftermarket timing sets with multiple keyways can’t give the range of adjustment these bushings allow. Retard your camshaft to lower the powerband for more low end torque and midrange horsepower, or advance for more top end power. This kit does odd number adjustment 0-7 degrees.
Product Features:
See More
Product Features:
- Advance the cam for increased torque and horsepower
- Tune your powerband for more end torque or increase top end horsepower
- Includes (4) offset bushings and (1) 0 degree bushing
- Cam sprocket dowel pin hole must be drilled to .406¿ (13/32¿) dia.
- Cam sprocket dowel pin hole must be drilled to .406┐ (13/32┐) dia.
- Increase Top-End Horsepower
Mr. Gasket – Advance And Retard Cam Bushings (Part No.85)
from
$42.49
With Mr. Gasket cam degree bushings you fine tune the camshaft timing of your engine to as little as 1 degree. Even aftermarket timing sets with multiple keyways can’t give the range of adjustment these bushings allow. Retard your camshaft to lower the powerband for more low end torque and midrange horsepower, or advance for more top end power. This kit does even number adjustment 0-8 degrees.
Product Features:
See More
Product Features:
- Advance the cam for increased torque and horsepower
- Tune your powerband for more end torque or increase top end horsepower
- Includes (4) offset bushings and (1) 0 degree bushing
- Cam sprocket dowel pin hole must be drilled to .406¿ (13/32¿) dia.
- Cam sprocket dowel pin hole must be drilled to .406┐ (13/32┐) dia.
- Increase Top-End Horsepower
Sealed Power – Engine Camshaft Bearing Set (Part No.1750M)
from
$60.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Competition Cams – CAMSHAFT, SBC 291 MUTHA THUMPR HYDRAULIC ROLLER 1 EA (Part No.12-601-8)
from
$522.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods, the Thumpr series’ early i
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Competition Cams – CAMSHAFT, SBC 284 XTREME ENERGY HYDRAULIC 1 EA (Part No.12-250-3)
from
$258.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Sealed Power – Performance Camshaft (Part No.CS-1106R)
from
$179.99
Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components
Product Features:
See More
Product Features:
- Reliable performance with significant power increase vs stock
- Good low-end torque
- Recommended for tow vehicle, street rod or muscle car
- Power range: 1000-3500rpm
- Idle: stock
- Cruise: 1600-2200rpm
Competition Cams – Xtreme Energy 236/242 Hydraulic Roller Cam and Lifter Kit Chevrolet Small Block (Part No.CL12-433-8)
from
$1097.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Edelbrock – Performer-Plus Camshaft Kit for Small-Block Chevy 283-400 V8 (Part No.7102)
from
$366.99Product Features:
- Designed for 1500 to 6500 Performance
- Maximum Power in High-RPM with Good Low-End Torque
- Matched to Edelbrock Performer RPM Intakes
- 10 to 12 in. of Manifold Vacuum at Idle
- More Lift and Duration than Most Street Camshafts
- Includes Hydraulic Lifters and Assembly Lube
- Dyno Matched/Street Proven Performance
- Take The Guesswork Out Of Camshaft Selection
Competition Cams – High Energy 206/206 Hydraulic Flat Cam K-Kit for Chevrolet Small Block (Part No.K12-205-2)
from
$1482.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications. Offering
Product Features:
See More
Product Features:
- Good blend of efficiency and performance.
- Perfect choice for performance street rebuilds.
- Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
Mr. Gasket – Cam Button Spacer (Part No.1183)
from
$14.99
These Mr. Gasket cam buttons are an absolute necessity for roller cam installations and useful to maintain accuracy in any cam installation. Cam buttons keep the camshaft from moving in and out and causing erratic timing. A camshaft button, or camshaft thrust bumper installs into the hole in the front end of the camshaft and prevents camshaft walk in roller camshaft applications. Flat tappet cams are ground with a small angle in the lobes that puts a side load on the camshaft. Without this a camshaft has a natural tendency to move or walk, out of the block when rotating. Roller cam lobes can’t be ground that way so engines originally equipped that way usually use a retainer plate to secure them. The camshaft button serves the same purpose, but it does so by contacting the timing cover to prevent further movement. A worn or missing cam thrust bumper will result in too much end play, resulting in timing issues.
Product Features:
See More
Product Features:
- Mandatory to prevent cam walk in roller cam conversions
- Helps maintain accurate timing
- Made from aluminum
Cloyes Performance – Engine Camshaft Thrust Button (Part No.9-202)
from
$34.99
All Components are Heat-Treated Steel. Needle Roller Bearing for a Fully Rollerized Operation. 0.640″ Long, Used with Later Sheet Metal Covers.
Product Features:
See More
Product Features:
- All Components are Heat-Treated Steel
- Needle Roller Bearing for a Fully Rollerized Operation
- Used with Later Sheet Metal Covers.
Cloyes Performance – Engine Camshaft Thrust Button (Part No.9-200)
from
$27.99
All Components are Heat-Treated Steel. Needle Roller Bearing for a Fully Rollerized Operation. 0.925″ Long, Used with Old Style 3-Spoke Sheet Metal Covers.
Product Features:
See More
Product Features:
- All components are Heat-Treated Steel
- Needle Roller Bearing
- Fully Rollerized Operation.
