1976 Chevrolet Malibu Drivetrains
Find Your Specific 1976 Chevrolet Malibu Drivetrains
Below you will find various in-demand Chevrolet Drivetrains, components and accessories for your 1976 Malibu. Advance Auto Parts has popular Malibu parts like Drive Shafts and Axles, Transfer Cases, Universal Joints and more. You’ll also find aftermarket and OEM Drivetrains for other Malibu model years including
2011,
2012,
2013,
2014,
2015,
2016,
2017,
2018,
2019 and more. Select a category of 1976 Chevrolet Malibu Drivetrains below and start saving instantly.
Popular 1976 Chevrolet Malibu Drivetrains Categories
Essential Drivetrains for 1976 Chevrolet Malibus
National – Multi Purpose Seal (Part No.7412S)
from
$4.99
Product Features:
See More
- Design type: spring loaded; single-lip
- Temperature range: -40 deg. F to 225 deg. F / -40 deg. C to 107 deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Yukon Gear – 14 Plate Dura Grip Composite Clutches, GM 7.5 (Part No.16119)
from
$202.99
14 plate DURAGRIP COMPOSITE clutches, GM 7.5.
Product Features:
See More
Product Features:
- Clutch kit
- Fits GM 7.5″ and 7.625″ with Dura Grip positraction
- Steel clutches
USA Standard Gear – Ring & Pinion Gear Set For GM 8.5" In A 3.23 Ratio (Part No.36212)
from
$399.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.
Product Features:
See More
Product Features:
- Fits GM 8.5″ and 8.6″
- 8.50″ ring gear diameter
- 30 spline pinion
- 10 ring gear bolts
- 3.23 ratio
USA Standard Gear – Standard Spider Gear Set For GM 8.5", 28 Spline (Part No.39026)
from
$209.99
Product Features:
See More
- Spider gear kit
- Fits GM 8.5″ 28 spline open differential
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
Yukon Gear – 7.5" & 8.2" GM Redi Sleeve Yoke Saver (Part No.30221)
from
$136.99
7.5″ & 8.2″ GM REDI sleeve yoke saver.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion Redi-sleeve
- Fits GM 7.5″, 7.625″ and 8.2″
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)
from
$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil
Yukon Gear – Yoke For GM 8.5" With A 1310 U/Joint Size (Part No.41086)
from
$449.99
Yukon yoke for GM 8.5″ with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits GM 8.5″
- 30 spline
- 1310 u-joint size
- Outside snap ring design
- 3.219″ snap ring span
- 1.062″ cap diameter
- Strap style
Yukon Gear – Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette (Part No.55002)
from
$59.99
Product Features:
See More
- Super carrier shim kit for Ford 8.8″, GM 12 bolt passenger car and truck, GM 8.0″, 8.6″, 8.6″ IRS and 1963-1979 Corvette
- Interlocking design makes installation much easier
Yukon Gear – GM 7.5" Standard Open Side Gear Thrust Washer (Part No.33389)
from
$11.99
GM 7.5″ standard Open side gear thrust washer.
Product Features:
See More
Product Features:
- Side gear thrust washer
- Fits GM 7.5″
Yukon Gear – Bearing Race Driver (Part No.56022)
from
$188.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits M86610 race
- All steel construction
Yukon Gear – Axle Seal For 5707 Or 1563 Bearing (Part No.30196)
from
$6.99
Axle seal for 5707 OR 1563 bearing.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Rear axle seal
- 2.250″ O.D.
Yukon Gear – C/Clip For GM 7.5", 7.6" & 8" (Part No.33082)
Motive Gear – Pinion Nut (Part No.1260823)
from
$9.29
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
See More
Schaeffler – Shaft Seal (Part No.SS2468)
from
$5.19
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
Yukon Gear – Redi Sleeve For GM 8.5", 9.5" & 8.2" Bop Yokes (Part No.30229)
from
$57.99
8.5, 9.5, & 8.2 Buick, Oldsmobile, Pontiac GM REDI sleeve yoke saver.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion Redi-sleeve
- Fits GM 8.5″, 9.5″ and 8.2″ Buick, Oldsmobile and Pontiac
Pro-King – Differential Carrier Shim Kit (Part No.741A202)
from
$10.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications
Richmond Gear – Differential Cross Shaft (Part No.80-0269-1)
from
$64.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
Powertrax – Grip LS Traction System (Part No.LS247528)
from
$499.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More
Yukon Gear – U/Joint Strap Bolt For 14T, 7.5", And 8.5" GM (Part No.33351)
from
$8.49
U/joint strap bolt for 14T, 7.5″, and 8.5″ GM.
