1976 Dodge B200 Differentials

Essential 1976 Dodge B200 Differentials

Yukon Gear – Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement (Part No.33249)

Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement

from

$8.99
Product Features:
  • Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
  • For Trac Loc positraction applications only
See More

Yukon Gear – Full-Floating, Blank 35 Spline Diameter, Non-Drilled Axle Shaft For Dana 60 (Part No.21005)

Full-Floating, Blank 35 Spline Diameter, Non-Drilled Axle Shaft For Dana 60

from

$232.99
Full-floating, 35 spline diameter, non-drilled blank axle shaft for Dana 60. 40″ inches long. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H axles come with a one year warranty against manufacturing defects.
See More

Felpro – DIFFERENTIAL GASKET (Part No.RDS 55047)

DIFFERENTIAL GASKET

from

$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Standard Open Notched Cross Pin Shaft For 9.25" Chrysler (Part No.33309)

Standard Open Notched Cross Pin Shaft For 9.25" Chrysler

from

$84.99
Standard Open notched cross pin shaft for 9.25″ Chrysler.

Product Features:
  • Cross pin shaft
  • Fits Chrysler 9.25″
  • Standard open carrier only
  • Notched
See More

Yukon Gear – Standard Open Spider Gear Kit For 9.25" Chrysler With 31 Spline Axles (Part No.16004)

Standard Open Spider Gear Kit For 9.25" Chrysler With 31 Spline Axles

from

$333.99
Yukon standard open spider gear kit for 9.25″ Chrysler with 31 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fit Chrysler 9.25″ rear with open differential
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

USA Standard Gear – Spartan Locker Replacement Cross Pin For Dana 60 (Part No.17019)

Spartan Locker Replacement Cross Pin For Dana 60

from

$52.99
Product Features:
  • USA Standard Gear heavy-duty cross pin shaft
  • Fits Dana Spicer 60
  • Works with Spartan Locker or standard open spider gears
See More

Yukon Gear – Minor Install Kit For Dana 60 And 61 Differential (Part No.12026)

Minor Install Kit For Dana 60 And 61 Differential

from

$151.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:
  • Fits Dana Spicer 60 rear
  • Included are a pinion seal, crush sleeve , complete shim kit, marking compound and brush.
See More

Yukon Gear – Replacement Outer Oil Slinger For Dana 60, 70, 70U & 70HD (Part No.33019)

Replacement Outer Oil Slinger For Dana 60, 70, 70U & 70HD

from

$5.99
Product Features:
  • Outer oil slinger for Dana Spicer 60, 70, 70U and 70HD
See More

Yukon Gear – Differential Side Bearing Screw Adjuster For 9.25" Chrysler (Part No.33256)

Differential Side Bearing Screw Adjuster For 9.25" Chrysler

from

$64.99
Differential side bearing screw adjuster for 9.25″ Chrysler.

Product Features:
  • Side adjuster for Chrysler 9.25″ rear
See More

USA Standard Gear – Open Spider Gear Set For Chrysler 9.25", 31 Spline (Part No.39004)

Open Spider Gear Set For Chrysler 9.25", 31 Spline

from

$209.99
Product Features:
  • Fits Chrysler 9.25″ rear with open differential
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)

Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement

from

$3.99
Product Features:
  • Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″
See More

Yukon Gear – 9.25" Chrysler Rear Cover Gasket (Part No.23002)

9.25" Chrysler Rear Cover Gasket

from

$12.99
9.25″ Chrysler rear cover gasket.

Product Features:
  • Cover gasket
  • Fits Chrysler 9.25″ rear
See More

National – Bearings (Part No.M86610)

Bearings

from

$9.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)

Dana 60 & Dana 70 Power Lok Case Bolt

from

$7.99
Dana 60 & Dana 70 Power Lok case bolt.

Product Features:
  • Power Lok case bolt for Dana Spicer 60 and 70
  • 7/16 x 14 thread
  • 3.5″ long
  • 9/16″ hex head
See More

Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)

Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD

from

$37.99
Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.

Product Features:
  • Redi-Sleeve yoke saver
  • Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD
See More

Yukon Gear – Zip Locker For Dana 60 With 30 Spline Axles, 4.56 & Up (Part No.34023)

Zip Locker For Dana 60 With 30 Spline Axles, 4.56 & Up

from

$1487.99
The Yukon Zip Locker is the latest in on-demand traction. Its air-operated design allows you to switch from an open differential to 100% lockup when you need it, giving you the ultimate in driver selectability. The Yukon Zip locker is an air operated locker that provides selectable traction for off road or street use. This unit features 4320 Chrome Moly internals for added strength. Assembled in the USA! compressor sold separately. All Zip Lockers are backed by the best warranty in the business! All Zip Lockers are backed by the best warranty in the business! All Zip Lockers come with a six (6) year warranty, including any collaterally damaged parts and associated labor, up to $2,000, for the first two (2) years. This is a narrow case locker. If you have a wide housing, please order two DS 42563 with your locker. This locker is ABS compatible.