Cloyes Performance – Engine Camshaft Bushing (Part No.P9005)
from
$24.99
Replacement Hex-A-Just Billet Steel Camshaft Dowel Eccentric Bushing; 100% USA Made; Meets or exceeds OEM performance requirements; Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience.
Product Features:
See More
Product Features:
- Replacement Hex-A-Just Billet Steel Camshaft Dowel Eccentric Bushing
- 100% USA Made
- Meets or exceeds OEM performance requirements
- Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience.
Cloyes Performance – Engine Camshaft Thrust Plate (Part No.9-220B)
from
$18.99
0.150″ Thick. Bronze Thrust Washer.
Product Features:
See More
Product Features:
- 0.150″ Thick
- Bronze Thrust Washer.
National – Shaft Repair Sleeve (Part No.99176)
from
$46.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Mr. Gasket – Special Cam Bolt (Part No.944G)
from
$12.99
These Mr. Gasket cam bolt kits feature specially hardened bolts to keep the cam button secure so the cam won’t walk out of place. Can also be used as original equipment replacement. Includes three 5/16 inch-18 x 3/4 inch Long Grade 5 Bolts with Black Oxide Finish.
Product Features:
See More
Product Features:
- Black oxide coated Grade 5 steel
- Includes flat washers to secure Mr. Gasket cam buttons 1180, 1181 and 1183
- Can be used as OE replacement
Mr. Gasket – Cam Bolt Lock Plate Kit (Part No.948G)
from
$18.09
Mr. Gasket cam locking plates feature a steel retainer plate designed to secure the cam gear bolts from coming loose and backing out, preventing costly engine damage. Retainer plate fits under bolt heads allowing tabs to be bent against hex head flats creating a secure positive lock.
Product Features:
See More
Product Features:
- Black oxide finished steel
- Includes (3) grade 5 bolts & locking plate
- Fits Chevrolet Small and Big Block without OE roller cam
- Tabs bend up around bolt head to secure
Dorman – Steel Cup Expansion Plug 1-5/8 In., Height 0.500 (sold by each) (Part No.555-030)
from
$1.49
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Steel Cup Expansion Plug 1-5/8 In., Height 0.500 (Part No.555-030.1)
from
$2.79
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Steel Cup Expansion Plug 2-7/64 In., Height 0.310 (sold by each) (Part No.555-080)
from
$2.49
This engine camshaft plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Steel Cup Expansion Plug 2-3/32 In., Height 0.530 (sold by each) (Part No.555-085)
from
$2.29
This engine camshaft plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Pik-a-Nut – Steel Cup Expansion Plug 2-3/32 In., SC, Height 0.278 (Part No.362566.1)
from
$2.29
This engine camshaft plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Steel Cup Expansion Plug 2-3/32 In., SC, Height 0.278 (sold by each) (Part No.555-049)
from
$2.29
This engine camshaft plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Popular 1976 GMC G15 Camshafts Categories
1976 GMC G15 Camshafts
Maybe you’re in the middle of a full rebuild of that 1976 GMC G15. Maybe you just need a couple of Camshafts. Either way, Advance Auto Parts has 40 different Camshafts in our inventory ranging from $1.49 to $1,566.99. That means you can find the exact parts or products you need to keep that 1976 GMC G15 running smoothly.
Camshafts are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 1976 GMC G15. Dorman, Sealed Power, and Mr. Gasket are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Camshafts for your 1976 GMC G15, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 46 reviews in this category, some of the top rated parts include CAM AND LIFTER KIT, SBC 252 HIGH ENERGY HYDRAULIC 1 EA with 1.0 stars.
So if you’re in the market for aftermarket Camshafts to keep your 1976 GMC G15 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Camshafts Brands To Make Your 1976 GMC G15 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1976 GMC G15 demands trusted brand parts and products to keep it running. Many trusted brands of Camshafts make up Advance Auto Parts’ inventory, and all are ready to help make your G15 the best it can be. Be sure to browse some of our top Camshafts brands and parts.
Popular Mr. Gasket Camshafts
We carry Mr. Gasket parts in our stock across Engine Camshaft Bolts categories, plus more. For a 1976 GMC G15, our most popular Mr. Gasket Camshafts include:
Top 1976 GMC G15 Camshafts from Edelbrock
Edelbrock products are another trusted brand when it comes to Camshafts for your 1976 GMC G15. Popular Edelbrock parts include:
from
$287.99
(4)
Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet
Camshaft and Lifter Kits
from
$334.99
(1)
Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet
Camshaft and Lifter Kits
FAQs for 1976 GMC G15 Camshafts
What are the most purchased Camshafts for the 1976 GMC G15?
Out of 40 Camshafts for the 1976 GMC G15, the most popular in our inventory are:
from
$1.49
This product is not rated
Steel Cup Expansion Plug 1-5/8 In., Height 0.500 (sold by each)
Camshaft Plugs
from
$2.29
This product is not rated
Steel Cup Expansion Plug 2-3/32 In., SC, Height 0.278
Camshaft Plugs
What are the top-rated 1976 GMC G15 Camshafts?
Top-rated Camshafts for your 1976 GMC G15 based on customer reviews/ratings are:
from
$1257.99
(1)
CAM AND LIFTER KIT, SBC 252 HIGH ENERGY HYDRAULIC 1 EA
“Front window close fit but not perfect. Doesn’t allow windows to close properly. Rear window shade didn’t fit at all. Expected much better fit for the”