Product Features:
See More
Product Features:
- u-joint strap bolt for GM 10.5″ 14 bolt truck, 7.5″ and 8.5″
Yukon Gear – Chrome Moly Cross Pin Shaft For Mini-Spool For GM 12 Bolt Car And Truck (Part No.32236)
from
$61.99
Chrome Moly cross pin shaft for Mini-Spool for GM 12P and 12T HD.
Product Features:
See More
Product Features:
- Hardened cross pin shaft
- Fits GM 12 bolt passenger car and truck
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
National – Multi-Purpose Seal (Part No.5200)
from
$12.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Cast Yoke For GM 8.5" With A 1350 U/Joint Size (Part No.41092)
from
$234.99
Yukon cast yoke for GM 8.5″ with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits GM 8.5″
- 30 spline
- 1350 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.188″ cap diameter
- Strap style
MOOG Driveline Products – Universal Joint Strap Kit (Part No.530-10)
from
$25.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- For U-Joints 355, 372 & 534G
- Contains two 1.81″ bolt center clamps and four 5/16-24 x 1-5/16″ cap screws
Yukon Gear – Minor Install Kit For GM Early And Late 7.5" Differential (Part No.12050)
from
$115.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.
Product Features:
See More
Product Features:
- Fits GM 7.5″ and 7.625″
- Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
Yukon Gear – Dura Grip Positraction For GM 12 Bolt Car With 33 Spline Axles, 3.08 To 3.90 Ratio (Part No.26012)
from
$856.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.
Product Features:
See More
Product Features:
- Fits GM 12 bolt passenger car with 33 spline axles
- 3.08-3.90 ratios only
- 4-spring, clutch style positraction
- Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
- Fully rebuildable
- Assembled in the USA
Pro-King – Differential Carrier Shim Kit (Part No.741A200)
from
$19.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications
Yukon Gear – Ring Gear Bolt (Part No.33049)
from
$6.99
Ring gear bolt for GM 7.5″, 7.6″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ & 8.6″ IRS. 7/16″ x 20.
Product Features:
See More
Product Features:
- Ring gear bolt for GM 7.5″, 7.625″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ and 8.6″ IRS
- 7/16″ x 20
Upgrade your 1976 Chevrolet Malibu with Top-Quality Drivetrains
When it comes to maintaining or upgrading your 1976 Chevrolet Malibu, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Drivetrains are key to keeping your Malibu functioning at its best. At Advance Auto Parts, we offer a wide selection of 223 Drivetrains for the 1976 Chevrolet Malibu, designed to meet your needs without breaking the bank.
From
Drive Shafts and Axle
replacements to
Transfer Cases
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1976 Chevrolet Malibu at great prices.
Our Drivetrains inventory for this model
ranges from just $2.99 to $1,566.99, with
an average price of $227.85.
Our 223 Drivetrains in stock come from 10 trusted brands, so you’re sure to find the right part for your 1976 Chevrolet Malibu without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1976 Chevrolet Malibu, we stock popular OEM and aftermarket Drivetrains from top names
like National, Driveworks, Motive Gear, and more.
National Drivetrains
start at just $7.99 and boast an impressive 4.3 stars average rating from customers.
Driveworks and Motive Gear also bring quality to the table, with Drivetrains available starting at $7.99, and at an average 4.2 stars rating.
With 529 customer reviews and counting, our 1976 Chevrolet Malibu Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Oil and Lubricants, Fluids and Chemicals
and more to make sure your 1976 Chevrolet Malibu is always ready to roll. We’re committed to providing you with everything you need to keep your Malibu in top shape, all in one place.
Start shopping confidently below for your 1976 Chevrolet Malibu!
Best-Selling Drive Shafts and Axles for 1976 Chevrolet Malibus
Enhance the driving experience in your Chevrolet with 10 quality Drive Shafts and Axle components, starting at $6.99.
Yukon Gear – R1563Tav Rear Axle Bearing And Seal Kit (Part No.10004)
from
$42.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1563TAV axle bearing and seal kit, TorringtonBrand, 2.250″ OD, 1.400″ ID. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Includes axle bearing and seal
- Services one side
- Torrington Brand
- 2.250″ O.D.
- 1.400″ I.D.
Yukon Gear – R1559Tv Rear Axle Bearing And Seal Kit (Part No.10001)
from
$52.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1559TV axle bearing and seal kit, TorringtonBrand, 2.530″ OD, 1.620″ ID This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Includes axle bearing and seal
- Services one side
- Torrington Brand
- 2.530″ O.D.
- 1.620″ I.D.
Yukon Gear – C/Clip (Part No.33083)
from
$8.99
C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.