Product Features:
  • Fits Dana Spicer 60 with 30 spline axles
  • 4.56 and up ratio only
  • Forged case and 8620 internals for added strength
  • Works with a variety of air delivery systems
  • Assembled in the USA
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1111)

Differential Pinion Shim Kit

from

$13.99


Product Features:
  • PINION SHIM – DANA 70 ALL
See More

Pro-King – Crush Sleeve (Part No.721A034)

Crush Sleeve

from

$2.89
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Motive Gear – Differential Super Bearing Kit – Koyo (Part No.R9.25RSK)

Differential Super Bearing Kit - Koyo

from

$141.99


Product Features:
  • SUPER KIT-CHRY 9.25(NON-HD)
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

Redline Synthetic "Shock Proof" Oil - 4 Quarts

from

$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil
See More

Yukon Gear – Dana 60 & Dana 61 Tracloc Clutch Set (Part No.16156)

Dana 60 & Dana 61 Tracloc Clutch Set

from

$269.99
Dana 60 & Dana 61 TracLoc clutch set.

Product Features:
  • Clutch kit
  • Fit Dana Spicer 60 Trac Loc positraction
See More

Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80 (Part No.55011)

Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80

from

$13.99
Product Features:
  • Carrier shim kit for Dana Spicer 60, 70, 70HD, 70U and 80
See More

Yukon Gear – Pinion Install Kit For Chrysler 9.25" Differential (Part No.13011)

Pinion Install Kit For Chrysler 9.25" Differential

from

$276.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Chrysler 9.25″ rear
  • Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
See More

Richmond Gear – Differential Gear Install Kit (Part No.83-1041-B)

Differential Gear Install Kit

from

$42.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

Yukon Gear – Seal Housing For Dana 60, Zip Locker, With O-Rings (Part No.34039)

Seal Housing For Dana 60, Zip Locker, With O-Rings

from

$79.99
Seal housing for Dana 60, Zip locker, with o-rings.

Product Features:
  • Seal housing for Dana Spicer 60
  • Includes o-rings
See More

Motive Gear – Differential Ring and Pinion (Part No.D70-456)

Differential Ring and Pinion

from

$235.99


Product Features:
  • DANA-70 R/P 4.56 STD MG .625″ OFFSET
See More

Dorman – Differential Pinion Yoke Assembly (Part No.697-541)

Differential Pinion Yoke Assembly

from

$231.99
A worn or damaged differential pinion flange can lead to driveline vibrations and fluid leaks. This part is designed to match the performance of the original equipment pinion flange on specified vehicles. It has been engineered to help restore a secure and reliable connection between the differential pinion and the drive shaft when the original flange is rusted, worn or damaged. It is made of rugged materials for reliable service and durability.

Product Features:
  • Direct replacement – this differential pinion flange is designed to match the performance of the original equipment flange on specified vehicles.
  • Ideal solution – engineered to help restore a secure and reliable connection between the differential pinion and the drive shaft when the original flange is worn or damaged.
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Forged Replacement Yoke For Dana 60, Stronger Than Billet, With A 1350 U/Joint Size (Part No.41029)

Forged Replacement Yoke For Dana 60, Stronger Than Billet, With A 1350 U/Joint Size

from

$266.99
Yukon forged replacement yoke for Dana 60, stronger than billet, with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 60, 70, 70U and 70HD
  • 29 spline
  • 1350 u-joint size
  • 3.625″ snap ring span
  • 1.188″ cap diameter
  • Outside snap ring design
  • U-bolt style
See More

Popular 1976 Dodge B200 Differentials Categories

1976 Dodge B200 Differentials

Maybe you’re in the middle of a full rebuild of that 1976 Dodge B200. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 269 different Differentials in our inventory ranging from $1.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1976 Dodge B200 running smoothly.

Differentials are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 1976 Dodge B200. FELPRO, Yukon Gear, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1976 Dodge B200, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 1,580 reviews in this category, some of the top rated parts include Differential Carrier Gear Kit with 3.7 stars and Differential Pinion Shim Kit with 5.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1976 Dodge B200 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1976 Dodge B200 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1976 Dodge B200 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your B200 the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Yukon Gear Differentials

We carry Yukon Gear parts in our stock across Differential Cross Pins categories, plus more. For a 1976 Dodge B200, our most popular Yukon Gear Differentials include:
Cross Pin Shaft For Standard Open Chrysler 9.25"
from $46.99
(1)
Cross Pin Shaft For Standard Open Chrysler 9.25"
Differential Cross Pins

Top 1976 Dodge B200 Differentials from Felpro

Felpro products are another trusted brand when it comes to Differentials for your 1976 Dodge B200. Popular Felpro parts include:
Differential Cover Gasket
from $9.49
(34)
Differential Cover Gasket
Rear Differential Cover Gaskets
DIFFERENTIAL GASKET
from $6.79
(21)
DIFFERENTIAL GASKET
Rear Housing Cover Gaskets
Differential Carrier Gasket
from $6.49
(1)
Differential Carrier Gasket
Automatic Transmission Differential Carrier Gaskets

FAQs for 1976 Dodge B200 Differentials

What are the most purchased Differentials for the 1976 Dodge B200?

Out of 269 Differentials for the 1976 Dodge B200, the most popular in our inventory are:
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Bearings
from $23.99
(7)
Bearings
Front Differential Pinion Bearings
Ring Gear Bolt
from $2.49
This product is not rated
Ring Gear Bolt
Differential Ring Gear Bolts

What are the top-rated 1976 Dodge B200 Differentials?

Top-rated Differentials for your 1976 Dodge B200 based on customer reviews/ratings are:
Differential Carrier Gear Kit
from $219.99
(6)
Differential Carrier Gear Kit
“Great customer service”
Differential Pinion Shim Kit
from $7.49
(1)
Differential Pinion Shim Kit
“good product”
Differential Crush Sleeve
from $2.49
(1)
Differential Crush Sleeve
“High quality, would buy again”