1976 Chevrolet Corvette Differentials

Essential 1976 Chevrolet Corvette Differentials

National – Bearings (Part No.A-69)

Bearings

from

$244.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Redline Synthetic "Shock Proof" Oil - 3 Quarts

from

$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:
  • Includes three quarts of Redline Shockproof oil
See More

National – Bearings (Part No.M88010)

Bearings

from

$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Ring Gear Bolt (Part No.33046)

Ring Gear Bolt

from

$6.99
Ring gear bolt for GM 12 bolt car & truck, 8.2″, 8.2″ for Buick/Olds/Pontiac, 63-79 Corvette & 55-62 GM Car & Truck. 3/8″ x 24.

Product Features:
  • Ring gear bolt for GM 12 bolt passenger car and truck, 1955-1964 passenger car and truck, GM 8.2″, 8.2″ Buick, Oldsmobile and Pontiac and 1963-1979 Corvette
  • 3/8″ x 24 thread
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Yukon Gear – 3/8" Ring Gear Bolt Washer For GM 12 Bolt Car & Truck, 8.2 Bop & More (Part No.33347)

3/8" Ring Gear Bolt Washer For GM 12 Bolt Car & Truck, 8.2 Bop & More

from

$4.99
3/8″ ring gear bolt washer for GM 12 bolt car & truck, 8.2 BOP & more.

Product Features:
  • Ring gear bolt washer for GM 12 bolt car and truck, 1955-1964 passenger car, 1963-1979 Corvette and 8.2″ Buick, Oldsmobile and Pontiac
See More

Driveworks – Taper Bearing Set (Part No.S-A-6)

Taper Bearing Set

from

$10.29
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Felpro – DIFFERENTIAL GASKET (Part No.RDS 13314-1)

DIFFERENTIAL GASKET

from

$5.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Motive Gear – Differential Carrier Shim Kit (Part No.1101)

Differential Carrier Shim Kit

from

$8.49
High-quality Differential Carrier Shim Kit

Product Features:
  • CARRIER SHIMS 12 BOLT GM CAR & TRUCK ALSO GM8.6″ 99-ON
See More

Powertrax – No-Slip Traction System (Part No.9207883005)

No-Slip Traction System

from

$551.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Yukon Gear – Dana 44 Pinion Gear Thrust Washer (Part No.33281)

    Dana 44 Pinion Gear Thrust Washer

    from

    $4.99
    Dana 44, GM55P & 8.2″ GM pinion gear Thrust washer.

    Product Features:
    • Pinion gear thrust washer for Dana Spicer 44, GM 8.2″ and 1955-1964 GM passenger car
    See More

    Mr. Gasket – Differential Cover Kit (Part No.9894)

    Differential Cover Kit

    from

    $75.99
    The Mr. Gasket chrome plated rear end cover is made from heavy-gauge steel, and comes complete with bolts and gaskets.

    Product Features:
    • Chrome plated steel for looks
    • Includes bolts and gasket
    See More

    Driveworks – Camshaft Seal (Part No.S-99139)

    Camshaft Seal

    from

    $23.99
    Product Features:
    • Brand may vary by location
    See More

    Powertrax – Grip LS Traction System (Part No.LS231230)

    Grip LS Traction System

    from

    $480.99
    For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
    See More

    Motive Gear – Differential Mini Spool (Part No.MS10-28)

    Differential Mini Spool

    from

    $98.99


    Product Features:
    • MINI SPOOL GM 10 BOLT 8 1/2″ 28 SPLINE
    See More

    Yukon Gear – Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement (Part No.33163)

    Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement

    from

    $3.99
    Replacement pinion nut washer for Dana 25, 27, 30, 36, 44 & 53.

    Product Features:
    • Pinion nut washer for Dana Spicer 25, 27, 30, 44 and 50
    See More

    Yukon Gear – Bearing Race Driver (Part No.56015)

    Bearing Race Driver

    from

    $215.99
    Bearing race driver. No return.

    Product Features:
    • Bearing race driver
    • Fits HM88610 race
    • All steel construction
    See More

    Yukon Gear – Pinion Install Kit For GM 55P And 55T Differential (Part No.13060)

    Pinion Install Kit For GM 55P And 55T Differential

    from

    $276.99
    Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

    Product Features:
    • Fits 1955-1964 GM truck and passenger car
    • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
    See More

    Yukon Gear – Standard Open Cross Pin Shaft For GM 8.2" And 55P (Part No.33407)

    Standard Open Cross Pin Shaft For GM 8.2" And 55P

    from

    $96.99
    Standard Open cross pin shaft for GM 8.2″ and 55P.