Product Features:
See More
Product Features:
- c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
- .150″ thick
Yukon Gear – Axle Seal, For 1559 Or 6408 Bearing (Part No.30201)
from
$7.99
Axle seal, for 1559 OR 6408 bearing, NOT COARSE spline 12T.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Rear axle seal
- 2.530″ O.D.
Yukon Gear – C/Clip For GM 7.5", 7.6" & 8" (Part No.33082)
National – Shaft Repair Sleeve (Part No.99125)
from
$30.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
Yukon Gear – Yoke For 8.5" Or 8.6" GM (Mech 3R) With A U/Joint Size And Triple Lip Design (Part No.41071)
from
$226.99
Yukon yoke for 8.5″ or 8.6″ GM (mech 3R) with a U/joint size and triple lip design. 2.556″ snap ring span, 1.125″ cap diameter. Inside snap ring. This yoke uses inside snap rings. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits GM 8.5″ and 8.6″
- 30 spline
- Mechanics 3R u-joint size
- 2.556″ snap ring span
- 1.125″ cap diameter
- Inside snap ring design
- Strap style
Yukon Gear – Forged Yoke For GM 8.5" With A 1350 U/Joint Size (Part No.41093)
from
$359.99
Yukon forged yoke for GM 8.5″ with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits GM 8.5″
- 30 spline
- 1350 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.188″ cap diameter
- Forged steel
Yukon Gear – 7.5" & 8.2" GM Redi Sleeve Yoke Saver (Part No.30221)
from
$136.99
7.5″ & 8.2″ GM REDI sleeve yoke saver.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion Redi-sleeve
- Fits GM 7.5″, 7.625″ and 8.2″
Yukon Gear – Axle Seal For 5707 Or 1563 Bearing (Part No.30196)
from
$6.99
Axle seal for 5707 OR 1563 bearing.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Rear axle seal
- 2.250″ O.D.
Most Popular 1976 Chevrolet Malibu Transfer Cases
Customize your Chevrolet with 3 Transfer Cases products
like Input Shaft Seals and
Mounting Adapter Seals, all
priced under $12.99.
National – Multi-Purpose Seal (Part No.5200)
from
$12.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
National – Multi-Purpose Seal (Part No.9613S)
from
$7.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.7412S)
from
$4.99
Product Features:
See More
- Design type: spring loaded; single-lip
- Temperature range: -40 deg. F to 225 deg. F / -40 deg. C to 107 deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Top Picks for 1976 Chevrolet Malibu Universal Joints
Upgrade Chevrolet Malibus with top-quality Universal Joints parts, including 13 OEM and aftermarket selections for your 1976 model.
Neapco – Universal Joint (Part No.2-3011)
Yukon Gear – 1310 U/Joint With Zerk Fitting On Cross (Part No.42008)
from
$44.99
Yukon 1310 U/Joint with zerk fitting on cross. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring.
See More
Yukon Gear – 1310 To 1330 Adapter U/Joint (Part No.42005)
from
$59.99
Yukon 1310 to 1330 adapter U/Joint. The 1310 side has a 3.219″ span and 1.062″ caps. The 1330 side has a 3.625″ span and 1.062″ caps. Both sides are outside snap ring.
See More
Yukon Gear – 1350 To 1410 Conversion U/Joint (Part No.42006)
Yukon Gear – 1310 To Mechanics 3R Adapter U/Joint (Part No.42013)
Yukon Gear – 1350 Lifetime Series U/Joint (Part No.42021)
from
$63.99
Yukon 1350 Lifetime Series U/Joint. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring.
See More
Yukon Gear – Cast Yoke For GM 8.5" With A 1350 U/Joint Size (Part No.41092)
from
$234.99
Yukon cast yoke for GM 8.5″ with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits GM 8.5″
- 30 spline
- 1350 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.188″ cap diameter
- Strap style
Yukon Gear – 1350 U/Joint With Zerk Fitting (Part No.42010)
from
$51.99
Yukon 1350 U/Joint with zerk fitting. 3.625″ snap ring span, 1.118″ cap diameter. Outside snap ring.
See More
Yukon Gear – 7.5" And 8.5" GM Rear U/Joint Strap, Mech 3R (Part No.41201)
from
$23.99
7.5″ and 8.5″ GM rear U/joint strap, Mech 3R.