    Product Features:
    • Cross pin shaft
    • Fits GM 8.2″ and 1955-1964 passenger car
    See More

    Yukon Gear – Pinion Nut (Part No.33150)

    Pinion Nut

    from

    $11.99
    Pinion nut for GM 12 bolt car & truck, 55-62 car & truck, 8.2″, 8.2″ Buick/Olds/Pontiac & 63-79 Corvette. 1 1/8″ socket, 7/8″ x 16 thread.

    Product Features:
    • Pinion nut for GM 12 bolt car and truck, 8.2″, 8.2″ Buick, Oldsmobile and Pontiac and 1963-1979 Corvette
    • 7/8″ x 16 thread
    • 1 1/8″ socket
    See More

    Richmond Gear – RngPnn (Part No.49-0021-1)

    RngPnn

    from

    $432.99
    RngPnn

    Yukon Gear – Replacement Crush Sleeve For Dana 44-HD (Part No.33086)

    Replacement Crush Sleeve For Dana 44-HD

    from

    $17.99
    Replacement crush sleeve for Dana 44-HD, APROX 2.735″ long.

    Product Features:
    • Crush sleeve for Dana Spicer 44HD
    • 2.735″ tall
    See More

    Yukon Gear – Minor Install Kit For GM Chevy 55P And 55T Differential (Part No.12047)

    Minor Install Kit For GM Chevy 55P And 55T Differential

    from

    $73.99
    Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

    Product Features:
    • Fits 1955-1964 GM truck and passenger car
    • Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
    See More

    Energy Suspension – Differential Pinion Mount Grommet Set (Part No.3.1101R)

    Differential Pinion Mount Grommet Set

    from

    $13.99
    Product Features:
    • Differential Pinion Mount Grommet Set
    See More

    National – Multi Purpose Seal (Part No.5778V)

    Multi Purpose Seal

    from

    $69.99
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Design type: spring loaded; multi-lip
    • Temperature range: -100°F to 450°F; -73°C to 232°C
    • Resistant to hydrocarbon/oxygenate blends and provides superior performance
    • Provides excellent dry running capabilities, low coefficient of friction and excellent resistance to chemicals
    • Delivers quality and reliable performance for every type of repair
    See More

    Yukon Gear – Chevy ’55-’64 Car And Truck Dropout Gasket (Part No.23017)

    Chevy '55-'64 Car And Truck Dropout Gasket

    from

    $13.99
    55P Chevy Passenger Drop Out gasket.

    Product Features:
    • Cover gasket
    • Fits 1955-1964 GM passenger car
    See More

    USA Standard Gear – Bearing Kit For ’55-’64 GM Car & Truck (Part No.58048)

    Bearing Kit For '55-'64 GM Car & Truck

    from

    $198.99
    This kit uses Koyo bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

    Product Features:
    • Fits 1955-1964 GM passenger car and truck
    • Uses Koyo bearings and races
    • Included are carrier bearings and races, pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
    See More

    Pro-King – Differential Pinion Shim Kit (Part No.742G202)

    Differential Pinion Shim Kit

    from

    $5.99
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    1976 Chevrolet Corvette Differentials

    Maybe you’re in the middle of a full rebuild of that 1976 Chevrolet Corvette. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 76 different Differentials in our inventory ranging from $1.49 to $724.99. That means you can find the exact parts or products you need to keep that 1976 Chevrolet Corvette running smoothly.

    Differentials are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 1976 Chevrolet Corvette. Valvoline, National, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1976 Chevrolet Corvette, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 940 reviews in this category, some of the top rated parts include Bearings with 4.8 stars and Differential Carrier Shim Kit with 2.7 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1976 Chevrolet Corvette rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1976 Chevrolet Corvette Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1976 Chevrolet Corvette demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Corvette the best it can be. Be sure to browse some of our top Differentials brands and parts.

    FAQs for 1976 Chevrolet Corvette Differentials

    What are the most purchased Differentials for the 1976 Chevrolet Corvette?

    Out of 76 Differentials for the 1976 Chevrolet Corvette, the most popular in our inventory are:
    3 Qt - Penzoil 80W90 Conventional Gear Oil
    from $44.99
    This product is not rated
    3 Qt – Penzoil 80W90 Conventional Gear Oil
    Differential Oil
    Bearings
    from $15.99
    (9)
    Bearings
    Front Differential Pinion Bearings
    Bearings
    from $18.79
    (3)
    Bearings
    Front Differential Pinion Bearings

    What are the top-rated 1976 Chevrolet Corvette Differentials?

    Top-rated Differentials for your 1976 Chevrolet Corvette based on customer reviews/ratings are:
    Bearings
    from $10.49
    (4)
    Bearings
    “Goes with M88010 bearing cup. Application was the pinion bearing race for a Ford 9 Inch on a 1957 Ford F-100.”
    Differential Carrier Shim Kit
    from $8.49
    (3)
    Differential Carrier Shim Kit
    “worked great”
    Differential Cover Kit
    from $65.99
    (2)
    Differential Cover Kit
    “looks good”