Product Features:
See More
Product Features:
- u-joint strap
- Fits GM 7.5″, 7.625″ and 8.5″
- Mechanics 3R u-joint size
- One single strap
Yukon Gear – 1310 Lifetime U/Joint (Part No.42003)
from
$57.99
1310 Yukon Lifetime U/joint. 1.718″ snap ring span, 1.062″ cap diameter. Inside snap ring.
See More
Yukon Gear – 1350 To Mechanics 3R Adaptor U/Joint (Part No.42001)
Yukon Gear – Mechanics 3R U/Joint (Part No.42014)
from
$46.99
Yukon Mechanics 3R U/Joint. 2.556″ snap ring span, 1.125″ cap diameter. Inside snap ring.
See More
Yukon Gear – U/Joint Strap Bolt For 14T, 7.5", And 8.5" GM (Part No.33351)
from
$8.49
U/joint strap bolt for 14T, 7.5″, and 8.5″ GM.
Product Features:
See More
Product Features:
- u-joint strap bolt for GM 10.5″ 14 bolt truck, 7.5″ and 8.5″
In-Demand Differentials for 1976 Chevrolet Malibus
Select from 197 premium Differentials parts for your 1976 Chevrolet Malibu, with prices ranging from $2.99 to $1,566.99.
Driveworks – Oil Seal (Part No.S-2043)
from
$10.79
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Motive Gear – Differential Pinion Shim Kit (Part No.1100)
from
$7.99
High-quality Differential Component Shim
Product Features:
See More
Product Features:
- SHIM KIT FITS-8.25-F7.5-AMC20-GM0
Motive Gear – Differential Ring and Pinion (Part No.GM10-342A)
Motive Gear – Differential Ring and Pinion (Part No.GM10-373A)
National – Differential Pinion Seal (Part No.2043)
from
$17.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Motive Gear – Differential Ring and Pinion (Part No.GM10-373)
Motive Gear – Differential Master Bearing Kit – Timken (Part No.R10RMKT)
from
$135.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- KIT BRG & SEAL GM 10 BOLT MASTER NON IFS FRONT / REAR
Mr. Gasket – Differential Cover Kit (Part No.9891)
from
$77.99
Add some bling to the underside of your car with Mr. Gasket’s chrome differential cover. This chrome-plated steel cover is made to fit GM 10-bolt with 8 1/2 in ring gear. Is a complete kit with a gasket and bolts.
Product Features:
See More
Product Features:
- Made Of Chrome Plated Steel
- Fits GM 8.5-Inch 10 Bolt
- Complete Kit With Gasket And Bolts
Motive Gear – Differential Carrier Shim Kit (Part No.1101)
from
$8.99
High-quality Differential Carrier Shim Kit
Product Features:
See More
Product Features:
- CARRIER SHIMS 12 BOLT GM CAR & TRUCK ALSO GM8.6″ 99-ON
Motive Gear – Pinion Nut (Part No.1260823)
from
$9.29
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
See More
Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)
from
$57.99
3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.
Product Features:
See More
Product Features:
- Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive
Yukon Gear – 3 Qt – Penzoil 80W90 Conventional Gear Oil (Part No.15002)
from
$44.99
3 Qt. Penzoil 80W90 conventional gear Oil.
Product Features:
See More
Product Features:
- Includes three quarts of conventional oil
Motive Gear – Ring Gear Bolt (Part No.14066913)
Yukon Gear – Ring Gear Bolt (Part No.33049)
from
$6.99
Ring gear bolt for GM 7.5″, 7.6″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ & 8.6″ IRS. 7/16″ x 20.
Product Features:
See More
Product Features:
- Ring gear bolt for GM 7.5″, 7.625″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ and 8.6″ IRS
- 7/16″ x 20
Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)
from
$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.
Product Features:
See More
Product Features:
- Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
- 1/2″ head
Motive Gear – Crush Sleeve (Part No.1234726)
from
$4.99
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
See More
Yukon Gear – Minor Install Kit For GM 8.5" Rear Differential (Part No.12055)
from
$48.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush. (includes Supershims)
Product Features:
See More
Product Features:
- Fits GM 8.5″ rear
- Included are a pinion seal, crush sleeve , complete shim kit, marking compound and brush.
Yukon Gear – Chrome Cover For 8.6", 8.5" And 8.2" GM Rear (Part No.32017)
from
$74.99
Chrome cover for 8.6″, 8.5″ and 8.2″ GM rear.
Product Features:
See More
Product Features:
- Fits GM 8.2″, 8.5″ and 8.6″
- Chrome
Yukon Gear – Pinion Nut (Part No.33152)
from
$9.99
Pinion nut for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.0″, 8.25″, 8.5″, 8.6″, 9.25″ IFS, 9.5″ & Oldsmobile Dropouts. 1 1/4″ socket, 7/8″ x 14 thread.
Product Features:
See More
Product Features:
- Pinion nut for GM 7.2″, 7.5″, 7.625″, 8.0″, 8.25″ IFS, 8.5″, 8.6″, 9.25″ IFS and 9.5″
- 7/8″ x 14 thread
- 1 1/4″ socket
Motive Gear – Differential Pinion Shim Kit (Part No.1104)
USA Standard Gear – Standard Spider Gear Set For GM 8.5", 30 Spline (Part No.39027)
from
$214.99
Product Features:
See More
- Spider gear kit
- Fits GM 8.5″ 30 spline open differential
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)
from
$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)
from
$27.99
8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.
Product Features:
See More
Product Features:
- Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″
Motive Gear – Differential Carrier Gear Kit (Part No.GM10BI)
Top-Rated Drivetrains Brands For Your 1976 Chevrolet Malibu
Shop for the best-rated brands offering Drivetrains and other products for your 1976 Chevrolet Malibus. Below you’ll find some of our best rated Drivetrains from National, Driveworks, and Motive Gear, and more. Drivetrains from these brands that fit a 1976 Malibu start at just $7.99 and are rated as high as 4.3 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.
Popular National 1976 Chevrolet Malibu Drivetrains
When it comes to maintaining or upgrading your 1976 Chevrolet Malibu, using quality Drivetrains is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Drivetrains, specifically designed for the 1976 Chevrolet Malibu. With over 3 National brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $7.99, with an average price of just $12.99. Plus, with over 18 customer reviews and an average rating of 4.3 stars, you can trust that our National Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$7.99
(8)
Multi-Purpose Seal
“This seal should be located at the REAR of the TRANS, in FRONT of the TRANSFER CASE, BETWEEN trans and transfer case.”
Popular Driveworks 1976 Chevrolet Malibu Drivetrains
Driveworks auto parts is one of the highest quality Drivetrain brands in the market. Any 1976 Chevrolet Malibu owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 1976 Malibu, Advance Auto Parts carries a full inventory of 1 Driveworks Drivetrains. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Driveworks Drivetrains range up to $10.79, plus, with more than 1 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.
from
$10.79
(1)
Oil Seal
“Didn’t fit my 1992 K1500 10 bolt 8.5″ ring gear rear end. Was told wrong part.”
FAQs for 1976 Chevrolet Malibu Drivetrains
Which Drivetrains are best-sellers for 1976 Chevrolet Malibus?
Out of 223 Drivetrains that fit 1976 Chevrolet Malibus, the following parts are the top sellers:
- 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (11645418) – $57.99
- Ring Gear Bolt (20520168) – $2.99
- 3 Qt – Penzoil 80W90 Conventional Gear Oil (11644279) – $44.99
What’s the price range for 1976 Chevrolet Malibu Drivetrains?
Drivetrain prices for the 1976 Chevrolet Malibu start at $2.99 and go up to $1,566.99 for the most premium parts.
What’s the average price of a Drivetrain for a 1976 Chevrolet Malibu?
The average price for Drivetrains for the 1976 Chevrolet Malibu is $227.85. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Drivetrains for other Chevrolet Malibu model years?
What are the cheapest Drivetrains for my 1976 Chevrolet Malibu?
The cheapest 1976 Chevrolet Malibu Drivetrains we carry in stock are:
- Ring Gear Bolt (20520168) – $2.99
- Universal Joint (5270111) – $4.59
- Multi Purpose Seal (18444966) – $4.99
- Crush Sleeve (10715253) – $4.99
- Crush Sleeve (11643168) – $5.99
What are the top-rated Drivetrains that fit the 1976 Chevrolet Malibu?
Out of 529 reviews by customers, our 1976 Chevrolet Malibu Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 1976 Chevrolet Malibu and their top-rated products:
- Differentials
- Differential Pinion Shim Kit (20520100) – $7.99
- Oil Seal (5440297) – $10.79
- Differential Ring and Pinion (19640014) – $234.99
- Transfer Cases
- Differential Pinion Shim Kit (20520100) – $7.99
- Oil Seal (5440297) – $10.79
- Differential Ring and Pinion (19640014) – $234.99
- Universal Joints
- Differential Pinion Shim Kit (20520100) – $7.99
- Oil Seal (5440297) – $10.79
- Differential Ring and Pinion (19640014) – $234.99
What types of Drivetrains do you sell for my 1976 Chevrolet Malibu?
As of 3/1/26, these are some of the most in-demand types of Drivetrains for a 1976 Chevrolet Malibu:
Can I get help with 1976 Chevrolet Malibu Drivetrain orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Drivetrains and more.
What is your return policy for Chevrolet Malibu Drivetrains?
Advance Auto Parts keeps returns simple. For new Chevrolet Malibu Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
